i downloaded the LGMobile Support Tool to update my phone, and i went through the connecting process, the driver scanned my phonoe, but then after it says:
"The Cell phone is the latest version already. So you don't need to update."
what do i do? i really want GB on my phone :[
aston60 said:
i downloaded the LGMobile Support Tool to update my phone, and i went through the connecting process, the driver scanned my phonoe, but then after it says:
"The Cell phone is the latest version already. So you don't need to update."
what do i do? i really want GB on my phone :[
Click to expand...
Click to collapse
Is your phone a recent replacement? If it shows up in the LG updater as a P999DWP rather than the original build, P999DW, it won't update. Just curious, if it is a DWP, what does your SN start with (under your battery)? Mine is 106KPQJ
mine was a replacement so do you think we will have to wait until ota update for ours to work?
Related
My model info:
Model number: LG-P920
Android version: 2.2.2
Baseband version: L6260_MODEM_SIC_01.1042.00
Kernel version: 2.6.35.7
Build number: FRG83G
Software version: LGP920-V10b-JUN-16-2011
when I try to update it, it says, that current version is the latest, but I'v seen that there is V10d out already (July 8th update?)
Hi
The base band and Kernel are the same, the software has been updated to V10D JULY 8TH
cheltenham2004 said:
Hi
The base band and Kernel are the same, the software has been updated to V10D JULY 8TH
Click to expand...
Click to collapse
It says I dont need the update?
The LG PC update utility says v10b is the latest for unbranded Optimus 3D's too (in Customer Support -> Supporting Model menu)
I have an unbranded phone,my SW version is v10d
I asked LG about that damn update since there is so much confusion about it.
Here is their response:
Mobile Phone Support: Updates are put out for networks as well as the phones so it may be that the update that has been released is not for your network
Click to expand...
Click to collapse
So no panic guys.
are these updates not OTA??
we shouldn't need to connect to a PC to update the phone these days!
mmace said:
are these updates not OTA??
we shouldn't need to connect to a PC to update the phone these days!
Click to expand...
Click to collapse
It is OTA, I recieved it to my unbranded phone with no sim card in it, over wi-fi.
I'm stuck on 45% is this normal?
edit phone got bricked but i saved it LG tech = useless
if your update fails or goes into clockwork recovery etc you will need LG mobile update on your pc and install the lg p920 drivers
turn your phone off take the battery out leave it for 10 secounds, connect battery and usb cable hold power and volume up hold it for 10 secounds let go then do it again for 10 secounds
now run LG mobile update click customer support > recover type your imei let it update once finished power up phone now you will get a screen on the phone that says updating let it update
Argh. My phone now just keeps booting into ClockworkMod Recovery.
Anyone know how I can fix this?
Thanks ik911.
I was just in the process of doing the emergency recovery myself.
Bloomin annoying that even doing a restore from CWM didn't work
Ok. may have more problems here.... how long should it sit on "Updating Firmware"?
I'm so happy, just updated to 10d and its fixed the terrible picture quality I was having when using the camera. I had literally felt like I was using a camera phone from many years ago until this update, it was that bad on 10b.
NOTE: Video quality VASTLY improved, Photo quality still complete garbage. Its weird now as video quality is superior to photo, quite clearly a bug IMO.
Thanks ik911.
I was just in the process of doing the emergency recovery myself.
Bloomin annoying that even doing a restore from CWM didn't work
Ok. may have more problems here.... how long should it sit on "Updating Firmware"?
Click to expand...
Click to collapse
update stuck on the pc or phone ?
Sent from my LG-P920 using Tapatalk
On the phone.
do the emergency restore again on the computer
Sent from my LG-P920 using Tapatalk
I'm getting a "connection failed due to authentication error" when I try to check for OTA updates.
And the PC utility is still showing v10b as the latest for unbranded Optimus 3D's in the UK. Any ideas about how I might be able to get v10d?
I have unbranded and can't get automaticaly update via phone also when I try to update via PC, PC having communication problems between PC & Phone :/ any1 know how to fix it? I have latest drivers and I also can't see microsd card when I turn that USB on when I plug in phone via usb.
turn mass storage off
Sent from my LG-P920 using Tapatalk
If someone can make a backup for us that can't update so we can do a restore using clockwork that would be very appreciated.
