[POSTED IN THE WRONG FORUM. REPOSTED @ http://forum.xda-developers.com/showthread.php?t=1174493]
Hello Folks,
I seem to have a problem and I can't find an answer in the forums.
I rooted my Asus Transformer with Android 3.1 using this method: http://forum.xda-developers.com/showthread.php?t=1125714
I only rooted the Transformer, I didn't install CWM. Everything was working fine until my overenthusiastic wife updated the tablet with the 8.4.4.11-20110711 update. Suddenly my tablet was unrooted again. I thought "No problem, no harm's done, I'll just reinstall the stock 3.1 and then root the device once again and just leave the new update for what it is for the moment."
The problem is that I can't get into APX mode anymore. When I try to start the device with vol+ and the power button, nothing's happening. Both buttons are working fine (neither's stuck). I thought that the device might just be showing me a blank screen but when I press and hold vol+ and the power button for 5, 10 or 30 seconds then wait 30 secs and start adb.exe it says my device isn't connected.
When I press vol- and the power button I do get the option to wipe all my data and factory reset (which I tried and is working).
When I press vol- and the power button then vol+ when it's booting to get into RCK (recovery kernel mode) I get a droid image with a yellow triangle with an exclamation mark. Nothing happening.
Anyone got a clue what's going on and or how I can solve this issue?
The Transformer is working fine besides not being able to get into APX mode btw. I can use it, just can't root it anymore.
same situation here, just bought my eeePad today, updated to .11 version....now trying to root but can't figure out how...
I'm having the same problem. Brand new transformer, rooted it, and now I can't get it to boot past the splash screen. Tried putting it back into APX mode, and it doesn't work. Anyone find a solution to this?
I didnt even root mine and i have this ****ing problem -.-
Same problem..
You'll notice if you watch the device manager on windows, it flashes a refresh but the device doesn't show up. Looks like it's trying to work but doesn't catch..
SSame here after using Brk's on my 3.2 B70 tf101.
Same here. 3.1, rooted, CWM.
Same here on an Asus running Android 3.2.
Serial number B60KA.
Build number on mine is 8.6.5.9-20110816.
Anyone find a solution to this?
My friends tablet is at HTK75.US-8.6.5.13-20110925 and I just got it in to APX mode.
I had the Transformer turned off and plugged in, held vol up + power until I hear the first US notification noise and released the two buttons. The searching for drivers screen came up and it installed "Nvidia Bootloader Recovery" And now my safe to eject calls it APX.
I found if you hold the power and volume up for too long it messes things up.
Any news anyone? I would love to know how to do get into APX mode. The volume + and power is not working for me like the others (did it all conceivable ways).
APX already on
Hi, I solved this problem very easy.
Just connected my eeePad, installed the APX driver after Volume up and Power on Button and it was working. You will see nothing on eeePad screen. Just check the device manager on your computer.
Related
Hello Folks,
I seem to have a problem and I can't find an answer in the forums.
I rooted my Asus Transformer with Android 3.1 using this method: http://forum.xda-developers.com/show....php?t=1125714
I only rooted the Transformer, I didn't install CWM. Everything was working fine until my overenthusiastic wife updated the tablet with the 8.4.4.11-20110711 update. Suddenly my tablet was unrooted again. I thought "No problem, no harm's done, I'll just reinstall the stock 3.1 and then root the device once again and just leave the new update for what it is for the moment."
The problem is that I can't get into APX mode anymore. When I try to start the device with vol+ and the power button, nothing's happening. Both buttons are working fine (neither's stuck). I thought that the device might just be showing me a blank screen but when I press and hold vol+ and the power button for 5, 10 or 30 seconds then wait 30 secs and start adb.exe it says my device isn't connected.
When I press vol- and the power button I do get the option to wipe all my data and factory reset (which I tried and is working). When I press vol- and the power button then vol+ when it's booting to get into RCK (recovery kernel mode) I get a droid image with a yellow triangle with an exclamation mark. Nothing happening.
Anyone got a clue what's going on and or how I can solve this issue?
The Transformer is working fine besides not being able to get into APX mode btw. I can use it, just can't access apx mode anymore.
P.S. Sorry for the double post. I first posted this question in the general Q&A forum instead of this Transformer Q&A where it belongs.
i thought you had to press power + vol down then pressed vol up? unless i'm remembering incorrectly.
Zepius said:
i thought you had to press power + vol down then pressed vol up? unless i'm remembering incorrectly.
