[Q] $50 to anyone who can help me fix my SGH-T959P - General Questions and Answers

My phone's been stuck in downloading mode for a week, and it's affecting my efficiency (and my sanity), so now I'm offering some money.
I have a Telus Fascinate 4G SGH-T959P. I wanted to get 2.3.3 on it, so I installed CWM, did a set of backups, and then, because there is no forum area for this phone, I guessed that it must be the Canadian equivalent of the T959V (The Samsung G4), and I loaded a ROM for that phone (I know now I was wrong), and now all my phone will do is go to downloading mode.
Using Odin3 1.7, I have tried writing half a dozen things to the phone, including kernels and roms for the infuse, the regular fascinate, and the 4G, just hoping to get the phone to boot so I could reinstall my CWM backups, but i can't get anything to work.
Now I think I have 4 options. From least to most desirable they are:
4) Electro-toast the phone with a BBQ lighter, and send it in for warranty ("It just quit working one day!?!??"). This would be slow, and scores some bad karma points.
3) I can find someone to send the phone to who can fix it and send it back. This would be great but would still take a week or two.
2) Learn how to extract what I need from a working phone, then go into future shop, buy a new phone, take it into the parking lot, do the frankenstein thing, and take the new phone back in and return it. This would be quick, but risky, time consuming and difficult (I imagine).
1) Find someone on XDA who can get me the file I need, paypal them a $50 reward for motivation. This way, I have fast expert help.
So I welcome any thoughts and comments, but mostly would welcome a .tar file for odin to revive this puppy. If you are the guy who gets me the successful file, I promise I will be very, very happy to send you $50. Or if you can think of a way to get the phone to boot that I can do here in my internet connected RV out in the middle of nowhere, that would qualify too.
P.S. do we need a forum area for this phone?
Thanks everyone.

I just ordered this phone over the weekend hoping to do what you tried and failed at. I guess I should have done more research before ordering . Since I'm planning on using it on AT&T, luckily I see that it has been successfully rooted and unlocked here http://forum.xda-developers.com/showthread.php?t=1076493
I'm still hopeful that there will be more support coming for custom roms since this is still on 2.2 but a pretty new phone.
I have not received the phone yet, but would be happy to help you out once I do get it in a few days. I'm noob to andriod though so might need some good detailed instructions from you. Hit me up if you still need help and Ill let you know once I get the phone.

Well I'm not really confident on what has to happen either (as evident by my phone's current state), but I read somewhere about a process using a shell on your PC where you pulled all the needed stuff from the phone, then compiled them into a tar file that you could then use in odin. That sounded like what has to happen. I just spent 10 minutes but can't find the thread now... I saved the link on my netbook which is not in front of me atm. At any rate, I would recommend NOT WRITING anything back to your phone until you're sure you know it's going to work. If you create something and upload it, I can throw it at mine.

Thanks for the interest everyone, I have successfully unbricked my SGH-T959P!!! I finally went with plan '2'.. I bought another one (this solved my urgency issue and got me back into my google account eg: calendar, notes etc. immediately), and it will be returned virtually virgin in a couple days. It was definitely a lot of research, and effort, but I'm extremely happy to have my phone back.
The key to my success was a post on xda where a guy explained how he did a system backup using adb (search for rotobackup), so I did that. It created one big tar file, but when odin tried to send that, it still choked. So I thought to try to send them one by one. I went back and created a separate tar file for each system file (some didn't need to be tarred), and odined them one by one to figure out which ones were okay. I was able to send to the phone: boot.bin, efs.rfs, factoryfs.rfs, modem.bin, paramlfs.rfs, pit.pit, sbl.bin, and zimage. Eventually, the phone booted up like a factory fresh unit! =D After that, the rest was relatively easy. So now I shall keep those files on my PC in case I or someone else needs them.
Thanks to the xda community, wouldn't've had a chance in hell without you guys.
-Ryan.
Sent from my SGH-T959P using XDA App

rryanosman said:
Thanks for the interest everyone, I have successfully unbricked my SGH-T959P!!! I finally went with plan '2'.. I bought another one (this solved my urgency issue and got me back into my google account eg: calendar, notes etc. immediately), and it will be returned virtually virgin in a couple days. It was definitely a lot of research, and effort, but I'm extremely happy to have my phone back.
The key to my success was a post on xda where a guy explained how he did a system backup using adb (search for rotobackup), so I did that. It created one big tar file, but when odin tried to send that, it still choked. So I thought to try to send them one by one. I went back and created a separate tar file for each system file (some didn't need to be tarred), and odined them one by one to figure out which ones were okay. I was able to send to the phone: boot.bin, efs.rfs, factoryfs.rfs, modem.bin, paramlfs.rfs, pit.pit, sbl.bin, and zimage. Eventually, the phone booted up like a factory fresh unit! =D After that, the rest was relatively easy. So now I shall keep those files on my PC in case I or someone else needs them.
Thanks to the xda community, wouldn't've had a chance in hell without you guys.
-Ryan.
Sent from my SGH-T959P using XDA App
Click to expand...
Click to collapse
Nice! Congrats...glad u got it fixed. I unfortunately still haven't received my phone... delivery from Canada seems to be slower than I thought You should attach the files to the op anyways or maybe I can do it once I get my phone. Are u still planning to try and find a rom for this phone? Let me know if u have any luck because I haven't been àble to find anything. Kind of bummed that ill have to use 2.2 for a new phone and touchwiz. And the fact that there is no separate section for this phone (not even the telus fascinate 3g+) on here doesn't give me much hope that development support will be coming

Agreed on the lack of popularity. And ya probably nothing can be done about it. I would be interested in rolling our own roms, but I just don't have the time to play with that stuff, so might have to just live with stock and meager samsung updates. We'll see.
Sent from my SGH-T959P using XDA App

Do Not flash T959P
[WARNING!] Do Not flash Any ROM T959P
stuck in download 100%
no ROM available so far for Telus model

Well it seems I'm totally bricked. ryanosman, what order did you flash those files in?
NVM, looks like I got it!

For anyone else, it was a few weeks ago, but I think you use the PDA slot. (PLEASE correct me if I'm wrong.) And I'm quite sure it doesn't matter what order.

I used phone slot. It's the only place the .tar files would show up.
The only thing that seemed critical order wise (the only thing that worked for me anyway) was to install modem last, other wise the phone just sat there vibrating.
Thanks again for the files ryan!
Sent from my SGH-T959P using Tapatalk

hey rryanosman can you pm me or email me the tar files you used, i am in desperate need.
Thanks

Please send the device to me. I did the UnBrickable mod on the SGH-i959.. I was able to locate the proper combination for UnBrickable mod on the Fascinate without removing the procesor. I'd like to attempt the same on the 959P...
It may be just like the 959, but to be sure I'd like to take a shot at it and do it for free, but you pay shipping. I'll make it UnBrickable if I can.
edit: of course, I'll also unbrick the device and release a Heimdall One-Click for restoration to stock with a 959P.

