Related
the last post tells you the detail
THANX
buzz
Thanks for reply.
Hope for good news
Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks
you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software
The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem
OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.
it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Do you mean that you can choose the Chinese region now?
Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached
buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...
only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.
expecting a perfect WM2K5_160C supproting Simple Chinese.
mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.
WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz
Hello
I have been busy reading this forum and i has been a great help, I have been given 3 phones 2 o2 XDA IQ & a Vodafone V1240 2 of them need repairing new keyboard and casings on them which i found on ebay.
Back to the question is there anyway of changing the boot screens on the xda ia as when it boots it has the welcome to 02 and then a bubble screen could these be changed?? i am running the orignal wm5 but i did flashed it with wm6 rom the beta version but nothing has changed??
Cheers
Brogusblue
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
chribruu said:
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
Click to expand...
Click to collapse
here you go...
plug your phone in. run this program. then go to tools/immediate flash tools...and you should have a function called splash screen or something like that. point to the desired file. update... restart your phone and it should work. with this prog, you can also extract splash screen from a nbf file.
Hello
Thanks, I have plugged the phone in and ran program but i get "No file loaded, immediate flash not available (Client DLL not found)"
Cheers
Brogusblue
Choose, Test Immediate Flash, on your phone, TyphoonNBFtool.dll will prompt you to give it permission to run , allow it
Hello
I am completely confused, Downloaded the file to pc unzipped and ran program and get "No file loaded, immediate flash not available (Client DLL not found)" and that's how far i get the phone does prompt me. i have had a look on my phone and found the file "TyphoonNBFtool.dll"??
Cheers
Brogusblue
You need to extract the archive to a folder first, then click Test Immediate Flash, then TyphoonNBFtool.dll will prompt you to allow access
I would like to modify shellres.dll.040C.mui (french WM6.0). So, I use first ROM Extractor. I enter \windows\shellres.dll.040C.mui in the field "Save to", and ... when I boot again, the device is frozen on the WM welcome page.
I made the same operation a couple of weeks ago but I was thinking that I made an error when editing the file then copy it on the device.
In fact, the problem seems due to the use of ROM Extractor. Copying the file in \windows seems not so good...
So, where should the file be saved ?
i already asnwered before, get a shellress file found somewhere in the forum(will give you a link if found) and just edit it, as its teh same for almost all the devices, then just cab it up and installit in your device
Ok, but I need a french version and ...
... and, for my understanding, I would like to know how to do that with the ROM extractor. Where should the file be saved ?
Help ! Where the file must be extracted ?
Which value to enter in the field "Save to" ?
1. "\"
2. "\windows"
3. "\shellres.dll.040C.mui"
4. "\windows\shellres.dll.040C.mui"
If I choose option 4 (the most logical for me), my device cannot boot (it's frozen on the Windows welcome page) even if I don't modify the file.
040C is a french version.
Anyway, if I get the english version as proposed, where the file must be installed ?
first to post here
as i saw that HP rx1950 has got a Windows Mobile 6.1 Custom ROM..
but my device doesn't have the same language as the custom ROM pack, so i can't update it...
i've searched through the forum and the internet... there had been some ROMs posted,, but the links were dead already
anyone who still have this device, hope u can kindly extract the Stock WM5 English ROM for me
thanks a lot for your help, and sorry for my poor english..
martin
Just upgrade you phone, language of your current ROM doesn't make a difference .
Here is a kitchen ROM of WM 6.1 Classic for rx1950 from xda members Victory144 and Guifort.
http://www.mediafire.com/file/nna2yo92q2beiik/Flasher_Hp_Ipaq_rx1950_ENG_WM6.1.rar
I agree with tomcug. It should flash your ROM to WM 6.1 regardless of the language. You need to use it on a Windows XP computer with ActiveSync installed though...
