I installed RSDlite 4.6 on my computer, installed the right drivers, found the right .sbf (stock CBW 2.1), and put the phone into bootloader mode but when the device is recognized and I click "start", it immediatly gives me the message "Flashing process failed 0x7100." What would this be caused by? (I am running Vista 32bit)
THANKS
maybe this will fix your trouble..
If that doesn't work, turn off UAC or "Run as Administrator", or run in XP Mode.
Thanks for your help. I set everything up on a win 7 64bit machine the same way and IT WORKED!! No more bricked phone
donovanx3 said:
Thanks for your help. I set everything up on a win 7 64bit machine the same way and IT WORKED!! No more bricked phone
Click to expand...
Click to collapse
Can you explain what did you done?
Related
i whent to update this rom on my phonme and right when it was about to load it the updater on my pc crashed and vista gave some gay error help me plz?
c0x69 said:
i whent to update this rom on my phonme and right when it was about to load it the updater on my pc crashed and vista gave some gay error help me plz?
Click to expand...
Click to collapse
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP
Lunatixz said:
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP
Click to expand...
Click to collapse
he's right, and to add, you may want to start with a base rom from your providor ie t-mobile, cingular.. start with the latest rom release and use that as a clean base to flash from. good luck.
Lunatixz said:
Search the fourm... Do not try and update using vista.. it's buggie use XP only... try putting your phone in bootloader and update using XP
Click to expand...
Click to collapse
I wasted about half an hour because of this
try it in vista, it will fail and put your phone into rainbow mode.
Then take it as is to a PC with XP
plug it in via usb and follow normal directions and it should function!
I am at 97% finally,
the phone was NOT getting recognized in XP after trying it in vista till I tried the raindbow Flash method.
So, I tried to use Parallels (running windows XP) on my Intel Imac to flash a Kaiser Rom onto my AT&T Tilt. I'm currently stuck on the bootloader. I think I did find a solution, but I need to wait 10 minutes til I can download another Rapidshare file. In the meantime . . .
I think I did everything right. HardSPL worked fine, but then, when I tried to flash Dutty's Dual v4 ROM, it stopped at 6% and told me there was a communication error. I tried it a few more times, tried Dutty's Touchflo Rom (that got to 4%) . . . still no luck. Same error. In between each try, I reset using the stylus and sometimes the stylus while holding down power and camera.
Am I doing something wrong, or was my mistake trying to do this via parellels?
Current screen says:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
USB
Thanks, guys.
I can confirm that if you install xp via boot camp then you can flash fine on a mac. I haven't tried going through an emulator such as parallels though. It should work fine though as long as parallels has taken over the usb ports.
Yeah, the USB connection wasn't the problem. And, unfortunately, I don't have extra XP licenses lying around to bootcamp. my mac.
Anyone have any idea? I'll give you a cookie . . .
By the way
It is error 262 that I'm getting . . .
I went through bootcamp boot as well, I rather assumed that I was going to need direct access to the hardware rather than the pass through of parallels...
btw you can set up parallels to boot a bootcamp partition... so you can use the direct boot and parallels from the same installation.
drewcopeland said:
It is error 262 that I'm getting . . .
Click to expand...
Click to collapse
I might have to look into that. My "solution" didn't work. I'm going to try to find the original ROM somewhere . . .
zenrandom said:
I went through bootcamp boot as well, I rather assumed that I was going to need direct access to the hardware rather than the pass through of parallels...
btw you can set up parallels to boot a bootcamp partition... so you can use the direct boot and parallels from the same installation.
Click to expand...
Click to collapse
I am using Fusion instead of Parallels but this is what I do. I only have 1 copy of xp installed via bootcamp but I can also access it through Fusion.
I also have fusion on my MacBook Pro, and it failed when tried to flash. So I bootcamp and started XP and it flashed flowlessly
If you own original XP CD (like me) you can always call microsoft to activate, and since it is installed in 1 PC then fine (you'll have 1 license for parallel & another for Bootcamp)
drewcopeland said:
So, I tried to use Parallels (running windows XP) on my Intel Imac to flash a Kaiser Rom onto my AT&T Tilt. I'm currently stuck on the bootloader. I think I did find a solution, but I need to wait 10 minutes til I can download another Rapidshare file.
Click to expand...
Click to collapse
Which version of parallels do you have? In version 5160 the usb flashing works fine, in 5582 it is broken, as is in version 5584. They had an special build 5582.5 which allowed me to flash my phone correctly and according to parallels, the "next" version will include those usb fixes.
I'm using the latest version 5584 and when I need to flash my phone, first i shut down windows vm, install parallels 5160 over the current version and then boot up windows. I ignore the installation of parallels tools and just flash my phone. Then shut down windows again, re-install parallels 5584 and all is fine again.
Hope this helps you...
that does. Do you mean the most recent update will work?
edit: never mind. the most recent is 5583. I'll try to find 5160
drewcopeland said:
Yeah, the USB connection wasn't the problem. And, unfortunately, I don't have extra XP licenses lying around to bootcamp. my mac.
