Related
Im getting FC when HTC Sense tries to sync. Running Latest LeeDroid ROM and Kernel. Anyone else having this issue or know of a solution?
sickb138 said:
Im getting FC when HTC Sense tries to sync. Running Latest LeeDroid ROM and Kernel. Anyone else having this issue or know of a solution?
Click to expand...
Click to collapse
I assume you've read/asked in the appropriate LeeDroid ROM thread.
I also assume you did the recommended pre-flash wiping/etc. for that ROM, and haven't restored any system data left over from your previous ROM by way of titanium backup or similar, correct?
You might get a better-focused subset of the XDA community there.
Thanks for the reply Scott. Yes I have done the recommended wipe and flash process, however Im not able to post in the leedroid dev thread yet as Im a new member. Just thought Id give it a try in here. Thanks anyway
sickb138 said:
Thanks for the reply Scott. Yes I have done the recommended wipe and flash process, however Im not able to post in the leedroid dev thread yet as Im a new member. Just thought Id give it a try in here. Thanks anyway
Click to expand...
Click to collapse
I kind of figured that might have been the reason.
Just a friendly reminder that the answer you seek may already be available in that thread. It's a pretty popular ROM, and I'm sure someone has run into a similar issue already...
I've tried to root my ATT HTC Inspire a couple of times over the last few week - I always end up w/ the same issue.
Using the XDA Hack Kit 2.3, the process proceeds smoothly . . goldcard, check. down grade, check. after the downgrade I can run setup and have full network access, etc.
But when the S-off / sound fix install step is completed, I am unable to secure access to the internet, period. In set-up, I get an "unable to determine your region" message for HTC sense. I can not set up google services because "the server fails to respond" ... I *can* connect to my WiFi network no problem. I can make calls, but every website I try to access is "not found".
I've tried a number of different radios, all give me the same problem. I'm tempted to say it's some type of DNS error (looks like the symptoms of one, anyway) but I'm not familiar enough w/ Android to know if that's a good guess.
SO I've returned to stock today for the 4th time. Any ideas? I don't see this issue posted anywhere . . if it is, just point me in the right direction, and I'd appreciate it.
Thanks!
i swear this has been covered a hundred times....hell, i have read it 20 times this week....
you are on the downgrade rom, it doesnt work, and isnt meant to be used as a daily driver.
INSTALL A CUSTOM ROM
Read above - - several custom ROMs installed, net access does not come back.
{this is what "I've tried a number of different radios, all give me the same problem." would mean}
Including, Stock ATT, ATT OTA update, Cyano, etc.
Thanks, though, for your quick read and assumptions. Speed isn't quite a substitute for useful advice.
timpilcher said:
Read above - - several custom ROMs installed, net access does not come back.
{this is what "I've tried a number of different radios, all give me the same problem." would mean}
Including, Stock ATT, ATT OTA update, Cyano, etc.
Thanks, though, for your quick read and assumptions. Speed isn't quite a substitute for useful advice.
Click to expand...
Click to collapse
and obviously attention to detail isnt exactly your forte
RADIOS != ROMS
good goin there sparky
@timpilcher, hey just happened by this post and thought I could lend a hand. I'm from evo 4g forums.
However, ROM's and radios are two different items. What it sounds like you need to do is flash a custom ROM, and then upgrade your radios. I am sure there is a thread for that within your section that contains the updated radios. These have to do with the actual signal of you're phone, where the ROM is just the interface.
Sent from my PC36100 using xda premium
Thank you.
Yes, I guess I was confused. The radio files are named "rom.zip" in the install procedure, and they are placed in the "rom.zip" directory in order to be installed w/ the XDA cmnd script. I'm familiar w/ flashing custom ROMs in PCs, but I've never had need to mess w/ a phone before.
So, yeah, I found it confusing. Thanks for clearing it up.
imheroldman said:
@timpilcher, hey just happened by this post and thought I could lend a hand. I'm from evo 4g forums.