Here is the original thread for more help:
http://forum.xda-developers.com/showthread.php?t=510764
RumoredNow said:
Here is a kitchen ROM of WM 6.1 Classic for rx1950 from xda members Victory144 and Guifort.
http://www.mediafire.com/file/nna2yo92q2beiik/Flasher_Hp_Ipaq_rx1950_ENG_WM6.1.rar
I agree with tomcug. It should flash your ROM to WM 6.1 regardless of the language. You need to use it on a Windows XP computer with ActiveSync installed though...
Here is the original thread for more help:
http://forum.xda-developers.com/showthread.php?t=510764
Click to expand...
Click to collapse
I've read the post.. there're two methods to flash the WM6.1 ROM, by SD or through USB.. but i failed with a message "Wrong Image" after cloning the image to SD card, and the lauguage problem while flashing through USB with stock update utility (that maybe some lock by HP on language. mine is Chinese Traditional, but the update image is English..)
therefore, that'll be fine if the English Stock ROM is available.. btw, is there any program to flash that bypass the lock??
or how to change the language option of the ROM generated by kitchen?
i am not very familiar to configure the kitchen
thank you for your help
Here is a very technical discussion of 2 methods for installing different language ROMs.
http://www.tweaks2k2.com/How_to/39xxROMlang.htm
You will need a HexEditor:
http://www.mediafire.com/file/6r8ffn1fq3bh9mu/uedit32.exe
And a mtty program:
http://www.mediafire.com/file/7srppxvnr728ime/mtty11a.exe
BUT - at the end of method two when the author says - At the terminal screen type "lnb nk.nb0" at the USB prompt. (That means: Load the ROM nk.nb0)
INSTEAD - use the command "l nk.nb0"
That may be a typo - or the difference in mtty versions used by myself and the author...
thank you for your suggestion, i see that the ROM file structure of 3950 is a bit similar to rx1950, so i will try to change that
i've got the kitchen and the whole system downloaded from the site u suggested, but i just can't figure out how to change the language code of the output file while building the ROM , so that i can fool the ROM Update Utility and flash the ROM to my PDA..
wt's Build_XIP?
do u hv any suggestions? thx again
martin
Build_XIP... I think that is something for a different device. confused
_____
The following is based on research and guesswork. I make NO CLAIM that it will work and not damage your device... TRY AT YOUR OWN RISK.
_____
If my experiments with mtty and my reading of the How to install a different language tutorial are correct, all you need is:
mtty11a.exe to send commands to your iPAQ.
The English WM 6.1 ROM Image (CEOS.nbf) you want to upgrade to.
And Uedit32 to edit the ROM.
Put all 3 files in the same folder. It will be easiest to create a new folder on desktop with whatever name you like.
_____
This is for a Windows XP computer. That is what you have, yes?
First be sure to BACKUP your iPAQ and put all files in a safe place on your PC.
Next - remove the battery and any SD cards from the rx1950. Wait at least 10 minutes for the internal battery to discharge so that the iPAQ is cleared of all memory except the ROM you want to overwrite.
_____
Now we want to save the Chinese ROM you have so we can restore it if anything goes wrong. Best to be safe, yes?
Do you have a spare SD card at least 256mb? If not, use the one you normally have in rx1950... See why we saved all your files first?
Kill ActiveSync by opening Task Manager>Processes. Look on the list for wcesmgr.exe and wcescomm.exe. Highlight each one and click on End Process. With ActiveSync killed you can now "talk" to iPAQ with mtty.
DO NOT PUT IN THE BATTERY. Attach the iPAQ to the PC with the USB cable AND the AC Power Cord. Turn the iPAQ on and manually enter Bootloader Mode. (Google tells me for rx1950 you - press following buttons simultanously
Contacts + Mail + Reset for as long as your PDA boots)
Insert the SD card where you want to save the Chinese WM 5 ROM.
Go to the folder where you saved the 3 files you need and double click mtty11a.exe. That opens a box called "Open port setting." Scroll down the list in "Port" and look for \\\WCEUSBSH001. That is the port you want. I noticed that the end number (001) changes with each use of mtty. Never mind the number so much, \\\WCEUSBSH00x is what you want - that is your iPAQ. Select that port and click on the "OK" button.
