Related
hey guys, i need the update.zip that comes stock on the sd card.
if anyone needs anymore information:
my d2g freezes at the bootlogo
my bootloader never worked so it has a blank screen.
There is no stock update zip on the SD card. Make sure your phone is completely off turn on the phone by holding on the power button and up arrow at the same time. When the screen glows softly, let go of the buttons and you will be in the bootloaders sbf flash mode. If you get this far reply back
for gingerbread = http://www.multiupload.com/ZGUOERGZNT
D2GxNiNjA said:
hey guys, i need the update.zip that comes stock on the sd card.
if anyone needs anymore information:
my d2g freezes at the bootlogo
my bootloader never worked so it has a blank screen.
Click to expand...
Click to collapse
kurpter said:
for gingerbread = http://www.multiupload.com/ZGUOERGZNT
Click to expand...
Click to collapse
would this work if i had froyo when it happened?
i was installing venusX 3.2 just like your using but i got stuck at the splash and my bootloader is busted.
rootfan said:
There is no stock update zip on the SD card. Make sure your phone is completely off turn on the phone by holding on the power button and up arrow at the same time. When the screen glows softly, let go of the buttons and you will be in the bootloaders sbf flash mode. If you get this far reply back
Click to expand...
Click to collapse
theres probably something saying something about double posting but....
When i purchased my global from verizon, i immediately rooted it, but before, there was infact an update.zip included and its even on my friends global and he has never rooted his ever.
hi mate, was you on the froyo build when you upgraded to venus? if you did, this is why you are boot looping as venus needs the gingerbread build. if this is the case, you need to follow my update guide from here =
http://forum.xda-developers.com/showthread.php?t=1263722
its the last comment on the end, reflash that, then do an ota update, this will take you to the new GB version, then use oneclickroot, then you can upgrade to venus
kurpter said:
hi mate, was you on the froyo build when you upgraded to venus? if you did, this is why you are boot looping as venus needs the gingerbread build. if this is the case, you need to follow my update guide from here =
http://forum.xda-developers.com/showthread.php?t=1263722
its the last comment on the end, reflash that, then do an ota update, this will take you to the new GB version, then use oneclickroot, then you can upgrade to venus
Click to expand...
Click to collapse
your really helpful and i know for sure that works, but my "BOOTLOADER" IS BLANK.
therefore RSD isnt picking up any connection for me to SBF.
instead of saying:
Bootloader D0.11
Battery OK to program or something like that, the backlights just light up, nothing appears, and 3 seconds later it goes back to booting and staying there.
I knew about it needing gingerbread the minute i forgot to cancel the update in Rom manager. now i cant do anything but go into stock recovery.
and when i try to install a signed update from motorola it says:
--Install From SD Card...
...Finding update package...
...Opening update package...
.Verifying update package...
...Installing update package...
assert failed: file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/droid2we_vzw/cdma_droid2we/droid2:2.2.S273/2.4.330:user/ota-rel-keys" || file_getprop(/system/build.prop", "ro.build.fingerprint") == "verizon/droid2we_vzw/cdma_droid2we:2.3.3/4.5.1_57_D2G-37/110722:user/release-keys"
E:Error in /sdcard/update.zip
(Status 7)
Installation Aborted.
AND!!! my power button is jammed so it doesnt work but whenever my battery is in the phone it turns on.
Is your power button not working at all? if you can get the device to boot up, you need to hold the up and down power volume button together, this will get you in to the boot loader mode, if not see if you can hold x and the power button this will take you in to the recover mode.
if you can get in to the boot loader, then you can sbf if not, and you get in to the recover mode, you will need to copy the zip file to the root of sd card, but dont use the ginger bread zip file as it wont work, you will need the update.zip from your friends phone if he is still on froyo and then in the menu just apply the update. let me know how you get on.
kurpter said:
Is your power button not working at all? if you can get the device to boot up, you need to hold the up and down power volume button together, this will get you in to the boot loader mode, if not see if you can hold x and the power button this will take you in to the recover mode.
if you can get in to the boot loader, then you can sbf if not, and you get in to the recover mode, you will need to copy the zip file to the root of sd card, but dont use the ginger bread zip file as it wont work, you will need the update.zip from your friends phone if he is still on froyo and then in the menu just apply the update. let me know how you get on.
Click to expand...
Click to collapse
1. No, my power button is not working at all.
2a. I pushed both rockers and the BLANK screen appeared
2b. Up on Arrow Keys shows a blank screen too.