Argggg, I am about to give up.
finally Got it to boot no modem function, not sure if all files are good, so i seen you post that you took the backup of all the files from the phone and got yours back up and running, just the person i needed to talk to, someone with all the files and not the collection from sever places to make up all the files i needed..
Where could i get my hands on them files as well.. Mine is messed, and i have tried everything. I have even restored it to boot up, and it has no Radio working in it Wifi works just no Packet Data and no IMEI in my phone, and tried several other modem files, etc. WOuld be nice to just have a copy of actual T959P firmware right from a working phone. I download several roms that say compelete to only extract, and there is 4 or more files missing from them. But if i can get that backup you made it would be much appricated.
if you need to i can set up free access to my servers FTP, and give you an account. You can use it as you wish as my account is unlimited..
rryanosman said:
Thanks for the interest everyone, I have successfully unbricked my SGH-T959P!!! I finally went with plan '2'.. I bought another one (this solved my urgency issue and got me back into my google account eg: calendar, notes etc. immediately), and it will be returned virtually virgin in a couple days. It was definitely a lot of research, and effort, but I'm extremely happy to have my phone back.
The key to my success was a post on xda where a guy explained how he did a system backup using adb (search for rotobackup), so I did that. It created one big tar file, but when odin tried to send that, it still choked. So I thought to try to send them one by one. I went back and created a separate tar file for each system file (some didn't need to be tarred), and odined them one by one to figure out which ones were okay. I was able to send to the phone: boot.bin, efs.rfs, factoryfs.rfs, modem.bin, paramlfs.rfs, pit.pit, sbl.bin, and zimage. Eventually, the phone booted up like a factory fresh unit! =D After that, the rest was relatively easy. So now I shall keep those files on my PC in case I or someone else needs them.
Thanks to the xda community, wouldn't've had a chance in hell without you guys.
-Ryan.
Sent from my SGH-T959P using XDA App
Click to expand...
Click to collapse

Check out post 43. It will hopefully have everything you need. I've brought mine back from the brink several times.
http://forum.xda-developers.com/showthread.php?t=1225593&page=5

Thanks thanks thanks
07blackwater said:
Check out post 43. It will hopefully have everything you need. I've brought mine back from the brink several times.
http://forum.xda-developers.com/showthread.php?t=1225593&page=5
Click to expand...
Click to collapse
Finally back, after tiring 3 weekes of searching and downloading everything around the block, i am up and running. Thanks so much again "07blackwater"... I owe ya one. Thanks again for that link...

Thank vcmerritt, he did all the hard work

rryanosman said:
Thanks for the interest everyone, I have successfully unbricked my SGH-T959P!!! I finally went with plan '2'.. I bought another one (this solved my urgency issue and got me back into my google account eg: calendar, notes etc. immediately), and it will be returned virtually virgin in a couple days. It was definitely a lot of research, and effort, but I'm extremely happy to have my phone back.
..
-Ryan.
Click to expand...
Click to collapse
Thank you for a great post.
Which file goes to which section in odin?
How did you remove root from a loaner phone?
That was the reason I wanted to flash the phone in the first place.

Related

G Tablet coming tomorrow...would like to get some things set straight. Thanks.

Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Neoprimal said:
Hey all,
I'm getting my G Tablet tomorrow and I'd just like to get some things clarified.
I know, the first thing some will say is USE SEARCH! Well, I did - and that's actually why I just want to get some things straight before I go down the path of modifying the device software. See, reading it all has managed to confuse me more than help me get a definitive instruction set for forging ahead.
I'm seeing the update "****s on CWM" according to a user...and then a 'fix' for that. Than I see that Gapps causes FCs for some, while it works for others. So...yeah, a little back and forth on what to do and who's instructions to follow.
Alright, so first thing's first....Should I flash the Clockwork Mod that I'm seeing available - 0.8? or is there something else I should consider or that I've missed? or maybe wait for a newer version? Should I even flash CWM if I get the newest (and I WILL be getting the newest) S/W version? Are there any downsides at all to flashing CWM on there in terms of messing with OTA updates, etc?
I read this:
"All the ROMS use a standard firmware updater that can be used by non-technical users. Here is an explanation on how it works:...."
Sooo, does that mean I can live without CWM? If an update doesn't work for some reason, will I be able to fix it or overwrite it somehow if I can't get into the tablet at all from the tablet itself? I read something about going into APX mode and putting things on through Windows, is this an infallible method?
Second of all, I read the FAQ thoroughly (I think and hope) but I'm still not 100% on what Gapps to DL or how to put a working Android Market on there especially with this new S/W update. I've seen how to 'fix' the Market to see missing apps, but not how to actually install it on the G Tablet. I may have missed that post somewhere on here.
I'm also unclear if I should get Gapps or not at all, as I've read that some have FCs on there while others do not - so what's the general consensus in light of this update that was just released as of Dec. 21, 2010?
Ultimately, here is what I'd like from my GTab:
I'd like to run the new official Tapn'Tap released recently first and foremost.
I'd like to have the official/unofficial (w/e) Google Market.
I'd like to run Google Apps (Gtalk, Gmail, etc.).
IF I don't like Tapn'Tap, and this is a worse case scenario situation, as in if I HATE TnT - I'd like to have the option to slap something else on there and I'd like to make sure I don't brick my Tablet. Whether that means storing an original official TnT ROM or whatever.
Point me in the right direction please, especially considering things may have changed as of the new S/W update.
Thanks much and sorry for all the questions. I assure you I used search and I attempted to put it together on my own. It's been a long time since I've modded (G1 was the last time) and I don't do it often. Also, apologies if I posted this in the wrong section....I considered posting it in Dev. section but this one seemed better suited.
Thanks again, XDA rocks.
Click to expand...
Click to collapse
I don't know how much direction pointing I can do but here goes..
Clockwork mod in my opinion is a necessity. Version 0.8 is the best one for most people because of how it deals with the memory locations. Yes, you can do things without it. The update process is as simple as putting an update.zip file, and a recovery folder with a command file in it on an sdcard and holding the vol + button while hitting power. It is easy. Clockwork has a lot of little features though that make life easier. You can make a complete system backup with it. You can install updates, and new firmware with it. You can completely lock up your tablet and using clockwork and your backup be back in business in about 3-4 minutes. You can load new roms and if you hate them you can go back to your old working stuff in minutes. Yes, there are ways to make one of these tablets work again when they get stuck. I don't think anyone has actually bricked one. Some may think they have, but I doubt it.
Unless you are dead set on wanting the stock TnT interface the easiest way to get what you want is to load one of the roms. Yes, there are ways to get most of it without loading a new rom. Most everyone that has gone the I have to stay stock but want all the mods has eventually just loaded a rom. TnT3.0 is based on the latest stock stuff. It has the market, flash, etc. already in it. VegaN is what I use mostly but they are both stable and fast.
Before you flash something brand new that just came out I would read about it and see what others have to say about issues. It usually only takes about 30 minutes until you can tell if it is going to be good or not.
All of the roms for this tablet have there own little quirks. The stock has gotten better with each update but it still is not as good as the ones I named.
Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard.
With a little bit of searching almost everything you may want it to do can be done. I really love mine, and when I got it almost 2 months ago I hated it...
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Neoprimal said:
"Finally.. This tablet is very easy to play with. It is pretty much unbrickable. Anything you can possibly break one of us has probably already broken before and fixed. There are some people that seem to have problems doing every little thing. Most don't. So I wouldn't let any of it scare you off because none of it is that hard."
"Sigh" of relief. Then I'm not too worried. As I said I've dabbled in modifying my G1 and it is mostly cake. But I've just been seeing conflicting posts on whether cwm works with the newest official tnt release or not so I wasn't sure what to do.
Thanks for your advice. And when I said pointers, I meant like this as well as pointing me to any posts I may have missed on how to do whatever. Though I THINK I found most of them.
Click to expand...
Click to collapse
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
I can vouch for that. Erased system, boot, data and cache in preparation for a new ROM. Accidentally rebooted and couldn't get into recovery. Booted it into APX mode, flashed stock and was on my way.
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Sprdtyf350 said:
The new release overwrites clockwork. But it is not hard to put back. Always a good idea to copy the clockwork backups folder to your pc, or somewhere they won't be lost. The custom roms typically leave the recovery image alone and can be installed with or without clockwork by either extracting the zip contents for stock recovery, or installing it as is in clockwork.
Click to expand...
Click to collapse
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
hogasswild said:
I would just run ZRoot, then upload the TnTLite 3.0 recovery and update.zip and then do the recovery mode process. You should have a microsd handy just in case it doesn't work, but so far I haven't needed that.
This tablet is much easier to work with and very forgiving since VS never took the time to lock down the bootloader etc like Motorola did with my Droid X. You really shouldn't fear changing files out etc, provided you're getting a ROM from one of the people providing them here. If you can press and hold two buttons at once, you can make your gTab an awesome little tablet. It benchmarks about 1000 points higher than my Droid X on quadrant. Can't wait to see what these guys can do with Gingerbread.
Click to expand...
Click to collapse
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
Thanks for the info Rothnic! I had already flashed it before I figured out it removed Clockwork. Learning new stuff every day is good... Thanks..
dragonfly1113 said:
with the new update however does the z4root still work? i heard it may not anymore. just curious also since im hopefully getting mine on sat for xmas
Click to expand...
Click to collapse
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
hogasswild said:
The very first time I rooted, I used ZRoot and installed 2.4.0. I didn't change anything and used the exact same process of simply copying over the 3.0.0 files over to the root directory of the internal memory and did the recovery procedure (vol+ and pwr keys). It worked like a charm.
Click to expand...
Click to collapse
Ok cool, thanks cant wait for my g tablet hopefully sat morning
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
hogasswild said:
I think you'll like it a lot. I also own an iPad. While they are similar they are also a little different. Merry Christmas!
Click to expand...
Click to collapse
my mom has an ipad and my dad could only buy it while i was on my honeymoon bc he knew i wouldnt approve of an apple device in the house haha.
rothnic said:
It is also not hard to alter the update so that it does not overwrite clockwork.
Open update.zip
Find updater-script, Open in notepad++
Remove the line that references recovery.img
Flash update
Click to expand...
Click to collapse
My device hasn't come yet (damn you FedEx!) but I'm eagerly awaiting it.
My plan:
Unbox, start it....do a factory reset from the getgo if it has enough juice.
Set it back up. Charge it to full. If whatever comes on it is as unbearable as I've seen in on Youtube - start modifications.
Will CWM install on it AFTER I do the update if it's available to me? I've seen that the update messes with it if it's already there - but noone's mentioned putting it on there after the fact. I may just go that route for simplicity sake.
Thanks for this!, and thank you all for chiming in with your experience. I feel much better about just getting my hands dirty in it all. I had wrote something to someone yesterday about jumping in and just doing it, but when it comes to dealing with it yourself it can be a daunting task - especially when it still has that new smell, lol. Anyway, thanks again. You guys really rock.
Will stop back later on after I've done my thing
I think they are both nice devices. There are trade off for both of them. I think the screen on the iPad is wonderful, where the gTab's is okay. But the gTab has a forward facing camera, you can print from it, and you can modify it fairly easily too.
Sprdtyf350 said:
Finally.. This tablet is very easy to play with. It is pretty much unbrickable.
Click to expand...
Click to collapse
...famous last words...
Seriously though...trust the directions from the great devs like roebeet. Follow their instructions word for word. You can switch ROMs and then flash back if you want. No worries...
Off topic!
Well...disappointment! Fedex had my package out for delivery at 8am and at 8pm, they're not here. This is why I like UPS, they show up at my door on the day of delivery, no exceptions - they have shown up at almost 9pm before. The Archos 101 I got was sent out at 8am as well but got here at 1:30pm - I suppose that was before the holiday rush.
Checking the details of my tracking I'm seeing a "delivery exception" at 7:30pm (I guess it was time to get back to the facility so they can clock out by 8pm?) and upon calling them I get a somewhat stumbling but polite CS who tells me the delivery went out "late" - upon which I asked if 8am was considered late, especially from a distribution facility WITHIN the same zip code as I am, and all he could say was "Very sorry about this".
Aaaanyway....I guess it will be tomorrow before I can report my adventures.
Think I'll be able to get my $3.99 back from Amazon? I have Prime and with that the package would have come tomorrow anyway. Basically my $3.99 is wasted. Imagine if I didn't have Prime though? Whew.
ima_UNC_fan said:
...famous last words...
Click to expand...
Click to collapse
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
I finally got the G tablet tonight and...alright, don't flame me for this - but I don't see what all the complaints about the screen being horrendous or the device being molasses slow are about?
I don't know how people are trying to view it...but when looking at it or setting it on a stand to watch media, I'm not seeing any problem with the viewing angles. It's about the same as my laptop so I watch it the same way.
It's not even a 1/4 as slow as the stuff I've seen on Youtube or in some of the review videos I've seen around the net. I haven't gotten a single FC. Granted, I haven't put in a SD Card yet so maybe problems will start then?
I guess I should note, the very first thing I did was did a factory reset. Then I hooked it up to Wifi and got the 3053 update. I'm one of those who will be waiting for the 'official' update on the 24th.
I set up the time and date, restarted and everything works. I haven't installed flash yet (don't need it that much) and stuff that I DO want on there right now works fine (skype, pandora, fring, dropbox, evernote). I'm slowly figuring out a list of what I want/need from my Mytouch 4G to port to the VS GTab. Figure I don't really NEED Gtalk, Gmail on there because I have these on my phone AND PC - do I really want them making noises all around my home on 3 devices? I was concerned about getting the Google Apps on but now I'm finding I really don't need them. So it seems to me this will be a matter of learning to separate what I need on a tablet vs. my phone - I was of the mentality that I should just get whatever's on my phone on the tablet, this is something others apparently do as they seem to want everything that's on their phone, on their tablets as well.
I personally don't see the point in that. Had I had the Google Market, that would have escaped me as I'd have used Appbrain to just get my motherload of apps from the MT4G to the GTab. Not having it has slowed me, and now I get to re-evaluate before I do grab apps for it.
Now I just have to merge/convert my HTPC into a NAS device as well and find an app that will allow me to DLNA stream media from it and I'll be in mobile heaven.
I haven't had my wifi drop at all anywhere in my home and I've marched all over with it (I use full Wifi N, no G compat. so maybe my range is wider?). Tried email, etc. to replicate crashes and force closes but haven't so far. No surfing issues. I DID find that one app got 'stuck' being downloaded and I had to delete the file before the 'downloading' icon would go away, even after restart.
Maybe the trick to getting a workable GTab in the first place is to factory reset it before first use? Iunno. Things may change and issues may pop up the more I use it and as time passes - but so far, so good!
Again, I can't thank XDA enough for the advice and info. I've found and been given.
Sprdtyf350 said:
If you can figure out how to brick it you will probably get an award.. It won't be a good award but probably one of those top ten dumb things people do awards. So far unless you plug the motherboard into a wall socket no one has bricked one. May think they have, but like I said before I doubt it..
And your right.. If it can be done, someone eventually will figure out how. And then we will all laugh at them.. At least I will
Click to expand...
Click to collapse
I figured it out. Accidentally hit one of the devkit nvflash .cabs and boom