However, ROM's and radios are two different items. What it sounds like you need to do is flash a custom ROM, and then upgrade your radios. I am sure there is a thread for that within your section that contains the updated radios. These have to do with the actual signal of you're phone, where the ROM is just the interface.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Here is the link to the radio update page. May have newer radios than what you currently have.
http://forum.xda-developers.com/showthread.php?t=1106324
Sent from my PC36100 using xda premium
So as speedy Pirateghost said, flash a custom ROM first and then flash the radio that goes with it.
Agoattamer said:
So as speedy Pirateghost said, flash a custom ROM first and then flash the radio that goes with it.
Click to expand...
Click to collapse
HEY!
keep my 'useless advice' out of here!
Pirateghost said:
HEY!
keep my 'useless advice' out of here!
Click to expand...
Click to collapse
Just had to LOL at this.
Ya ghost, pretty useless stuff (wink wink)
Sent from my Inspire4G using xda premium
Do I have to somehow uninstall the old kernel before installing a new one?
nvus said:
Do I have to somehow uninstall the old kernel before installing a new one?
Click to expand...
Click to collapse
No, just download the kernel of your choice>put on your sd card>boot into CWM> wipe cache and dalvik cache>then flash your new kernel>reboot>enjoy.
Sent from my LG-P999 using XDA
Glad to see you followed my advice.
Sent from my LG-P999 using XDA
sort of. If there is anything from the old one that the new one doesn't overwrite it will remain. Just in case I reinstall my base rom when changing from one custom kernel to another
Sent from my LG-P999 using Tapatalk
I ended up just clearing the cache and dalvik cache, then installing it.
New kernel won't boot
Hi, I just rooted my phone w/the latest CM (7.1.0.1) and I tried to install a new kernel using the above steps, and every one I try gives me the kernel boot screen, and then gets stuck at a blank screen. It lights up when I touch the screen, but nothing else.
Thankfully I did a NANDROID backup, got back into cm. But still can't figure out what's wrong.
BTW, CM7 running 2.3.7. Have also tried data wipe of OS, w/reinstall of CM, then flashed kernel, but still no luck. Always get stuck at blank screen after kernel boot.
also, I tried both morfic's Trinity kernel (both of them) and faux, can't seem to get anything different.
Suggestions?
absalom said:
Hi, I just rooted my phone w/the latest CM (7.1.0.1) and I tried to install a new kernel using the above steps, and every one I try gives me the kernel boot screen, and then gets stuck at a blank screen. It lights up when I touch the screen, but nothing else.
Thankfully I did a NANDROID backup, got back into cm. But still can't figure out what's wrong.
BTW, CM7 running 2.3.7. Have also tried data wipe of OS, w/reinstall of CM, then flashed kernel, but still no luck. Always get stuck at blank screen after kernel boot.
also, I tried both morfic's Trinity kernel (both of them) and faux, can't seem to get anything different.
Suggestions?
Click to expand...
Click to collapse
Which CM7 exactly and which kernels exactly?
absalom said:
Hi, I just rooted my phone w/the latest CM (7.1.0.1) and I tried to install a new kernel using the above steps, and every one I try gives me the kernel boot screen, and then gets stuck at a blank screen. It lights up when I touch the screen, but nothing else.
Thankfully I did a NANDROID backup, got back into cm. But still can't figure out what's wrong.
BTW, CM7 running 2.3.7. Have also tried data wipe of OS, w/reinstall of CM, then flashed kernel, but still no luck. Always get stuck at blank screen after kernel boot.
also, I tried both morfic's Trinity kernel (both of them) and faux, can't seem to get anything different.
Suggestions?
Click to expand...
Click to collapse
Make sure the kernel you are using is made for CM7 roms. There are kernels that made to work on Froyo, Gingerbread, CM7, and MIUI.
Sent from my LG-P999 using XDA
absalom said:
Hi, I just rooted my phone w/the latest CM (7.1.0.1) and I tried to install a new kernel using the above steps, and every one I try gives me the kernel boot screen, and then gets stuck at a blank screen. It lights up when I touch the screen, but nothing else.
Thankfully I did a NANDROID backup, got back into cm. But still can't figure out what's wrong.