Sent from my LG-P920 using XDA App
ik911 said:
turn mass storage off
Sent from my LG-P920 using Tapatalk
Click to expand...
Click to collapse
you mean that message what pops up when plug in via usb? I did tried with and without it turned it on, still can't detect it and can't update phone via PC too :/
trying to use lg tool to update phone to get new baseband because I get no gps lock whatsoever in nav. Question is which version do I have? lg p999??? It gets to the point of trying communicate with phone and won't do anything... wondering if I installed right driver???
jnralp00 said:
trying to use lg tool to update phone to get new baseband because I get no gps lock whatsoever in nav. Question is which version do I have? lg p999??? It gets to the point of trying communicate with phone and won't do anything... wondering if I installed right driver???
Click to expand...
Click to collapse
Your version shouldn't matter... Refurb, or not. The LG Updater should work now.
I ask because when using the updater you have to install lg driver and it ask which device and there are 3 or 4 different ones. Not sure if its the same driver or what?
The drivers for LGP999DW, LGP999DWDU and LGP999DWP are the same. They are the same phone. Two are must designations for LG refurb units. It should not matter which one you use. Also, the updater will tell you which one you have when you connect the phone and the udpater is running. You can then select the exact match to your device if you so desire.
I am trying to update my LGP-920 to the latest software that apparently came out for the P920 this week (30A).
The update tool first tells me there is an update available, but when I press ‘update software’, it analyses the phone and then it says ‘software update not supported for this model’ or 'You are already up to date' or 'some error with 'msxml.msi' or some toher of the plethora of the responses it comes up with!
It is on 20G at the moment. I also tried the KDZ file update for Euro-Open (I am in the UK, but the phone was not bought through a service provider). I have updated a number of times in the past, all in the same environment (Win7 64bit) – Am I missing something?
Instead of updating the phone use the "recover phone" option. it is in one of the menu headings in the softwareupdate tool. Open the LG softwareupdate tool, remove sd card and sim card, connect usb with phone switched off. and then select the recover phone option in the menu.
Hope this is helpful!
kriptikchicken said:
I am trying to update my LGP-920 to the latest software that apparently came out for the P920 this week (30A).
The update tool first tells me there is an update available, but when I press ‘update software’, it analyses the phone and then it says ‘software update not supported for this model’ or 'You are already up to date' or 'some error with 'msxml.msi' or some toher of the plethora of the responses it comes up with!
It is on 20G at the moment. I also tried the KDZ file update for Euro-Open (I am in the UK, but the phone was not bought through a service provider). I have updated a number of times in the past, all in the same environment (Win7 64bit) – Am I missing something?
Click to expand...
Click to collapse
Try to delete all LG related drivers, restart computer and reinstall them.
If that doesn't work, try in a different computer.
Thanks for your input guys, i will give an update later on as i see there are a couple of other threads where folk are having trouble upgrading. Suprise, suprise, LG support were absolutely no use! (either that or it was the night time cleaner that replied!)
LG Customer Support said:
I can advise you that deatiled information on the ICS update for the P920 will be released in due course, beyond this we at technical support have no further information.
Click to expand...
Click to collapse
/edit - After searching around, it looks like allthough I am in Europe (UK), there will possibly be a specific GBR version coming out, hopefully soon.
Hello!
I just bought my new tablet and I wanted to make sure I have latest version for my device, but I got a message saying that my device has been modified, ok so then I installed kies and it told me I had the latest version avaliable, then I went into download mode and I saw system status:Custom, I tried to wipe both partitions but still the same problem.... I bought this tablet today feels very strange that my system is custom. On my note 3 it is says official
Are you using a MicroSD? If yes, take it out, then reboot and check again. It's a known bug.
Same on mine. No micro sd rebooted many times
Sent from my SM-P905 using Tapatalk
If you rooted you've tripped the knox security sistem and samsung won't update a rooted device. At least that's what Ithink happened on my device...
alexan92 said:
Hello!