[HELP] What do I do now? Captivate dead.

Yessss another dead captivate thread.
I think I'm gonna go die now.
I followed the video guide to install a custom ROM, in the development thread to the letter, and now my phone wont even turn on... (now that im thinking about it, I think I may have left the debugging mode OFF before I went to flash back to stock, maybe thats why?)
I got into download mode, plugged the phone into odin3 JF6 one click, it started and at some point during the process it said "removed" even though I didnt touch anything, and then i got a weird msg saying my device is not recognized, keep in mind the drivers were installed properly, and I had everything double checked before i flashed....
wtf do I do now? Cant boot at all or go back into download mode. this is my third galaxy, got it two days ago ffs.
My only 2 suggestions. Go to the Dev section and in the guides there is a method to make a USB Jig without solder or anything. You're out like $1 if it doesn't work.
Also, what rev is your phone? There's been some threads started saying the newer Rev phones, maybe 1010 and up crap out using normal One-click. Do check your rev level under the battery and do a search of the forums. I know I have seen the threads.
good luck.
1 reboot pc
2 use different usb ports (direct to motherboard)
3 open odin first as administrator
Sent from my GT-I9000 using XDA App
bobbylx said:
My only 2 suggestions. Go to the Dev section and in the guides there is a method to make a USB Jig without solder or anything. You're out like $1 if it doesn't work.
Also, what rev is your phone? There's been some threads started saying the newer Rev phones, maybe 1010 and up crap out using normal One-click. Do check your rev level under the battery and do a search of the forums. I know I have seen the threads.
good luck.
Click to expand...
Click to collapse
I'm not sure if I was looking at the right place, but I think its 10.12. I'll do a search and see what comes up, thanks for your help.
JayPhill89 said:
1 reboot pc
2 use different usb ports (direct to motherboard)
3 open odin first as administrator
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I'll try that, thanks.
Open Odin first then,
1. Remove your battery for 30 seconds, remove external SD card and SIM card
2. Reinsert battery.
3. Hold down both volume buttons and while holding them down plug the phone in.
It should get into download mode then. I bricked my phone and it wouldn't boot up at all and this worked for me.
On a side note, I have not had much luck flashing or doing much of anything on Windows 7 64 bit. I would suggest trying it on an XP machine if you have access to one.
G.Hook said:
Open Odin first then,
1. Remove your battery for 30 seconds, remove external SD card and SIM card
2. Reinsert battery.
3. Hold down both volume buttons and while holding them down plug the phone in.
It should get into download mode then. I bricked my phone and it wouldn't boot up at all and this worked for me.
On a side note, I have not had much luck flashing or doing much of anything on Windows 7 64 bit. I would suggest trying it on an XP machine if you have access to one.
Click to expand...
Click to collapse
I've tried every possible key combination out there and nothing works. I think my best bet is a Jig, unfortunately the source didnt have any transistors in stock so im SOL for now.
Use JIG ... It will be your last help.
Use it as a paper weight.
If you look up samsung captivate jig on ebay you will find some pre built. I bought one not long ago just to have and it works just fine.
I hope this helps. Best of luck to you.
Sent from my GT-I9000 using XDA App
Sounds like you are a victim of the one size odin fits all debacle. You will indeed need a jig to recover and then you must use odin to flash jh2 or later firmware to your phone. Unfortunately, most guides still direct people to flash jf6 even though your situation comes up on a regular basis.
Check out this link for a jig. And there is a video to show you how to build one. Or mobiletechvideo guy sells them for 17 bucks.
http://forum.xda-developers.com/showthread.php?t=889128&highlight=usb+jig
Sent from my SGH-I897 using XDA App
newter55 said:
Sounds like you are a victim of the one size odin fits all debacle. You will indeed need a jig to recover and then you must use odin to flash jh2 or later firmware to your phone. Unfortunately, most guides still direct people to flash jf6 even though your situation comes up on a regular basis.
Click to expand...
Click to collapse
It seems to me like there's consistent irregularities with the entire process, its not uniform at all, which is very frustrating, every one faces different problems, and the solution is never the same.
Anyways, I went out and bought 3 resistors, turns out they were the wrong ones, I found out the colors werent the same of what I needed, but then that just goes to show you how difficult it is, its partly my fault i got the wrong ones, but someone like me who doesnt know much about hardware hacking, walks into an electronic store, faced with several options, is some times lost.
Oh well, I could've fixed it, had I got the right resistors, but then again, who was going to guarantee I wasn't going to kill it again, for the exact same reason I mentioned in the first post, because I need to consider a few things here, first and foremost, that I have a rogers branded device, and these are the ATT forums.
I called rogers and a replacement has been placed, I should be getting it by friday, or tomorrow if im lucky, with whatever comfort that brings, I still have several concerns, and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.
rsnt said:
It seems to me like there's consistent irregularities with the entire process, its not uniform at all, which is very frustrating, every one faces different problems, and the solution is never the same.
Anyways, I went out and bought 3 resistors, turns out they were the wrong ones, I found out the colors werent the same of what I needed, but then that just goes to show you how difficult it is, its partly my fault i got the wrong ones, but someone like me who doesnt know much about hardware hacking, walks into an electronic store, faced with several options, is some times lost.
Oh well, I could've fixed it, had I got the right resistors, but then again, who was going to guarantee I wasn't going to kill it again, for the exact same reason I mentioned in the first post, because I need to consider a few things here, first and foremost, that I have a rogers branded device, and these are the ATT forums.
I called rogers and a replacement has been placed, I should be getting it by friday, or tomorrow if im lucky, with whatever comfort that brings, I still have several concerns, and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.
Click to expand...
Click to collapse
My first captivate went fubar within my 30 days and I damaged the nv_data.bin on my second captivate and was stuck with the test IMEI. Samsung fixed my second one for free. Now I'm at the point where I'm totally sure about what precautions I need to take to keep me out of trouble but I'm not sure if I want to risk it again, heh.
The cheap jig does work. It helped me when I accidentally unplugged my phone during an odin flash.
Yes, you make a good point. You will find that most of the guides are written by people like myself who have an early revision or a phone from the initial release. For most of us, from what I've read and experienced, our phones are really hard to brick, ie, button recovery always works, odin one-click works, etc.
I honestly don't know all the differences now between revs. The first hiccup was the phones missing button recovery/download, and now it seems that people are having issues using the Odin One-click that we have been using for months.
I would recommend with your next phone check the rev or manufacture date, then search the forums for people with similar or same revs that have been successful at flashing and find out what they did.
good luck
@bobby
I wasnt trying to diminish the help that the guides provide. The work that went into creating them is certainly appreciated. The problem arises when so many people just tell newcomers to flash with x version of odin without considering the changes that have occured in the newer builds.
Sent from my Liquid Metal using XDA App
newter55 said:
@bobby
I wasnt trying to diminish the help that the guides provide. The work that went into creating them is certainly appreciated. The problem arises when so many people just tell newcomers to flash with x version of odin without considering the changes that have occured in the newer builds.
Sent from my Liquid Metal using XDA App
Click to expand...
Click to collapse
I agree with you completely. I tend to take it for granted that button recovery works for me and that good old odin one-click does too. It seems we need to start collecting data and making new guides.
Something like,
If you have rev, 1006, 1007,1008 go here,
If you have rev 1009 to 1012 go here,
etc.
latest update,
Two cables, and six resistors later, my phone won't go into download mode, lol, I'm not even sure I did things right, I'm gonna try stripping the same cable, used in one of those videos on how to make a jig, I still have three extra resistors.
I'm starting to think its because of it being with rogers. im gonna search the forums.
A micro usb breakout board is the simplest method for constructing a jig.
Wow, I guess I'm lucky that the used Captivate I picked up for my gf is an older one at 1007. Root procedure for her went without a hitch.
From stock rom, all set up and in daily use, WITHOUT ROOTING first.
Put clockwork update.zip on her sdcard.
Reboot into recovery.
Reinstall packages twice to get into clockwork recovery.
Wipe data/factory reset.
Flash Cognition.
Profit.
She's been using it this way for two weeks and loves it so much more than stock.
What was so complicated about the procedure you followed? Or was it the same as this but it just didn't work?
rsnt said:
...and now that I've basically rendered 3 devices to "almost" none-working condition (this one being an exception because I can "possibly" fix it) I'm not even sure how far I want to go.
Click to expand...
Click to collapse
I think you may have a good point. Eventually your carrier will stop replacing bricks for you. If you still have the inclination to play with flashing, investing in a jig would definately be a wise investment and if I were in your shoes, I wouldn't flash anything without one. I made a jig for myself before I ever flashed anything but luckily I have never had to use it, probably because I took the time (about a month and a half of trolling around here reading.) to research what all was involved with what I was about to jump into. Just something to consider in case you want to try again. Good luck!