Click to expand...
Click to collapse
That is to get into the recovery mode, not APX. APX is power + vol up
superevilllama said:
That is to get into the recovery mode, not APX. APX is power + vol up
Click to expand...
Click to collapse
then i guess i remembered wrong
Found the solution to my own problem. I had to:
1 - Press and hold Volume down + power button.
2 - Press volume up to enter recovery mode.
3 - Wait till it shows the droid with the triangle and exclamation mark image.
4 - Press volume up + power button.
5 - Wait a bit...et voila...APX mode.
Reinstalled stock 3.1. Rooted. Installed Clockworkmod. Installed prime 1.5. Made a Nadroid backup and I should be funky-friends-proof now .
Now I can enter the APX mode once again by just simply holding the volume up + power button. No idea why I had to use some Mortal Kombat secret finisher key combo after updating to 8.4.4.11.
Ok so I'm trying to get my TF into APX mode and I followed the instructions of getting into recovery first and then holding Vol up and Power but that just shuts the TF back down. I am running 3.1 and .11.
dredhead4 said:
Ok so I'm trying to get my TF into APX mode and I followed the instructions of getting into recovery first and then holding Vol up and Power but that just shuts the TF back down. I am running 3.1 and .11.
Click to expand...
Click to collapse
Have you just tried with out going into recovery first?
Also your TF must be plug into the USB for it to go into APX mode
Try pressing Volume UP and Volume DOWN and Power for about four seconds, I hope that will bring it in APX. It worked with mine TF101.
Ok well I got in APX mode by holding Vol Up and Down but now I need to install the drivers :/. Any ideas? I googled it and ended up finding it but I don't know how to get it installed.
dredhead4 said:
Ok well I got in APX mode by holding Vol Up and Down but now I need to install the drivers :/. Any ideas? I googled it and ended up finding it but I don't know how to get it installed.
Click to expand...
Click to collapse
You will find this helpful: http://forum.xda-developers.com/showthread.php?t=1185104
Hi, i have the same problem, but ur solutions didn't work with me.
i got the TF and it has 3.1 and i updated it to 3.2 and then googled for a rooting method for it, and i found one that says it will work for 3.2 but the man who posts it didn't try it.
so i tried it, but it didn't root my TF.
and when I try ur ways with holding Power + Volume Down then Volume Up, it takes me to Clockworkmod instantly, and not to "the droid with the triangle and exclamation mark image"
and i don't know what to do there, so plz help me if there is a way to fix it, I REALLY NEED TO ROOT MY TF.
thx.
what if vol+ button doesn't work? I can't get into apx mode to unroot, flash stock recovery and stock rom
r3ap3r said:
what if vol+ button doesn't work? I can't get into apx mode to unroot, flash stock recovery and stock rom
Click to expand...
Click to collapse
If you can get into CWM recovery you can flash back to stock.
You'll need a working power button and at least a Vol down button.
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
i have repacked stock rom (WW) but with root app (cannot remove). This tutorial has correct rom (without root app) but US rom. It's problem?
r3ap3r said:
i have repacked stock rom (WW) but with root app (cannot remove). This tutorial has correct rom (without root app) but US rom. It's problem?
Click to expand...
Click to collapse
If you scroll down to the Comments section, there's a link to repacked WW version
without SU app
Here http://www.megaupload.com/?d=2YGL4K9C
:facepalm: thanks a lot! Wish me luck!
works like a charm!
My Tf got stuck at the logo Eee Pad boot after I tried to restore the old rom, and now it can't do anything except boot and stuck at the logo.
I tried the nvflash unbricking technique from rayman84 : http://forum.xda-developers.com/showthread.php?t=1123429
, but my TF only listed as unknown device when I tried to get to APX mode and it also said,
"This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
Now I don't know what else to do. Please help! I hope I am not completely bricked the device yet.
Have you tried the button combo to get into recovery?
Press and hold the Vol down + power button.
When prompt, you'll see lines of words at the top left of the screen, push the Vol up button immediately within 5 sec to get into recovery.
Apparently, I didn't know the button combo. Anyways you save my niece's TF. Thanks a bunch
Edit: although the tablet is working now, it still got the message usb unknown device. Do you know how to fix it?
Hi, i don't know if i should post a new thread but my problem is almost the same as bengob3t's one.