3. i have access to stock recovery but thats the ONLY thing i can access.
4. (WTF) He upgraded via the OTA and formatted his SD Card...
5. If ANYONE CAN HELP, I NEED ALL FROYO update.zips that are SIGNED so i dont waste time. my contract ends in 10 days but i havent used the phone in 3 months. ive just been using some crappy feature phone.
Hi mate, i think i have the old zip file you need, i backed up my stuff age's ago and i think this is the one = http://www.mediafire.com/?whlxcbqvhzpnczd
(dont worry it is a D2G update, i just cant remember if this is the ginger bread on of froyo.
if it isnt let me know and then i'll take my phone back do to froyo and get the update .zip for you.
Regards
Scott
kurpter said:
Hi mate, i think i have the old zip file you need, i backed up my stuff age's ago and i think this is the one = http://www.mediafire.com/?whlxcbqvhzpnczd
(dont worry it is a D2G update, i just cant remember if this is the ginger bread on of froyo.
if it isnt let me know and then i'll take my phone back do to froyo and get the update .zip for you.
Regards
Scott
Click to expand...
Click to collapse
Nope, But like the post of the log, something was different.
it had 2.4.29 and 2.4.330 in it.
is there anyway i could get my bootloader to show up again?
its been blank ever since i had it.
make sure the phone is switched off, then press and hold in the volume up and down rocker together (make sure you dont let go until it you see the bootloader menu) and plug the phone in to usb (so it powers it up) and then you should be in bootloader mode, i dont know of anyother way of doing it. Also make sure your phone is at least 70% charged.
kurpter said:
make sure the phone is switched off, then press and hold in the volume up and down rocker together (make sure you dont let go until it you see the bootloader menu) and plug the phone in to usb (so it powers it up) and then you should be in bootloader mode, i dont know of anyother way of doing it. Also make sure your phone is at least 70% charged.
Click to expand...
Click to collapse
This DOES NOT work because my bootloader doesnt show anything, (no function whatsoever.) this is what happens.
1. I hold both volume rockers
2. Backlight activated (bootloader)
3. No Words
4. Turns back off
5. No RSD or Win7 notification sounds
6. goes back to Venus bootlogo
7. Stays there until it dies
now what confuses me:
if it boots up but theres no bootloader how does it boot?
otherwise, if it does use the bootloader, why does it show up blank?
it was blank when i first got it because i was wanting to root it then.
The bootloader is launched by powering the phone on while holding the up arrow key on the physical keyboard.
Gasai Yuno said:
The bootloader is launched by powering the phone on while holding the up arrow key on the physical keyboard.
Click to expand...
Click to collapse
i already knew that,
it does the exact same thing as when i hold both rockers.
my problem is that when the backlight comes on the screen doesnt show anything.
Soooo.... No SBF to fix/
And you're sure the battery is charged?
(It doesn't charge if it can't boot.)
Gasai Yuno said:
And you're sure the battery is charged?
(It doesn't charge if it can't boot.)
Click to expand...
Click to collapse
i got my friends og droid and the battery is 100%. its been a week and it still didnt do it. oh well.... on the 11th my contract is up and i dont want to get another phone but... sprint's iphone 4s is looking pretty good now!
Hello XDA!
I have a big issue here.
I bought a Tablet from Ebay
|
v
10" CAPACITIVE MULTI TOUCH ANDROID 4.0 TABLET PC ALL WINNER A10
http://www.ebay.com/itm/10-CAPACITIVE-MULTI-TOUCH-ANDROID-4-0-TABLET-PC-ALL-WINNER-A10?item=290721601261&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D9104166066624506894
When i unboxed it the manual said the name was " N500-B " But i haven't found anything about that one either.
And the info about the " About Tab " is this
Modelnumber : BC1077
Android Version : 4.0.3
Basebandversion: 0.5
Kernel Version: 3.0.8+
[email protected] #33
Version: Crane_bc1077-eng 4.0.3 IML74K 20120407 test-keys
Problem is, that i haven't found anything about this pad, nothing at all.
And yesterday i think i ****ed it up real bad.
I installed CM9 from Slatedroid
http://www.slatedroid.com/topic/33373-rom-cm9-nightlies/
With this for wifi bt etc etc : 907c_compatibility_X.X.X.zip.
And obviously it's the wrong one.
My screen looks as if it was cracked and I can't see anything, i can't even access CWM.
What pad is this?
And is it possible to fix my problem.
Why did u install a ROM not made for your device?
