Database Info

Sensation XE

So i got a new sensation XE, i want to root it and install custom roms and stuff, but is there a high chance i could brick the sensation permanently?

There are always chances of bricking phone. If you follow guide proper it will reduce this. In my opinion if you r really scared of bricking it phone don't root or get iPhone or Nokia where you can't do anything with system OS.
Sent from my HTC Sensation Z710e using xda premium

i followed the guide on S-off, unlocking, clockwork, root ......
Step 1- S-off done
Step 2 - recovery done
Step 3 - Permanently root done
but when i reboot my sensation XE, it is still booting to my normal HTC screen.
how can i check if above 3 steps are really successful?
I looked under Settings, About Phone, software information and it is still showing:
andriod version 2.3.4
HTC sense version 3.0
Software number 1.73.707.4
More...
Kernel version
2.6.35.13-gedc56fa
[email protected]#1
SMP PREEMPT Wed Oct5 12:18:44 CST 2011
Baseband version
11.65.3504.00U_11.19.3504.29_2
Build number
1.73.707.4 CL177617 release-keys
Browser version
Webkit/533.1

xyzabcxx said:
i followed the guide on S-off, unlocking, clockwork, root ......
Step 1- S-off done
Step 2 - recovery done
Step 3 - Permanently root done
but when i reboot my sensation XE, it is still booting to my normal HTC screen.
how can i check if above 3 steps are really successful?
I looked under Settings, About Phone, software information and it is still showing:
andriod version 2.3.4
HTC sense version 3.0
Software number 1.73.707.4
More...
Kernel version
2.6.35.13-gedc56fa
[email protected]#1
SMP PREEMPT Wed Oct5 12:18:44 CST 2011
Baseband version
11.65.3504.00U_11.19.3504.29_2
Build number
1.73.707.4 CL177617 release-keys
Browser version
Webkit/533.1
Click to expand...
Click to collapse
Try installing an app that requires root or flashing a ROM.

xyzabcxx said:
i followed the guide on S-off, unlocking, clockwork, root ......
Step 1- S-off done
Step 2 - recovery done
Step 3 - Permanently root done
but when i reboot my sensation XE, it is still booting to my normal HTC screen.
how can i check if above 3 steps are really successful?
Click to expand...
Click to collapse
1. Turn off fast boot (settings -> power), shut down your phone, hold volume down and press/hold power button until it boots into bootloader screen. If it says Revolutionary and S-OFF at the top you're ok.
2. From the same bootloader screen, select recovery with volume down key and confirm with pressing power key, it should take you to Clockworkmod recovery (or whatever recovery you installed). If it doesn't, you need to install CWM or some other custom recovery.
3. Install app that requires root, for example Titanium Backup.
If everything is ok, then you can go ahead and flash a custom rom from recovery if you want.

DrMadman said:
1. Turn off fast boot (settings -> power), shut down your phone, hold volume down and press/hold power button until it boots into bootloader screen. If it says Revolutionary and S-OFF at the top you're ok.
2. From the same bootloader screen, select recovery with volume down key and confirm with pressing power key, it should take you to Clockworkmod recovery (or whatever recovery you installed). If it doesn't, you need to install CWM or some other custom recovery.
3. Install app that requires root, for example Titanium Backup.
If everything is ok, then you can go ahead and flash a custom rom from recovery if you want.
Click to expand...
Click to collapse
Many thanks.
1. S-Off enabled
2. ClockworkMod working
3. Able to install Titanium Backup.
will try to install the insertcoin ROM...

xyzabcxx said:
Many thanks.
1. S-Off enabled
2. ClockworkMod working
3. Able to install Titanium Backup.
will try to install the insertcoin ROM...
Click to expand...
Click to collapse
Good progress. Nicely done.
You're well on the way to a world of NAND backups, restores, firmware, radio and rom flashes. Oh and superwipes.
Welcome to the wonderful rooted world of the HTC Sensation

Sob.. After flashing, Insertcoin 4.3.2, i am stuck at HTC bootup screen.
It is not continuing to boot.

Did you install the firmware that is needed for ICS ROM's?
http://forum.xda-developers.com/showthread.php?t=1412618

xyzabcxx said:
Sob.. After flashing, Insertcoin 4.3.2, i am stuck at HTC bootup screen.
It is not continuing to boot.
Click to expand...
Click to collapse
you have to install latest ICS firmware or otherwise it will stuck at bootscreen
Sent from my HTC Sensation using XDA App

xyzabcxx said:
Sob.. After flashing, Insertcoin 4.3.2, i am stuck at HTC bootup screen.
It is not continuing to boot.
Click to expand...
Click to collapse
Install new firmware - look at my radio link in my sig,
Superwipe!!!!!
Install your ROM of choice.
That should do it for you.

