Database Info

[Q] EP1W

I am running de-bloated EP1W on droid charge, and i was wondering if i can install CWM recovery onto the phone with this 2.3.4
cause i tried earlier today, and i thought i bricked my phone, but after 1 hour of trying, i was able to install fresh copy of ep1w.
i tried to install CWM with odin 1.82
any suggestions how to make this happen?

[email protected] said:
I am running de-bloated EP1W on droid charge, and i was wondering if i can install CWM recovery onto the phone with this 2.3.4
cause i tried earlier today, and i thought i bricked my phone, but after 1 hour of trying, i was able to install fresh copy of ep1w.
i tried to install CWM with odin 1.82
any suggestions how to make this happen?
Click to expand...
Click to collapse
there shouldn't be a problem with that... put the CWM file in PDA, keep battery in and uncheck the 'auto reboot' and flash away but keep in mind it'll be one time use since there's no custom kernel
blazing through on my 4G Droid Charge

ep1w
ya when i finished the flash, i got into a bootloop on the SAMSUNG logo.

anoninja118 said:
there shouldn't be a problem with that... put the CWM file in PDA, keep battery in and uncheck the 'auto reboot' and flash away but keep in mind it'll be one time use since there's no custom kernel
blazing through on my 4G Droid Charge
Click to expand...
Click to collapse
imoseyon has a custom kernel with ext4 autoconversion and init.d scripting support posted over at rootzwiki. It doesn't have a lot of tweaking since we still don't have source, but I can verify that those two things definitely work.

[email protected] said:
ya when i finished the flash, i got into a bootloop on the SAMSUNG logo.
Click to expand...
Click to collapse
it bootloops right after you unplug it? flashing CWM shouldn't affect anything with how the phone boots
blazing through on my 4G Droid Charge

anoninja118 said:
it bootloops right after you unplug it? flashing CWM shouldn't affect anything with how the phone boots
blazing through on my 4G Droid Charge
Click to expand...
Click to collapse
yes, it bootlooped right after flashing CWM onto EP1W. and after it bootlooped, i tried flashing a fresh EP1W with Odin 1.82, and it didnt want to do it. I was finally able to flash EP1W with Odin 1.85.
2 questions,
1. is there a stock recovery available to flash if i run into this problem again?
2. off topic- is there a Samsung Media Hub APK available for the de-bloated version of EP1W.

LINK
shrike1978 said:
imoseyon has a custom kernel with ext4 autoconversion and init.d scripting support posted over at rootzwiki. It doesn't have a lot of tweaking since we still don't have source, but I can verify that those two things definitely work.
Click to expand...
Click to collapse
do you have a link?
Thanks.

[email protected] said:
do you have a link?
Thanks.
Click to expand...
Click to collapse
http://rootzwiki.com/showthread.php...rnel-(leaked-stock-repacked-v1.0.5ext4-9-6-11)

[email protected] said:
2. off topic- is there a Samsung Media Hub APK available for the de-bloated version of EP1W.
Click to expand...
Click to collapse
Media Hub for Fascinate from the Market has always worked in the past. I can't verify it for sure on EP1W and imoseyon 1.0.5 since my phone isn't on me, but it definitely worked on EP1Q.

Personally, I used Odin v1.83 to load EP1W and then I flashed the imunts CWM 08-17-11 version after that with no problems at all.
However, here is what I did:
After entering Download Mode on the phone, and before starting the flash, I put the battery back into the phone!
Also, I unchecked those two options (auto reboot and reset time)
When both Odin and the phone showed that flashing was completed, I removed the USB and then removed the battery.
I fully loaded EP1W using this method, then I booted up the phone and let it fully boot.
I shutdown the phone and put it back into Download Mode and did the CWM separately. I did not try to flash the EP1W and CWM at the same time.

ya, i didnt try flashing at the same time either, it was days apart, first EP1W, then CWM.
i already had EP1Q, but apparently when i flashed over from EP1Q to EP1W, my CMW was gone, thats why i wanted to flash it onto my phone again.

shrike1978 said:
Media Hub for Fascinate from the Market has always worked in the past. I can't verify it for sure on EP1W and imoseyon 1.0.5 since my phone isn't on me, but it definitely worked on EP1Q.
Click to expand...
Click to collapse
find Nitros Eclipse GB thread in development he has a download link in the OP
blazing through on my 4G Droid Charge

Voodoo Lagfix and others after GB Update?