[Q] I need help.

Today, I acquired a infuse 4g, off contract. I wanted to mess around with android, as my current phone is an iphone, and maybe switch over.
One of the first things I tried to do was tether my iphone to my infuse using mywi. I soon discovered android doesn't work with ad hoc networks. I googled a couple fixes, and decided to try my hand. I have never touched android before. I found this thing that said I could. So I went for it. After reading a few guides, I decided the first step was to root it using superoneclick. That went fine. Then, I read the instructions and it told me to 'flash the zip file using a recovery rom' which was total gibberish to me. So I did some more googling and found a modified 3e recovery thing for the infuse. I used some file system app to put that where it was supposed to be, but then saw that I needed clockworkmod to be able to flash things. By this point I realized I was far, far over my head, but stupidly pressed on. At about the same time, I also extracted the zip file from exop.pro, and replaced the wpa file that existed already in system/bin with the one from the zip. I also booted into recovery mode, and tried to install clockwork mod, which failed even though as far as I can see. Now, when I turn my phone on, everything is ok except that it can't scan for wifi. I assume this is because I ****ed with the wifi file. I've basically decided to give up at this point, so please, just tell me how to made it work again and I'll promise to not **** with it anymore. Also, I neglected to make a backup. Stupid, but I didn't know how and didn't want to go through another huge thing.
tl;dr
I tried to make it so I could connect to ad hoc networks on my infuse 4g and ended up destroying my wda_supplicant file in system/bin (i think) and
Google the original file you replaced, ' wpa supplicant file download for infuse 4g'. Next time save a copy or backup of whatever your doing.
Thanks, but I really have no idea what is what. Could you link me the right one? I'm sorry that I'm so useless.
Itaer said:
Thanks, but I really have no idea what is what. Could you link me the right one? I'm sorry that I'm so useless.
Click to expand...
Click to collapse
this was your problem the first time... you need to read and study before you just start flashing things to your phone man. haha... us linking you somewhere will not help you figure that part out... and its an important part of tinkering with these phones in the way you are trying to.
rid yourself of the apple mentality where everything is spoon fed.
moving on, however, do what the guy previous to me said... find that file you downloaded. and do some reading, watch some instructional videos, focus on just rooting the phone properly for now. do that, then read, watch, ask questions like you are doing when you need to, then proceed.
read comments and stuff in forums about the ROMs you are flashing, what kind of problems do they have, what recovery is recommended for that particular ROM, stuff like that. just READ everything and anything you can about what you are doing....
the company that made your newly found OS has a nice little search engine called google... and it works pretty well if you know how to use it i'll keep an eye on this thread for you as others are probably doing so we can provide you with whatever answers you might need. good luck!
a good rule of thumb when flashing hax0red software to these phones is when something ****s up, 9/10 times it's just a little tiny thing you missed or did during the install yourself... so back to square one, and pay close attention to detail. these phones can be a little touchy when flashing ROMs if you are not doing it exactly they way it is recommended.
perfect example of this: when i had my samsung moment... when i converted from 2.1 OS to 2.2... for some odd reason i would ALWAYS have to flash a little script zip to wipe the 2.1 data from the device before flashing the 2.2 zipped ROM to the phone... the 2.2 ROM was supposed to do this and take care of it completely for me, but even though it did, the only way it would work properly every time i was going from 2.1 to 2.2 was to flash that zip beforehand...
hope that long rant provided some useful insight
Thanks.
But I have read the instructions on the stuff I'm trying to do, several times, and like I said, I'm more confused that I was at first.
I'm just not willing to break it any further.
So basically what I'm wondering now is, how do I put everything back to how it should be. Is there a way? Like, is there a way to load the original software back? I don't think restoring it to factory settings would fix what I did, but tell me if I'm wrong.
I just want everything back to normal.
Please.
Edit: I know it seems like I'm not doing anything to help myself, but I have a lot on my plate in life right now, and I also have absolutely no idea where to even start. Half of the terms you use mean nothing to me, and I'm just so overwhelmed.
I just want to know if there is some way to put it back to how it came out of the box.
Turns out that once the new wda_supplicant thing is ACTUALLY GRANTED PERMISSION TO EXECUTE, that everything works fine. Thanks guys
see... Knew you would figure it out man
Sent from my EVO3D using XDA App

