After many many tweaking and cooking ROMs for WinMo I want to do same with Android. The reason I cooked for WinMo was speed, but since it is not an issue with mine Desire(but it can be better I want to customize ROM a little bit, so remove some stuff and later maybe add few apps. If this want be a problem I will try to tweak too.
However in WinMo I have always have served kitchen, I just tweaked removed and add few things and job done but here there are no kitchens..yet(I hope somebody will sooner or later post it
So is there anybody who can help to set up kitchen so that I can cook few roms for me and this community?
So if I understanded correctly I need following to start cooking
android sdk
java jdk
signing tool
stock ROM
I have downloaded them all, extracted SDK in D:\HTC Desire\Android SDK, installed Java JDK in C:\Program Files (x86)\Java and I don't know what to do next?
Extract ROM, where(?), extract system.img which is in rom.zip if yes how and where?
Thanks for your help
Benko, you can extract the ROM anywhere you want. But, you don't want images. You should look at Pauls rootedupdate.zip as a starting point. Unzip that.
eViL D: said:
Benko, you can extract the ROM anywhere you want. But, you don't want images. You should look at Pauls rootedupdate.zip as a starting point. Unzip that.
Click to expand...
Click to collapse
Ok extracted that rootedupdate.zip and found a lot of apks and obexes so after I delete those files that I dont want how to put that all back together to file that is flashable?
You'll have to resign the zip after removing stuff, otherwise it will give verification errors when trying to flash.
You need to remove the current certificates from the file, there are three files in the META-INF folder - delete those, but keep the update script (the COM folder inside), it's needed for flashing.
I use this little thingy for signatures: http://android-dls.com/wiki/index.php?title=Generating_Keys
Hope this helps!
PS-beware of any dependencies between the various apk's and any framework modding that might be needed, otherwise you'll get more fc's than you can carry; I know I did
PS2- if you want a served kitchen, you'll find one over at Modaco, for a CyanogenMod port (a link is posted in a thread here) - see if that suits you're needs.
PS3- check out the Chef Central sticky here, too - it should be easier to get quicker/more accurate info from the seasoned cooks there
benko286 said:
Ok extracted that rootedupdate.zip and found a lot of apks and obexes so after I delete those files that I dont want how to put that all back together to file that is flashable?
Click to expand...
Click to collapse
Rezip the folders: meta, system & boot.img.
Then resign them. You can then transfer it to sd and try to flash. If it doesn't boot, then you have to troubleshoot.
May I know that how to change layout of the home screen?
e.g. HTC sense has news/mail widget where first installed and booted.
Where can I change these settings?
Also , I want to know if I made my own rom, and updated to my desire.
If it doesn't boot or anything, can I updated the rootedupdate.zip from Paul to get the desire back working?
Thanks
eViL D: said:
Rezip the folders: meta, system & boot.img.
Then resign them. You can then transfer it to sd and try to flash. If it doesn't boot, then you have to troubleshoot.
Click to expand...
Click to collapse
kevin612 said:
May I know that how to change layout of the home screen?
e.g. HTC sense has news/mail widget where first installed and booted.
Where can I change these settings?
Also , I want to know if I made my own rom, and updated to my desire.
If it doesn't boot or anything, can I updated the rootedupdate.zip from Paul to get the desire back working?
Thanks
Click to expand...
Click to collapse
Ok zipped those folders(META-INF, system, boot.img) in rootedupdate.zip, used autosign.bat to manually sign that .zip and now it should be flashable?
@Kevin-yes if it is not bootable you can flash Pauls rom again
benko286 said:
Ok zipped those folders(META-INF, system, boot.img) in rootedupdate.zip, used autosign.bat to manually sign that .zip and now it should be flashable?
@Kevin-yes if it is not bootable you can flash Pauls rom again
Click to expand...
Click to collapse
Hopefully. After a few hundred times you'll get the hang of it. ;P
If it boot loops, it won't boot. Try again. Always remember what you're adding and subtracting. Maybe start out with only a couple things.
eViL D: said:
Hopefully. After a few hundred times you'll get the hang of it. ;P
Click to expand...
Click to collapse
OK Since I returned my device to my store because of warranty can you try that ROM, I will upload it for you ?
benko286 said:
OK Since I returned my device to my store because of warranty can you try that ROM, I will upload it for you ?
Click to expand...
