Database Info

Bricked, need help.

So, I bricked my Infuse last night at work when I tried installing MIUI from ROM Manager. I've been trying to unbrick using gtg's Ultimate Unbrick method, but no luck. I believe it's something to do with the Samsung Drivers since my phone is not recognized in Odin. Tried to redownload the Drivers from Samsung's website, but still doesn't work.
Any ideas?
BTW, running Windows 7 32bit

why would you install a rom that's for a different phone?
can you boot into recovery mode? did you try the "jig"?

Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.

the reason other roms pop up in rom manager is because you are using the galaxy recovery. unless it says "for infuse" (there is only one, gtg's rom) it wont work. bummer dude. im all out of ideas, never had this happen. hopefully someone who's been through this can chime in and provide some info that will help you.
on a side note, why cant you take it to an att branch and have them exchange it for you?

Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
I hope u have USB debugging turned on. If yes, u cud try this:
1. Download and install android SDK (search google for this if don't know how to).
2. Open a command prompt
3. Type in "adb reboot recovery" without quotes, and don't hit enter
4. Connect phone to PC
5. Turn the phone on
6. Wait for "samsung" to appear, and hit enter in command prompt
7. If it says "device not found", use the up arrow to get the command from history, and hit enter again. At some point, it should issue the command to the device.
8. If u can get to recovery, well, u have a way to now try to flash any other ROM.
Don't give up. Samsung has strong phones that could be got out of soft bricks most of the time.

Delete/reinstall the drivers.
Infuse 4G

Just tried Diablo's method, and it tells me command not recognized...

Download Kies on your pc to have it recognize ur phone. Run odin. Put ur phone in download mode (pull out battery, put it back in, hold both volume buttons down, plug in ur usb) and use gtg's unbrick.
Sent from my SAMSUNG-SGH-I997 using XDA App

Tried Kies before and it would never recognize the Infuse. Should I pick Galaxy?

UPDATE!!
Redownloaded Kies and installed the drivers (for the 500th or so time) and now Odin is recognizing a device. It's showing [COM3] instead of COM## but I'm letting Odin do its thing. Seems to be working... Crossing my fingers!
EDIT::
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
****in A! Thanks for the help guys!

Pat713 said:
Didn't think there would be a listed ROM in the manager if it wasn't for the phone...
Won't boot into recovery at all, Samsung pops up, then it goes blank, and Samsung pops up again. It loops like that until I pull the battery.
Was hoping to avoid having to buy something then waiting for it to arrive, as I need the phone working asap.
Click to expand...
Click to collapse
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251

Misterjunky said:
You need to buy a jig, that will solve the problem.
The jig is less than $10 bucks shipped if you buy it on ebay.
Here is the link:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
Easy to use.. all U do is pull the battery, plug the jig into usb port on the fone replace battery and you will see the big triangle saying "Download" then unplug the jig and load odin.
Setup the pda/phone/pit/csc files in odin3. Then plug in the usb cable from computer to the phone making sure that where odin says "com" that it is highlighted yellow. Then click start in Odin and wait til it says "reboot" after that you will have a working phone with stock froyo 2.2 . Don't change any default setting in odin.
Use the "Ultimate Unbrick" rom - Here is the link:
http://forum.xda-developers.com/showthread.php?t=1116251
Click to expand...
Click to collapse
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D

Pat713 said:
Just tried Diablo's method, and it tells me command not recognized...
Click to expand...
Click to collapse
That means u do not have android toolkit installed on ur system. You should install it first for the adb commands to work.
I would recommend downloading and learning the basics of adb. This could be a life saver in many no-so-happy situations.

Pat713 said:
I got it unbricked now, problem was the drivers wouldn't correctly install on Win7.
But, now I have a new problem. Just put 3e recovery on and flashed CWM, only to get bricked again (no problems unbricking this time, taking longer to type this than it took to unbrick...). Also, sometimes apps refuse to download from the Market. I tap "INSTALL" and the notification pops up saying downloading, but then it disappears and nothing happens, its like I hit cancel. I'm going to call it for today and get some sleep. At least the phone is usable now! :-D
Click to expand...
Click to collapse
Had this same problem and it turned out to be a hardware problem. There was no gix for it. Also youll notice that gtgs recovery includes a preroot. If you need to send your phonr back like i did youll need to get that off. It was tricky for me because the hardware was so screwey. I got it off after a few reboots of the phone and a couple of trys with superoneclick.
Sent from my SAMSUNG-SGH-I997 using XDA App

Did I completely mess up my Captivate?