Mobile Odin

There isn't a thread for this for our phone, so I thought I would make one seeing as i've tried it. A program called mobile odin https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro&feature=nav_result Will allow you to run odin from your device without connecting it to your computer. Its super simple to use and it works pretty well. My charging port is hosed so I can't connect it anyways. I was on ICS and needed to go back to GB. Had to use this app and got back on GB no problem. I don't see a free version of the app anywhere so depending on how much you use odin, 5 bucks might be a good investment.
Hmm I ran the program and sent the logs a few months ago and never heard anything back to get our device supported and still doesn't say it supports this device.
It takes 30 minutes to run the system dump to find out our device isn't compatible......after running the dump....and to find out it wouldn't work
Its not worth the hassle when you've only got 15 minutes to get the refund.
I'd like to see screenshots or something to show that this actually does officially work on our device ....considering its not on the list of compatible devices.
Thanks
I guess after 2 days without a response ....there's not going to be one?
To bad I was hoping that it was going to be worth the money
Too bad I'm stuck on ics as well got excited when I started reading this thread.
Sent from my SGH-T959V using xda app-developers app
??? Anything???
Or is this just a bogus post....and in the wrong section....should have went in themes and apps
A search would show that XDA members gets a lite version as with lots of other apps for free.
http://forum.xda-developers.com/showthread.php?t=1347899
Ive run it.....it generates a dump file (mobileodin.txt) that you send in and hope that he incorperates your device in the next update .....and since it does this ...it basically is not suported as of yet.
So the op is saying it works.....but in fact it doesnt.
I would like to see some evidence that it works for him and like to know how it does on his device and not on mine.
Also with the lite version you have to dl a flash kernal specific to your device from that same thread....but since our device is not suported...you wont find one.
Y'all should do alot more reading before posting links to something that doesnt suport our device.
i did read that thread thuroughly....very thuroughly,even flashed a few flash kernals he added that were for the other models similar to ours in great hopes of getting this to work.
This is what you get....it does take about 30 minutes to generate the text file to send in
Oh magda623....are you there?
we are awaiting your reply.
Im sure there is hundreds of us that would like to have this running on our phones...please let us know how to make it work.
Ok ok i give up on magda to humor us on how it works on his device.
I urge everyone to use the link a couple posts up and dl the mobile odin lite,run it and send your mobileodin.txt to chainfire and plead with him to include our device....im sure he will eventually get our message.....after all he does say he is only working on samsung devices at this time.
****wouldnt it be awsome to flash back and forth from mtd to bml roms without ever having hook up to your comp!!!****
Lol am i seriously the only one that finds this to be something that would make life amazing on the sgs4g?
new ealsjur
Mobile ODIN did not recognize the device when I was on CM9
Something about flashing the phone from the phones makes me uneasy. What if you need to repartition using a pit or something, while the phone is on and in use.
Btw short I sent a dump file a long time ago and have been retrying ever since with no luck so far, maybe I'll make another dump today after work
Sent from my SGH-T959V using Tapatalk 2
getochkn said:
Something about flashing the phone from the phones makes me uneasy...
Click to expand...
Click to collapse
I've stayed out of this one for just that reason. It's bad enough to be messing with the underpinnings of an OS when you don't have true single-user mode, a "safe" boot, kernel, and emergency filesystem available, nor alternate boot media if things go really bad. Doing all that from user-land while the system is running all services sounds like just asking for trouble.
You can do most of what you are asking for in Recovery
Flash kernel/boot/recovery
Flash /system
Flash other run-time partitions
Flash modem
If you can't get into recovery, are you really able to run some Android program?
I'm not really seeing the need for this, except for people who have broken their USB connector and can't connect to a computer. Even then, when would you need ODIN? When things are so hozed up you need to start from scratch, yes, but if you have a broken USB, what are you doing flashing risky things?
If someone can show what this would do that you can't do in recovery, as well as a meaningful use case for it, I'll mull over how to do it. Basically, if an app can do it, a script in recovery sure should be able to as well.
I tend to think the reason we dont have support is because of the quirkiness of this phone.
I agree eollie ....I gave up on this a while ago...really it doesn't matter to me anyhow....I mostly thought it was a great idea.
I don't tend to have issues with flashing...or recovering.
And even if I did....I wouldn't be dumb enough to post here lmao.

My device was destroyed by something that I flashed here on the threads.

