The ipad has this nifty feature... close the case, screen shuts off. Any way to do this with the transformer?
-J
miatawnt2b said:
The ipad has this nifty feature... close the case, screen shuts off. Any way to do this with the transformer?
Click to expand...
Click to collapse
This is basically a service or app that runs in the background that works with the device's proximity or light sensor. So when something comes up very closely to the sensor, it assumes a lid of some sort is being closed so the display is then disabled.
There's a free Android app that may work out:
https://market.android.com/details?id=com.itsme4ucz.screenoff&feature=search_result​
It looks like people have gotten it to work with the HTC Flyer and the Motorola Xoom.
You could attach a small magnet where it is positioned 1.875 from the right side of the pad and .5 above the clock. This would shut the screen off like the dock does.
-Mark
xdadevelopers1222 said:
This is basically a service or app that runs in the background that works with the device's proximity or light sensor. So when something comes up very closely to the sensor, it assumes a lid of some sort is being closed so the display is then disabled.
There's a free Android app that may work out:
https://market.android.com/details?id=com.itsme4ucz.screenoff&feature=search_result​
It looks like people have gotten it to work with the HTC Flyer and the Motorola Xoom.
Click to expand...
Click to collapse
This worked a couple of times but too flakey. The folio case has magnets along the edge flap but this magnets maybe not strong enough. I don't have the dock but didn't know there was a mag on the tablet to auto shut off when it closes with the dock.
Learn something new everyday.
Tera Tike said:
You could attach a small magnet where it is positioned 1.875 from the right side of the pad and .5 above the clock. This would shut the screen off like the dock does.
-Mark
Click to expand...
Click to collapse
I tried this but it doesn't work. Do you need a strong magnet for it to work? I used the one from one of my old cellphone cases.
Did you flip it over and check to see if the polarity makes a difference?
Yes you need a 1/4x1/8 rare earth magnet not a standard one. I have put that size one in my wife's folio case and it works. Also move it around in that area for the exact trigger point.
-Mark
Tera Tike said:
Yes you need a 1/4x1/8 rare earth magnet not a standard one. I have put that size one in my wife's folio case and it works. Also move it around in that area for the exact trigger point.
-Mark
Click to expand...
Click to collapse
Would this work? Can you show pics of how you attached the magnet on the folio case, I see some glue or sewing required.
http://www.dealextreme.com/p/super-strong-rare-earth-re-magnets-8mm-20-pack-4248
Just curious this only turns off the device how about like the Ipad 2 when the flap is opened would it turn the device on?
If no, since the sensor to shut off the device is already on the tablet can this be tweeked to have it turned on? Oh, Asus . . .
That looks like it should work.
ASUS designed the dock with a magnet to trip the hall sensor in the Pad.
I have been playing with another Pad and his does not trip without having the dock but mine and my wife's does. His is a new B50 Pad and we have B40 Pads the very first ones and I have tinkered with them. There seems that there is a change somewhere or rooting did something butI don't think so.
We are going to explore this some more as he want his to trip with the folio cover.
-Mark
Any news about this???
Would be handy if I open/close my luvtab case the screen goes on/off
regards
Kef
Related
Anyone else having issues with screen locking with the VZW version? Even when I push the power button at the top my screen comes back on in the holster.
Apparently (a Sprint owner can confirm) the Sprint version has "long press end key" built in to lock the device. I noticed that if I locked the device while using TFLO3D it would somehow get unlocked without me manually doing it.
Anyone else having same issue?
I am installing S2U2 now ... will report back
Also I downloaded LockMeLite
I have the VZW TP2 and have had the same problem, usually when I would slide it into my side pouch. It's annoying.
I would rather have it lock automatically then unlock. I think there might be something built in to it that if the proximity sensor and buttons are pressed that it auto locks. Even though at times I get annoyed that I have to unlock it, I would rather that happen then pocket dial someone...
i have not confirmed this but i think that if u have a magnetic holster, than the magnet is active like the switch that turns ur phone from portraight to landscape when u slide out the keyboard. when u put the phone in the case it passes the magnet and thinks that u just opened the keyboard
@joeyc
I have seen blackberries and model-specific holsters which do that, but I believe something else here is to blame. I have noticed this issue in my pocket, and unless parts of my anatomy are magnetic, I would have to assume something else is going on.
joeyc1123 said:
i have not confirmed this but i think that if u have a magnetic holster, than the magnet is active like the switch that turns ur phone from portraight to landscape when u slide out the keyboard. when u put the phone in the case it passes the magnet and thinks that u just opened the keyboard
Click to expand...