BTW, CM7 running 2.3.7. Have also tried data wipe of OS, w/reinstall of CM, then flashed kernel, but still no luck. Always get stuck at blank screen after kernel boot.
also, I tried both morfic's Trinity kernel (both of them) and faux, can't seem to get anything different.
Suggestions?
Click to expand...
Click to collapse
Make sure the Faux you use is made for CM7. There are 2 different kernels.
Sent from my LG-P999 using XDA
Uh, guys, you're missing one thing. He's way back on the stable release. I found this out the same way a while back. The Kernels are based of a newer source than the ROM he's running and thus incompatible.
OP: grab Titanium back up and My Backup Root. Use titanium to back up your apps and accompanying data, for safety's sake don't use it to back up system data at this point, since there's going to be a good number of differences between your current ROM and the one I'm going to PM you. Use My backup Root to back up contacts, messages, et al.
^Why did you just PM me some shady link? My problem has been solved and it wasn't anything close to your 'solution'.
Shady link? You're an idiot.
Sent from my LG-P999 using xda premium
It doesn't even relate to my original post at all. Scrub
Kernels seem OK. CM is 7.1...?
russell956956 said:
Make sure the kernel you are using is made for CM7 roms. There are kernels that made to work on Froyo, Gingerbread, CM7, and MIUI.
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
The Trinity Kernel found on Morfic's website derkernel is made for CM7 (GB)
SefEXE said:
Which CM7 exactly and which kernels exactly?
Click to expand...
Click to collapse
Волк said:
Uh, guys, you're missing one thing. He's way back on the stable release. I found this out the same way a while back. The Kernels are based of a newer source than the ROM he's running and thus incompatible.
OP: grab Titanium back up and My Backup Root. Use titanium to back up your apps and accompanying data, for safety's sake don't use it to back up system data at this point, since there's going to be a good number of differences between your current ROM and the one I'm going to PM you. Use My backup Root to back up contacts, messages, et al.
Click to expand...
Click to collapse
I used the stable build on the cm site, which lists on my phone as CM7.1.0.1-G2x. The Kernel Version says it's 2.6.32.45-cyanogenmod. The faux kernel also found on xda-dev forum for the g2x seems to be for cm7 gb, and in any case I tried both that I found, uv and sv. Still stuck.
Any help would be nice. Oh, and in case you haven't figured it out yet, I'm a n00b.
nvus said:
^Why did you just PM me some shady link? My problem has been solved and it wasn't anything close to your 'solution'.
Click to expand...
Click to collapse
You have 17 posts and joined last month. His advice is sound. Please post his shady link. If he is directing you to things against forum rules, people need to know.
jcbofkc said:
You have 17 posts and joined last month. His advice is sound. Please post his shady link. If he is directing you to things against forum rules, people need to know.
Click to expand...
Click to collapse
I deleted it already. It's just the name of the link was sketchy and his "solution" to my question wasn't even what my question was addressing. So it seemed like a generic spam message if you know what I mean.
jcbofkc said:
You have 17 posts and joined last month. His advice is sound. Please post his shady link. If he is directing you to things against forum rules, people need to know.
Click to expand...
Click to collapse
+1
Come on OP, maybe you can at least remember some tiny detail of the link I posted. As I stated before: Euroskank nightlies. Google it, ask around about it. For everyone: As the quoted member points out, the OP has how many posts and joined when? Also, what has he posted? The title of this thread is nonsensical, obviously he doesn't know what a kernel is or he wouldn't be asking about how to "uninstall" one.
Now, I post what and where, say what, and speak how?
Period.
Oh, and OP, what was your magical "fix" that you say worked but only state that "it" worked? Others may (and do) want to know.
absalom said:
The Trinity Kernel found on Morfic's website derkernel is made for CM7 (GB)
I used the stable build on the cm site, which lists on my phone as CM7.1.0.1-G2x. The Kernel Version says it's 2.6.32.45-cyanogenmod. The faux kernel also found on xda-dev forum for the g2x seems to be for cm7 gb, and in any case I tried both that I found, uv and sv. Still stuck.
