Related
There's plenty who've been expecting it...
It's now available ! And here's the link.
One tiny flaw though, it doesn't look like it's the original HTC-branded cover. But I'll go for one anyway ! Don't forget the silver keypad, since it's not the same as the one mounted on the black version. And for those who'd consider switching from white to black, black fittings are available too.
http://cnn.cn/shop/3600dopod-d810-white-housing-p-1699.html
Enjoy =)
nice find, black too
miomobeach said:
There's plenty who've been expecting it...
It's now available ! And here's the link.
One tiny flaw though, it doesn't look like it's the original HTC-branded cover. But I'll go for one anyway ! Don't forget the silver keypad, since it's not the same as the one mounted on the black version. And for those who'd consider switching from white to black, black fittings are available too.
http://cnn.cn/shop/3600dopod-d810-white-housing-p-1699.html
Enjoy =)
Click to expand...
Click to collapse
But the black one shows the HTC logo, it's a question of ask them if the with one have it.
cheers
anyone know how to change the housing? anyone know where to find maybe a service manual?
thanks.
i'll figure out how to remove the old cover once the replacement covers arrive... i ordered 2, just in case i wanted to switch to the white one.
cortezzi said:
i'll figure out how to remove the old cover once the replacement covers arrive... i ordered 2, just in case i wanted to switch to the white one.
Click to expand...
Click to collapse
excellent, let us know I'd also love to change my white one to a black one
Is there a chance i'll encounter the peeling-off issue known with the black trinities with these covers??
Ooo I've been looking for something like this, delivery is good for overseas too, I think I'll go for a black one, it's a bit expensive though!
I've dropped a message to cnn.cn about the logos on the white version. I'll let you know as soon as I get the answer.
hrm. i'm kindof worried about customs when shipping from US to EU.
i recently paid 65€ custom on a 100$ watch fom japan. ouch!
is there any way to get around that, like marking it as low value or a gift? any EUer ordered from CNN.cn before?
Hajaz said:
hrm. i'm kindof worried about customs when shipping from US to EU.
i recently paid 65€ custom on a 100$ watch fom japan. ouch!
is there any way to get around that, like marking it as low value or a gift? any EUer ordered from CNN.cn before?
Click to expand...
Click to collapse
I think it really depends on your country, even if you're in the EU. Some countries allow a gift duty free, but a retail outlet won't send a package that way. The UK is apparently really sticky about import duties I've heard.
Oh yeah, I also concern about why the white one don't have any Dopod or HTC logo on it
Is that real genuine replacement or just some replica from some cheap material?
i got both the white and black covers; the black is definitely HTC stock. the white one does not have any HTC markings and, there is a notable difference in the color of the front and back covers. i think the white is aftermarket and poor quality (in my opinion). if you get the white cover you should probably get the sliver "D-Pad", otherwise it will look funny. unfortunately, i ran over my device (by accident, stupidity, carelessness) and didn't have a chance to change the covers.
I've just replaced my M700 white cover with the black HTC branded. Man this phone looks so goddamn sexy now it's incredible.
I got the black keypad as well. Silver would have been too garish IMHO.
Hi guys,
Just to let you know that cnn.cn answered my mail and stated that both the front and back covers were HTC-branded.
I'll let you know when I receive them.
Cheers
Black side keys ...
Hi guys,
If we switch to the white which as you said earlier has the HTC logos and the silver keyboard what about the side keys which are black (except the camera which is silver). I think it would be really ... not sexy ... white with black keys.
I have already asked cnn if they also provide white side keys and I 'm waiting for their reply. I' l get back to you when they reply.
Regards, Dimitris.
Ah then those of us with the white to start have one major bonus. The keys are silver and it looks really swish black with all silver buttons. I can see white with black buttons would look a tad sucky.
do the black covers still have the peeling problem?
The Covers Suck
I ordered both the Black and White (with matching keypads), and I have to say that the quality is poor, and not consistent.
For the Black one:
Has multiple brands - CHT and Dopod on the front, and HTC on the back .. would have been better with just one brand;
Internal piece is missing the metal plate;
Plastic moulding is poor (my unit was warped, and not useable);
Back Cover is not provided with rubber plug (on the back for the antenna port), nor the cover for the SD Card;
No buttons provided (i.e. side buttons like the camera, Ok below the scroll wheel, etc).