Jump1ng said:
Did you install the firmware that is needed for ICS ROM's?
http://forum.xda-developers.com/showthread.php?t=1412618
Click to expand...
Click to collapse
Yes, i installed the 3.12 firmware.

xyzabcxx said:
Yes, i installed the 3.12 firmware.
Click to expand...
Click to collapse
Did you superwipe before installing the new rom?

Thanks everyone for your help.
I skipped a step on wipe data, and this caused the problem.
It is all ok now.

After flashing with Insertcoin 4.3.2 ICS,
My software information is now showing:
andriod version: 4.0.3
HTC sense version: 3.5
Software number: Insertcoin 4.3.2 by baadnewz
Kernel version:
3.0.13-g275cdc3
[email protected]#1
SMP PREEMPT Fri Dec 30 17:43:04 CST 2011
Baseband version:11.65.3504.00U_11.19.3504.29_2
Build number: 3.12.401.2 CL250230 release-keys
Browser version: Webkit/534.30
Sorry, i mean FM radio doesn't seems to work...

Wow create your own thread. Way to hi-jack mine.
My friend bricked his Sensation, trying to turn S-On again, so i guess im not going to root my phone yet until i have alot of time.

HTC Sensation XE flash radio failed

Guys,
After i upgrade my firmware and ROM. I haven't flash the radio to 11.68.3504.00U_11.21.3504.13_2 always running into trouble when i tried to flash "writing... FAILED (remote: not allowed)".
Any other way to fix this? Please help.. thankx.
My current specs for my devices follows:
Device: HTC Sensantion XE
Android: 4.0.3 (Ice Cream Sandwich)
HTC ROM Base: 3.12.401.102
ROM: Adroid Revolution HD 6.0.3
Kernel: 3.0.13-g275cdc3
Radio: 11.19.3504.29_2
HBOOT: 1.23.0000
Recovery: 4EXT Touch: 1.0.0.3 RC1

Are you trying to flash it as a PG58IMG fiole?
If not go back and read the threadon this?
http://forum.xda-developers.com/showthread.php?t=1178143

kolokoy said:
Guys,
After i upgrade my firmware and ROM. I haven't flash the radio to 11.68.3504.00U_11.21.3504.13_2 always running into trouble when i tried to flash "writing... FAILED (remote: not allowed)".
Any other way to fix this? Please help.. thankx.
My current specs for my devices follows:
Device: HTC Sensantion XE
Android: 4.0.3 (Ice Cream Sandwich)
HTC ROM Base: 3.12.401.102
ROM: Adroid Revolution HD 6.0.3
Kernel: 3.0.13-g275cdc3
Radio: 11.19.3504.29_2
HBOOT: 1.23.0000
Recovery: 4EXT Touch: 1.0.0.3 RC1
Click to expand...
Click to collapse
Hi,
If you flash the 3.24 firmware,it has the 11.21 radio included inside.
You do not need to flash it separately.
If you are trying to upgrade to ARHD 6.1.0,then:
flash the firmware 3.24,
take the sd card out,
delete the PG58IMG.zip from your card(in your pc)
Put the card back in ,super wipe,and install 6.1.0

you cant use fasboot flash on hboot 1.23 only hboots that allow this is 1.7.x and i believe 1.27

An easier way would be to install firmware file for new ics or old ics on root of sdcard. Boot onto recovery ( ext4) flash ROM, then on ext4 in menu hit power option, reboot bootloader. flash firmware. Reboot . After reboot delete firmware file from root of sdcard.
Sent from my HTC Sensation Z710e using xda premium

I keep PG58IMG.zip files on the download part of sdcard. I just rename them PG58IMG_3.12 or 3.24. zip. Then when I'm going to change roms I use root explorer to copy PG files to root of sdcard. Rename by deleting _3.12 or _3.24.
Sent from my HTC Sensation Z710e using xda premium

rog17 said:
An easier way would be to install firmware file for new ics or old ics on root of sdcard. Boot onto recovery ( ext4) flash ROM, then on ext4 in menu hit power option, reboot bootloader. flash firmware. Reboot . After reboot delete firmware file from root of sdcard.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Just to get this right...
1.) Put the firmware file that I want to the root of my SD card.
2.) Use the actual application for 4EXt on my phone to reboot into recovery.
3.) Flash Super Wipe, Flash ROM
4.) Reboot to bootloader
5.) Flash firmware
6.) Reboot
7.) Delete firmware when I'm on my new rom and can connect it to the PC again.
Won't I get asked to flash firmware between steps 2 and 3, or will I get directly into the recovery, although I have PG58IMG in the root of my SD Card? I'm not sure about that one.