So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.

I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps

hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.

However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.

asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!

Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..

It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh

Connection issue in my sig

Any chance you have another pc to try it with? Or possibly another cable?

Going to try one click on ubuntu...

Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).

try one click unbrick in the android development page

hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?

I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U

Samsung Infuse Soft Brick and Distorted Clockwork Mod Recovery

I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.

Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse

andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.

ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected

The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2

rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it

The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!

drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug

So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.

I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

No download mode, no recovery, detected by odin, not kies

Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404

android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.

facing same problem in my samsung tab 2 p3100 after root

wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.

novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).

Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.

I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse

2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse

No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.

I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx

Need help with my samsung galaxy tab 3 lite!!!

So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!

EFS
iplayminecraftps4 said:
So one day I decided to flash custom ROM onto my Samsung galaxy Tab 3 Lite (SM-T110) and I used Odin and was new to the whole Rom flashing thing, and so It messed up during flashing and I was stupid and unplugged my tablet and now it is stuck in the download mode saying "Firmware upgrade encountered an issue, please use KIES and try again" something along those lines, and I tried looking it up and tried to fix it, like holding down power button and hard rebooting, didn't work, which now, every time I plug it into my pc to try a flash factory ROM and it keeps turning on and off on the error screen. So can someone help? I cant take it apart because I am using a screwdriver and it is damaging it, to try and take out battery and put it back in, and I'm not buying one of those plastic tools, I want to but, its just for another reason why I can't, So can anyone help? Thanks!
Click to expand...
Click to collapse
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device

i.daniyal said:
hi and don`t worry
1-flash EFS file with odin (in AP).
2-than you can wipe in recovery mode.GOOD LUCK
NOTE:efs file which is compitble with your device
Click to expand...
Click to collapse
where can I find an bfs? and what does it stand for?
EDIT: I think I found one, but ill have to wait till I get home from school to do it

So I downloaded it and it was in .tar format. do I need to convert it? because in ap it doenst show up, it shows file formats and .tar is not one of them.
EDIT: never mind used WinZip, and added it, but like I said, every time I plug my tablet into my pc, it turns on, shows the download mode error screen and turn off, then turns right back on, with same screen, and so on and so on. so I really cant do anything till that is fixed...any suggestions? Thanks!

ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/

i.daniyal said:
ok try this method:
http://www.99mediasector.com/fix-er...d-issue-please-select-recovery-mode-kies-try/
Click to expand...
Click to collapse
Ok just fixed the turning on and off thing, I had best idea, hold power button and plug in cord, then let go of power button and it should stay on now
EDIT: just plugged into my pc and its doing it again, it worked with charging cable, but I guess since I unplugged it, it stopped working, ill see when I get home from school and try again
Also turns out the screen only flashes on and off, when it is connected to my pc, when it is to the wall, its fine, so I need to figure that out

Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do

iplayminecraftps4 said:
Ok it works with my tablet plugged into the "charging only" port basicly, but it does both charge and can send data. But every time I try to flash i on Odin, It always fails, so idk what to do
Click to expand...
Click to collapse
1-enable USB debuging
2-what is the error?

I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM

iplayminecraftps4 said:
I cant enable it. Still in download mode error screen, and I try to flash it using Odin and it doesn't say pass it says failed, but I'll try to reinstall Odin and maybe download a fresh copy of the stock ROM
Click to expand...
Click to collapse
ok I fixed it, using this link https://www.full-repair-firmware.com/2017/11/full-firmware-t110.html

ok good

But it made it a different language upon setup but I can change to English, but it installs like 4 applications every time I reset it and boot it up, I can uninstall them, but its annoying, and the app called calendar or is supposed to be, is called s planer, I don't like it so I'm trying to find a stock ROM for it so it is back to normal.