Hi,
Since Prime 1.6 came out with the support for Xbox360 controllers that was added by Asus, I have been trying to connect my Wireless Gaming Receiver to my Transformer, so I can use my wireless controllers. However, everytime I connect the usb dongle to any of the dock's usb ports, the TF crashes and gets stuck in a reboot loop.
Has anyone else tried connecting his/her Wireless Gaming Receiver on his/her Transformer? If so, what is your experience? Does the same happen or does it work? Also, stock rom or custom rom?
Thanks for any info.
Sander
Related
Ok, so I have these two wireless usb mice (one I use for my desktop) which work great on any normal computer however, on the Transformer (when connected via the dock usb) the mouse stutters every few seconds. In normal usage cases this wouldn't bother me however when I use citrix to run apps on the server at my school the mouse lag is just a buzzkill. I am thinking of getting a cheap wired mouse at the local best buy but has anyone else had this problem with wireless usb mice? Also, is it ALL usb mice that lag or just wireless ones? I don't want to buy a usb mouse if it won't work right with my transformer. Thanks for reading all of this
I just got a cheap wired usb mouse and it works fine, no lag.
I used a spare wired usb mouse and it worked fine, no lag, no problems.
I just bought Logitech small keyboard + mouse combo - it's wireless with usb dongle and it works without a problem. I don't have dock though - I use the USB adaptor.
i have a cyborg R.A.T. 9 for my desktop i plugged in the my tf101 and it worked fine, no lag.
I'd like to figure out how to connect my Yamaha MIDI keyboard to my Asus tf101 tablet for recording via hardwired USB.
I've scoured the web looking for an app or solution to this and have come up generally blank, I've tried all the free midi controller apps, but they only seem to support Wifi or Bluetooth, which my keyboard is unable to do.
I'd like to eliminate my computer as a middleman (If I'm at my computer I'd just use that) and be able to use my tablet to record on the go!
Any ideas/thoughts/help/wisdom/proverbs/ninjas would be greatly appreciated
Device Info:
ASUS Transformer tf101 running
ICS 4.0.3 Rooted
I have the dock with 2 USB 2.0 ports that I am connecting to the connecter with.
Cable:
Amazon: USB MIDI Input Output Cable Converter PC Notebook
Works fine on computer and no issues so far via usb.
Thanks!
Bump
Can anyone help me?
I'm thinking about getting a Shield, but I've never bothered with wifi connectivity on my desktop PC. Can I still use the Shield as a USB gamepad? What about the streaming functionality?
Thanks for any answers!
Its not immediately clear *exactly* what you are asking here.
You can stream to the PC as long as you are on the same LAN, so if you connect the shield via wifi to your router and the PC has an ethernet connection to the router then that will work. Or you can use a USB-OTG adaptor in the shield with a USB ethernet adaptor to connect the shield to a router via ethernet too. If your desktop doesnt meet the requirements you can use splashtop instead of the official NVidia stuff.
The USB port on the shield though, well, its a regular android device. Its no different from plugging your phone into the PC. You can't use the shield as a USB gamepad like that. Best off just buying the wired version of the xbox controller if you want a PC gamepad, they aren't the cheapest (but they are far from the most expensive) but they are reasonably good quality and well supported
Just as a side note regarding Ethernet over OTG cable. Some apps (like the Play Store) won't connect unless you are using WiFi or mobile connection.
It's not the Shield's fault, just the app when it enumerates the network connectivity.
So far I only found the Play Store to ignore the network connection over Ethernet, same is true on all the devices I tested so far: TrimSlice (Tegra 2), TF201 (Tegra 3), My Touch 4G, Samsung Galaxy SIII and the Shield.
The Trimslice is the only one with a dedicated hardware Ethernet over PCIe, the others I used an OTG cable and hooked a USB HUB with Ethernet built in.
I don't stream PC games but when Nvidia was demoing the Shield's streaming capabilities they were using an Ethernet dongle so they didn't have to fight for WiFi connections from the attendees at the conferences they were presenting at.
To clarify, I was hoping I could simply plug in a Shield to my USB port and use it as a USB gamepad, but by the sounds of it that doesn't seem very likely.
Can't you just connect ps3 controllers to it over bluetooth? If you can't do that yet I'm sure you will be able to
gilrad said:
To clarify, I was hoping I could simply plug in a Shield to my USB port and use it as a USB gamepad, but by the sounds of it that doesn't seem very likely.