It should open a command terminal (white window). Press enter until USB> appears in the window. I only needed to press enter once, but some tutorials say keep pressing until it appears. (?)
At the USB> prompt type r2SD and press enter. This will have mtty command your iPAQ to dump your ROM image onto the SD Card as RAW DATA. Wait for the progress bars on iPAQ screen to finish and you get a completed message.
Save this SD card in a safe place. This is your Recovery Image to restore the iPAQ back to the ROM you started with. The card is not formatted in a way that you can open and read with Windows XP so do not try putting it in a card reader right now - XP will want to format it and we don't want that to happen.
_____
If you need to recover your iPAQ at any point...
Unplug the iPAQ from PC and AC power cords. Remove battery and SD card. Wait 10 minutes to reset memory.
Insert SD card with Recovery Image. Plug in the AC power cord. Turn on iPAQ. Enter Bootloader Mode. iPAQ will see the Image on the SD card and offer you the option to Flash your ROM or exit. Pick the option to flash your ROM.
The iPAQ will Hard Reset after it flashes and then you can remove the SD card with the Recovery Image and do a Restore from the files you saved on PC and/or your regular SD card and the Backup we did at the beginning of this experiment.
_____
Now that we are safe, we can start to try and change the English WM 6.1 ROM so you can flash it to your iPAQ.
I read the "How to install a different language" tutorial quite a few times. Here are my calculations for what we need:
Original checksum
minus HexSum of ENG (45+4E+47 = DA)
equals change value
or
ECEC
-DA
= EC12
HexSum of CHT (43+48+54 = DF)
plus change value
equals new checksum
or
DF
+ EC12
= ECF1
Then that means we change ENG (code for English) to CHT (code for Chinese Traditional) and also change the Checksum from ECEC to ECF1 and we can get the ENG ROM to load on your CHT rx1950.
_____
Now you need to edit the ROM. Go to the folder where you saved the 3 files you need and double click uedit32.exe to open the Hex Editor. Click on "File>Open" and navigate to the folder where you put your files. Select CEOS.nbf and Uedit will open it.
10 lines down (line 00000090h) the file says "..........ENG.hp"
Next line 000000a0h says "iPAQ rx1950...."
This may or may not be the place to change - But I believe it is the right spot to tell any updater program what iPAQ version to update...
Scroll down to line 00000ea0h where it says "..........ECEC^a"
Next line 00000eb0h says ".e^a..........."
I believe that is the ROM Checksum and then an order to verify the checksum from iPAQ...
Scrolling down farther to line 00001ec0h it says " iPAQ rx1950..6."
Next line 00001ed0h says "00.00 ENG......."
I believe this tells any updater program what version is being flashed. But it may need to be changed...
So my best guess is:
At the first spot ENG is listed (line 00000090h) you need to edit ENG to CHT
At line 00000ea0h you need to edit ECEC to ECF1
Make these changes with Uedit32 and then click "File>Save as" and label the file "Test.nbf" saving it to the folder we have been using. (Note that mtty and any files you want to flash MUST be in the same directory.)
In Uedit32 click on "File>Close All Files" and exit Uedit32. Now you have 2 versions of the ROM in your folder...
_____
mtty still open and iPAQ connected?
If not - connect iPAQ as above (no battery or SD card, wait ten minutes, connect with USB and AC power, put rx1950 into Bootloader Mode). Open mtty. Navigate to your port and get a USB> prompt.
At USB> type in "l Test.nbf" (no quotes) and it should try to flash the edited ROM to rx1950.
If it was edited wrong you will get an error message something like "Header request time out."
_____
If it doesn't work that way it shouldn't affect your iPAQ and a Hard Reset should be all you need to restore your system. If that fails we have the SD card Restore Image we made earlier.
Delete the Test.nbf file from the folder and try editing CEOS.nbf again.