Click to collapse
Yeah it does change the orientation of the screen as well so you could be right.
fronc said:
@joeyc
I have seen blackberries and model-specific holsters which do that, but I believe something else here is to blame. I have noticed this issue in my pocket, and unless parts of my anatomy are magnetic, I would have to assume something else is going on.
Click to expand...
Click to collapse
Yep, i was shoving it into a Blackberry holster. (until my orderd one gets here)..lol...so yeah, something definitely is going on.
i could just wave my phone infront of my case and the screen will turn on along with the orientation changing
So, is this specific to BB case which use to magnet to turn off screen when holstered (very smart), or is this an issue with all magnetic closure cases???
I haven't even found a TP2 CDMA belt case without a magnetic closure.
its an issue with all magnetic cases
From looking at other forums like ppcgeeks and others it appears that most everyone is using something like S2U2
With S2U2 installed I have no issues with my magnetic case
jcrompton said:
From looking at other forums like ppcgeeks and others it appears that most everyone is using something like S2U2
With S2U2 installed I have no issues with my magnetic case
Click to expand...
Click to collapse
S2U2 it is!
question for all of you people who have recently started using S2U2...have u noticed a significant dranage in memory or battery..the reason im asking this is bc ive always used S2U2 so i havent had a chance to notice...im trying to find ways to extend my battery life bc its horrible on the newer devices
Just make sure every option in S2U2 is turned off.
Don't enable any of the options or features. Use it purely as a lock tool.
thats really all i use it as...i dont use the caller id,appts,s2p, or anything like that...will that help to increase my battery life and memory??? also, is there any other way to increase my battery life????
Is there anyway to default to S2U2 for the lock instead of the one that's on there now?
Magnetic Cases is the problem
I first had this issue on the 6800 and it turned out to be the magnetic case. The phone has a sensor looking for a change in a magnetic field- this happens every time you take out your stylus, and so the screen turns on.
The light-powered magnet used for keeping the leather hip cases closed interferes with the sensors on the phone and cause some odd, undesirable results... I prefer to play it safe and stay away from anything magnetic on a phone this complex.
Just my 2 cents...
as far as cases themselves go, i had issues like all have described in finding the right case that wouldn't do this. The HTC branded case has more room within its pouch so it doesn't effect the screen or buttons, it's magnetic and works fine. Just figured i'd lend an alternate solution besides hardware tweeks. hope this helps
I've noticed that when I want to dock my TF that it takes a fair amount of pressure until the unit is properly locked and seated. I was wondering if this pressure could be causing any kind of damage... but more specifically with light bleed. My last TF was dropped and sustained a mild/moderate hit on the frame which clearly caused more/worse light bleed.
So I guess my question is... does anyone know a way to properly dock the TF with little or no pressure? I'm also thinking my dock might be defective... it's a B40 serial number and the locking mechanism does seem kind of cheap/shotty...
i was wondering if sliding it around to get it docked is going to eventually scratch up the tablet...i can't always get it docked in one try....would have been nicer to have a rubber type thin seal around the dock/tablet instead of metal on metal.
Hrm, my dock has a thin layer of velvety material on the inside of the docking mechanism so it's not metal on metal/glass for me...
It's pretty inevitable that the dock will eventually leave some kind of marks. I notice on the back of my tablet, if I hold it at just the right angle to the light, I can see a small curved mark appearing where it rubs against the dock as I remove the tablet.
I'm curious -- does anybody else's dock release switch stay in the "unlocked" position with the tablet removed? Mine does, but I am pretty sure when I initially got the tablet, it would spring back to the "locked" position once the tablet was removed...
jmccarter said:
Hrm, my dock has a thin layer of velvety material on the inside of the docking mechanism so it's not metal on metal/glass for me...
Click to expand...