Click to expand...
Click to collapse
No, you cannot unfortunately. If that is what you require, buy a wired xbox controller.
When you set a device to USB tether, it adds another USB profile that creates a network connection over the USB - with some hacking it might be possible to use this connection. I think adb can also do some kind of port-forwarding to allow communication between the device and the computer.
It might be possible to get something working, both for controller input and streaming, but not sure how difficult this would be or what the performance would be.
But I don't think any of this will work very easily out of the box unfortunately!
~Troop
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM would read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Wayne_1da said:
I recently purchased the Lenovo S6000L tablet for the purpose of traveling. I wanted a large screen (10.1) tablet that could do the basic functions of a laptop, without having to lug around my 17.3 inch HP laptop to and from work/etc. My issue is, I work for a company that will not allow us to access their WiFi (security reasons), but we can use any LAN. I purchased an OTG cable and a USB to Ethernet converter. To my surprise, my Lenovo tablet wouldn't recognize the converter, thus, not allowing me to access the internet via the OTG cable. After that failure, I decided to root my tablet, which I did. Even with the root I can't seem to tweak the tablet to allow the internet connection bridge to work. Being P/O, I decided to go a step further by flashing a custom ROM to the tablet in hope that a different ROM read and react to the OTG setup, but I'm unable to find a ROM that would work. Well their you have it, this is my big issue. Even though those are the steps I've taken or are willing to take, doesn't mean It's the only thing I'm looking to do, I'm open to anything that will work. So I desperately ask, does anyone have or know of a solution for me to use a RJ45 ethernet cable on this S6000L Lenovo tablet?
P.S. I've hooked up the USB to Ethernet to my PC and it worked, so it's not faulty. I've hooked up a flash drive to my tablet via the OTG cable and that worked also, so the OTG cable works as well.
USB to ethernet adapter I'm using: Gigaware® USB Ethernet Adapter
Click to expand...
Click to collapse
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
I don't want to use it from another device.
pradeepxtremehacker said:
you cannot use like that because to use internet from other device to android you must use reverse tethering method and it can be done only from connecting it to a laptop or pc
so yyou cant use internet directly from lan cable to your tab
Click to expand...
Click to collapse
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Wayne_1da said:
I'm not using it from another device, I'm only using it and want to use it from a router and/or directly from a modem. I only hooked the adapter to my laptop once just to verify the adapter was working.
Click to expand...
Click to collapse
yes i understood your question
i said there is no way to use internet in tab from lan cable
The Nexus 7 tablet does it.
pradeepxtremehacker said:
yes i understood your question
i said there is no way to use internet in tab from lan cable
Click to expand...
Click to collapse
Corrections for the above reply: I misread your reply. In theory, reverse tethering is the same method. A source that contains internet(PC) that you bridge to your tablet and gives it internet. The Nexus 7 is one tablet that allows you to bridge a RJ45 to the tablet for LAN access, and their are others. My best guess is it's an software issue that Lenovo has blocked, but I'm looking for a way around it. I don't know if they added anything specific to the stock that is killing that use or is it just that the adapter I purchased isn't compatible with what I believe is Linux based software. As I said, I will travel any path to victory, even if I have to flash software that's used on the Nexus 7, if possible.
Sorry for the delay, I'm at work and people keep coming to me.
Houston, I believe I have a solution to my problem!!
I have no clue why I didn't think about it earlier but all it may take to remedy my issue can be spelled with one word, Portable Wireless Router. Ok, that's 3 words, but who cares! I don't. Whenever I'm in a situation where LAN is available but WLAN isn't, I figure all I would have to do is to plug the LAN into my soon to be purchased TP-LINK TL-WR702N 150Mbps Wireless N Nano Router. And BOOM! my own private WiFi hotspot.
Hi all. Recently I've sold my laptop, as I wasn't using it that much, so I've decided to try the desktop mode (when needed) & also a wireless keyboard with touchpad.
It works fine with the TV, but I can't connect both, HDMI + USB receiver for the keyboard.
I tried 2 docking stations, a thinkpad and a dell, and on both works fine to connect to TV, but it doesn't on the phone. Any idea?
The keyboard is Rii k18.