You should be able to flash Rom. If you are not on the right firmware, you will boot loop. So after flash, in ext4 use power option , reboot boatloader it will flash firmware.
Sent from my HTC Sensation Z710e using xda premium

Make sure you install the right firmware for the ROM you are installing.
Sent from my HTC Sensation Z710e using xda premium

Well i already figure out why i couldn't flash my radio and other staff, the fastboot was lock. When i download the revolutionary firmware v3.24 extract it on sdcard, then flash that darn thing. After flashing, i just thought maybe i could try again to flash radio, splash1 (that sort..) using fastboot commands viola! it works.. eveything works!

kolokoy said:
Guys,
After i upgrade my firmware and ROM. I haven't flash the radio to 11.68.3504.00U_11.21.3504.13_2 always running into trouble when i tried to flash "writing... FAILED (remote: not allowed)".
Any other way to fix this? Please help.. thankx.
My current specs for my devices follows:
Device: HTC Sensantion XE
Android: 4.0.3 (Ice Cream Sandwich)
HTC ROM Base: 3.12.401.102
ROM: Adroid Revolution HD 6.0.3
Kernel: 3.0.13-g275cdc3
Radio: 11.19.3504.29_2
HBOOT: 1.23.0000
Recovery: 4EXT Touch: 1.0.0.3 RC1
Click to expand...
Click to collapse
Hello kolokoy,
With regards of your issue, I suspect that your Bootloader would read LOCKED.
This happens because of the Firmware installed when you were installing ARHD 6.0.3, This happens to be the older version of the Firmware problem where the Fastboot commands are disabled. To rectify this issue, you can try the following.
1. Install a newer RUU(firmware) Keep in mind 3.24/3.25 RUU Only Runs HTC Sense 3.6 and above. - may not support ASOP 4.0.3
2. Then install the new ARHD 6.2.1
3. Only after installing the RUU package and ARHD ROM, install the latest Radio. Make sure that the Bootloader reads "REVOLUTIONARY"
You should be fine with that.
Cheers! Remember to thanks me if it helped

CursedBat said:
Hello kolokoy,
With regards of your issue, I suspect that your Bootloader would read LOCKED.
This happens because of the Firmware installed when you were installing ARHD 6.0.3, This happens to be the older version of the Firmware problem where the Fastboot commands are disabled. To rectify this issue, you can try the following.
1. Install a newer RUU(firmware) Keep in mind 3.24/3.25 RUU Only Runs HTC Sense 3.6 and above. - may not support ASOP 4.0.3
2. Then install the new ARHD 6.2.1
3. Only after installing the RUU package and ARHD ROM, install the latest Radio. Make sure that the Bootloader reads "REVOLUTIONARY"
You should be fine with that.
Cheers! Remember to thanks me if it helped
Click to expand...
Click to collapse
Thanks for the above post, i appreciated. Unfortunately i switch ROM (InsertCoin) just to solve the issue couldn't flash the radio. With this ROM (InsertCoin) by default they added the revolutionary firmware w/c is added plus+ on customizations.

kolokoy said:
Thanks for the above post, i appreciated. Unfortunately i switch ROM (InsertCoin) just to solve the issue couldn't flash the radio. With this ROM (InsertCoin) by default they added the revolutionary firmware w/c is added plus+ on customizations.
Click to expand...
Click to collapse
It's Okay Glad your method worked out for you.

kolokoy said:
Guys,
After i upgrade my firmware and ROM. I haven't flash the radio to 11.68.3504.00U_11.21.3504.13_2 always running into trouble when i tried to flash "writing... FAILED (remote: not allowed)".
Any other way to fix this? Please help.. thankx.
My current specs for my devices follows:
Device: HTC Sensantion XE
Android: 4.0.3 (Ice Cream Sandwich)
HTC ROM Base: 3.12.401.102
ROM: Adroid Revolution HD 6.0.3
Kernel: 3.0.13-g275cdc3
Radio: 11.19.3504.29_2
HBOOT: 1.23.0000
Recovery: 4EXT Touch: 1.0.0.3 RC1
Click to expand...
Click to collapse
This is because the HBOOT in the new firmware is locked . Flash the new 3.24 Revolutionary firmware posted by mike1986. Then you will have unlocked HBOOT and u can use the fastboot command..