I can't say when it happed. Evidently, it has been on my phone for a long time. I can remember seeing some of this funny crap months ago when I first rooted my phone. One of the mods here has a surfaceflinger hack that will take over your entire system. Your accounts will get hacked. First it was my Google drive. There was a zip file in there that I did not place. It said it was a Metro PCS Note5 zip. It was shared to my drive by someone else, and I could not remove it. So any time I did a factory reset and logged into my Google account, it would be loaded onto my phone. I finally got that cleaned up, but they had moved to my OneDrive storage with the same thing under a different file name. This hack is so smooth, that your phone won't even hesitate. It is disguised as Android OS, but if you check the battery stats, it says surfaceflinger. It is located in your data partition. It is a add on script, and it will eventually infect about 20 more apps with add on scripts. It will load up tons of /data/data along with a recovery from boot script, and..... I just discovered a little too late that there is a script that will destroy your device if you remove it the wrong way. I think the name of it is sec_device_destroy but I can't be sure. I saw the code in a system log file, but I do not know what it is yet. I am 100% positive that some of you have the same problem, you just don't know it. I'm gonna start taking apart every singe file in the development threads until I find it. As for now.... My device is stuck in a infinite bootloop. It won't recover from ODIN, and I have a new LED llight that is white. I can answer any questions and provide screenshots, and system logs if anyone wants to help uncover this beast. It is super legit. Best Android hack I've ever seen. It does every thing. Who is gonna help me locate this b.s? My Note 5 is useless now. Somebody here has it, I assure you, and when you discover it, you should ask for help. If you don't remove every bit of it, the device will not boot again. I'm gonna keep playing with mine, but I'm pretty sure it is toast. ( EDIT---> I was able to get to boot again by flashing TWRP and using the wipe option to repair each partition. I had to change them to exFAT then back to EXT4 to get them to mount.)
Sounds like my boot loop of death. Where everything was Odin flashed and still wouldnt load. Quick question when you were on Odin did you select the band erase all option? And do you still have acesss to recovery? Was all this weird stuff going on when you firmware was load? Did anything strange happen while in recovery? And why didn't u send it back to sprint)
---------- Post added at 10:22 PM ---------- Previous post was at 10:19 PM ----------
If I was in your shoes I would select the band erase all and repartition option. Re download stock firmware from sammobile, go back to Odin to root and add twrp, select the erase button again to flash moar ROM and see what happens. If it's a hack like u said then I'd use my insurance
The potential for having your personal security and financial disaster that something like this could cause is why i stopped rooting.
Rumning other none store apps is like letting a guy you dont know come over and say "hey, i have these cool mods i can do to your car's brakes! I take out a few parts, replace others with parts I made in my garage, and load my own software into your anti-lock brake system".
Sent from my SM-N920P using Tapatalk
You can't blame no one if your phone gets fried or blown up, you take the risk at your own discretion . No one force you to flash anything. To avoid any problems don't flash anything your not sure what's going to happen. If i see someone post a s7 edge port, I'm not gonna flash it until i get some good feedback or take one for the team and hope it don't destroy my phone. Goodluck fixing your phone don't seem like it's too hard to fix depending your experience . I would help but it's too time consuming helping fix a phone i can't even see or test out.
Sent from my SM-N920P using XDA-Developers mobile app
I'm really sorry that this happened to you. But @bonebeatz1234 is right. There is a disclaimer at the beginning of every rom, feature add-on, theme, kernel, etc. The whole point of Q&A & replys are so you can find out if something is "okay" to flash. There are so many known developers that have built stuff for so many devices. Its rare to find something on XDA that is "unsafe." I can't even remember ever finding anything that is "unsafe" or nearly as bad as you are describing. Especially for the Sprint Note 5. I'm assuming you have a SM-N920P do to the fact that you're posting it here. There have only been a few roms for this device & maybe a couple handfuls of add-ons. The one or two things I've seen that have caused problems with this device, they were removed with-in a few hours. You weren't very clear on where you got this hack at all. Are you saying it was something you downloaded from one of the Sprint Galaxy Note 5 threads? You are a Senior Member. So, I'm assuming you know what you are talking about. I believe that it is very possible you did get it from some place on here. But, in order for me to believe that, I have to also believe that it is just as possible that it could have came form anywhere else on the web via public WiFi connection, email, file download, text message, USB connection or at least 100 other ways. @DAvid_B made a point about the risk of rooting your device. Although the risk can go up for threats. The same rules apply for rooted device as they do for non-rooted devices. BE CAREFUL! Use software to protect yourself, read reviews, don't be the guinea pig. If you are like me & are addicted to putting yourself at some (if even the smallest) amount of risk, HAVE INSURANCE! Most if not all people have to agree that it's worth the $11 a months & $200 deductible to have as much fun as we all do. Its a hobby. People spend more money on model airplanes, playing golf & hunting. I haven't had to file a claim in over 6 years. I say all that to say this... Anyone that see's this thread & decides its too much of a risk to root, I promise you, IT ISN'T! The advantages out way the risk by about a 1000! The members of XDA are here to help with any issues you may have. There are VERY FEW things that are UNFIX-ABLE! And when I say "very few" I mean little to non! When I say little to non, I mean NONE! AT ALL! Even the problem he described IS FIXABLE! Like he stated, ask for help. @Sleepycloud, I pray you get this resolved. Even if you have to Odin back to stock & backup/wipe your Google Drive & OneDrive account, I know you can fix this. Please don't think that I meant any disrespect for posting this. I just want people to know this is extremely rare & only a one in a million chance it could happen.
Sleepycloud said:
I can't say when it happed. Evidently, it has been on my phone for a long time. I can remember seeing some of this funny crap months ago when I first rooted my phone. One of the mods here has a surfaceflinger hack that will take over your entire system. Your accounts will get hacked. First it was my Google drive. There was a zip file in there that I did not place. It said it was a Metro PCS Note5 zip. It was shared to my drive by someone else, and I could not remove it. So any time I did a factory reset and logged into my Google account, it would be loaded onto my phone. I finally got that cleaned up, but they had moved to my OneDrive storage with the same thing under a different file name. This hack is so smooth, that your phone won't even hesitate. It is disguised as Android OS, but if you check the battery stats, it says surfaceflinger. It is located in your data partition. It is a add on script, and it will eventually infect about 20 more apps with add on scripts. It will load up tons of /data/data along with a recovery from boot script, and..... I just discovered a little too late that there is a script that will destroy your device if you remove it the wrong way. I think the name of it is sec_device_destroy but I can't be sure. I saw the code in a system log file, but I do not know what it is yet. I am 100% positive that some of you have the same problem, you just don't know it. I'm gonna start taking apart every singe file in the development threads until I find it. As for now.... My device is stuck in a infinite bootloop. It won't recover from ODIN, and I have a new LED llight that is white. I can answer any questions and provide screenshots, and system logs if anyone wants to help uncover this beast. It is super legit. Best Android hack I've ever seen. It does every thing. Who is gonna help me locate this b.s? My Note 5 is useless now. Somebody here has it, I assure you, and when you discover it, you should ask for help. If you don't remove every bit of it, the device will not boot again. I'm gonna keep playing with mine, but I'm pretty sure it is toast.
Click to expand...
Click to collapse
If you are willing to send me the phone, I could probably fix it for you and send it back. I know it's hard to trust people these days so it's totally up to you.
bonebeatz1234 said:
You can't blame no one if your phone gets fried or blown up, you take the risk at your own discretion . No one force you to flash anything. To avoid any problems don't flash anything your not sure what's going to happen. If i see someone post a s7 edge port, I'm not gonna flash it until i get some good feedback or take one for the team and hope it don't destroy my phone. Goodluck fixing your phone don't seem like it's too hard to fix depending your experience . I would help but it's too time consuming helping fix a phone i can't even see or test out.
Sent from my SM-N920P using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm not mad. Lol Not at all. I am a true geek to the heart. This is fun stuff to me. You learn more when you are challenged beyond your current skillset. I'm just putting everybody up to the fact that there is something malicious here in the threads. I have a strong feeling of where it came from. I already to apart the "Stock" .tar and found 3 extra files in it. A param.bin file, a carrier .img and a PIT file. I am one hundred percent sure that when I take that PIT file apart later that I will be able to confirm my suspicions. According to the thread here by @tdunham in this thread; http://forum.xda-developers.com/spr...sprint-galaxy-note-5-sm-n920p-partition-There are 19 partitions. I believe that I have 24 or 25. I'll have to get back with y'all on this one. Can anybody confirm that this partition table is still viable for Marshmallow? I'll post screenshots in about an hour or two for everyone to examine. I would love some help on this. I have never removed partitions before and my knowledge on how to go about it is limited. I'm reading, but most of it is unrelated garbage. If anyone has a link that will help me educate myself and remove these partitions, I would be super thankful.