I just bought my new tablet and I wanted to make sure I have latest version for my device, but I got a message saying that my device has been modified, ok so then I installed kies and it told me I had the latest version avaliable, then I went into download mode and I saw system status:Custom, I tried to wipe both partitions but still the same problem.... I bought this tablet today feels very strange that my system is custom. On my note 3 it is says official
Click to expand...
Click to collapse
ShadowLea said:
Are you using a MicroSD? If yes, take it out, then reboot and check again. It's a known bug.
Click to expand...
Click to collapse
Hello
I have the same problem. Is custom but Knox is 0x0. I try everything, including Odin, but NO result. In Odin don't start the process, in Kies it shows that is the last firmware, and OTA "the device is modified".
This is a common issue with the SM P905 variant, I had the same problem myself. The only way to sort it out is to send it to Samsung for repairs or take it in to a service centre. I'm pretty sure all they'll be doing is reflashing the firmware but you might not want to void the warranty by doing it yourself.
FreshlyBrewed said:
This is a common issue with the SM P905 variant, I had the same problem myself. The only way to sort it out is to send it to Samsung for repairs or take it in to a service centre. I'm pretty sure all they'll be doing is reflashing the firmware but you might not want to void the warranty by doing it yourself.
Click to expand...
Click to collapse
sorinin said:
Hello
I have the same problem. Is custom but Knox is 0x0. I try everything, including Odin, but NO result. In Odin don't start the process, in Kies it shows that is the last firmware, and OTA "the device is modified".
Click to expand...
Click to collapse
Hello
I solve the problem by using another laptop with WinXP. But please make an IMEI backup. I don't make it, and now my IMEI is /01 and I don't have Phone acces. ..
Now is possible to use my computer (Odin). I make update at last BIOS for my laptop. But still I can not find my IMEI, and in this way can't use the phone...
sorinin said:
Now is possible to use my computer (Odin). I make update at last BIOS for my laptop. But still I can not find my IMEI, and in this way can't use the phone...
Click to expand...
Click to collapse
Wait simply for the update via KIES or OTA. It will be available soon or is still available for a lot of countries.
Status will pass from modified to Official.
check this thread : http://forum.xda-developers.com/showthread.php?t=2710004
Hi,
You first have to check if this particular update (not the stability update BUT this "modified status bug" update is available for your country.
Check it here http://live.samsung-updates.com/inde...device=SM-P905
Have a good Sunday.
Fabien
cracou111 said:
Wait simply for the update via KIES or OTA. It will be available soon or is still available for a lot of countries.
Status will pass from modified to Official.
check this thread : http://forum.xda-developers.com/showthread.php?t=2710004
Hi,
You first have to check if this particular update (not the stability update BUT this "modified status bug" update is available for your country.
Check it here http://live.samsung-updates.com/inde...device=SM-P905
Have a good Sunday.
Fabien
Click to expand...
Click to collapse
No Problem with mine SM-P905
Got a new update today. Looks like it is only security patches
New software version is H90021w
Build is MRA58K
Security patch level is 2016-09-01
Security Software Versino MDF V2.0 Release 2
Still android 6.0
silentmage said:
Got a new update today. Looks like it is only security patches
New software version is H90021w
Build is MRA58K
Security patch level is 2016-09-01
Security Software Versino MDF V2.0 Release 2
Still android 6.0
Click to expand...
Click to collapse
This is the update that patches the quadroot vulnerabilities.
Can't get this update
Guys i can't get this update how can i update my lg v10 on this version current version is h90020j
download link
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW966RO7520CAX5D10ACLO6/WEB_H90021w_00_0921.kdz
Info please
Thanks man I only want to know how to install this on my phone any tutorial for that if possible because I am new to this thing and i want to know after installing that will my phone get rooted or it will not
Thanks in advance
download the above kdz.. download & install "LG UP"..connect your phone thru USB (im assuming u have LG usb drivers installed & ur pc detects it perfectly)
open LG UP.. select the kdz file
Select "UPGRADE" & execute... 10-15 min for installation & another 15-20 for booting up.
fahadkhan1993 said:
Thanks man I only want to know how to install this on my phone any tutorial for that if possible because I am new to this thing and i want to know after installing that will my phone get rooted or it will not
Thanks in advance
Click to expand...