Okay ... So I am about to update to the latest pushed version. Am rolling back to EE4 now and have the update.zip on my card. What about CWM? Does my current version I've been using with my Gummy Charged 2.1 work with it? I have the Imosyn (sp) kernel on my card that I will apply after the update to 2.3.6 for root, as I understand it.
Are there any Gummy's or anything that are going to work after the 'official' update?

You don't use CWM with the update. You use stock recovery.
Gummy is EP1W. If you install it over the OTA, you'll bring yourself right back down to EP1, and the update will be pointless. You can get lagfix by running imoseyon kernel. It's EP4. It's slightly older EP4, but I haven't had any issues.

shrike1978 said:
You don't use CWM with the update. You use stock recovery.
Gummy is EP1W. If you install it over the OTA, you'll bring yourself right back down to EP1, and the update will be pointless. You can get lagfix by running imoseyon kernel. It's EP4. It's slightly older EP4, but I haven't had any issues.
Click to expand...
Click to collapse
Thank you sir! Phone is updating now. I will apply the imoseyon kernel after it's done. Lagfix is the main thing anyhow, I can nuke the bloatness with my Titanium.

now I'm confused .... I no longer have CWM recovery. How am I to apply the imoseyon kernel via stock recovery? Can I just rename it as update.zip?

By taking it back to stock EE4 and installing the update, one of the things it did was restore the default recovery environment.
Go back into ODIN and install CWM, don't use Auto-Reboot. When it's done flashing, turn the phone off and hold the button combinations to start the phone into CWM. Flash iMoseyOn's kernel and you're done at that point.

trparky said:
By taking it back to stock EE4 and installing the update, one of the things it did was restore the default recovery environment.
Go back into ODIN and install CWM, don't use Auto-Reboot. When it's done flashing, turn the phone off and hold the button combinations to start the phone into CWM. Flash iMoseyOn's kernel and you're done at that point.
Click to expand...
Click to collapse
Ahhhh.... it's @ the Sammy screen and she's talking to me! Looks like all is good while it re-writes the allocation tables. Thanx again, appreciate the heck out of the help.

hmmm .... I guess all is not well ... I installed the kernel but I don't have root. I installed superuser from the market and then Titanium and when opening Titanium I have no root .... what next?

Chopstix9 said:
hmmm .... I guess all is not well ... I installed the kernel but I don't have root. I installed superuser from the market and then Titanium and when opening Titanium I have no root .... what next?
Click to expand...
Click to collapse
You SHOULD have root since the kernel is your root method. Have you tried restarting?
Sent from my SCH-I510 using xda premium

Yeah I sure have. The kernel I used is imoseyon_kernel_charge_gb_4.0.0 ... not rooted .... guess I need to drop five yards and punt (do it all over)
Edit: The one thing I did not do prior to rolling back to EE4 was to do the big 3 wipe of data/cache/etc ..... maybe that's the problem?

Chopstix9 said:
Yeah I sure have. The kernel I used is imoseyon_kernel_charge_gb_4.0.0 ... not rooted .... guess I need to drop five yards and punt (do it all over)
Edit: The one thing I did not do prior to rolling back to EE4 was to do the big 3 wipe of data/cache/etc ..... maybe that's the problem?
Click to expand...
Click to collapse
Try installing Superuser from the Market? imosyeon kernel should have installed binary and apk, but maybe it missed part of it. If all else fails, flash the superuser zip from CWM.
http://www.toms-world.org/android/download/http/Superuser-3.0.7-efgh-signed.zip

Yes, I had installed SU from the market and didn't have root. I had an SU zip saved on my desktop .... su-2.3.6.3-efgh-signed .... I put that on the sd and installed it and I am rooted !!
Thanx Again

I love Lagfix and Voodoo Sound, but I'm currently running the stock kernel. I read in other forum discussion that Samsung designs their kernels to work with their OS revisions. People have said they're getting the best performance with the stock kernel.
Until IMoseyOn releases a new kernel based on the EP4D source that was released, I'm going to stick with stock.
Just some food for thought.

KarateExplosion6 said:
I love Lagfix and Voodoo Sound, but I'm currently running the stock kernel. I read in other forum discussion that Samsung designs their kernels to work with their OS revisions. People have said they're getting the best performance with the stock kernel.
Until IMoseyOn releases a new kernel based on the EP4D source that was released, I'm going to stick with stock.
Just some food for thought.
Click to expand...
Click to collapse
My concern was updating to 2.3.6 and having root. (on the road all day and need wireless tethering so outlook is open on laptop) Using the tad older imoseyon kernel gave me that, plus lagfix, which I have liked since this phone hit the market. I'm good for now, I can always update when the latest and greatest comes out.