Desire S • Fallout V2.0.0 • xda premium
olyloh6696 said:
Why did u install a ROM not made for your device?
Desire S • Fallout V2.0.0 • xda premium
Click to expand...
Click to collapse
I thought it would work for my pad.
Cuz it said that it worked for several pads. But now the screen is really messed up haha.
Still wondering what pad I have.
I say's Hardware : Sun4i
And if it's possible to fix my pad (lol)
olivetti olipad graphos
dietoro said:
olivetti olipad graphos
Click to expand...
Click to collapse
Erhm, what?
u should be able to fix your tab by flashing original firmware using live suite.. but for that u need to find out the name of the tab.. may b you can try sending a mail to the ebay seller and see if he can help u
Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
http://downloads.poi...28-20120412.zip
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
http://downloads.poi...2XXL V1.2.pdf
jb2kred said:
Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
http://downloads.poi...28-20120412.zip
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
http://downloads.poi...2XXL V1.2.pdf
Click to expand...
Click to collapse
I followed this and all went well until i come to the step
" Now unplug the usb cable from the tablet and plug it back into the tablet.
Wait a moment for windows to recognize the tablet. After this is done the following windows will appear.
Press Yes "
When i unplug the cable and plug it back windows says " Usb not recognized " and in the device manager it say's " Uknown device "
So livesuit never starts flashing
jb2kred said:
Just been trying to search for you tablet i think it is a clone of Protab2XXL
Try this link it has an ics image and livesuite
then follow these instructions
Turn the tablet completely and starts in UPDATE mode.
This may be difficult but this is the easiest way to correct in update mode to get:
- Turn the tablet completely and then wait a second or 10 for the security for when the screen is the tablet is not quite ready to close.
- Press 'Home' and 'Power', and press up 1 times the reset button with a paperclip or toothpick.
- Keep your 'Home' firmly and let the 'Power' button and press it 5 times. (As the count-to-5)
If all goes well and the USB cable is connected to the PC, the screen remains black and now the tablet windows sees the new device in device manager. Also notice the sound message that windows does when connecting a USB device.
Run LiveSuite and select the Image from the Zip file and hopefully it will prompt you to Format your device and will Flash it with the ICS Image
or your can follow the upgrade instrcutions in this pdf
your links is bad,please update
Click to expand...
Click to collapse
Sorry I'm typing this on a phone. I want to sell my transformer. What is the best way to clear my Rona and go back to pure factory settings? Thanks!
nvflash ( showthread.php?t=1688012 ) using a stock asus firmware from their site
Lethe6 said:
nvflash ( showthread.php?t=1688012 ) using a stock asus firmware from their site
Click to expand...
Click to collapse
The only problem is that I'm still on a beta rom from when ICS just came out. I'm on revolver it looks like. My Clockworkmod is also broken because I had a manual install, created by Roach I believe, and I then installed the one from the clockworkmod app before reading on xda not to. The tablet does not pick up that it is plugged into my computer, but it works with a wall charger. My current version of clockworkmod also won't let me update roms for some odd reason....
What would be the best way to get to a rom that will allow me to use my tablet with my computer so that I can run nvflash and restore the device to factory settings?
Thanks.
BloodyRory said:
The only problem is that I'm still on a beta rom from when ICS just came out. I'm on revolver it looks like. My Clockworkmod is also broken because I had a manual install, created by Roach I believe, and I then installed the one from the clockworkmod app before reading on xda not to. The tablet does not pick up that it is plugged into my computer, but it works with a wall charger. My current version of clockworkmod also won't let me update roms for some odd reason....
What would be the best way to get to a rom that will allow me to use my tablet with my computer so that I can run nvflash and restore the device to factory settings?
Thanks.
Click to expand...
Click to collapse
You just need to put your tablet into apx mode to flash to stock.
To do that power off the tablet
Plug the usb cable in
press and hold the power and vol up keys for about 5 seconds.
If you are on windows you should hear a notification sound.
There are a few tools you can use, like the poster above suggested
Easy Flash:
http://forum.xda-developers.com/showthread.php?t=1688012
-or-
Brk's root toolkit.
http://forum.xda-developers.com/showthread.php?t=1688447
They both essentially do the same thing but i prefer the brks toolkit for the layout.
fauxsoul said:
You just need to put your tablet into apx mode to flash to stock.
To do that power off the tablet
Plug the usb cable in
press and hold the power and vol up keys for about 5 seconds.
If you are on windows you should hear a notification sound.