Anyone have any idea? I'll give you a cookie . . .
Click to expand...
Click to collapse
If you have a valid license for parallels, then you have a valid license to use bootcamp...
That said, I have flashed through parallels and vmware fusion TONS of times (about to do it again, in fact). So long as you've routed the "HIGH GENERIC RNDIS" device to the virtual machine it should work fine.
I posted this in another thread, but created this new one specifically for these users that are having this issue and can't solve it because they don't have access to an XP machine.
I solved my issue late last night. I am running Windows 7 64bit. I saw that a lot of the guys here used XP to run the KDZ flasher and that wasn't an option for me until I installed XP Mode.
XP Mode allows you to run a virtual XP machine inside Windows 7. I was able to run the KDZ flasher in there and successfully flashed the KDZ GB file to my phone.
You do need to flash stock recovery first. I tried unsuccessfully to flash the KDZ with CWM recovery installed. It would not work until I flashed stock recovery.
One other problem I ran into is, in XP Mode, you are "attaching" USB devices to the virtual XP session via a "stub USB driver." For some reason during the KDZ flashing process the USB modem driver for LG kept releasing from my session. What I did to counteract this was manual attach it each time it released. This was easy, but I had to stay on top of it until the flasher finished the job. I have two monitors so I had the "Devices and Printers" window open in Windows 7, and when I heard the ding indicating the USB driver had left the session, and saw the LG devices appear in the Devices and Printers window, I would just click attach on the USB pulldown in the XP session.
I know this sounds a little complex for some (and possibly vague), but once you get into the XP Mode session you will see what I'm talking about.
I hope this helps you guys still stuck on SW Update screen that don't have XP.
hey guys whats up
i lost my nerves for 2 days tr5ying everything to bring back to life my P990..
since im huge noob with android i messed up everything when i tried to update phone with cm7. anyway i can bring it back to life with rom for p999 and thats it...
all other techniques dont work. cant even boot phone or whatever.. tried smartflash but i dont get anything what should be automaticaly assigned.. like communication driver..com port etc. i wanted to try kdz but this file cant be downloaded..its forbidden on lg site and now it cant be downloaded on megaupload. can i download file from somewhere else? im really pissed off cuz im stuck like this. please help
http://forum.xda-developers.com/showthread.php?t=1056847
And if you have a P990, you're in the wrong forum (this forum is for the P999).
omerika.emir said:
hey guys whats up
i lost my nerves for 2 days tr5ying everything to bring back to life my P990..
since im huge noob with android i messed up everything when i tried to update phone with cm7. anyway i can bring it back to life with rom for p999 and thats it...
all other techniques dont work. cant even boot phone or whatever.. tried smartflash but i dont get anything what should be automaticaly assigned.. like communication driver..com port etc. i wanted to try kdz but this file cant be downloaded..its forbidden on lg site and now it cant be downloaded on megaupload. can i download file from somewhere else? im really pissed off cuz im stuck like this. please help
Click to expand...
Click to collapse
The Roms for the p999 and the p990 are not inter changeable. Different frame work.
jrfaulkin said:
I posted this in another thread, but created this new one specifically for these users that are having this issue and can't solve it because they don't have access to an XP machine.
I solved my issue late last night. I am running Windows 7 64bit. I saw that a lot of the guys here used XP to run the KDZ flasher and that wasn't an option for me until I installed XP Mode.
XP Mode allows you to run a virtual XP machine inside Windows 7. I was able to run the KDZ flasher in there and successfully flashed the KDZ GB file to my phone.
You do need to flash stock recovery first. I tried unsuccessfully to flash the KDZ with CWM recovery installed. It would not work until I flashed stock recovery.
One other problem I ran into is, in XP Mode, you are "attaching" USB devices to the virtual XP session via a "stub USB driver." For some reason during the KDZ flashing process the USB modem driver for LG kept releasing from my session. What I did to counteract this was manual attach it each time it released. This was easy, but I had to stay on top of it until the flasher finished the job. I have two monitors so I had the "Devices and Printers" window open in Windows 7, and when I heard the ding indicating the USB driver had left the session, and saw the LG devices appear in the Devices and Printers window, I would just click attach on the USB pulldown in the XP session.
I know this sounds a little complex for some (and possibly vague), but once you get into the XP Mode session you will see what I'm talking about.
I hope this helps you guys still stuck on SW Update screen that don't have XP.
Click to expand...
Click to collapse
I'm running Windows 7 Home premium 64 Bit and Virtual XP Mode is not compatible with this version of Windows 7... Is there another way around this issue...???
Erocks said:
I'm running Windows 7 Home premium 64 Bit and Virtual XP Mode is not compatible with this version of Windows 7... Is there another way around this issue...???
Click to expand...
Click to collapse
VMware with XP on it/Google how to bypass limitation?
Found this to get Xp Mode on home edition idk if it works I just use VMware personally
http://m.tomshardware.com/news/windows-xp-mode-windows-7-win7,10213.html
Sent from my LG-P999
Have the latest version of Moto Drivers and RSD Lite. installed under Windows 8.1 64 bit.
