After updating to 3.2 the card reader doesn't read my SD as well anymore.. even tried mounting it manually from the settings menu and still nothing. Any help would be greatly appreciated.
(wifi us zoom Katana 2.0 OC)
What do you mean by "as well"?
Are you looking in /mnt/external1?
Go to settings > storage. If you see the SD card at the bottom you can find it in mnt/external1. If its not there try a different SD card to verify if its the card or the Xoom causing the issue.
Sent from my Xoom
burden010 said:
What do you mean by "as well"?
Are you looking in /mnt/external1?
Click to expand...
Click to collapse
That its not working as good as it did on tiamat rom 1.1
It takes my xoom a while for it to figure out that I have the SD card in the reader, ill leave it over night and the next morning it'll be mounted normally.
Yes I'm looking in that same directory but just comes up empty. It mounts just fine in recovery
Related
I've seen this error elsewhere, but no solution. I'm running PRIME 1.4, want to upgrade to 1.6.
- I used the nvflash method. I re-did this, obviously that didn't work.
- I tried formatting the SD card via Windows and via CWM (which didn't work, because it couldn't mount it...duh). Used the default FAT32 settings to format. For others, this seemed to be the fix.
- I CAN read the SD card on the tablet once booted up regularly. I can also mount the storage on my PC.
Any ideas? Thanks in advance.
So I tried a different sdcard (8GB, if it matters). No issues. No idea why this worked, so I guess the mystery is unsolved.
chicagoepicuser said:
So I tried a different sdcard (8GB, if it matters). No issues. No idea why this worked, so I guess the mystery is unsolved.
Click to expand...
Click to collapse
Probably partition of your sdcard. Try reformatting it to another format like NTFS or something?
chicagoepicuser said:
I've seen this error elsewhere, but no solution. I'm running PRIME 1.4, want to upgrade to 1.6.
- I used the nvflash method. I re-did this, obviously that didn't work.
- I tried formatting the SD card via Windows and via CWM (which didn't work, because it couldn't mount it...duh). Used the default FAT32 settings to format. For others, this seemed to be the fix.
- I CAN read the SD card on the tablet once booted up regularly. I can also mount the storage on my PC.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
In fact, CWM can't real actual SDcard (dock slot), it read the MicroSD only (the tablet slot)
Try putting the zip at the root of the MicroSD, and launch CWM
For me it´s doing the same - can´t mount SD card. I have microSD card that I have formated into FAT/FAT32/NTFS - nothing worked. I try to put it into SD card adapter and nothing too...
Can someone tell us please, where is the problem??? I have root, flashed cwm 3.0.2.8, standart ROM...
monkasko said:
For me it´s doing the same - can´t mount SD card. I have microSD card that I have formated into FAT/FAT32/NTFS - nothing worked. I try to put it into SD card adapter and nothing too...
Can someone tell us please, where is the problem??? I have root, flashed cwm 3.0.2.8, standart ROM...
Click to expand...
Click to collapse
MicroSD needs to be formated into FAT32 and only this format
If you read the post above yours, you would have also seen that the SDcard slot on the dock DOES NOT WORK in CWM
bud77 said:
In fact, CWM can't real actual SDcard (dock slot), it read the MicroSD only (the tablet slot)
Try putting the zip at the root of the MicroSD, and launch CWM
Click to expand...
Click to collapse
Yes, did this. I wasn't messing around with the dock, just the microSD in the tablet itself. And yes, the .zip was in the root directory--though it's not like I was able to get this far. I was not even able to see the root directory, at all.
chicagoepicuser said:
Yes, did this. I wasn't messing around with the dock, just the microSD in the tablet itself. And yes, the .zip was in the root directory--though it's not like I was able to get this far. I was not even able to see the root directory, at all.
Click to expand...
Click to collapse
Plug it in while android is running, and check if the MicroSD is seen in /removable/MicroSD
If, yes, that's pretty weird. If not, try another MicroSD
I had the mounting issue as well. But I formatted my micro SD card with SD Formatter (I am not allowed to post URL as a new user ), then it can be mounted.
myode is right, use SD Formatter 3.0 will fix your problem.
It use low-level format, where windows format don't.
I came across (i can't remember where exactly) some people swear that by formatting the microsd card in a android phone, the card no longer exhibit abnormal behaviour in the tf101.
I need some help, looked around the forums and cannot find a fix.
I recently updated to 2.3.3 and can't for the life of me get the External SD card to be read while in USB storage mode.
I've also noticed that I have to press the "Turn on USB storage" button twice to just get the Internal SD Card to mount. The first time it shows loading but then does nothing (could be primary issue).