Click to collapse
Thanks for the help it worked
zahidb said:
download the above kdz.. download & install "LG UP"..connect your phone thru USB (im assuming u have LG usb drivers installed & ur pc detects it perfectly)
open LG UP.. select the kdz file
Select "UPGRADE" & execute... 10-15 min for installation & another 15-20 for booting up.
Click to expand...
Click to collapse
Thanks for your help man this helped me and my phone updated.:good::good::good::good::good::good:
I want to ask one more thing what will happen if I select the refurbish option in LG UP tool??
Try it... Maybe it deletes user data
Sent from my LG-F300L using XDA-Developers mobile app
Guys, I purchased an unlocked AT&T LG V10. It's currently running h90020j. I haven't received any ota updates yet.
My concern is that if I flash the new software version, will my phone get locked again? I use Etisalat SIM card in it.
i want to update my Unlocked AT&T LG V10 to the latest update H90021W. i tried using lg bridge but it prompts me to update from the update center from the phone itself. when i try to update from the phone, it shows "Device is up to date".
my question is that if i update via flashing the firmware file, will my device be relocked by AT&T? i live outside USA and Etisalat as my carrier. i have already downloaded the .kdz file for v21w software. i worried whether the device will get relocked by AT&T. help me out guys.
also i am getting a pretty poor battery out of my V10. wondering whether the new update would give me a better battery life.
zahidb said:
Try it... Maybe it deletes user data
Sent from my LG-F300L using XDA-Developers mobile app
Click to expand...
Click to collapse
i want to update my Unlocked AT&T LG V10 to the latest update H90021W. i tried using lg bridge but it prompts me to update from the update center from the phone itself. when i try to update from the phone, it shows "Device is up to date".
my question is that if i update via flashing the firmware file, will my device be relocked by AT&T? i live outside USA and Etisalat as my carrier. i have already downloaded the .kdz file for v21w software. i worried whether the device will get relocked by AT&T. help me out guys.
also i am getting a pretty poor battery out of my V10. wondering whether the new update would give me a better battery life.
Mine didnt get unlocked....try it
Sent from my LG-F300L using XDA-Developers mobile app
Sim card error
After updating my V10 to 21w my phone is not detecting any sim card can any one help ?
Thanks
fahadkhan1993 said:
Guys i can't get this update how can i update my lg v10 on this version current version is h90020j
Click to expand...
Click to collapse
dont update otherwise u will face many errors ... im facing alot from last 1 months still searching salutation
---------- Post added at 01:41 AM ---------- Previous post was at 01:39 AM ----------
zohaib anwar said:
i want to update my Unlocked AT&T LG V10 to the latest update H90021W. i tried using lg bridge but it prompts me to update from the update center from the phone itself. when i try to update from the phone, it shows "Device is up to date".
my question is that if i update via flashing the firmware file, will my device be relocked by AT&T? i live outside USA and Etisalat as my carrier. i have already downloaded the .kdz file for v21w software. i worried whether the device will get relocked by AT&T. help me out guys.
also i am getting a pretty poor battery out of my V10. wondering whether the new update would give me a better battery life.
Click to expand...
Click to collapse
nothing will be happend but u will loss fingerID. IM ALSO using AT&T IN DUBAI and i update it to MM and now im facing lots of error
zohaib anwar said:
i want to update my Unlocked AT&T LG V10 to the latest update H90021W. i tried using lg bridge but it prompts me to update from the update center from the phone itself. when i try to update from the phone, it shows "Device is up to date".
my question is that if i update via flashing the firmware file, will my device be relocked by AT&T? i live outside USA and Etisalat as my carrier. i have already downloaded the .kdz file for v21w software. i worried whether the device will get relocked by AT&T. help me out guys.
also i am getting a pretty poor battery out of my V10. wondering whether the new update would give me a better battery life.
Click to expand...
Click to collapse
I have updated to H90021W months ago it went smooth and error free. all my data was kept in tact and I have face 0 issues since then. I hope they find a way to get the kdz file for the future updates. Also no it shouldn't relock the device mine was unlocked when it updated and stayed unlocked.