For the White One:
Colour on the front and back cover differs;
Buttons were provided;
No branding at all;
Cover is not provided with rubber plug (on the back for the antenna port), nor the cover for the SD Card;
Overall, not very happy and believe to be a waste of money.
brandonmm said:
anyone know how to change the housing? anyone know where to find maybe a service manual?
thanks.
Click to expand...
Click to collapse
This thread has a link to a .rar file archive (opens with WinZip) containing a really good MS word doc showing how to disassemble your trinity Click Me!
How to disassembe your Trinity.
I also had to open my black Trinity in order to solve the peeling problem. Because I have seen many users requiring for instructions on how to open their phones I decided to write a detailed step by step tutorial. You can find the guide in this thread
http://forum.xda-developers.com/showthread.php?t=311463
My regards to you all !
I just dropped my diamond by accident while running to my car to avoid the rain =="....
It was in a PDA case, but it still somehow popped out of the case and got scratched up...
So I am in DIRE NEED OF A REPLACEMENT HOUSING!!!
lucky for me, the only damaged parts were the metal rim around the front side of the phone and the battery cover...
I am thinking of just getting an extended battery so i can get a new battery cover with it as well.
But I can't find the Replacement part for the rim around the front of the phone...
I took a lot at the phone and it seems easy enough to replace the rim....but i need to find the part first....
Please guys, any help will be very much appreciated....
Really need this housing replacement...can't stand looking at my scratched up diamond =(
phones still in its early stages so gonna be hard to get hold of housing so quick. Usually best place is here
http://cnn.cn/shop/touch-diamond-c-277_533.html
but they only have screen and back plate at the moment
just be patient a little bit longer.
does that shop deliver quickly??
would it be possible to ask for oem parts directly from htc...?
i talked it over with htc canada today and it may cost upwards 100 CDN to fix the cosmetic damage =(
no insurance?
uh no...i've never insured a phone before....
never thought it would the belt clip would break and let the phone fall and get scratched =="
argh...
any ideas on what to do...
should just take out the rim and touch it up myself ^^"....
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
pizzachips said:
oh i've got an idea =D!!!!
I can buy a dummy phone and replace it directly that way...
right.....?
Click to expand...
Click to collapse
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
the-equinoxe said:
In a very rare occasion you can use dummy phones.
Mostly the inside is completely different, no way of using those dummies for housing parts.
Haven't seen a dummy Diamond yet, so I can't tell if it is usable, but mostly HTC dummies aren't usable.
Click to expand...
Click to collapse
i'm just lokoing to replace the outer rim on the front side of the phone and the battery cover....?
so maybe its possible...
ill drop by a local mall and see if its possible i guess....
loads of dummy diamond phones on ebay the last time i check it out.
i wouldn't say loads...
i saw a total of 4 =P lol
average 20-30 dollars CDN
which is fine for me if i can use it as housing and battery cover replacement
anyways heading out to check the dummy model =)
it doesn't work =(
its one giant piece, so i can't really take it apart to replace the piece i want...
How hard is it to take apart the diamond?
The invisible shield really stuffed up my screen. I can see parts flaked off the screen (looks like a thin protection layer) which is believe is the touch sensor itself. It has not affected the use of the phone but looks ugly.
EDIT: Home from work and did a search and found this: http://www.pdacenter.ru/razborka/razbor-htc-touch-diamond/
Looks like a lot of work to get to the digitizer.
wow amazing find...was looking for a page like this...
aw man...the housing is one whole piece from what i can tell from the last picture...guess a DIY housing replacement is not really gonna be easy....
i'm gonna ask HTC for an estimate....
just minor cosmetic damage on mine on the corners so nothing too huge but it pains me to see it every time =(
at least this seems a bit easier than fixing the iphone....its so much work to put in a new digitizer cause of the way the housing is built
Looking for the Telus Black rear cover
If anyone finds a place that is selling the black rear battery cover for the CDMA version of the phone i would be interested.
anyone have any lucking finding a replacement housing?
I can provide the replacement housing
It cost about 36 euro
Like this??
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=350260913226&ssPageName=STRK:MEWAX:IT
HTC Touch Diamond P3700 Black Rubber Case
Dont buy it sucks.
Bought 2 myself, both are broken in less then 1 week,without letting it drop or even using it. I didnt even use my second diamond it still was broke after a few days
post36 said:
HTC Touch Diamond P3700 Black Rubber Case
Dont buy it sucks.