Help flashing 3.33 Firmware.

Hello everyone. I'm having a hard time installing firmware 3.33, every time that i have flashed it, whether the patch or the full universal, (coming from 3.32, it still shows that i am running 3.32.
Can anyone assist me in getting it upgraded properly?
Thanks and sorry for the noob question.

ravigodhwani said:
Hello everyone. I'm having a hard time installing firmware 3.33, every time that i have flashed it, whether the patch or the full universal, (coming from 3.32, it still shows that i am running 3.32.
Can anyone assist me in getting it upgraded properly?
Thanks and sorry for the noob question.
Click to expand...
Click to collapse
Did the firmware got flashed?
Did the bootloader found the PG58IMG file and did the update? It will ask you to press volume up for update and vol down for not to update..
Sent from my HTC Sensation 4G using xda premium

ganeshp said:
Did the firmware got flashed?
Did the bootloader found the PG58IMG file and did the update? It will ask you to press volume up for update and vol down for not to update..
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Yes it flashes and asks me to press power to reboot. When i go to about phone in settings it still says 3.32.

ravigodhwani said:
Yes it flashes and asks me to press power to reboot. When i go to about phone in settings it still says 3.32.
Click to expand...
Click to collapse
You can't see the phone's firmware version from settings
For checking the version
You should do
fastboot getvar version-main
Or if the hboot is 11.24.xxxx then you have 3.33
Sent from my HTC Sensation 4G using xda premium

I see, so in my build number under settings, it's supposed to say 3.32.531.14 and not 3.33?

ravigodhwani said:
I see, so in my build number under settings, it's supposed to say 3.32.531.14 and not 3.33?
Click to expand...
Click to collapse
Hi,
The only thing you can really see when you look at the phone,is that the radio has been updated to a newer version.
Also, try what Ganesh suggests to get the full picture.
Sent telepathically from my pyramid

ravigodhwani said:
I see, so in my build number under settings, it's supposed to say 3.32.531.14 and not 3.33?
Click to expand...
Click to collapse
I'm having the same problem--
After applying the "Universal" 3.33 Firmware found in the thread:
(Firmware)(July 23)User-Friendly Firmware 1.17/3.12/3.24/3.30/3.32/3.33 Universal
... Via the bootloader--
Code:
[email protected]:~$ adb shell getprop "ro.build.description"
Still shows:
Code:
[ro.build.description]: [3.32.531.14 CL356011 release-keys]
I can find no trace of any indication that my firmware was updated.
Perhaps this "Universal" firmware really only applies to non T-Mo users?
-- and the "Universal" part only applies in the sense that flashing the PG58IMG.zip -- won't brick you if you're a T-Mo user.
---

Don't confuse the firmware with the ROM.
The firmware contains lower level phone related things like the Radio and are independent of the ROM. The ROM, however, will have version dependencies for the firmware, all that will be detailed in the ROM's OP if it's a custom ROM.
What Baseband version are you on ? About Phone ........
11.76A.xxxxxxxxxxxxxxxxxxxxx is the one from the 3.33 firmware package
IIRC 11.69.xxxxxxxxxxxxxxxxxxxxxxx is the one from 3.32.
The firmware packages are named after the RUU that the new firmware was initially extracted from.

[Q] I need help about Sabsa Prime rom

I have stock rom bootloader locked non-s-off and without any recovery inspire 4g, so it's new without any modification by me, if I just unlock bootloader and install any of these recoveries (CWM or 4Ext) will it be enough? won't I need anything else like root? also is it important to have CWM or 4ext recovery? what about AmonRA recovery? and also here's my phone info will I have any bug? Is it like compatible?
Kernel version
2.6.35.10-ga375925
htc [email protected]#1
Fri Jun 22 16:53:33 CST 2012
Baseband version
12.69a.60.29U_26.17.14.11_M
Build number
3.20.502.52 CL380259 release-keys
android 2.3.5 sense 3.0

levani132 said:
I have stock rom bootloader locked non-s-off and without any recovery inspire 4g, so it's new without any modification by me, if I just unlock bootloader and install any of these recoveries (CWM or 4Ext) will it be enough? won't I need anything else like root? also is it important to have CWM or 4ext recovery? what about AmonRA recovery? and also here's my phone info will I have any bug? Is it like compatible?
Kernel version
2.6.35.10-ga375925
htc [email protected]#1
Fri Jun 22 16:53:33 CST 2012
Baseband version
12.69a.60.29U_26.17.14.11_M
Build number
3.20.502.52 CL380259 release-keys
android 2.3.5 sense 3.0
Click to expand...
Click to collapse
yes that will be enough, Cwm or 4ext it is up to you
follow "the easy ace root tool" ,it will do all the process almost automatically
http://forum.xda-developers.com/showthread.php?t=2169515
and dont forget to flash boot.img in the rom.zip
http://www.youtube.com/watch?v=5xVl2dBTnmI