I can see the Internal SD card but not the external. It also seems that when I turn on USB storage and then off, I have to physically re-mount the External SD card to get it to even read it. Anyone have any suggestions?
This is exactly what I had when I upgraded to GB 2.3.3.
I took out sd from my G2X and reformatted on my Mac, then put it back. That solved my problem in my case.
rutabega said:
This is exactly what I had when I upgraded to GB 2.3.3.
I took out sd from my G2X and reformatted on my Mac, then put it back. That solved my problem in my case.
Click to expand...
Click to collapse
Awesome, I'll give it a shot
Edit: That did it! Thanks a ton!
Hey guys, I need help.
After countless hours of stressing over my SD Card, I still can't get it to mount. I even went downtown to get a new one. I have a Motorola XOOM.
Problem is, I can't even get adb to work cause I can't access usb debug, because I wiped data hoping to re-install the rom. Now I'm still in CWM with nothing to do.
What could it be that's causing my SD Card's to not mount? There was one SD Card that mounted but that's not here right now. Would it be the SD Cards? I reformatted them to FAT32 as well.
Go here see if you can find some solution, search.... the search is a powerful tool, thank you sir.
http://forum.xda-developers.com/forumdisplay.php?f=945
qwahchees said:
Hey guys, I need help.
After countless hours of stressing over my SD Card, I still can't get it to mount. I even went downtown to get a new one. I have a Motorola XOOM.
Problem is, I can't even get adb to work cause I can't access usb debug, because I wiped data hoping to re-install the rom. Now I'm still in CWM with nothing to do.
What could it be that's causing my SD Card's to not mount? There was one SD Card that mounted but that's not here right now. Would it be the SD Cards? I reformatted them to FAT32 as well.
Click to expand...
Click to collapse
It happens some time
I have two sd cards
One of them shows in recovery mode other is not mounting though both works great in device for other stuff..
I think its due to lack of some files on them after i use the second card for one week in my device for now they both mounts in recovery.
So what you have to do is use your card in some other android phone for some time..
Installed one or two app on it etc.
Then try again
we all should be polite enough to press thanks for anyone who helped US.
I was going to post this in the AOKP rom page but i figured it'd get seen more here and maybe its not even a problem related to the rom. I recently installed the AOKP rom located here http://forum.xda-developers.com/showthread.php?t=1831858. everything was great the first day then i started getting random reboots and losing my data. So I flashed a back up and still got the same problems. I lost my data yesterday, fixed that by manually changing the APN settings and everything was fine other than still getting random reboots. today I went to take a picture and it says "no external storage". I opened root explorer and I can access my EXTERNAL SD card but not the INTERNAL. I tried to mount in via the setting, storage menu and it wont mount. Also tried mounting in CWM recovery, no dice.
Is this a hardware problem or something software related? Anyway to get my stuff back or is it gone? I thought about trying to format it through recovery but how can I do that if it wont mount? Any help would be greatly appreciated.
I'm about to go through and install a "clean" copy of this ROM hopefully. Or I might try another ROM I know works like it should.
Installed a new Rom. Everything works perfect so far but still can't access my internal sd card. Any tricks how to get this back or do I need to just turn it in for warranty?
Sent from my SGH-I727 using xda app-developers app
Warranty may be your best solution, you'll have to revert to stock using kies/odin which may on it's own fix your issue.
Are you also receiving the "Blank USB storage or has unsupported file system" error?
I have been battling this issue for a friend of mine (I own only the I9300) and I believe I have somewhat of a fix. It will allow you to use an external SD card.
If you can use / access the external SD card on your phone then disregard this message.
If you can't access any of the storage, including the external SD card try following this short tutorial I made:
http://forum.xda-developers.com/showpost.php?p=31464589&postcount=22
devz3r0 said:
Are you also receiving the "Blank USB storage or has unsupported file system" error?
I have been battling this issue for a friend of mine (I own only the I9300) and I believe I have somewhat of a fix. It will allow you to use an external SD card.
If you can use / access the external SD card on your phone then disregard this message.
If you can't access any of the storage, including the external SD card try following this short tutorial I made:
http://forum.xda-developers.com/showpost.php?p=31464589&postcount=22
Click to expand...
Click to collapse
Im still able to use my external sd card. I can read and write to it from both phone and pc.
Sent from my SGH-I727 using xda app-developers app
The internal SD card is essentially part of the motherboard. If it's corrupted, you have no choice but to warranty the phone out. Kishke's right in that restoring to stock might be your last, best chance.
It seems that my SD card is not writable when inserted. Is this true? I tried to create a new folder on it with root explorer (I am not rooted though) and it said that my device needs to be rooted in order to accomplish that task.