Try changing the Checksum and the second time ENG is listed:
At line 00000ea0h you need to edit ECEC to ECF1
At line 00001ed0h you need to edit ENG to CHT
Save as Test.nbf and have mtty "l Test.nbf" again
If it fails, delete Test.nbf
The last try would be by editing the Checksum and both times ENG is listed:
At line 00000090h you need to edit ENG to CHT
At line 00000ea0h you need to edit ECEC to ECF1
At line 00001ed0h you need to edit ENG to CHT
Save as Test.nbf and have mtty "l Test.nbf" again
_____
I hope one of these works for you. Please let us know what happens.
Thanks.
thanks for your suggestions very much!!
but i get the File CRC checksum error when using the stock update utility,
and through mtty.exe, it shows "Header Request Time out" also, in both i changed the first mentioned "ENG" to "CHT", second time and both times ...
all failed
would there any way to flash it through SD (by creating a suitable .nb0 file?) ?
hurray!!!!
i've cheated the HP ROM Update Utility (RUU) to accept to update an English ROM to a Chinese machine !!!
i use WinHex to replace the ENG with CHT, CHT with ENG,, and it's OK now!!!!
anyway, thank you very very very much for your sincere help!!!!!!!!!
Really marvellous!!!
HUZZAH and Congratulations martinhy!!!!!
I'm glad you got it to work.
I was at the keyboard for about 4 hours playing with the files last night and was afraid that my guess was wrong (as it turns out it was). So I'm really surprised and pleased that you solved it.
You just edited the RUU??? All other files in the kitchen folder stay the same???
Cause I need to cheat it and make it change from rx1950 to rx3115... I'll be trying your method soon.
it's troublesome to change ,, or i can say, cheat, the ROM file (.nbf) itself, coz it has checksum .. and the algorithm may be difficult to guess, and changing with different versions of iPAQ,
but the RUU itself doesn't have the integrity check, so it's cheatable
anyway, thx for your effort to help me
i can't be sure whether your guess is wrong, coz when i download the stock ROM, i.e. "l CEOS.nbf" to the iPAQ, through mtty, i also says "header request timed out"..
so i can't be sure whether there's problem for the way to edit the ROM, or the iPAQ doesn't support such mtty method...
or........
. becoz i'm a newbie, maybe i've got something wrong though...
*sigh*
When I try to change the RUU from rx1950 to rx3115 and run the rx1950 upgrade kitchen I get the CRC error...
When I try to change the .nbf and put it in with a rx3115 update package I get 244 Error (model ID)...
When I pull on my hair it comes out in big chunks...
I think I need a lot more study and a new toolkit...
that's maybe quite a challenge to flash ROMs from other models rather than language... both models are not compatible
martinhy said:
hurray!!!!
i've cheated the HP ROM Update Utility (RUU) to accept to update an English ROM to a Chinese machine !!!
i use WinHex to replace the ENG with CHT, CHT with ENG,, and it's OK now!!!!
anyway, thank you very very very much for your sincere help!!!!!!!!!
Really marvellous!!!
Click to expand...
Click to collapse
can you help me do that ? thanks
I've downloaded an unbranded stock UK ROM (i think) for a Nokia 1020 64Gb to replace the O2 rubbish.
It is file
RM875_3051.40000.1345.1003_RETAIL_eu_euro1_212_03_336753_prd_signed.ffu
It was automatically downloaded to C:\ProgramData\Nokia\Packages\Products\rm-875
I try to 'make' Product Support Tools for Store 5.0 find the download. It will not.
Regardless of which folder I place the download in (and alter the supposed location path) all the Recovery Tool sees is the software
already installed on the Nokia 1020 - filename. It defaults to this file.
RM875_059T1Z9_3051.40000.1345.1003_062.vpl
This is the nasty O2 branded crap already on the Nokia 1020 and all it wants to find.
Have I just downloaded another O2 branded rom ?
Dead end and out of ideas.
All answers on a postcard please to Muppet The Wonder Dog.
Do I have to remove something that makes it default to the installed
version of software ?
