Related
Hi,
this is my first thread and I already searched everywhere to get my problem solved. Unfortunately without successso far...
Whatever soundmod I am using, the sound does not change at all on my HTC One XL (evita) with AOKP milestone 2.
First, I tried Viper4Android, installed everything, chose V4A in the sound settings, enabled V4A, chose different IRS files, but whatever I do,
the sound does not change at all, no matter how I change the program's settings. I followed all the installation instructions carefully,
so the program should work fine.
After removing V4A, I tried Noozxoide, installed it, chose it in the settings and enabled it. But there is also no effect on the sound quality at all,
no matter how I adjust the settings in the app.
Lastly, I downloaded some other DSP/equalizer programs like Music Equalizer, but there is no change in the sound when I adjust effects and
settings (enabling, disabling the program does not change anything, all equalizer pre-sets sound identical, extra bass has no effect etc.).
As I use my phone for listening music every day, the sound quality is quite important for me and compared to the Sense with Beats Audio it is
really much much worse.
The sound quality is the only downside compared to the stock rom for me, otherwise I am very happy with AOKP and the rom works very fine.
Does anyone know where the problem might be?
Are there any soundfilters in AOKP that prevent sound mods to work properly?
Any other HTC/AOKP users that have/had similar problems?
Thanks a lot in advance..!
I recently received my OPO and loaded V4A on it done the BT output is low, similar to my N5.
I've found that you seemingly can't change the EQ under Sound -> Music Settings like on the N5. I saw mention of the DSP Manager apk and freezing it, but I don't see one under /system/app/ or /system/app-priv/
Am I missing something support obvious, or can you just not change the Music Effects on CM11S?
I'd rather not have to flash another ROM since I'm quite happy with everything else for the most part.
Sent from my Nexus 7 using Tapatalk
DSP Manager is not included in 11S. Its AudioFX in 11S.
Viper4android works fine.
Working just fine here OP.
BT, Headphones and Speaker are working great.
I used to use Viper4Android for about a week but after flashing volume boost mod which in this link OMG! I uninstall Viper4android and just sticked to the Mod that I flashed along with the stock AudioFX And the Sound now on my OPO is Blazin [emoji106] take it from someone who can't listen to his music unless it's Super clear n bassy too [emoji4]
http://forum.xda-developers.com/showthread.php?t=2835010
http://forum.xda-developers.com/android/software/app-divinebeats-sound-master-phone-sony-t3274355
above link is to a audio mod with both V4A and Dolby atmos, by TheRoyalSeeker
It is not my work i am just sharing it here coz it may work in our roms as it already works in mine.
I have tried it on my phone,
ROM skydragon 6.01
it works except for the sony sound settings,
also if it works on any other rom please post the status
share the joy :highfive:
I hope working with CM13
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
MariocolaAnyPark said:
What do you mean that is working but not the sony settings? So just the viper audio settings? Cause viper4android was already working
Click to expand...
Click to collapse
viper4android , dolby atmos, dolby digital, all these work, visit the post, more options are there
Divine Equalizer not working cm13-MM and Music also
Divine Equalizer not working cm13-MM and Music also not working
vinu.gwen said:
Divine Equalizer not working cm13-MM and Music also not working
Click to expand...
Click to collapse
yeah but dolby and v4a works right, im gonna try for cynapop will update post then
Everyone know Dolby and v4a working in CM13.
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
I have tried this one three different custom CM13's so far and the Divine Equalizer has worked on none of them. I can get V4A working, but only if I install it using the "LoliViper" ZIP. Is there a fix OP or am I just screwed?
@Rub It is maybe you need to change selinux to permissive instead of enforcing?
Dac0908 said:
Flashed this mod with DD+ and it made everything sound garbled without even turning the mods on. All apps seem to work, including Sony player but results are horrible, something is broken there.
Oxygen OS 2.2.0 with Boeffla kernel
Edit: even bigger disappointment is finding out that V4A does not work on OOS. Damn!
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
working on oos 3.0...
Will this work on H2OS?
raghu0421 said:
working on oos 3.0...
Click to expand...
Click to collapse
Just tried it on CyanOxy and yes, short answer would be that it works but results aren't so impressive. Distortions creep in, while bass was lacking before this now is overblown and I can't find a way to tone it down effectively. V4A is hidden somewhere in there but installing regular app doesn't seem to work for adjusting, parallel to that there is so much sound processing that it is insane. Divine eq doesn't respond, two music players also fall apart when skipping songs. Not good. Maybe on some other phone or ROM... so for now, nandroid back and use just clean V4A. Although even that worked better on CM13
New v7.00 seems to work, and also has new approach - base zip with addons and/or apps separately :good:
Nope. Bluetooth is gone after flashing. Sound seems to be better than before flashing it, but with V4A turned off. Turning it on just ruins everything, so there is again too much processing out of users control.
Dolby Atmos is only other visible app and it just has to be turned off or crackling and distortions go over everything
Also volume control is broken, full volume is about on half of the scale, with horrible distortions, then it tones down and going louder again, only with more horrible distortions. Ugh.