Phone is detect as a media device with factory cable, but in fastboot on the phone I get nothing with RSD Lite. Is there some issue with Windows 8.1? I can get it to detect just fine on a spare Windows 7 machine.
Any pointers or suggestions would be greatly appreciated.
It sounds like you are missing the fastboot drivers. With the phone plugged into the PC, boot to fastboot. then enter the windows device manager screen (from a run box type mmc devmgmt.msc and hit enter).
Make sure there is nothing with a yellow ? next to it. If there is, try completely removing the moto driver package you have installed, and reinstalling it from the moto site
asuhoops8628 said:
It sounds like you are missing the fastboot drivers. With the phone plugged into the PC, boot to fastboot. then enter the windows device manager screen (from a run box type mmc devmgmt.msc and hit enter).
Make sure there is nothing with a yellow ? next to it. If there is, try completely removing the moto driver package you have installed, and reinstalling it from the moto site
Click to expand...
Click to collapse
Thanks for the input and suggestions. Done and done, still no joy. Tried different ports and went back and forth uninstalling and reinstalling from the Moto website. RSD Lite just won't see the phone in AP Fastboot Flash mode.
I know I have used RSDLite before on this machine with this phone when I did the SlapmyMoto or RockmyMoto to gain root a while back. Just can't figure out what is holding me back at this point... Any other other suggestions?
rtaylor429 said:
Have the latest version of Moto Drivers and RSD Lite. installed under Windows 8.1 64 bit.
Phone is detect as a media device with factory cable, but in fastboot on the phone I get nothing with RSD Lite. Is there some issue with Windows 8.1? I can get it to detect just fine on a spare Windows 7 machine.
Any pointers or suggestions would be greatly appreciated.
Click to expand...
Click to collapse
try and older RDS lite that worked for me
rtaylor429 said:
Have the latest version of Moto Drivers and RSD Lite. installed under Windows 8.1 64 bit.
Phone is detect as a media device with factory cable, but in fastboot on the phone I get nothing with RSD Lite. Is there some issue with Windows 8.1? I can get it to detect just fine on a spare Windows 7 machine.
Any pointers or suggestions would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem. Using the USB 2.0 ports in my laptop instead of USB 3.0 ports solved my issue. If that doesn't work and you want to make sure you are completely uninstalling the appropriate drivers and software before attempting a reinstall, try using Revo Uninstaller.
rtaylor429 said:
Have the latest version of Moto Drivers and RSD Lite. installed under Windows 8.1 64 bit.
Phone is detect as a media device with factory cable, but in fastboot on the phone I get nothing with RSD Lite. Is there some issue with Windows 8.1? I can get it to detect just fine on a spare Windows 7 machine.
Any pointers or suggestions would be greatly appreciated.
Click to expand...
Click to collapse
and any reason you dont just use your win7 machine to flash if its working on that one?
asuhoops8628 said:
and any reason you dont just use your win7 machine to flash if its working on that one?
Click to expand...
Click to collapse
Well yeah sort of, I could have done that. However, The Win7 unit is a machine that serves another purpose on my network. It doesn't have any of my phone tools installed on it and didn't want to have to go back and forth between my main rig and this secondary machine. Keeping track of what is installed where gets to be a headache pretty quickly.
RSDLite, is a pretty basic tool, or at least I thought it was. But for the life of me, it just doesn't like Windows 8.1 on my main rig.
I have problem with my OPO.
I try to install TWRP 2.8.6.0 but after that my phone doesn't boot. Nothing work. I hold power button for 2 minutes and nothing.
I do everything like in this guide but it doesn't work. http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
I connect my bricked phone and Windows see it "other devices- unknown device"
I done cmd commands, update driver, select Qualcomm 2012/widnows8/qcmdm/ QDLoader 9008 and after that I have error " Windows found driver software for your device but encountered an error while attempting to install it. This device cennot start(Code 10)"
And it is my problem. I stopped at point 2b in the Guide becouse I can't install drivers.
here is video of that. https://drive.google.com/open?id=0B9...G8tbnNES2VZWG8
Please fast help, becouse I really need this phone next weekend.
Please, can someone help me?
Rebeluch said:
Please, can someone help me?
Click to expand...
Click to collapse
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.
hellcat50 said:
when i bricked my oneplus one, i had similar issues. I had to reinstall windows in order to make it work.
Click to expand...
Click to collapse
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?
Rebeluch said:
Do you pluged phone into USB port and computer can't see it?
Do you reinstalled system to Windows XP?
Click to expand...
Click to collapse
I used windows 8.1
reinstalled windows 8.1 on a new partition
It's now a long time ago so i can't quite remember what problem exactly i had, but I know that it didn't worked and i reinstalled windows and it worked.
Actually one month after I bought my oneplus one i bricked it
have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement
MrxSiN said:
have u tried disable windows driver signature enforcement? becoz after windows 7, driver that doesnt have digital signature are not installed unless u disable the enforcement
Click to expand...
Click to collapse
Yes, I do this in Advanced restart options and click F7. And windows still can't see phone.