Bought 2 myself, both are broken in less then 1 week,without letting it drop or even using it. I didnt even use my second diamond it still was broke after a few days
Click to expand...
Click to collapse
Well here i own x2 rubber/ silicone cases & their both fine. Bought them off of ebay & they were cheap 1's (so not like their an expensive version or anything), never had a problem with them, they save my diamond from scratches etc... so I can't fault them here, I can only recommend them
polllux said:
Well here i own x2 rubber/ silicone cases & their both fine. Bought them off of ebay & they were cheap 1's (so not like their an expensive version or anything), never had a problem with them, they save my diamond from scratches etc... so I can't fault them here, I can only recommend them
Click to expand...
Click to collapse
Yeah, I second that. Started with a black one, thats the best. And I've got a 'white' one too, problem with that one is that it's more translucent than white so you can still see the phone through it.
Either way never had a problem with them falling apart. They stretch easily so you don't have to take it off to get the stylus out. Only thing to watch out for is bits of tobacco and crap build up inside it, so I turn it inside out and give it a quick rinse once a month or so.
Overall, 4/5
I own the el-cheapo black one from Dealextreme.com - it cost USD 1.99. It's about three months old and still perfectly fine.
I like it because it gives me much better grip on my phone. I use it a lot on my bike, and that's not a place to use slippery objects.
Have fun!
I ordered the digitizer from deal extreme that was around 30 bucks, it took about 15 days from the day of purchase to when it showed up at my doorstep in oklahoma. Coming from Hong Kong thats about average I think.
The digitizer itself is indistinguishable from the original HTC one, the replacement was not easy but it only took me about an hour and a half. If this was my first phone repair ever it'd probably have taken me 4 hours or so. If you have all the proper tools and have dissasembled a phone before it should be fairly easy and quick. The worst part is that the digitizer is glued to the frame on the nexus with firm pressure I popped the stock one out and replaced it with the new one using loctite brand superglue to affix the new one.
All in all I highly recommend this digitizer and if you have the tools and the time do it yourself I couldn't bring myself to pay someone over 100 bucks to fix my phone.
Cheers for the info, I bought one from eBay which looked identical in the picture. However when I received it, it lacked the bottom buttons and top curve meaning I had gaps at both the top and bottom. Long story short I need to purchase another in the coming weeks and was looking at this one, thanks again
Forgive my extreme noobness here, but digitizer - is it the thingy that's responsible for registering touches on the screen?
DarkDvr said:
Forgive my extreme noobness here, but digitizer - is it the thingy that's responsible for registering touches on the screen?
Click to expand...
Click to collapse
Yes it is. Its top part of the screen that you touch and that part that gets scratched/ broken when people drop it.
Cool!
any change in responsiveness over stock?
ROM_Guest said:
Cool!
any change in responsiveness over stock?
Click to expand...
Click to collapse
It seems to be more responsive than the stock one but I bet when the other one got cracked it lost some response so I don't have anything good to compare it to now.
dowmace said:
It seems to be more responsive than the stock one but I bet when the other one got cracked it lost some response so I don't have anything good to compare it to now.
Click to expand...
Click to collapse
This doesn't fix the multitouch bug does it?
very nice to know its not too expensive to DIY
player911 said:
This doesn't fix the multitouch bug does it?
Click to expand...
Click to collapse
No it does not.
Just wanted to let you guys know
Tonight I replaced the S-LCD for my N1 with an ebay one, and the speaker with an ebay one too.
It was stressful because there was always the chance you could break it. Thankfully it was a success* and I did spend a couple hours applying new BSE and Clarivue protectors too.
Phone feels like new (its only 2 months old btw...) hehe
N1 is a great developer phone truly. In all aspects of the word. I see it now!
*did scrape my bottom "U-cover" ..the one which has the HTC logo. A little teflon peeled at the edge with the plastic pry tools (they're really not too strong though and wore quickly i might add. Recommend using a guitar pick like i saw one guy use on the online videos).
Anyways, short of buying a replacement of the $11 part, I'm really please with this phone
Is it possible to swap the AMOLED screen with an SLCD screen or are there actual hardware differences between the two models preventing that swap?