Any ideas?
Jonn
Did you try something like es file explorer? I would try that.
That didn't work either. It says "operation failed".
I actually noticed that it wasn't working playing act raiser and it wasn't saving my position. Moving the ROM to internal storage worked. I then tried to create a folder.
Sent from my Nexus 7 using Tapatalk 2
Huh. Just tried a different SD card and that one worked. Weird.
Sent from my Nexus 7 using Tapatalk 2
I spoke too soon. After removing the sdcard that worked and putting it back in, it no longer is writeable.
Sent from my Nexus 7 using Tapatalk 2
It works again if I pull the card out, restart the shield and put the card back in. Perhaps something up with the mounting process?
It appears that once a card is mounted, if it is removed and re-inserted, it remounts as read only.
Jonn
Sent from my Nexus 7 using Tapatalk 2
It looks like sdcard mounting is messed up. I can't get any of the sdcards i have tried to mount.
Did you go into settings and actually click unmount before removing the SD Card? Many linux systems (android is linux) will mount devices which werent safely removed in read only mode for some bizarre reason.
I tried that as well. It still doesn't work.
Sent from my Nexus 7 using Tapatalk 2
jonnberg said:
It seems that my SD card is not writable when inserted. Is this true? I tried to create a new folder on it with root explorer (I am not rooted though) and it said that my device needs to be rooted in order to accomplish that task.
Any ideas?
Jonn
Click to expand...
Click to collapse
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
evobunny said:
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
Click to expand...
Click to collapse
I did not read the destructions. The destructions have useful information? Where may i find these destructions? I assumed fat32 so that is what my sd is formatted to.
chevyowner said:
I did not read the destructions. The destructions have useful information? Where may i find these destructions? I assumed fat32 so that is what my sd is formatted to.
Click to expand...
Click to collapse
sorry i cant post link yet cause im new to forum. but go there, (shield.nvidia.com/user-guide/sd-card) user guide said to format it to NTFS
Would has added this sooner, but I lost my sdcard reader.
Formatting it NTFS worked.
Still wont mount, but now i at least get the option to mount.
evobunny said:
when you go to storage under settings, under sd card does it show total space for card. if not maybe you have to format it to NTFS first. thats what I had to do with my new card. also said to do so on shield guide
Click to expand...
Click to collapse
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
jonnberg said:
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
Click to expand...
Click to collapse
sorry I dont know what else to tell you, i first had the same problem like yall when I stuck in a brand new card. nothing I downloaded would go on to card. and it didnt show the amount of space left under the storage menu. Then i found out it need to be formated to NTFS. Once i did that everything started downloaded and showing up on card.
jonnberg said:
Yes, I formatted it to NTFS before I inserted it. It shows the total space and space available, it just doesn't allow anything to be written to it. I can take it out and put it in a PC and it works correctly. I also have another SD card that I tried and it worked for a few minutes, but I haven't been able to get it to keep working.
Jonn
Click to expand...
Click to collapse
The only memory card I have gotten working (about 1 minute ago) is 512MB and formatted fat32
The card i want to us is a 16gb microsdhc formatted fat32 when this memory card is in my shield it knows it has a memory card but says it has no partitions on it.
I am running testdisk on the sd card and it found 9 partitoins. I will try and clean that up.
To be honest, I've never tried SD card support on the device. So I can't say one way or another. But I'll be looking at it soon enough since I got my first build of CWM for SHIELD waiting for me to debug in the other room once the kids go to bed.
I just tried two different 8GB class 10 transcend cards, an 8GB class 2 generic card and a 256mb sandisk card. I put each card in and copied a file from internal storage to it. Then I removed each of the cards without unmounting and put them back in and proceeded to copy a file to the card again. Every time it worked successfully. I do not even know what format they are in and didn't format them before testing. And, maybe the issue didn't show up because I didn't give it enough time. I am not sure.
Also, I know this is probably a really dumb question but the micro sd slot is spring loaded. You are pushing it in until you hear a good solid click right?
issues
Having issues of my own.
Bought a 64gb sandisk SDXC card for shield. It worked 100% fine in my SGS3 formated for exFat. But not in the shield...
It seems to work somewhat when formated for NTFS. But the file path is really messed up and 1/2 my apps cant see the SD card because of this. It something like (root/storage/sdcard1/....)
2 apps that are basically usless right now due to this are Power amp & FPse.
Android doesn't normally support either exFat or NTFS. The shield may include support for them but if I had a shield I would steer clear anyway and go with what android definitely trusts in FAT32.
Hopefully NVidia will do a firmware update to sort these problems though