Click to collapse
Mine has that too (they all do), but it is still starting to leave a mark on the rear of the tablet case.
i'd rather have the velvity stuff outside the docking area...on the metal casing.
knoxploration said:
I'm curious -- does anybody else's dock release switch stay in the "unlocked" position with the tablet removed? Mine does, but I am pretty sure when I initially got the tablet, it would spring back to the "locked" position once the tablet was removed...
Click to expand...
Click to collapse
When undocked, my lock seems to go to what ever position it feels like. Like I said in my first post, I think the design is pretty poor (on my B40...but perhaps on all).
GetLaid said:
When undocked, my lock seems to go to what ever position it feels like. Like I said in my first post, I think the design is pretty poor (on my B40...but perhaps on all).
Click to expand...
Click to collapse
Great, not just me then. Thanks for the confirmation...
jmccarter said:
Hrm, my dock has a thin layer of velvety material on the inside of the docking mechanism so it's not metal on metal/glass for me...
Click to expand...
Click to collapse
Same here.
Also, my tablet has a thin piece of clear plastic on the bottom where it fits into the dock. At first I thought this was part of the packaging and was going to remove it. But then I noticed there was hole for the docking port and decided to leave it in place.
jerrykur said:
Same here.
Also, my tablet has a thin piece of clear plastic on the bottom where it fits into the dock. At first I thought this was part of the packaging and was going to remove it. But then I noticed there was hole for the docking port and decided to leave it in place.
Click to expand...
Click to collapse
Oh man... I removed my piece...
So while I was looking at various case solutions for a number of tablets, I came across the repeated notion that any tablet without magnets cannot have a smart-case style clip on cover. While this is generally true, I had a thought....
The TF101 has the added bonus of having 2 great big clips on the bottom for the keyboard dock.
This lead me to wonder, how realistic would it be to make a smart cover/origami cover style case that clips to the side using these docking clips.
Once the cover can clip to the bottom, it's easy to attach that system to a chopped up existing case and boom, we have a simple clip on screen cover/stand.
I don't have the keyboard dock so I dont know how the clips work, so does anyone think there's any real potential in this?
My honest guess is that this is too ambitious and will never work, but it's always worth putting the idea out there
Edit: Crap, wrong section. Accident, my bad. Can a mod move this to accessories if that's more appropriate? Thanks
Hi!
I think the way the dock locks it up is with a switch in the hinge, which makes some kind of connection in the connector. That's just my guess though.
If I'm right, obviously the "smart TF cover" would have to include a dock connector and some kind of simple switch to do that connection...
Maybe 2 metal plates that when they touch the aluminum Bezel (and therefore contact between them is made), shut off the screen.
Someone that has dissassembled the dock can check and confirm how it works. I just bought it so I'm not willing just yet.
MrNago said:
Hi!
I think the way the dock locks it up is with a switch in the hinge, which makes some kind of connection in the connector. That's just my guess though.
If I'm right, obviously the "smart TF cover" would have to include a dock connector and some kind of simple switch to do that connection...
Maybe 2 metal plates that when they touch the aluminum Bezel (and therefore contact between them is made), shut off the screen.
Someone that has dissassembled the dock can check and confirm how it works. I just bought it so I'm not willing just yet.
Click to expand...
Click to collapse
To be honest, making it do the "smart" stuff like that would be awesome but is also more complicated than I was thinking.
I was just looking at it doesn't look like theres even a dumb version of the smart cover, which is essentially what I was thinking.
I mean this as in, it doesnt need to control the display, it just seems like a more stylish, slimline way to protect the screen and use as a stand if it clips onto the side and only covers one face of the tablet.
I bought my tablet with the TF201 keyboard a while back since its identical to the TF700 keyboard. It's always connected and locked, but every once in a while i notice my external mouse, which is plugged into the usb port of the keyboard, stops working due to the fact that the keyboard magically unlocks itself from the tablet. the lock bar or whatever it's called doesn't retract though so I can never tell unless I try to slightly lift the tablet away from the keyboard and lo and behold it comes right off. I noticed this tends to happen more often when the tablet is opened about 100 or so degrees from the keyboard.
Do you think I may have a faulty keyboard or has this happened to others?
Mine locks properly, so I can at least say it's not normal.