I have a brand new TF101 with a B70 Serial number, but i successfully rooted it using the RazorClaw Tool. Then i tried to install clockwork mod followin this topic : http://forum.xda-developers.com/showthread.php?t=1106587
I directly applied the instructions from step 8 (download hashmyfiles etc...) and i rebooted my Eee pad manually step 13
I didn't see any progress bar, but my device is stuck on the Asus screen, and the speakers make stange noises at regular intervals.
I am able to go into recovery though (power + vol down then vol up) but the factory reset doesn't work, and i cant really do anything (at least not anything that i know what it is).
Is my tablet definitely bricked ? If not, how can i bring it back to life ?
I wasn't able to use NVFlash, as i can't seem to go in APX mode. I press power+vol up, i hear the sound usb device connected and immediately after i hear the sound "usb device disconncted"
Nvflash says
"Nvflash started
rcm version 0X4
Command send failed (usb write failed)"
Thanks in advance for your help.
EDIT : When i put the micro sdcard from my phone into the tablet, i am able to mount it. So i will probably be able to flash something from it, but what ? Do i have to flash a recovery ? Directly a custom rom ?
I'm a little lost, but i'll try to give you guys as mush info as i can find.
EDIT2 : I flashed the PRIME rom, everything seems to be back to normal... if you got info on my situation, don't hesitate to fill me in ^^ i'd like to understand what i did wrong, even though i dodged the bullet.
bengob3t said:
Apparently, I didn't know the button combo. Anyways you save my niece's TF. Thanks a bunch
Edit: although the tablet is working now, it still got the message usb unknown device. Do you know how to fix it?
Click to expand...
Click to collapse
Do you have the correct driver installed? Do you have Asus sync install on your PC?
hmm.. I'm not sure. I downloaded the unbricked tool nvflash file, and the tool already had usb driver inside it. Is that the driver you were talking about? I never were able to get to the point where I need to point the APX to where the driver located because it always said unknown driver the whole time.
Hi All..
My TF300 is unlocked. I installed the new JB and then I was trying to install CWM. I used fastboot to push it to the device. When I rebooted, holding down the volume button, It came up to the menu with RCK, USB, etc. I selected wipe data by accident. It sat there for a while saying it was going to wipe and go into the boot loader. After a while I shut it off thinking it was hung. Now when I power on the device I get only the ASUS startup screen. Volume up or down don't affect the mode. It just says "The Device is Unlocked" at the top, and the static ASUS logo in the middle. When I plug in the USB to my Windows 7 computer I get nothing in the device listing. I can't even fully turn the device off. Holding power for a few seconds, it goes off, and then it comes right back on by itself.
I think I'm totally bricked, right? It won't even go into APX mode it appears.
thanks ...
arch.fadi said:
Hi All..
My TF300 is unlocked. I installed the new JB and then I was trying to install CWM. I used fastboot to push it to the device. When I rebooted, holding down the volume button, It came up to the menu with RCK, USB, etc. I selected wipe data by accident. It sat there for a while saying it was going to wipe and go into the boot loader. After a while I shut it off thinking it was hung. Now when I power on the device I get only the ASUS startup screen. Volume up or down don't affect the mode. It just says "The Device is Unlocked" at the top, and the static ASUS logo in the middle. When I plug in the USB to my Windows 7 computer I get nothing in the device listing. I can't even fully turn the device off. Holding power for a few seconds, it goes off, and then it comes right back on by itself.
I think I'm totally bricked, right? It won't even go into APX mode it appears.
thanks ...
Click to expand...
Click to collapse
When you hold down the power button to turn it off, as soon as the screen goes off, let go of the power button and hold the VOL up button. Wait a second or so and then let go of the VOL button. The tablet should go into APX mode. It can be quite hard to time it right, but the tablets screen should stay blank, without rebooting.
thanks for ur care
i forget to update the post ...sorry
.....i do that and my pc show apx driver but fastboot did not work ....
how can i use fastboot again to install bolb again ?????????
thanks in advance
chappie1970 said:
When you hold down the power button to turn it off, as soon as the screen goes off, let go of the power button and hold the VOL up button. Wait a second or so and then let go of the VOL button. The tablet should go into APX mode. It can be quite hard to time it right, but the tablets screen should stay blank, without rebooting.
Click to expand...
Click to collapse
thanks for ur care
i forget to update the post ...sorry
.....i do that and my pc show apx driver but fastboot did not work ....
how can i use fastboot again to install bolb again ?????????
thanks in advance
ME Too and hundreds of Others
arch.fadi said:
thanks for ur care
i forget to update the post ...sorry
.....i do that and my pc show apx driver but fastboot did not work ....
how can i use fastboot again to install bolb again ?????????
thanks in advance
Click to expand...