[Q]How to update HTC One SV LTE Europe to Android 4.2.2? OTA update issue.

My Phone Information :
- Android Version : 4.1.2
- HTC sense 4.0
- Software : 1.17.401.5
- HTC sdk api level 4.25
- HTC extension version : HTCExtension_403_1_GA_28
- Kernel Version : [email protected]#1SMP PREEMPT
- Baseband Version : 0.12.40.00.14_2_10.49.40.11L
- Build Number : 1.17.401.5 CL177060 release-keys
- Browser version : 534.30
- k2_uL PUT SHIP S-OFF RL
- CID-11111111
- HBOOT-1.01.0000
- RADIO-0.12.40.00.14_2
- OPENDSP-V7.2.0221.1123
- emmc-boot
- dec 7 2012,03:10:20:12772
--
Problem :
- After i finish downloading the software update. The Software installation always fail. It's looking for an Europe OTA..
--
Question :
Can i manual update via fastboot?.
Do i need to Unlock my bootloader?
Do i need to change to switch s-on or s-off?..
Do i need to root my device?..

You are writing weird specs from your phone:
- In this post you are writing if you should unlock and root.
DaRkSe7eN said:
I have HTC One SV LTE Europe. Non-Rooted..
Do i need to unlock my bootloader & root my device?..
Click to expand...
Click to collapse
But above you mention, that device is S-Off with Supercid. To get this, you must be that! What's the fact now?
Above you write, you have Android 4.1.2, but this would be Software 2.14.xxx.x and you are writing 1.17.401.5, what does not fit together. Also hboot seems to be the first one.
So i think, you don't have stock recovery or other things not stock, that is why OTA fails!
Have you tried to flash the k2ul RUU to restore everything stock?
More information, please!

old.splatterhand said:
You are writing weird specs from your phone:
- In this post you are writing if you should unlock and root.
But above you mention, that device is S-Off with Supercid. To get this, you must be that! What's the fact now?
Above you write, you have Android 4.1.2, but this would be Software 2.14.xxx.x and you are writing 1.17.401.5, what does not fit together. Also hboot seems to be the first one.
So i think, you don't have stock recovery or other things not stock, that is why OTA fails!
Have you tried to flash the k2ul RUU to restore everything stock?
More information, please!
Click to expand...
Click to collapse
i just update my device from its original ICS stock ROM to its latest update 4.1.2. Not yet been rooted. and recenty bootloader is unlocked. and i haven't tried to flash r2UL RUU..
Do i need to downgrade or reflash it back from its original stock ICS 4.x.x so that i can update it to the latest update 4.2.2 and skip 4.1.2 software update?..
Is the right RUU for my phone..
RUU_K2_UL_ICS_40_HTC_Europe_1.17.401.5_R_Radio_0.1 2.40.00.14_2_10.49.40.11L_release_301902_signed.ex e
Click to expand...
Click to collapse
and i already downloaded the fastboot file.. and
OTA_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1-2.14.401.6_release_338297mseg08soslxcubit.zip
Click to expand...
Click to collapse
for my device.

But if you have 4.1.2, why are you talking about Software 1.17.xxx and hboot 1.01?
That does not fit together. And until this is not finally solved, i won't give any solutions (which could be wrong, based on wrong information).