Mine locks safely too. But I do have to push relatively hard until it "clicks" into the dock and to be extra safe I tend to slide the lock slider all the way to the right.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
+1. I've had my TF700 + dock since July 16, 2012. No issues as far as connections between them are concerned, though the tab sits a little loose. The clasps don't grab the tablet tightly anymore. There is some play about 5 degrees. Anyone knows how it can be tightened again?
airmark said:
Mine locks safely too. But I do have to push relatively hard until it "clicks" into the dock and to be extra safe I tend to slide the lock slider all the way to the right.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
That's the weird thing though, mine clicks and locks but i can only push the slider to the mid point.
My Transformer doesn't stay tight on the dock any more, because the tiny little clip inside the tablet itself has broken on one side (I think). The result is that it seem to clip in correctly, but then I can rotate it to the right and the left clip come free without any resistance.
I've done quick searches to find people with similar problems, but haven't found anyone else yet. Doesn't look very fixable, due to the size of the small clip. Don't know if you've got the same issue, but to check, look where the dock latches onto the tablet with a good light and see if your clips are still there.
oblib__ said:
My Transformer doesn't stay tight on the dock any more, because the tiny little clip inside the tablet itself has broken on one side (I think). The result is that it seem to clip in correctly, but then I can rotate it to the right and the left clip come free without any resistance.
I've done quick searches to find people with similar problems, but haven't found anyone else yet. Doesn't look very fixable, due to the size of the small clip. Don't know if you've got the same issue, but to check, look where the dock latches onto the tablet with a good light and see if your clips are still there.
Click to expand...
Click to collapse
Amazing... we both post on the same day... could be this is the start of an epidemic of broken platic clips inside the tablet section. Not sure if they are plastic or metal but they do look plastic and in any case clearly are not fit for purpose of docking/undocking dozens of times a day.
I sent mine back... see my post. They are blaming me! I barely had it 6 weeks and it never left my house. Never dropped. Only ocassionally used extra force to dock it because if you don't then the locking tab does not click!!!! SIGH
the only problem that i have with the dock is that the spring in the hinge has gotten loose
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
wailim_2002 said:
Amazing... we both post on the same day... could be this is the start of an epidemic of broken platic clips inside the tablet section. Not sure if they are plastic or metal but they do look plastic and in any case clearly are not fit for purpose of docking/undocking dozens of times a day.
I sent mine back... see my post. They are blaming me! I barely had it 6 weeks and it never left my house. Never dropped. Only ocassionally used extra force to dock it because if you don't then the locking tab does not click!!!! SIGH
Click to expand...
Click to collapse
I posted in your thread as well -- locking pin snapped off yesterday. It is plastic, which makes it a Prime example <pun intended> of use of plastic in places that could do with metal. :S I'm going to take it up with ASUS Netherlands once my blood pressure comes within more or less normal limits.
MartyHulskemper said:
I posted in your thread as well -- locking pin snapped off yesterday. It is plastic, which makes it a Prime example <pun intended> of use of plastic in places that could do with metal. :S I'm going to take it up with ASUS Netherlands once my blood pressure comes within more or less normal limits.
Click to expand...
Click to collapse
We should track our own and any subsequent replies over time ... as long as it takes ... really ASUS should consider recalling these to reinforce the pins. Its highly likely some will witness their tablet fall off the dock and smash in front of their eyes... while assuming they forgot to secure it properly!
I have confirmed that It was plastic materials.
When it first happened to me about 1.5 months ago, ( at that Time, I didn't know why it was doing that)
I noticed that my Tf700 does not lock properly, doesn't make a clicking sound, doesn't hold the device in place,,,and etc.
So at that point, i decided to pull it out of the key board ( i always had it with my keyboard as it was mostly used for my university lectures)
As soon as I pulled it out, i noticed that plastic pieces about ~5mm fall out.
So as of now, my solution was to have an armour-like screen protector and skinomi carbon series (to add a bit of bulk).
It doesn't lock in, but it s enough to have friction to hold it in place a lil more nicely.
I used quite a few strips of heavy-duty doublesided tape.
choiyt317 said:
I have confirmed that It was plastic materials.
When it first happened to me about 1.5 months ago, ( at that Time, I didn't know why it was doing that)
I noticed that my Tf700 does not lock properly, doesn't make a clicking sound, doesn't hold the device in place,,,and etc.
So at that point, i decided to pull it out of the key board ( i always had it with my keyboard as it was mostly used for my university lectures)
As soon as I pulled it out, i noticed that plastic pieces about ~5mm fall out.