There are a few tools you can use, like the poster above suggested
Easy Flash:
http://forum.xda-developers.com/showthread.php?t=1688012
-or-
Brk's root toolkit.
http://forum.xda-developers.com/showthread.php?t=1688447
They both essentially do the same thing but i prefer the brks toolkit for the layout.
Click to expand...
Click to collapse
The brks toolkit will probably more suit you, but I do have to agree, follow the above and install the latest ICS rom direct from asus, and you should be good as gold.
Did I mention that CWM auto boots up? The only way to get to android is to press power + vol up at boot up, let it load past cwm and then cold boot linux.
So I think whenever I try to get apx mode or whatever, it's trying to get into android, but it can't.
Can anyone help me? Sorry...
Okay so you're running linux with dual boot? Which method did you use to install it? Franks tools/Olife or the pseudo dual boot method.
Most threads like that will have info on going back to stock.
try power button and vol down.
otherwise when in recovery just try holding down power and vol up for a while 30 seconds plus (while plugged into a pc)
See if it will kick you into apx mode.
fauxsoul said:
Okay so you're running linux with dual boot? Which method did you use to install it? Franks tools/Olife or the pseudo dual boot method.
Most threads like that will have info on going back to stock.
try power button and vol down.
otherwise when in recovery just try holding down power and vol up for a while 30 seconds plus (while plugged into a pc)
See if it will kick you into apx mode.
Click to expand...
Click to collapse
No, I didn't. I have to do "cold boot linux" which brings me into android.
I try to run adb and it cannot find the device, so I cannot do anything. I can boot into android, but I cannot wipe or change roms due to this cwm being broken.
Which method did you use to install it? Can you be more specific about what exactly is on your tablet right now?
Is your USB cable good? Can you sync from within a computer?
Did you install the apx drivers from windows?
I have yet to see a device that does not enter apx mode. When mine was looping in CWM only, this is the method I used to fix it. Unless your USB cable is damaged or you don't have the drivers installed... I "unbricked" 4 devices using apx without any issues.
As fauxsoul said, please provide install method and step by step of what you're doing.
I am a Noob when it comes to rooting and what not but please spare a minute to help me out
I wanted to root my Xperia Mini Pro so a thread had sent me to the Sony website which shows how to root
I cant seem to put the link since im new so i will break it up into 5 parts (Just join them together)
http ://talk.sony mobile .com/thread/ 41119?start=0&tstart=0
SO anyways, in brief, to Root my phone using DoomLords root i have to downgrade my phone to a previous Kernal since the one i am currently using is unrootable
Current Kernal - 4.1.B.0.587
Kernal to flash to - 4.1.A.0.562
So in order to Flash it I have to use Flashtool
Now the real problem (Sorry for the lengthy explanation, want this to be fixed ASAP)
Now in order to do it there are instructions to put the phone into flash mode
Image Attached
Okay, I follow everything, Ofcourse Unknown Sources is Checked and so is USB Debugging and It is on MSC Mode
When i Hold the Back key and Plug it in the PC, that window still stays there
Is it because my back button is touch and not a button as in the picture?
Do i need to press another button since my back button is touch and cannot be detected?
I need all the help i can
Thanks
EDIT
Okay I have successfully Flashed and Rooted my phone
After playing around with it I found out that Since my phone has touch buttons, you have to instead hold down volume down key when plugging it in
So all Users who use an Xperia phone with touch buttons, dont follow the instruction on screen, press and hold the volume down button sintead of the back button
Cheers
Just to make it clear
Naweed Reza said:
EDIT
(...)
After playing around with it I found out that Since my phone has touch buttons, you have to instead hold down volume down key when plugging it in
So all Users who use an Xperia phone with touch buttons, dont follow the instruction on screen, press and hold the volume down button sintead of the back button
Cheers
Click to expand...
Click to collapse
Since I just had my friends phone rooted and unlocked... A few words about Mini Pro versions.
Please keep in mind, that there are atleast two HARDWARE releases/versions of model named in the market Xperia Mini Pro
1. The one sold in 2010/2011 is u20/u20i -> hardware buttons at bottom, Phone powered off, BACK button pressed while connecting USB to enter flash mode. This one works on old kernel, Android 2.1 (upgrade to ICS/JB version+MiniCM10 well, gave it a kick! I must admit, I was watching miniCM6 & 7 becoming slower every month ).