Any help would be nice. Oh, and in case you haven't figured it out yet, I'm a n00b.
Click to expand...
Click to collapse
Those kernels are only compatible with nightly 173ish plus. Get off the stable build and grab a nightly, Hellfire Phoenix, or any other newer cm7 based rom. The euroskank nightlys are nice
Sent from my LG-P999 using Tapatalk
Волк said:
+1
Come on OP, maybe you can at least remember some tiny detail of the link I posted. As I stated before: Euroskank nightlies. Google it, ask around about it. For everyone: As the quoted member points out, the OP has how many posts and joined when? Also, what has he posted? The title of this thread is nonsensical, obviously he doesn't know what a kernel is or he wouldn't be asking about how to "uninstall" one.
Now, I post what and where, say what, and speak how?
Period.
Oh, and OP, what was your magical "fix" that you say worked but only state that "it" worked? Others may (and do) want to know.
Click to expand...
Click to collapse
Why you mad? First of all my post isn't even asking for a "fix". And you can see I'm a new member so why would I trust a link that has the phrase "euroskank" in it? How am I supposed to know that's a trusted link if I'm new?
nvus said:
Do I have to somehow uninstall the old kernel before installing a new one?
Click to expand...
Click to collapse
I looked again and I don't see where I'm asking for a "fix" of any sort...
Comma,
nvus said:
Why you mad? First of all my post isn't even asking for a "fix". And you can see I'm a new member so why would I trust a link that has the phrase "euroskank" in it? How am I supposed to know that's a trusted link if I'm new?
I looked again and I don't see where I'm asking for a "fix" of any sort...
Comma,
Click to expand...
Click to collapse
Euroskank roms are very reliable. Some of us use them and since they are not in this forum the user pm you the link. Check it out. Just be careful calling people out next time.
Sent from my LG-P999
Just got myself a G2X, I rooted it everything is working fine EXCEPT WiFi Calling, it just says "enabling" has anyone heard of a fix for this yet?
I have the stock rom but I am rooted. I haven't flashed the new CM9 yet but want to get this thing working on the stock rom I have.. I read someone mentioned something about grabbing an old sim card? I have had zero luck finding one.
Is there a fix for this? any flashable solution? thanks.
dannynyc said:
Just got myself a G2X, I rooted it everything is working fine EXCEPT WiFi Calling, it just says "enabling" has anyone heard of a fix for this yet?
I have the stock rom but I am rooted. I haven't flashed the new CM9 yet but want to get this thing working on the stock rom I have.. I read someone mentioned something about grabbing an old sim card? I have had zero luck finding one.
Is there a fix for this? any flashable solution? thanks.
Click to expand...
Click to collapse
People will help if you post in the correct place, this is development. Mods please delete before the flaming begins
Sent from my LG-P999 using xda premium
this is in the completely wrong section but just use titanium backup and uninstall wifi calling. unless you actually use it..
The new 21y firmware appears to fix All the problems that I had before....so I'd suggest updating if that is possible
Sent from my LG-P999 using XDA
arvonn said:
The new 21y firmware appears to fix All the problems that I had before....so I'd suggest updating if that is possible
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
Where can I find the 21y firmware?
Sorry about posting in wrong forum, figured I needed to have rooted phone in order to flash a fix..
Wrong section
nitrogen618 said:
Wrong section
Click to expand...
Click to collapse
No **** Sherlock.
Sent from Narnia
dannynyc said:
Where can I find the 21y firmware?
Sorry about posting in wrong forum, figured I needed to have rooted phone in order to flash a fix..
Click to expand...
Click to collapse
Search, and ye shall be informed. EVERYTHING you need answered has already been posted in the forums. Look and read, then read some more. If you run in to any problems... read some more.