Chopstix9 said:
My concern was updating to 2.3.6 and having root. (on the road all day and need wireless tethering so outlook is open on laptop) Using the tad older imoseyon kernel gave me that, plus lagfix, which I have liked since this phone hit the market. I'm good for now, I can always update when the latest and greatest comes out.
Click to expand...
Click to collapse
I have root on the stock kernel bro. Did a clean EE4 install, skipped as much set up as possible, ran update.zip in stock recovery, ODIN flashed imnuts' latest CWM recovery with auto-reboot disabled, booted directly into CWM recovery, flashed the latest SU zip, then ran setup as normal. Boom! Root.
Completely clean install, latest OS and kernel, root, plus tether works and everything.
Right now I'm just waiting on imnuts' TW4 theme to launch (he's estimating Sunday). Hopefully I can install that theme over a debloated and deodexed version of the latest OTA. It won't be long before IMoseyOn releases a kernel built from source that enables Lagfix. That's really all I'm missing, since Voodoo Control lets me load most of Voodoo Sound on top of the stock kernel.
What I'm REALLY looking forward to is an release of Liberty for the Charge or something AOSP if we ever get the 4G RIL sorted out... This things will take considerable time though.

It just doesn't matter ... In all honesty I liked the feel of the Gummy GBE 2.1 better than this stock ginger ... but again, it just doesn't matter to me. Functionality is all I care about, it's only a damn phone !!!

I loaded up the debloated/deodexed/rooted all-in one package danalo posted in development, flashed perfectly and after a wipe in CWM on first boot seems to be running fine except for the poop
sent from my Acer Iconia A500 beast of a tablet via XDA app

KarateExplosion6 said:
I have root on the stock kernel bro. Did a clean EE4 install, skipped as much set up as possible, ran update.zip in stock recovery, ODIN flashed imnuts' latest CWM recovery with auto-reboot disabled, booted directly into CWM recovery, flashed the latest SU zip, then ran setup as normal. Boom! Root.
Completely clean install, latest OS and kernel, root, plus tether works and everything.
Right now I'm just waiting on imnuts' TW4 theme to launch (he's estimating Sunday). Hopefully I can install that theme over a debloated and deodexed version of the latest OTA. It won't be long before IMoseyOn releases a kernel built from source that enables Lagfix. That's really all I'm missing, since Voodoo Control lets me load most of Voodoo Sound on top of the stock kernel.
What I'm REALLY looking forward to is an release of Liberty for the Charge or something AOSP if we ever get the 4G RIL sorted out... This things will take considerable time though.
Click to expand...
Click to collapse
Care to make a thread of what you done? Files used? I want to re-root my Charge, but want to keep the latest ota update and radios. Main question is the "update.zip" file?

iMoseyOn has stated that he's not going to be developing kernels anymore due to him having to turn in all of his phones to his old employer. He's taken up a new job and because of that he has to return his phones, including the Droid Charge.

trparky said:
iMoseyOn has stated that he's not going to be developing kernels anymore due to him having to turn in all of his phones to his old employer. He's taken up a new job and because of that he has to return his phones, including the Droid Charge.
Click to expand...
Click to collapse
Yeah, I read last night. Awful news. I hope someone can just get us full Voodoo and EXT4 support. I don't absolutely need OC/UV, but it'd be nice...
In other bad news, imnuts is getting a Galaxy Nexus and only pledging support for the Charge for "a few more months."
Let's hope JT and the gang can get this RIL figured out, so we can at least have Team Douche to continue development with CM 7.2 and CM 9...
Sent from my SCH-I510 using xda premium

Damn. And I thought it couldn't get any worse with iMoseyOn leaving. And now we have imnuts leaving too? It just went from bad to worse in a matter of 48 hours!
Guess I better get used to just using the stock kernel.

Looking for a stable rom

so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!

nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.

Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App

thanks for the advice guys!

I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?

You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App

This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.

One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.

yep
+1 Valhalla black edition! Installed today and love love love.

ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!

nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.

thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.

nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).

Upgrade to FP1 question (any issues with this method?)

Inherited a Droid Charge running GummyCharged 2.1 from my housemate.
I want to switch to Eclipse 2.0. I know in order to run FP1 builds, you need to run stock kernel if you want wifi. Except, I also noticed that the PBJ kernel recently fixed the wifi issue.
I'm under the impression you're told to revert to stock, run OTA update, then flash your FP1 ROM so you have the latest stock kernel.
Or is there more to it than the kernel?
I'd rather skip the revert/flash/etc/etc, I updated to the latest CWM, made a backup, factory restored, wiped cache/dalvik, flashed ROM, flashed kernel, rebooted, everything seems fine (wifi working no issues). But... that doesn't mean that it is.
EDIT: Yeah, my baseband in About Phone shows i510.06 V.EE4 SCH-I510.EE1, which is what it was before. Can I get just the baseband?
Thanks!
By the way, I don't care about carrier signal at all, this phone got wet and no longer accepts SIM cards. The other functions still work, so I'm using it on wifi and I'm trying to re-purpose the device to be a portable offline GPS for hiking. But I did read that FP1 gets better GPS locks, which is part of why I want to run it.