2. The one u all most probably buy now is sk17i -> one hardware button at button. Phone powered off, VOL+/VOL- button pressed while connecting USB to enter flash mode (u'll see characteristic blue diode flash when it happens). This one works on ICS kernel, Android 4.0
Please keep in mind: unrooting is not unlocking bootloader - my friend mixed those 2 things forcing me (with a lots of whiskey) to do both - at the end he decided to remain with stock s/w since its on ICS
In case smthng went really bad, keep in mind that boot-to-flash thing and use PC Companions Repair option to load clean stock SE/Sony firmware. Saved my ass more than several times
Naweed Reza said:
I am a Noob when it comes to rooting and what not but please spare a minute to help me out
I wanted to root my Xperia Mini Pro so a thread had sent me to the Sony website which shows how to root
I cant seem to put the link since im new so i will break it up into 5 parts (Just join them together)
http ://talk.sony mobile .com/thread/ 41119?start=0&tstart=0
SO anyways, in brief, to Root my phone using DoomLords root i have to downgrade my phone to a previous Kernal since the one i am currently using is unrootable
Current Kernal - 4.1.B.0.587
Kernal to flash to - 4.1.A.0.562
So in order to Flash it I have to use Flashtool
Now the real problem (Sorry for the lengthy explanation, want this to be fixed ASAP)
Now in order to do it there are instructions to put the phone into flash mode
Image Attached
Okay, I follow everything, Ofcourse Unknown Sources is Checked and so is USB Debugging and It is on MSC Mode
When i Hold the Back key and Plug it in the PC, that window still stays there
Is it because my back button is touch and not a button as in the picture?
Do i need to press another button since my back button is touch and cannot be detected?
I need all the help i can
Thanks
Click to expand...
Click to collapse
You have the 4.1.A.0.562 kernal? Can you share it with me? I can hardly find it!
TF300T - No unlock , No root
1.Shutdown your tablet
2. Hold Power + Vol Down until a message appears ("Press Vol. Up to enter RCK (5s)")
3. Press Vol Up .
4. Android Rebot laying down (red lable)
Please help.
Cannot into RCK. Need install Recovery or not?
Thanks
Well, what are you trying to do?
If you want to install a custom ROM or a custom recovery, you need to unlock your device first.
When running stock ROM, why do you need recovery?
If you have issues with stock ROM ASUS support should be helpful.
Sent from my TF300T using XDA Premium HD app
z1022 said:
TF300T - No unlock , No root
1.Shutdown your tablet
2. Hold Power + Vol Down until a message appears ("Press Vol. Up to enter RCK (5s)")
3. Press Vol Up .
4. Android Rebot laying down (red lable)
Please help.
Cannot into RCK. Need install Recovery or not?
Thanks
Click to expand...
Click to collapse
If you have stock ROM and you hold power+Vol down then Vol Up...it will boot into stock rom recovery...which is the android robot laying down. Nothing wrong there...that's what is supposed to happen.
That is the same way to get to a CUSTOM recovery such as TWRP but in order to install that, you need to have your tablet unlocked using the Asus APP unlocker. This is downloadable from the Asus website. Read carefully before you install it...if you don't care to install custom ROMs, then dont bother.
If I have stock ROM ICS 4.30 and unroot , unlock and I hold power+Vol down then Vol Up... It only show data wipe and android icon.
Some one in this forum said that also have a USB icon. However, I cannot find it.
How to show the USB icon? Need update to JB loader or unlock the table.
Anyone can help?
z1022 said:
If I have stock ROM ICS 4.30 and unroot , unlock and I hold power+Vol down then Vol Up... It only show data wipe and android icon.
Some one in this forum said that also have a USB icon. However, I cannot find it.
How to show the USB icon? Need update to JB loader or unlock the table.
Anyone can help?
Click to expand...
Click to collapse
If you are on stock ICS ROM and you hold power+vol down, you should see wipe data, the USB icon and Android icon. Use vol down to move the cursor to the usb icon and then use Vol up to select...
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
It cannot show USB icon.
May be NeED TO UNLOCK OR UPDATPE TO JB?
Anyone in 4.03 and unlock can see the usb icon.
z1022 said:
It cannot show USB icon.
NeED TO UNLOCK OR UPDATPE TO JB?
Click to expand...
Click to collapse
What do you see when you hold power+vol down?
No you don't need to update to JB to see this...JB has 4 icons, ICS has 3.
Is USB debugging ON?
It is possible you may have to unlock to get the USB icon...
I forget since I did it awhile ago...