MrMike2182 said:
If you are willing to send me the phone, I could probably fix it for you and send it back. I know it's hard to trust people these days so it's totally up to you.
Click to expand...
Click to collapse
That is pretty awesome of you bro. I am pretty sure I have correctly identified the problem. I have 4 or 5 extra partitions. This is why it keeps coming back, and that is why ODIN and Smart Swithc does not fix it. They are only going to see the 19 partitions they are supposed to see and they will not even look anywhere else. I bought a root partition app on Google Play for $9.99 and that is how I saw the extra partitions. This has been on my phone for a long time. A very long time. Like 6 months, but I never knew it. I can remember seeing about 5 USB folders that I could not open. They are labeled as external usb storage. I'll post screen shots later. So now that I know what the problem is, I see a bright side coming soon. lol
Sleepycloud said:
That is pretty awesome of you bro. I am pretty sure I have correctly identified the problem. I have 4 or 5 extra partitions. This is why it keeps coming back, and that is why ODIN and Smart Swithc does not fix it. They are only going to see the 19 partitions they are supposed to see and they will not even look anywhere else. I bought a root partition app on Google Play for $9.99 and that is how I saw the extra partitions. This has been on my phone for a long time. A very long time. Like 6 months, but I never knew it. I can remember seeing about 5 USB folders that I could not open. They are labeled as external usb storage. I'll post screen shots later. So now that I know what the problem is, I see a bright side coming soon. lol
Click to expand...
Click to collapse
Some times when a Samsung device gets bricked you need whats called a PIT that can reflash the partitions. It's on here somewhere or I have one.
MrMike2182 said:
Some times when a Samsung device gets bricked you need whats called a PIT that can reflash the partitions. It's on here somewhere or I have one.
Click to expand...
Click to collapse
I have one. It doesnt work because a PIT file will only reset the factory image partitions. When there are additional partitions, it does not touch them. I have one extended partition after boot. Everything gets rearranged under /sys/dev/block/8:0 have you ever heard of that? Me neither. Lol I need to disect this and remove the script after a fresh flash before the first boot. Something tells me that it would be easier to deal with then. Ill post some pics from my computer here in a bit. I dont have the option on my phone
Here are some pics of the new extended partition and the logical partitions within.
Sleepycloud said:
I have one. It doesnt work because a PIT file will only reset the factory image partitions. When there are additional partitions, it does not touch them. Inhave one extended partition after boot. Everything gets rearranged under /sys/dev/block/8:0 have you ever heard of that? Me neither. Lol I need to disect b this and remove the script after a fresh flash before the firsy boot. Something tells me that it would be easier to deal with then. Ill post some pics from my computer here in a bit. I dont have the option on my phone
Click to expand...
Click to collapse
I've seen some pretty crazy partition set ups the HTC Desire for instance has over 20 partitions and all of them have close to 200MB of free space on them that you can't even use! Talk about a waste of space lol.. But /sys/dev/block/8:0?!?! The fuuu... What kind of partition is that?!
Damn, your phones using almost all the ram/memory that you have.. Are you running a lot of apps or something else that's memory intensive?
So now the million dollar question is..... What is it gonna take to remove this b.s. from my phone. Removing the folders does not work. They get reinstalled upon every boot. I need to find the script(s) and where they are hidden, and delete them, then remove the partitions form the logical folder. I am tempted to just wipe the logical partition it its entirety then create a whole new partition table based on my unrooted Note 5. However, I am going to wait until I get some solid feedback from one of y'all. Who has an idea of what I need to do here. Repartitioning with a PIT file does not work. IT does not touch these extra partitions. I think they are labeled, sdb, sdc, and sdd.
I'm just gonna go ahead and let the world know who the piece of crap is. Here... go take a look for yourself. Download the "stock" tar and extract it, then extract the .tar itself. You'll find the extra files there. It contains a param.bin file, a carrier.img, and a modified PIT file that will give you the crap on my phone. If I could be my hands on this dude, I would choke him until he was purple. This has been a major pain in my ass for over 3 months now. My accounts were hacked, all of them, files were deleted, and I had no privacy what so ever. Here... This is where it came from. http://forum.xda-developers.com/note5/general/project-noble-firmware-pit-file-galaxy-t3179529
Sleepycloud said:
So now the million dollar question is..... What is it gonna take to remove this b.s. from my phone. Removing the folders does not work. They get reinstalled upon every boot. I need to find the script(s) and where they are hidden, and delete them, then remove the partitions form the logical folder. I am tempted to just wipe the logical partition it its entirety then create a whole new partition table based on my unrooted Note 5. However, I am going to wait until I get some solid feedback from one of y'all. Who has an idea of what I need to do here. Repartitioning with a PIT file does not work. IT does not touch these extra partitions. I think they are labeled, sdb, sdc, and sdd.
Click to expand...
Click to collapse
Deleting them is not going to work no matter which way you remove them they'll come right back after a reboot and the only way to stop that from happening is to flash a custom kernel/boot that's got write protection off. If you don't have that they just keep coming back no matter what.. All the apps are usually always in these 2 places /system/apps and /system/priv-apps
---------- Post added at 11:00 AM ---------- Previous post was at 10:55 AM ----------
Sleepycloud said:
I'm just gonna go ahead and let the world know who the piece of crap is. Here... go take a look for yourself. Download the "stock" tar and extract it, then extract the .tar itself. You'll find the extra files there. It contains a param.bin file, a carrier.img, and a modified PIT file that will give you the crap on my phone. If I could be my hands on this dude, I would choke him until he was purple. This has been a major pain in my ass for over 3 months now. My accounts were hacked, all of them, files were deleted, and I had no privacy what so ever. Here... This is where it came from. http://forum.xda-developers.com/note5/general/project-noble-firmware-pit-file-galaxy-t3179529
Click to expand...
Click to collapse
I'd report this to one of the moderators if I was you so they can check it out and remove it if it's harmful to people's devices I don't think xda would be happy hosting that type of ****!
MrMike2182 said:
Deleting them is not going to work no matter which way you remove them they'll come right back after a reboot and the only way to stop that from happening is to flash a custom kernel/boot that's got write protection off. If you don't have that they just keep coming back no matter what.. All the apps are usually always in these 2 places /system/apps and /system/priv-apps
Click to expand...
Click to collapse
I hava already tried that. These are add on scripts. They work on any kernel. I have to delete the partions themselves but I'm not exactly sure which ones or how to do it without bricking my phone. I'm gonna move slow on this one until I am sure that II have the right solution. I'm certain it is the sda, sdb, sdc, and sdd partitions that need to be deleted. First I need to know if this partition table is still valid for Marshmallow. http://forum.xda-developers.com/note5/general/sprint-galaxy-note-5-sm-n920p-partition-t3190326 Once I know that, I can proceed. Is this PIT still the same in marshmallow?
Sleepycloud said:
I hava already tried that. These are add on scripts. They work on any kernel. I have to delete the partions themselves but I'm not exactly sure which ones or how to do it without bricking my phone. I'm gonna move slow on this one until I am sure that II have the right solution. I'm certain it is the sda, sdb, sdc, and sdd partitions that need to be deleted. First I need to know if this partition table is still valid for Marshmallow. http://forum.xda-developers.com/note5/general/sprint-galaxy-note-5-sm-n920p-partition-t3190326 Once I know that, I can proceed. Is this PIT still the same in marshmallow?
Click to expand...
Click to collapse
Yeah that PIT is fine but if I were you I'd try to flash a different kernel because I had the same problems with apps returning after a reboot and the only way to stop that from happening again was to flash the custom kernel. That stopped them from coming back. <----This was on an HTC device so maybe Samsung is different?
This b.s. has my ADB disabled somehow. Even when I open the IOT Menu and switch from MTP to MTP+ADB it still does not work. It does work upon a fresh flash if I let the stock recovery update the system image then immediately go back into download mode before it boots up. After that, I have no ADB capabilities. Would that be a build.prop issue?
So was my advice useless oo?
djhulk2 said:
So was my advice useless oo?
Click to expand...
Click to collapse
No. It was pretty good, but I already have a good Note 5. I'm trying to learn more about Android bro. I wanna fix this one, not replace it. Give me some more solid ideas!!! I'm open to suggestion. Thank you.

Categories

Resources