old.splatterhand said:
But if you have 4.1.2, why are you talking about Software 1.17.xxx and hboot 1.01?
That does not fit together. And until this is not finally solved, i won't give any solutions (which could be wrong, based on wrong information).
Click to expand...
Click to collapse
The information you've seen at my thread post is my current information.
What i wanted is to upgrade my phone into 4.2.2 from current OS 4.1.2 with a software number 1.17.401.5.
My Phone Information :
- Android Version : 4.1.2
- HTC sense 4.0
- Software : 1.17.401.5
- HTC sdk api level 4.25
- HTC extension version : HTCExtension_403_1_GA_28
- Kernel Version : [email protected]#1SMP PREEMPT
- Baseband Version : 0.12.40.00.14_2_10.49.40.11L
- Build Number : 1.17.401.5 CL177060 release-keys
- Browser version : 534.30
- k2_uL PUT SHIP S-OFF RL
- CID-11111111
- HBOOT-1.01.0000
- RADIO-0.12.40.00.14_2
- OPENDSP-V7.2.0221.1123
- emmc-boot
- dec 7 2012,03:10:20:12772
Click to expand...
Click to collapse
But when i update my device from OS 4.1.2 with a software number 1.17.401.5. and install.. It fails and looking for Europe OTA..
And I think the only way to upgrade it to the latest one is to flash the latest OTA via fastboot.. That's why i downloaded :
OTA_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1-2.14.401.6_release_338297mseg08soslxcubit.zip
Click to expand...
Click to collapse
if posible..
And now i'm asking. Do i need to downgrade using :
RUU_K2_UL_ICS_40_HTC_Europe_1.17.401.5_R_Radio_0.1 2.40.00.14_2_10.49.40.11L_release_301902_signed.ex e
ICS RUU for k2ul
Click to expand...
Click to collapse
Source [ Click Here ]
and upgrade it to the latest Android version 4.2.2 directly.

I understand, what you want to get, but in short words:
Software 1.17.401.5 IS NOT Android 4.1.2!
So your info is misleading.

old.splatterhand said:
I understand, what you want to get, but in short words:
Software 1.17.401.5 IS NOT Android 4.1.2!
So your info is misleading.
Click to expand...
Click to collapse
I don't know. That's my android version and software version and i already double check it so that i can clear my device information..
Android Version : 4.1.2
Software information : 1.17.401.5
Click to expand...
Click to collapse
Please help me.. What should i do?.. I want to upgrade my device to android 4.2.2.. :crying:

You can try to flash the RUU (you've already found), but on your own risk.
If that is successful, run all the updates.

old.splatterhand said:
You can try to flash the RUU (you've already found), but on your own risk.
If that is successful, run all the updates.
Click to expand...
Click to collapse
So it means i should give it a try.. to do flash RUU downgrade.. and do software upgrade (not andriod version upgrade).. please confirm so that i can start now. and give you a feedback if it really works..
Sorry for my terms.. What i mean is "Software Version Upgrade" and not "Android Version Upgrade".. Maybe i'm confused between Software and Android Version update.. Thats all.

If your hboot is 1.xx, your device is S-off and you have Supercid (like written in your info), it can work.
And then it would be more a software downgrade, than an upgrade.

old.splatterhand said:
If your hboot is 1.xx, your device is S-off and you have Supercid (like written in your info), it can work.
And then it would be more a software downgrade, than an upgrade.
Click to expand...
Click to collapse
that's OK.. i better downgrade my original software version, android version (ICS) using this tutorial. and maybe also includes HBoot downgrade [ Click Here ]
After i downgrade. and upgrade.. It will skip the software version 1.17.401.5 and proceed to the latest one?..
Sorry i keep on repeating what you are saying. i just wanna really clear all things?..
--
Off topic question : What's the problem while installing an update if there is phone with a question mark icon?..

You don't need to downgrade hboot, because related to your information you already have the one you need.
The OTA fails because your device is not stock and/or files are missing.

old.splatterhand said:
You don't need to downgrade hboot, because related to your information you already have the one you need.
The OTA fails because your device is not stock and/or files are missing.
Click to expand...
Click to collapse
OK. Good to know that i don't need to downgrade my HBoot. Thanks.
I'll read first the tutorial about downgrading my device using RUU and then i'll proceed.

old.splatterhand said:
You don't need to downgrade hboot, because related to your information you already have the one you need.
The OTA fails because your device is not stock and/or files are missing.
Click to expand...
Click to collapse
OK. Thanks.
Good to know that i don't need to downgrade my HBoot.
So it means that i can skip the process of downgrading CID because my device is already SuperCID?. And i can start directly RUU Downgrade?.

I'm here, let me read through this then I'll post my thoughts
---------- Post added at 12:30 PM ---------- Previous post was at 12:26 PM ----------
DaRkSe7eN said:
OK. Thanks.
Good to know that i don't need to downgrade my HBoot.
So it means that i can skip the process of downgrading CID because my device is already SuperCID?. And i can start directly RUU Downgrade?.
Click to expand...
Click to collapse
Give me your modelid
Open up terminal emulator
getprop ro.aa.modelid