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
00T - No unlock , No root,usb debugging on
1.Shutdown your tablet
2. Hold Power + Vol Down until a message appears ("Press Vol. Up to enter RCK (5s)")
3. Release all key
Only see wipe data and adroid icon
Like below link pic
http://forum.xda-developers.com/showthread.php?t=1829666
z1022 said:
00T - No unlock , No root
1.Shutdown your tablet
2. Hold Power + Vol Down until a message appears ("Press Vol. Up to enter RCK (5s)")
3. Release all key
Only see wipe data and adroid icon
Like below link pic
http://forum.xda-developers.com/showthread.php?t=1829666
Click to expand...
Click to collapse
Before you proceed with the following, it is really important to tell me what you eventually want to do.
If you don't care, then go ahead and try first:
1. Go to settings, developer options, make sure USB debugging is checked. Then do the power+vol down to see if USB icon appears.
2. If that doesn't work, try settings, backup and reset, then reboot with power+vol down. Warning: This resets everything so all your data will be erased.
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
xxboarderxx,
Thank you for your hlep.
point 1 and point 2 have already try. Still only 2 icon show and no USB icon.
I think it should be need to unlock the table or update to JB.
I just want to know other user have same issue or not before I unlock or update the table.
Uhmmmm. The extra 2 icons show when you upgrade to jb. The jb upgrade includes an upgrade to the bootloader which is where these icons appear.
That being said if you don't intend to unlock or use fastboot mode, then you don't need these and perhaps you should stop trying to mess around in sensitive areas. If your intent is to unlock, root, update to the latest firmware and or load a custom ROM, there is a guide in the general section which explains all of this starting in ICS and moving up to jb. Go find it.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
funnel71 said:
Uhmmmm. The extra 2 icons show when you upgrade to jb. The jb upgrade includes an upgrade to the bootloader which is where these icons appear.
That being said if you don't intend to unlock or use fastboot mode, then you don't need these and perhaps you should stop trying to mess around in sensitive areas. If your intent is to unlock, root, update to the latest firmware and or load a custom ROM, there is a guide in the general section which explains all of this starting in ICS and moving up to jb. Go find it.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Two extra icons appear in JB yes but the usb icon should be there even with ICS. I can confirm since I soft bricked my tablet on ICS when I first got the tablet and needed to fast boot and nv flash using apx to get it working again... He's messed something up and the only way to really get everything back is to restore to stock. However he won't tell me what he intends to do so I can't really help him any further...
Sent from my SGH-I727R using xda premium
xxboarderxx said:
Two extra icons appear in JB yes but the usb icon should be there even with ICS. I can confirm since I soft bricked my tablet on ICS when I first got the tablet and needed to fast boot and nv flash using apx to get it working again... He's messed something up and the only way to really get everything back is to restore to stock. However he won't tell me what he intends to do so I can't really help him any further...
Click to expand...
Click to collapse
As I see it, the only reason to unlock your tablet is to get access to fastboot, right?
So it seems reasonable, that the USB/fastboot icon is not showing on a locked device.
Might be all quite as intended.
Unfortunately I can't check this, as my tablet is already unlocked, but it seems like a good guess.
Sent from my TF300T using XDA Premium HD app
f69m said:
As I see it, the only reason to unlock your tablet is to get access to fastboot, right?
So it seems reasonable, that the USB/fastboot icon is not showing on a locked device.
Might be all quite as intended.
Unfortunately I can't check this, as my tablet is already unlocked, but it seems like a good guess.
Sent from my TF300T using XDA Premium HD app
Click to expand...
Click to collapse
You might be right. I can't remember if I had usb icon after unlocking bootloader or before. I just know there is a possibility of having 3 icons with ICS.
Sent from my SGH-I727R using xda premium
f69m said:
As I see it, the only reason to unlock your tablet is to get access to fastboot, right?
So it seems reasonable, that the USB/fastboot icon is not showing on a locked device.
Might be all quite as intended.
Unfortunately I can't check this, as my tablet is already unlocked, but it seems like a good guess.
Sent from my TF300T using XDA Premium HD app
Click to expand...
Click to collapse
+1 - usb icon appears after unlock.
Android on back is stock recovery with no file to install found, correct response.
Thank you for all.
It seems need to unlock the table.
I just received the table few days, I will unlock the table after one month if the hardward is no problem.
z1022 said:
Thank you for all.
It seems need to unlock the table.
I just received the table few days, I will unlock the table after one month if the hardward is no problem.
Click to expand...
Click to collapse
Good choice!