OJ in Compton said:
Is it possible to swap the AMOLED screen with an SLCD screen or are there actual hardware differences between the two models preventing that swap?
Click to expand...
Click to collapse
Good question. I was going to say "No, because I read it somewhere on the forums that you can't" , but then I found this thread:
http://androidforums.com/nexus-one/...ny-way-backup-wipe-before-sending-repair.html
Turns out the guy sent his AMOLED N1 to HTC to get repaired, and that they changed it with an S-LCD without changing his scratched digitizer.
I'm guessing that they are cost effective and mindful with warranties, so I doubt that they would have changed the whole Mobo for S-LCD functionality.
Again, this is just heresay and postulation.
"Got jacked.. 180 euro and all they did was replace my cracked Amoled with an SLCD... the blacks and gradients on the SLCD are awful. I was told the cover glass came together with the amoled. Mine is a little scratched so that would have been worth the extra $$. I had gone online to look around and found out after I prepaid that the front glass and the amoled are completely separate. My prepaid receipt just stated repair screen... so I could not go after them for not swapping my front glass. Anyways rant over. Very happy to have the phone back but it is not the same without the amoled."
OJ in Compton said:
Is it possible to swap the AMOLED screen with an SLCD screen or are there actual hardware differences between the two models preventing that swap?
Click to expand...
Click to collapse
Hey bud,
I thought about this yesterday, but short of a definitive answer coming through from other devs, i thought I'd offer to mail you my S-LCD (pre-replacement one, with some minor humidity damage, only viewable at an above 39 degree angle)...to you for free* (just paypal me the shipping. It'll probably be like $5 by weight). Let me know.
And now the pristine MAO case has some horrendous chips and scratches, and I'm really pissed off.
I can't seem to find a reliable or legit looking seller on eBay that will sell a genuine MAO case, the new bevelled USB version. I'm based in the UK, but wouldn't mind buying from an international seller that ships to the UK also. Does anyone know of any good eBay sellers selling genuine HTC parts?
Failing that, does anyone know roughly how much it would cost if I were to send it back to HTC to replace it? I asked HTC support but they don't sell spare parts and can't give a quote unless I send the phone first. Any estimate would be great.
Thanks.
Anybody..?
djsubtronic said:
Anybody..?
Click to expand...
Click to collapse
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
el_smurfo said:
I'd say you're pretty lucky the screen is intact. Get some black nail polish and fill in the chips, then put one of the super thin cases/skins on it.
Click to expand...
Click to collapse
The chips are pretty bad. Nail polish is gonna look hideous. Plus the whole point of this phone was to not put it in a case. I'm usually very careful with dropping a phone, this is the first time it's ever happened in my life.
I think I'm just gonna buy a housing off eBay and replace it. And if the housing turns out to be crap (even though they assure it is genuine) then next step would be to insure it and then make a claim.
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
doartest said:
Hi,
I got a MAO back cover from here: http://www.parts4repair.com/htc-one-s-back-cover/
I asked by e-mail and they say it's an original HTC repair part. I received and replaced the cover and it is indeed indistinguishable from the original. I don't know how it will hold out over time, though.
Before ordering the back cover, I asked an authorized HTC repair service in Switzerland about the repair cost; they said 59 CHF for the cover + labor costs. Like in your case, they cannot estimate labor costs without seeing the phone.
I replaced the back cover myself. It is not that difficult, but you lose warranty (there is a VOID sticker you need to puncture). Be careful that the MAO back cover is structurally different from the gray one: under the lower plastic "flap", there is another black plastic piece that needs to be removed before you can pull the phone from the back cover (first unscrew the two black cross-type screws, then pull out the plastic piece).
Good luck!
Click to expand...
Click to collapse
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
djsubtronic said:
Thanks, I knew the difference between the black and gray ones and since mine is black I just want to fix the fact that it's chipped. I'm comfortable with replacing it myself so I might just get it from the website you linked. I just have one question though, can you notice on the replacement cover you ordered whether it has the "new style" beveled USB port? I only want to bother replacing it if it has that USB bevel which indicates it won't have the chipping issue. Other than that, how long have you had it and have you noticed any chipping?
I'd probably fix it myself, it will save money and also won't have to be without a phone.
Click to expand...
Click to collapse
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
doartest said:
I only used it for ~1 week.