U cant get the fp1 upgrade on a cstom rom. U have to go back to stock n get the ota upgrade. I suggest usin titanium to back up ur stuff then flash what u want. Stock fp1 or pjb 5/24 r both good, but u gta get back to factory first.
Sent from my SCH-I510 using XDA

Actually, I figured "what you do do well" and I decided to follow the suggested directions. I used ODIN, restored to stock EP4... and couldn't get past the main screen. Can't read SIM cards, so can't get past the activate screen. I then flashed back an FP1 rom, the latest PBJ kernel, and [attempted] to use the EP4 to FP1 patch, which hung and failed.
It looks like if I want to get my baseband to FP1, I'll have to jump through hoops (maybe flashing a stock EP4 pre-rooted ROM from ODIN? maybe?) Regardless, since the CDMA antenna in this thing is useless anyway, I'm just gonna skip it.
Thank you for your reply!

Well, now that you have borked your phone a bit, go and download the EP4 ODIN package and flash it (in ODIN or SamsungPST). Might not be a bad idea to flash the PIT while you're at it. You'll probably have to flash CWM, and then PBJ from within CWM (stock kernel overwrites it) Then go and try flashing your ROM of choice again (cough *tweaked* cough), either in ODIN (with the respective package) or CWM. (again with the proper package).
http://www.imnuts.org/odin-packages/
Sent from my SCH-I510 using xda premium

thanks kvswim, that's pretty much exactly what I did yesterday. I'm even running Tweaked 2.1
It's too bad, I really prefer the theme of Eclipse, but I just couldn't handle the lack of TSM Parts.

Help! boot loop

ok so i rooted a few weeks ago and downloaded the usual apps. super user titanium back up and clock work mod. tried to flash a rom with clock work mod and got the e:signature verification failure message. found a post for a kernal that made clock work mod actually work so i tried to flash a rom. zSimplyAOKPV5_Dark to be exact. now it sticks on boot screen. i have searched for hours and cannot find a way to fix my problem. its my first rooted android and first attempted rom flash and i botched it right off the rip. please help?

Depending on what you did beforehand, you have some options.
If you have backed everything up previously, just flash back to stock with one of the one-click stock roms in the Development section (they're in a sticky).
If you haven't backed everything up, try holding V+/V-/power until it reboots. If it doesn't take you to recovery, you can try to flash a kernel (most likely one that would match the version of android/rom you were running prior to this flash) and see if it lets you into recovery. You'll have to flash it with either Odin or Heimdall, after rebooting into download mode (power off, hold V+/V-, insert USB).
If that doesn't work, though, the stock flashing would probably be your best and/or only bet.

it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.

phoenixfriend said:
it wont allow me into recovery though i can get to download mode by pulling the battery and pressing just the volume +- and plugging in the usb. i was trying to flash an ics slim rom. thanks for your very speedy response.
i have now tried to flash a stock rom however it is not working from there even with the stock kernal. now it is hanging on the at&t screen.
ok i got it. seems the kernal i flashed to help cwd work properly was the culprit. now i dont know how im going to flash this ics rom im looking at without it.
Click to expand...
Click to collapse
Flash corn kernel if you have stock gingerbread
Sent from my SGH-I897

The utility in my signature can help you flash the Corn Kernel so that you will have CWM.

I have corn kernal and odin 3 on the computer at home. Ill do that tonight. Any suggestions on a good stable rom for a noob? Preferably ics. I hated posting for fear of being flamed as a noob. My wife keeps making fun of me for it so I kinda have to get it done. I want to fix hers also. Its a great little phone it just seem a bit buggy to me. Very laggy. Thanks for all the help.
Sent from my SAMSUNG-SGH-I897 using XDA

Maybe start with a KK4 based rom such as Legend and then move up to ICS after that. I only say that because there is a bug in ICS that could render your internal SD unusable. It's rare, but when it happens you will not be happy.

Still unable to get corn kernal to flash. I've tried a few of your guys fixes but I'm gonna have to get some other updates to my computer first.
Sent from my SAMSUNG-SGH-I897 using XDA