Thanks in anticipation.
To delete.
anaheiim said:
Use 059T1V6 RM-875 VAR EURO GB CV BLACK and http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
Thank you. Will Do.
Jailbreaking iPhones was never this challenging.
anaheiim said:
Use 059T1V6 RM-875 VAR EURO GB CV BLACK and http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
The download was successful. The 059T1V6 files are downloaded to C:\ProgramData\Nokia\Packages\Products\rm-875. I used NaviFirm+ to download.
Alas, Product Support Tool for Store 5.0 does not want to locate the files. Why ? I have moved the files (and changed the path) to different locations in an attempt to persuade the software to locate the 059T1V6 files. But NO ...it will not.
Every time I try to change the address path to where I've moved the files is adds "\Products" to the path address. Not helpful.
When I create the path it thinks it wants .C:\ProgramData\Nokia\Packages\Products\rm-875\Products...and place the files in this folder..it still refuses to locate the files.
Going round in ever decreasing circles.
Thanks in advance Anaheim.
To delete.
anaheiim said:
No, use Data Package Manager for DL your FW
Here http://forum.xda-developers.com/showthread.php?t=2515453
Click to expand...
Click to collapse
The reason I paid & used NaviFirm+ to DL the FW is the DL worked.
I am unable to get Nokia Data Manager to accept any text entry in any of its fields to start a DL.
I am unable to get Nokia Product Support Tool V5 to see/locate the (apparently) identical FW downloaded via NaviFirm+ to start the 'Recovery' process.
I'm on fully patched W7 (x64)
It's a mystery.
To delete.
Here are the dropbox links screenshots of
https://www.dropbox.com/s/h1f1emb2jyuvexl/Screenshot 2014-06-04 12.24.10.png
and to Nokia Care Suite
https://www.dropbox.com/s/1pz22k5a2kvox9d/Screenshot 2014-06-04 12.27.26.png
Thanks
To delete.
anaheiim said:
If you are in offline mode in the Data Package Manager (and according to the screenshot, you are) you can not DL the ROM.
Similarly for Product Support Tool, why did you connect directly your Lumia?
Follow the tutorial that I provided and you will get there.If you are unable to properly follow the steps (in most it's extremely detailed and with the screenshots), sorry but I can not help you.
Click to expand...
Click to collapse
As I said the problem is not in the downloading of the ROM.
It was very easy in NaviFirm+. I recommend the software for its simplicity and ease of use.
I have identical ROMs downloaded via Nokia Data Package & NaviFirm+.
The problem appears that the data path in Product Support Tool for Store V5.0 appends as a suffix '\Products' to the data download path. This is not the default path given from the Data Package Manager. The path is not user editable. If I create the additional folder and move the files to the folder it says it is looking for.... the Nokia package still fails to locate the FW it is trying to Recover. There are no screenshots to illustrate any error message. There is no error message.
I appreciate that it is very difficult to convey the exact steps in unambiguous English. I have been very fortunate in both multiple JailBreaks and the application of Cyanogen Mod to a collection of Samsungs..
To delete.
all paths added have the sub-folder ' \Products
' appended to the text string. I am unable to edit the path name. Just add another.
See
https://www.dropbox.com/s/vyuowb43rafn80a/Screenshot 2014-06-09 11.21.53.png
When I go to try and set the path via Data Package Manger it does not see them;which ever folder they are placed in.
https://www.dropbox.com/s/mxhjlegdqviqqis/Screenshot 2014-06-09 11.25.31.png
Sorry for the thread necro. I have an O2 1020 64GB as well and want to rebrand it, but for love nor money I can't find from where to download the firmware, all sources are down. Any input is appreciated!
triturbo said:
Sorry for the thread necro. I have an O2 1020 64GB as well and want to rebrand it, but for love nor money I can't find from where to download the firmware, all sources are down. Any input is appreciated!
Click to expand...
Click to collapse
One possibility would be to use thor2 to change the product code on the device, then let the WDRT do its job.