Unfortunately, I didn't know about the bevel and did not check. I don't have the phone anymore (it was the S3 version, I sold it and got an S4). If your eyes are better than mine, try looking at these photos:
https://www.dropbox.com/s/u1kq1gdfdrq3zhj/Untitled.jpg
https://www.dropbox.com/s/wmmrv0kgmrmglyr/full.png
I would say that it does not have the bevel, but the quality is not that good. I don't have the full resolution photos either.
Click to expand...
Click to collapse
Ahhh yea those pics are crap. Thanks for your help anyway. I'll think it over and see what I should do.
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
djsubtronic said:
Just thought I'd let people know. I ordered a case from no.1-tech on ebay (Hong Kong based). Only 20 GBP (including postage) and 12 calendar days later, the case arrived. And at the expense of voiding my warranty, I went ahead to swap the case myself at home. It was a lot easier than expected to do.
So far so good. Seems like a genuine part, but best of all, and much to my surprise, it is the newer beveled USB design as well. Either that or a really incredible fake. Part number matched exactly on the case I removed and it had a date stamp also.
All in all, my phone is now brand new again, with the exception of a small chip that I got on the actual plastic portion around the screen. Not much I can do about that short of getting a whole new digitizer which unfortunately only comes bundled with a screen too. Can't justify 100 GBP to fix a tiny chip on the plastic lol.
Click to expand...
Click to collapse
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
evilRafael said:
Thanks for sharing your experience with everyone. I wonder how you even started removing the case, since it has no visible screws. I suppose there are videos out there with instructions.
Click to expand...
Click to collapse
Pop your plastic covers for starters.
dr_rick13 said:
could you please post a link of the eBay page where you got the housing? am looking to replace mine also. thanks
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
el_smurfo said:
Nice work. Does the disassembly require pry tools (which I suck at) or is it all just screws?
Click to expand...
Click to collapse
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
By the way, you can buy HTC void stickers too:
http://www.ebay.co.uk/itm/8-VOID-WA...K_Replacement_Parts_Tools&hash=item337c0261f7
If I ever do need to send it back to HTC under warranty I'm sure those would do the trick
djsubtronic said:
Here's the ebay link:
http://www.ebay.co.uk/itm/Metal-Fra...t=LH_DefaultDomain_0&var=&hash=item2a1ece2c79
Make sure you select the right option from the dropdown. The Europe based S4 black model is "A".
For just the case you can get by without pry tools. You need a T5 torx and a small phillips screwdriver. Once you have the 4 screws removed, apply some pressure on the inner phone assembly that is exposed at the bottom, you basicaly want to push it outwards towards the face of the phone. Obviously be careful with the pushing. It should easily give way as I found it isn't really glued into the housing. You might need a credit card or something to help you ease it out once you have made room with the pushing. I hate pry tools too and had no problem doing it this way. The one thing to be careful about is the plastic assembly at the bottom. Take a good look at how it fits in, so you don't mess it up when putting it back together.
Click to expand...
Click to collapse
how does the lower cover pop off...straight out, like the top?
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
It almost always is for regulatory reasons (less radiation in the dummy head) even though it makes for less signal when "you're holding it wrong". There's an anandtech review showing the antenna placement as well.
el_smurfo said:
how does the lower cover pop off...straight out, like the top?
Click to expand...
Click to collapse
ickedmel said:
I'm really wondering about this also how to take off the bottom cover.. also smurf I have a question for you. It seems like the top contains the WiFi prong. Are you sure the one for cellular signal is on the bottom?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Well for me I slowly pried the gap at the bottom edge. It's got adhesive on the inside sticking it onto that plastic assembly I mentioned earlier, but just keep prying it slowly so the adhesive doesn't get all messed up. It should flip open like a door with the hinges being where the beats logo is, eventually it'll open right out then just pop it out.
Hi guys,
I got similar story and want to replace my housing.
I have the EU S4 black/red model. I think its one of those with the chipping issue, but not much damage, until the drop which cut the top corner to straight 45 degree white line and scratches my finger every time I use it in landscape mode.
Anyway wanted to ask, since you already tried/used it for some time.
Is the eBay one genuine or just a good fake?
Or is the one from parts4repair a better choice?
Also after removing the bottom plastic cover, as I understand it has glue to it to keep it in place. Do I need to replace that on the reassembly or just heating it back and pressing will work with the old one? Or it has something else to keep it in place other than the glue?