Click to collapse
I've been searching the web for two weeks - nobody has a solution !
I've tried everthing.
Asus has a way to reset the OS as several owners have sent their unlocked "Bricked" tablets to their service center.
Last repair I read online stated that Asus returned their TF300T with the latest version of JB installed.
Asus would be Wise to post a solution - Imagine the goodwill that would generate.
Many thanks...
Q:did asus change mother board?
Or it kind of software fixed
I read about SKB..... What sbk?
I've had my eee Pad Transformer TF101 for a few years now. I've had it rooted for most of the time, I've installed several roms before. But a few months ago I hard bricked (Pretty sure it's a hard brick) my tablet installing a new rom.
It will turn on, but it well stay on the ASUS logo for 5 minutes then turn off and start back at the ASUS logo until it turns off again. I use the power and down key to somewhat access recovery. I attempt to access recovery but all I get is a screen with an android on it's back with the red explanation point signal. The blue bar under the android acts like it loading, but I never get past this screen, and after a few minutes it will reboot to the ASUS logo again.
Also when I plug my tablet into my computer it will recognize that something is plugged in but is unable to install the driver. I've attempted to install other drivers but my computer wont allow me to, it keeps telling me the driver I have installed is the best driver, even though its not working.
I've looked all over xda, and I've tried easyflasher and peri. but I'm unable to connect to my computer successfully in order to get either to work.
Does anyone have any advice?
You need to get the Universal Naked Drivers installed
If you are running 64bit Windows, disable driver signing from safemode options - or use Win 7 32bit
Win 8.x needs driver signing disabled for both flavours
--
You need to stick the TF into APX mode (Power off then Vol up & power till the PC recognises it and tries to install the drivers) then install the above drivers and try Easyflasher again
I got the Universal Drivers working a few hours ago. I was able to boot into APX and have my transformer recognized by my computer. I ran Easyflasher several times trying to flash a recovery and using the stock/unbrick option, but it hadn't ran all the way through or told me on the tablet that it was successful until a few minutes ago. I tried again a few minutes ago and Easyflasher went all the way through and the tablet stated on screen that it was successful, excpet now I can't boot at all or even attempt to pull up recovery, it now doesn't boot into anything but APX.
Did you use the correct SBK on Easyflasher?
B6O serials and earlier are SBK1, some B7Os too, the rest above are SBK2
Wont do any harm using the wrong one, it just wont work
And to get out of APX mode, hold power for 30 seconds~, then power on normally
--
Did you try flashing it back to stock using the stock firmware instructions on the Easyflasher page ?
If you only flashed TWRP recovery, you will need to power on normally (not recovery) at least once and hopefully see the blue update progress bar under the ASUS logo for a few seconds while it updates RCK - then you should be able to power off and press VOL DOWN & POWER till you see the white text at the top of the TF screen - then release all buttons and within 5 seconds, hit POWER UP once to enter recovery
Hi!
I've read many threads and I haven't found the answer I'm looking for.
I've flashed the 5.1 update via TWRP on my tablet, and in the first boot it rapidly installed something, rebooted and never worked again. I can't use adb fastboot because my pc doesn't recognize my tablet. It shows as APX. I've tried to install the APX drivers and I can't, even after I reboot into advance settings.
Have I not read the correct post? Please help get my tablet back. I know it was stupid of me not to disable wifi before deleting the TegraOTA, I was in a hurry and forgot. Is there any hope?
Thanks for your patience.
Sounds like it took the forced update to kill it. If you can't get into the bootloader to use fastboot I don't think you'll be able to do much.
I might have done the same thing as you. If you do vol down+power does that still start up? if so this worked for me
https://forum.xda-developers.com/shield-tablet/help/help-stuck-nvidia-boot-screen-t3076462
I'm stuck now I'm on the stock rom and dont want to connect to wifi and get a killswitch, but I can't get a custom recover to load to change roms
Edit: When on the laying down android with "no command" if you hit the power+volup+voldown it will go into recovery settings. I guess the custom recovery isn't really flashing over.
Unplug USB cable press power for 30 seconds and then press the power and vol down should go to bootloader if your tablet didn't get kill switched. If it still doesn't boot and shows apx once connected then its been kill switched. Pressing power and vol up will place it into apx mode by default.
Sent from my SHIELD Tablet K1 using Tapatalk