Q&A for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] SlimKat (d2vzw) Stable 7.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
like this rom
i like this rom only had a few problems but after a reboot seams to be working good again
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
I had that problem when I was using certain builds. I had to drop modem back to BMB1. After that I could send with no issue. I, too could only send one text at a time.
msolaw said:
I have the weirdest thing happening. I'm on stable 7 and have been for quite a while. It's worked perfectly until a couple days ago and now I can't send text messages out. I think I can receive OK. Just can't send out. I've even tried doing a clean install of this and other ROMs with same result. It gets more odd... After toying with it I can send only one text out. Just one to any person. But I can't send another unless I reboot or I think wait a few hours. Upon reboot I again can send only one text message out. And so on. I have no clue what could be happening. Any ideas?
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Where can I turn off the swipe security on the 8.12 update?
markapowell said:
Where can I turn off the swipe security on the 8.12 update?
Click to expand...
Click to collapse
Lockscreen tweaks are in Settings/Interface/Lockscreen
Sent from my SCH-I535 using Tapatalk
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
myredfast said:
What kernel and baseband is recommended to use with this Rom? I haven't used my s3 in awhile and just want to make sure I get it right... Right now I'm on cleanrom 4.5 which is 4.1.1 and on baseband vrblk3.. I did install the latest twrp already.. Thank you in advance and sorry if this was asked and answered already
Click to expand...
Click to collapse
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
Stock kernel and VRBMF1 firmware is the bassline recommendation. TWRP 2.7 at least, newest TWRP 2.8 works fine as well.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thank you much[emoji2]
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
myredfast said:
I was able to locate the firmware and had a tough time finding the stock kernel as many links for many things are no longer good... I downloaded what I thought was the "stock kernel v2" however when I try to flash after flashing the firmware in twrp I get a failed message "unable to open zip file".. Any thoughts, thank you in adv. Have twrp 2.8.0.1 btw and flashed MF1 firmware....
Click to expand...
Click to collapse
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
Noooooo haha stock kernel as in the kernel built-in the rom. All you need to flash is SlimKat and gapps then boot.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
myredfast said:
Lol the last time I was flashing this phone I was doing them separate and I thought that it might be built Into the Rom. that's what I did and it's seems to be working other than one freeze up... All good, now that I feel like a complete noob, on with flashing my lg g3... Thanks a lot Snoop I apreesh!!
Click to expand...
Click to collapse
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
That's my bad on the ambiguity! Haha glad you've got it all set up. Just to clarify, every rom comes with a boot.img which is what becomes the kernel. Custom kernels are slightly different.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Hey no problem, it's all good.. I guess we all have "moments" lol. After looking back on it I was like "Damn I should have known that" haha... I just really appreciate all you and other devs do for the community [emoji106] ?!!! Phone is running champ doe!!! Thanks again! And thanks for clearing that up[emoji2]
GPS issue with latest nightly
Just an FYI, I tried the latest nightly and got zero GPS fix, even with a clean flash. I went back to the latest stable build (also a clean flash) and everything's cool with that, except for my inability to view pics within Gmail. :/
Portable Wi-Fi Hotspot
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
ooom416354 said:
Hi, I just loaded up Slimkat 4.4.4 with the stock kernel on my Verizon Galaxy S3. I used to use the Wifi Tether TrevE Mod with my previous version and that worked, however, this does not appear to work in this rom. I noticed there was a built in Portable Wi-Fi hotspot, which does work perfectly. I would like to use this but am just concerned that somehow VZ would know I am tethering and I would incur additional charges. Do I have anything to worry about or am I just being paranoid?
Thank you for a GREAT product, it's a spectacular rom.
Click to expand...
Click to collapse
Nope. Lot of us have used it for months with no issue whatsoever.
Sent from my SCH-I535 using Tapatalk
Google Play Services not Installed
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
wundbread said:
Just did a dirty flash of 9 stable over 7 stable flashed the latest gapps, and now the Google play store does not work and a bunch of apps are requesting the install of Google Play Services.
Any tips?
Click to expand...
Click to collapse
You could try clearing data for the Play Store. I always encourage a clean flash (wipe data and system) before each new release.
Sent from my SCH-I535 using Tapatalk
Any updates on that "further notice"?
Sent from my SM-T900 using XDA Free mobile app