Sent from my ONE A2003 using Tapatalk
Any way (.zip) to uninstall the Viper ?
Its pain in $$a to restore the ROM from TWRP
Viper is no problem but all other libs and changes are impossible to remove. Always backup before flashing this kind of stuff, then restore takes only a minute
Razor64 said:
Will this work on H2OS?
Click to expand...
Click to collapse
I'm running H2OS 6.0.1 (V1.4.0) Firmware Version ONE A2005_24_160513 and it's working for me.
All I did was set SELinuxMod to Permissive using the SELinuxModeChanger app and used the Dolby Atmos Remover zip to remove DA mod. Working great with my headphones but haven't tried bluetooth audio yet, which is when I use my phone for music most...
Backup data first!
worst thing to flash. broke both my speaker and headphones. worst sound mod ever madhe.
Yup.
Problem with bad audio was on first OOS3 beta and later it was fixed, and with Dirac HD (whatever that is, sound is ok) on final OOS or V4A (which still plays funny with bluetooth, needs user fixing) - I don't see the point of these mods. They just create more problems, and do sound processing without any user control and cannot be turned off. That is just nasty.
Anyway, it is impossible to make it sound better with some software mods, it is just an illusion. We need better hardware, better DAC, better amplifier to really get better sound. Using OTG, or maybe just in-line headphone amp from FiiO or something similar. Short of that, V4A is more than enough for some tweaks.
Root needed. And always rember to make a backup first.
Make your stylo louder and sound much better
http://forum.xda-developers.com/showthread.php?t=2191223
Not my work so make sure to give thanks where neccisaray.
Download is near bottom of 1st post. If running marshmallow download selinux changer and set kernal to permissive. To solve the no effect problem.
Ive been using this on many devices best sound mod anywhere.
Also go into settings in viper and change ui setting to expert for many more mods.
And so its out there ms631 on h631 mm
There is also an audio fix that you can flash to make the phone louder.
tube517 said:
There is also an audio fix that you can flash to make the phone louder.
Click to expand...
Click to collapse
Sure is. You can replace the mixer_paths.xml file for louder volume. Here's the link:
http://forum.xda-developers.com/android/development/increasing-stylos-volume-t3230127
Dont use other audio mods with viper. Once u learn the advanced ui viper increases volume better than most. Like raising the db level in clarity setting. And some of the gains. Only thing viper dont touch is the earpiece in call speaker. But loud speaker and bluetooth and headphone vols can all be increased from variuos settings
No need for any equalizers or any mods. Viper post says they can cause a no effect and other conflicting issues.
I'm using the Audio fix + dolby.
I just know the viper thread says not to and disable any mods if u have any issues.
I was just throwing it out i got it workin and what i did cause all the threads ive found on stylo no one can get it working
TheMadScientist420 said:
No need for any equalizers or any mods. Viper post says they can cause a no effect and other conflicting issues.
Click to expand...
Click to collapse
It doesn't prevent people from experimenting, though.
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Revenant Ghost said:
It doesn't prevent people from experimenting, though.
http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
Click to expand...
Click to collapse
Not at all. I used the stock equalizer and viper on my g4. Worked ok. Thats what were here to do
On official MIUI, if you just adjust the volume to 50%-60%, everything is fine.
But once you go above 60%, you can easily hear the bass being cut.
So I tried to remove the sound effects that come with MIUI, I have tried including but not limited to the following
- Remove MiSound APK
- Remove MusicFX APK
- Delete everything in vendor/lib/soundfx and vendor/lib64/soundfx
- Changed audio_effects.conf
- Replaced acdb files from Evolution X to MIUI
I used a Magisk module I made myself to do the above, but to no avail. MIUI still cuts the bass at volumes above 60%.
I know that on AOSP, even with the volume turned up to max, I wouldn't hear any bass cut, but I had to use MIUI. So I wanted to ask anyone here if they know of any sound effects that properly remove all MIUI.
I use google translate, there may be some errors, sorry.
Zer0in+ said:
On official MIUI, if you just adjust the volume to 50%-60%, everything is fine.
But once you go above 60%, you can easily hear the bass being cut.
So I tried to remove the sound effects that come with MIUI, I have tried including but not limited to the following
- Remove MiSound APK
- Remove MusicFX APK
- Delete everything in vendor/lib/soundfx and vendor/lib64/soundfx
- Changed audio_effects.conf
- Replaced acdb files from Evolution X to MIUI
I used a Magisk module I made myself to do the above, but to no avail. MIUI still cuts the bass at volumes above 60%.
I know that on AOSP, even with the volume turned up to max, I wouldn't hear any bass cut, but I had to use MIUI. So I wanted to ask anyone here if they know of any sound effects that properly remove all MIUI.
I use google translate, there may be some errors, sorry.
Click to expand...
Click to collapse
Hi did you find a solution yet ???
Salahmello said:
Hi did you find a solution yet ???
Click to expand...
Click to collapse
not at all. But someone told me it's strongly related to the kernel, I thought I'd take a look at it later.