I've actually been inspecting my device. I've noticed how this device is "suppose" to be curved, while it is at the bottom, it's not at the top? is this normal?
It's a AUO panel from China.
xamadeix said:
I've actually been inspecting my device. I've noticed how this device is "suppose" to be curved, while it is at the bottom, it's not at the top? is this normal?
It's a AUO panel from China.
Click to expand...
Click to collapse
There have been some cases where a few people said they have straight glass instead of curved. supposed to be the new ones that are straight. Mine is absolutely curved on all sides. Can you take some detailed angled pictures of the top of the glass by the speaker, the sides and the curved bottom? the others that mentioned it seem to have poor cameras and it cant be seen definitively. No one has mentioned flat at the top and curved at the bottom. Maybe a 3rd screen type? what is the manufacture date and 1st 4 of the serial number please?
Well I dont have a camera to take pictures of it however, it feels like as i trace my fingers a long the side of the phone that the curver runs deeper(from top to bottom), almost as if the battery panel is exact with the top(however the bottom is curved)
Manufacturer date is 6/5/2011 and the first of the Serial is SH16
This is a few pics from the other thread. This is the curved version. Does your glass look like these? If you set a sd card on the edge of the glass do you get the gap like in the picture? Thanks. If you do have the flat version, some pics or video would be awesome. I am hoping the flat version fixes all the touchscreen issues many are having. So far nobody has been able to supply any credible pics for some reason
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the link to the other thread. OP got mad and left because people were saying he was lying about having a flat glass. http://forum.xda-developers.com/showthread.php?t=1150174
Related
I had 1 tiny fibre under my screen protector and was going to put on a new one.
So I had some fun!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know if you can see it. But I have full strands of hair in there.
EDIT: Oh my, is there some way for me to scale it down for th forum?
you are too free my fren.... =.="
Doesn't look good...
Try an environment with little dust, eg the bathroom after a shower (humidity helps),
Use sellotape to remove fibres, specks of dust from screen or protector,
Make sure the protector is the right way round (yes, there is a top and bottom for the DHD which are subtly different, as I found to my cost - I think your protector is on upside down, looking at the bottom left corner).
I have never has success reapplying protectors (apart from "during" the first application), whatever the manufacturers say. Easier to buy a new one. A lot come in packs of 2 these days
Yeah I know all this.
When I got my mobile the girl at the shop offered to put on my screen protector and I thought why not! Bad choice... She put it on upsidedown...
So I put on my 2nd one. Then the 1 tiny fiber annoyed me so I took it off and put on ANOTHER one.
But this one was super cheap and didn't fit so I got annoyed and scrunched up the protector, chucked it in the bin but then had an idea to pull some hairs out and be stupid and take a picture.
Time to go buy a quality screen protector!
Bought this screen protector off eBay, the only cheap matte one I could find. Don't fancy paying £10+ to mess it up.
The top quality Japan PET material is imported from Japan : high transparent material and frosted material. Transparency:99%, Anti-Scratch, Anti-Dust.
Click to expand...
Click to collapse
Some photos of it fitted, as you can see the edges don't stick down very well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The case if anyone is interested,
You can't really tell from the images but it does make the text soft and it has a hazy effect like you'd find on a old touchscreen computer. I do like the matte finish as it also doesn't show greasy marks as much.
Overall the cost of £2.39 for 6 I can't complain and it will hold me over until I find a better replacement. I don't want to post the eBay link up but you should be able to easily find it.
This has been my experience with 95% of the matte screen protectors I've tried. The *only* one I've been happy with was an SGP one on my Droid X.
Which case is that you're using?
You're going to have problems with your phones proximity sensor because from the pictures above, the screen protector is covering it.. I would suggest you cut a hole on the top left corner of the protector before application..
With this current setup, your phone screen will not come on whenever you receive a call...
Woah, that looks really nice! I just wish matte protectors didn't ruin the clarity.
I have noticed a really annoying problem with my N5
On the bottom front side, there is this nasty gap between the screen glass and the housing (marked in red in the picture).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It has a diameter of about a third of a milimeter and is diligently collecting dust and dirt. To make things worse, it is nearly not possible to get the dirt out of it again, since it is to small for the fingernails. I always have to use the edge of a paper to clean it up
Does anybody else have this gap?
If not, I'll contact Google to get a replacement.
I don't
stag
Now that you mention it, I believe the "lower" seems a bit wider than the others.
However no dust-collecting at all - at least not more the the other gaps.
Also I never experience much dust-collecting in contrast to many other users. (May be due to using ALWAYS a sleeve when I put it in my pocket.)
Mine is like that to. It's a pain to clean it out.
Mine has the gap on the bottom too... I use a thin needle to remove the parts of dust from there.
I hope LG will assembly the cover better, with no gap, in the future revisions...
I contacted Google Play support and indicated the problem, because I also have the gap at the bottom. I need to use a piece of paper to remove the dust.
I had to send them photos, and now they say that they will replace the phone. Two friends of mine (one got the white 32gb, and one got the black 32gb) dont have the gap, but myself and another friend who ordered the black 32gb on the very first day have the gap. So may be it is a production defect that possibly may be fixed now?
Just contacted Google... replacement unit is on its way
The Google Play replacement service is really great! This is a better service than you could expect from a local store.
Today i received tempered glass from Arktek. Temp.glass have round edge and i dont have problem with dont stick bottom corner. Glass is little bit smaller that screen but that is ok for me after i try few (6,7) temp.glass. Touch responsiveness of the screen is normal. This is one of the better temp.glass i try. In package i received two temp.glass with all you need for install. Very recomended.
https://www.amazon.co.uk/Screen-Protector-ARKTeK-Premium-Tempered/dp/B01D86RGRM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent via LG G5
a good sign!
BrunoSlivar said:
Today i received tempered glass from Arktek. Temp.glass have round edge and i dont have problem with dont stick bottom corner. Glass is little bit smaller that screen but that is ok for me after i try few (6,7) temp.glass. Touch responsiveness of the screen is normal. This is one of the better temp.glass i try. In package i received two temp.glass with all you need for install. Very recomended.
https://www.amazon.co.uk/Screen-Protector-ARKTeK-Premium-Tempered/dp/B01D86RGRM
sent via LG G5
Click to expand...
Click to collapse
the size of this tampered glass is slightly smaller which is in turn a blessing in disguise. It makes it compatible with the variety of phone cases. I had issues with my phone case and the tampered glass protector since the protector covered more area around the edges, which kinda touched the edges of the phone cover and made it (glass protector) come off often.
Horrible
Hi everyone
So i just bought brand new purple poco f2 pro 2 days ago and today i realized there is bunch of dust and particles under the edge of back glass specially in the left side amd bottom of the back glass then i realized i can push the edge of wrapping plastic through that gap so easy for maybe 1mm or so then it stops by inner glues of back glass and it is possible to move those particles under glass but i can't pull them out. This is happens just in left and bottom side of the back glass .... Is that a common problem should i do something ? The purple back glass show those particles on the edges in the some lighting condition i don't know about other colors . But my main concern is it possible for this dusts and particles penetrate more inside the phone and reach to camera lenses ?
this picture should explain what i mean this wrapping plastic did not pushed inside by any hard force the gap is just larger than the plastic wrap ......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello,
I have purple too and i dont have this issue, The rear window is perfectly adjusted and leaves no space
Sorry but i think its a good solution to call the After sales service ?
It certainly is a quality control issue. However, the device doesn't have IP certification so this is kind of expected.