I have a problem , I've done everything as instructed but I forgot about google aps. I did not know how to install so I did wipe in stock recorvery. After that I made again wipe in the clockmod work. This time I installed both files (ggaps and CyanogenMod) but after reboot I see only red logo od motorola, what now?sry for my bad english
Related
My nexus has been running Cyanogen mod 10 for a while and I wanted to change to kaos droid.
I went into cwm and cleared data/factory reset, then flashed the rom, then I cleared dalvik cache, nothing seemed to go wrong but when I chose reboot device it got stuck on the boot screen, so I took the battery out and back in, then tried to boot into recovery but the google logo came up, then the clockwork mod recovery logo but there was no text and I couldn't do anything with it, now its just cycling through the logos and I cant get into revovery mode or anything!
Please help!
Hello,
I successfully installed cyanogenmod 7.2 on my Motorola Defy MB525 using the instructions from the cyanogenmod wiki "Install CM for jordan" (can't post link yet).
After a while, I wanted to install gapps, so I installed it from Bootmenu. After this, the phone was always booting to boot menu and I didn't know how to make it boot into the system, so I changed the "Boot" option default to something like "Normal", I think.
Now when starting the phone, all I see is the Google logo which stays there indefinitely.
I can still boot to BootMenu and tried a number of times to wipe data/factory reset, wipe cache, wipe dalvik cache, and re-install the cyanogenmod7.2 zip, but it still can't get out of the infinite loop.
I found out that a posible solution would be to flash an image with RSD Lite, but it seems kind of tricky and I would rather leave it as a last resort.
Any ideas?
Thanks
I managed to unbrick my phone eventually.
Tried to use RSD Lite with several images, but it would give an error and then the application would crash and leave my bootloader corrupt. I tried all the schemes I could find including: loading the image from root of C:, disabling UAC, etc., but nothing worked.
Then I tried sbf_flash on Linux with the same image, and it worked like a charm, no errors, and my phone was up and running again.
So for anyone else who may encounter this problem, I warmly recommend using sbf_flash, it is incredibly simple to use.
sltrv said:
Hello,
I successfully installed cyanogenmod 7.2 on my Motorola Defy MB525 using the instructions from the cyanogenmod wiki "Install CM for jordan" (can't post link yet).
After a while, I wanted to install gapps, so I installed it from Bootmenu. After this, the phone was always booting to boot menu and I didn't know how to make it boot into the system, so I changed the "Boot" option default to something like "Normal", I think.
Now when starting the phone, all I see is the Google logo which stays there indefinitely.
I can still boot to BootMenu and tried a number of times to wipe data/factory reset, wipe cache, wipe dalvik cache, and re-install the cyanogenmod7.2 zip, but it still can't get out of the infinite loop.
I found out that a posible solution would be to flash an image with RSD Lite, but it seems kind of tricky and I would rather leave it as a last resort.
Any ideas?
Thanks
Click to expand...
Click to collapse
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Did you wipe system as well?
rashmin94 said:
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Click to expand...
Click to collapse
Carbon Rom has just lead to trouble as far as i can see. You will need to flash the firmware follow this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and remember to input the fastboot commands MANUALLY
Hi, so short story is.
1. I had a backup of my stock rom that i did using twrp.
2. I flashed Franco Kernel for COS 13 downloaded from his website (https://kernels.franco-lnx.net/OnePlusOne/6.0.1/anyKernel/)
3. When i flashed i performed a Wipe dalvik cache from recovery
4. Reboted phone, and started optimizing apps but suddenly it rebooted.
5. Started optimizing apps but when it showed optimizing app 1 of 103 the phone keept restarting.
6. I decided to restore my backup made from TWRP, but then phone got stuck and restated everytime from the CYANOGENOS logo.
7. Since it was not booting, i decided to install from fastboot a clean CM13.
8. Flashed, finished and then the phone restarted, but heeey, again stuck in the CYANOGENOS Logo and restarting when the logo shows up.
9. I freak out and I don't know what to do.
So far:
fastboot is working
Cyanogen Recovery is Working ( tried the wipe from that, but still no luck)
When I plug the device directly to my PC, it shows "QHSUSB_BULK", but as i say: fastboot and COS recovery are working.
Can you guys help me, please
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
leokook said:
First of all, I let the phone charge till 100% on screen (yes, the charger indicator was working aswell)
Well, since my device was able to boot into both Recovery and Fastboot modes, I decided to flash a custom recovery one more time to replace the COS recovery. I flashed CWM 6 (because before TWRP was not helping) and performed a "backup" of the whole rom, just to see if it worked, and it did. After that, i wiped /factory reset from CWM.
Rebooted the device, and voilá I guess. The phone was able to boot into CM 13, now I'm happy to see that I was able to recover from this issue.
Still have no clue about why the FrancoKernel ended in a bootloop. Was the cache wiping a bad idea ?
Click to expand...
Click to collapse
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Mr.Ak said:
Yes,that's where it all went wrong.You should never wipe anything while flashing a custom kernel.
Click to expand...
Click to collapse
Lesson learned.
I have an old Samsung 5670 and decided to flash cyanogen 11. I successfully installed clockwork 6.0.4.5-beni and then i flashed cm-11-20140116-NIGHTLY-beni, wipe data, wiped cache and dalvik and everything worked just fine. And then, dissaster came: i tried to install gapps and since then (i got a message that flashing was successful) and since then, everytime i turn on my phone i can only enter into the os but the only thing i see is battery status and time on the upper right corner and the rest of the screen is black. I can swipe from the top (i can see the date and time and a "emergency calls only" message).
I tried wipe data/factory reset from recovery, wiped cache and dalvik, i even re-flashed cm 11 and i am still having the same issue. I tried to flash a different rom (miui 2.4.20) but im getting an "installation aborted" message. Even tried to flash the stock rom with odin but though i have installed the usb drivers odin can not "see" my device.
And yes, i was stupid enough not to take a nandroid backup
So now what? Is there a way to fix this?