Click to collapse
Sure, why did you return it?
Uploading it now
Some very very bad battery leaking...80% in one night and sync was off!
Thank you so much eViL D: and everybody else for help
Ok I also want to create my own rom but I don't know how to sign it..
Any help would be most appreciated.
ROM Link here
http://www.mediafire.com/?zt4ymz42jzj
I hope it works
So for now I even don't need Android SDK?
I downloaded the rom kitchen from Chef Central...Does the rom need to be sign after I built them out in Linux?
Also there are some folders I not understand yet....
Inside system folder - customize, etc, framework, usr and xbin I dont understand yet.
Cause looking at eVil D:'s rom and paul's rom is very different in those. And even paul's rom doesnt have customize folder.
Would like to understand all and see if I can make a rom out.
Thanks
Anybody tried my ROM ?
benko286 said:
Anybody tried my ROM ?
Click to expand...
Click to collapse
Got corrupted DL. Will have to try again.
kevin612 said:
I downloaded the rom kitchen from Chef Central...Does the rom need to be sign after I built them out in Linux?
Also there are some folders I not understand yet....
Inside system folder - customize, etc, framework, usr and xbin I dont understand yet.
Cause looking at eVil D:'s rom and paul's rom is very different in those. And even paul's rom doesnt have customize folder.
Would like to understand all and see if I can make a rom out.
Thanks
Click to expand...
Click to collapse
the kitchen signs the rom automatically. run the menu from terminal ( using linux) and u will see all the what the kitchen is doing.
do not try to compare custom roms ... they are different. some have extrafiles & folders depending on their customisations.
best thing is to compare with an original rom for the desire. and u see what has been added to get X and Y. involves a lot of trials and errors.
eViL D: said:
Got corrupted DL. Will have to try again.
Click to expand...
Click to collapse
I will try downloading too, if it wont work I will reupload it
I know that this can sound wierd but can anybody of you upload his kitchen?
Thank you all for help!
EDIT: File is corrupted, uploading again!
Reuploaded and tested, RAR file is ok
http://www.mediafire.com/?w5wommomzmk
Please somebody try ROM
Thanks
benko286 said:
Reuploaded and tested, RAR file is ok
http://www.mediafire.com/?w5wommomzmk
Please somebody try ROM
Thanks
Click to expand...
Click to collapse
Anybody tried ROM ?
P.S anybody has link to CyanogenMod port, anybody uses that kitchen?
Hey guys, I made a custom boot screen for my synergy ROM, but for some reason it won't work when I put it on my phone. Can someone take a look at it and tell me what might be wrong? I've attached the .zip file below.
Thanks for the help!
.zip:
http://db.tt/R5IP6322
I think it has something to do with the way I am zipping the file... I read something about having to compress it as a "store"?
yes u must compress under store
Inc
I am trying to install rafdroid and the instructions say to " First of all modify the config.txt file in your build folder, with wince=1 or you will be stuck at bootscreen."
I really don't know how to modify it so could anybody help with this?? Maybe some steps on what to download & how to modify it would be helpful. Any help will be appreciated. Help ASAP if able. Thanks.
I've used rafdroid sd builds looong time ago... but i remember that if you use to start android from winmo you must create a text file (withe Notepad), write "wince=1" and save it in to the android folder in the sd-card otherwise it will work only with MAGLDR.
Hi,
I tried to "port" the boot manager
app but I failed (I think I'm not skilled enough...)
So could please somebody edit the attached ini.rc
to make the phone boot from sdcard (/sdcard/bootmanager/rom1 or
something like that). I would put it back in the boot.img and flash
it through recovery to my lg o3d.
The sdcard block is /dev/block/mmcblk1p1.
Hope somebody in this great communiy can help
greets
Nobody?
i have deleted my os on my phone htc one sv boost mobile and cant find the original ruu for it but i found a tar.gz file from htc website and this can put my phone back to stock but i dont know how to install it to my phone remember my phone wont start up to android it has no os on it does anybody know how to do this please lt me know [email protected]
man, calm down
first, i suggest you to look inside that tar.gz file and see (check on forum if needed) if it can be flashed right away
if not, search for some way to convert it into something flashable, then use fastboot.exe (utility that comes with free ADB toolkit) to dead-flash your phone and hopefully drag it back from the world beyond
unfortunately i have no deeper experience, try asking someone else more expert directly
i hope i was useful