So as of now, my solution was to have an armour-like screen protector and skinomi carbon series (to add a bit of bulk).
It doesn't lock in, but it s enough to have friction to hold it in place a lil more nicely.
Click to expand...
Click to collapse
Yep, I found the piece of plastic too, which is what made me look for where it came from.
I have gotten into contact with ASUS Support in the Netherlands, and without even seeing what the issue is, they said that as far as they are concerned, it is user-induced damage and therefore not covered by warranty. I am planning of getting into contact with my lawyers and just have a talk if this is something they'd be able to crack open. I'll let you guys know the outcome of said talk.
Sent from a comfortable chair from the outer ring of Purgatory. The red guy asked me to say 'hi'.
the problem i started having with my dock is ill clip it in and close it. when i come back to it and open it up the screen doesnt want to come on even if i press the power button. if anyone knows a solution for this let me know please it would be greatly appreciated.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
With regards to the broken/insecure docking issue, I've posted a POLL in the transformer forum:
http://www.transformerforums.com/fo...snapped-off-poll-you-affected.html#post257185
I would like to see how many people are affected.
oblib__ said:
My Transformer doesn't stay tight on the dock any more, because the tiny little clip inside the tablet itself has broken on one side (I think). The result is that it seem to clip in correctly, but then I can rotate it to the right and the left clip come free without any resistance.
I've done quick searches to find people with similar problems, but haven't found anyone else yet. Doesn't look very fixable, due to the size of the small clip. Don't know if you've got the same issue, but to check, look where the dock latches onto the tablet with a good light and see if your clips are still there.
Click to expand...
Click to collapse
When you say rotate it to the right do you mean lift the right side and turn the tablet anti-clockwise and then the left clip comes free...
or do you mean lift the left side and rotate it clockwise (right) and the left clip comes free? :cyclops:
wailim_2002 said:
When you say rotate it to the right do you mean lift the right side and turn the tablet anti-clockwise and then the left clip comes free...
or do you mean lift the left side and rotate it clockwise (right) and the left clip comes free? :cyclops:
Click to expand...
Click to collapse
Choice 2. My left clip is broken, so the left side can lift free. Doing so causes it to rotate clockwise (right).
wailim_2002 said:
When you say rotate it to the right do you mean lift the right side and turn the tablet anti-clockwise and then the left clip comes free...
or do you mean lift the left side and rotate it clockwise (right) and the left clip comes free? :cyclops:
Click to expand...
Click to collapse
oblib__ said:
Choice 2. My left clip is broken, so the left side can lift free. Doing so causes it to rotate clockwise (right).
Click to expand...
Click to collapse
On mine, both clips have degraded severely. However, the release from the dock is right side first.
Broken left clip here... I noticed it today. And I'm pissed. What a BIG FAIL from Asus. I won't even bother trying to get it repaired, it's unlocked anyway.
I was beginning to love this thing since I installed CleanROM Inheritence... It's was a nice and fast tab. Well, now it's a broken and fast tab. I'm thinking of selling it before it falls into pieces. It's sad because I love the size, the keyboard, Android, etc.
The right clip will probably fail soon too. What a let down...
Hello,
i bought a flip cover for my Galaxy Note 8.0.
When i open it, the screen goes on as expected. However when is turned all the way to the back of the Note, the screen goes off!
It seems that also the back camera has a sensor and understands when i do this the screen should turn off.
Any suggestions to fix this?
is this and official case? if not then i'd suspect either you have one with too strong a magnet, an unshielded magnet or both.
madsquabbles said:
is this and official case? if not then i'd suspect either you have one with too strong a magnet, an unshielded magnet or both.
Click to expand...
Click to collapse
hello,
no it is not the official case, so probably this is what you indicated.
Is there a way to stop the tablet from recognizing the case totally?
so far the only way is to cut out the magnet until someone figures out how to disable it. you'll most likely need root to do so.
madsquabbles said:
so far the only way is to cut out the magnet until someone figures out how to disable it. you'll most likely need root to do so.
Click to expand...
Click to collapse
thanks, any idea where exactly is this magnet?
i believe it's inside near where the case meets the edge of the device. run a magnet around it to verify the exact spot.