Database Info

Stuck at 3 color bar

I'm having difficulty flashing the rom (There may be an issue with the phone, not sure yet). The phone was at 99% and the upgrade died, I'm stuck at the 3 color red/green/blue with the USB connection. I think there is a way to fix this, but I forget. Can anyone point me in the right direction? Thanks!

alan1974us said:
I'm having difficulty flashing the rom (There may be an issue with the phone, not sure yet). The phone was at 99% and the upgrade died, I'm stuck at the 3 color red/green/blue with the USB connection. I think there is a way to fix this, but I forget. Can anyone point me in the right direction? Thanks!
Click to expand...
Click to collapse
What phone you got... G3, G4 ... CID Locked/Unlocked ?

G3, CID was unlocked a long long time ago. IPL/SPL 2.25 and it says RUU at the top right corner. I should of included the info, thanks for the help!

alan1974us said:
G3, CID was unlocked a long long time ago. IPL/SPL 2.25 and it says RUU at the top right corner. I should of included the info, thanks for the help!
Click to expand...
Click to collapse
Turn the phone off (pull the battery if you have to) and unplug the USB cable. Then turn it back on so its back at the bootloader screen (rainbow color bars screen you saw). Now plug in the USB cable. ActiveSync will NOT connect, but thats fine. You will see USB above the left soft key. Now flash an offical rom (either the Cingular 2.25 found on the HTC website, or T-Mobile 2.26).
Read this thread for details, steps and links:
http://forum.xda-developers.com/showthread.php?t=298613
Once you get back on an official rom, then you can reinstall whatever custom rom you want (but you need to get back to an official one first at this point).

alan1974us said:
G3, CID was unlocked a long long time ago. IPL/SPL 2.25 and it says RUU at the top right corner. I should of included the info, thanks for the help!
Click to expand...
Click to collapse
OK then...
Plug it into the usb, and when the bootloader appears, start flashing whatever rom you like...
Easy, right ?

hmm, it died again at 99% on the upgrade. I can do the official install w/no problem. Maybe I need to go back through the cid unlocker?

alan1974us said:
hmm, it died again at 99% on the upgrade. I can do the official install w/no problem. Maybe I need to go back through the cid unlocker?
Click to expand...
Click to collapse
Please forgive me for stating the obvious but you do know that it is normal to stall at 99% for a few minutes sometimes longer.... What do you mean by "Died at 99%"?

To be honest. You didn't said anything but typical wrong flash case...RUU from custom ROMs to another custom ROM(or having CIDlock probs) is good method for having 3bars relax time.
it's question of the day: what do You mean by "died @ 99%". when i am flashing anything, stalls up to 5 minutes @ ANY percent arent reason to PLUG CABLE OFF,or ANY manipulation on pc, or ppc. if it just stuck forever, its time to turn back to old ROM image, or just any rescue ROM, SO:
revert to old rom with ruu, then install 2 cabs from shelltool, wait 30 secs, reset, turn radio off, plug usb on, and after adding nk.nbf into shelltools directory, and spectacular launching earlier mentioned shelltool, and rtfm od its docs, you may start to do what you've just read.
while flashing DO NOT DO ANYTHING with machines.
After finished operation you will see end so it IS END.
Hard reset.
100% positive flashes, if net is turned off, firewall killed and antivirus turned off. also, remove sd card before flash.
btw, what's your IPL/SPL...

Sorry, I should of been more descriptive. The rom update gets to 99%, then hangs for awhile, then the update application on my computer says that there was a communications error and goes into a recovery instructions. The phone itself stays at 99% until I unplug the battery.
I'll try doing the revert back to old rom in the morning, it's a secondary phone and I left it at work.

I had this problem as well...
I ended up just flashing a stock rom multiple times until it finally took.
I think I had to do it at least 2, if not 3 times before I was finally able to boot the phone.

alan1974us said:
Sorry, I should of been more descriptive. The rom update gets to 99%, then hangs for awhile, then the update application on my computer says that there was a communications error and goes into a recovery instructions. The phone itself stays at 99% until I unplug the battery.
I'll try doing the revert back to old rom in the morning, it's a secondary phone and I left it at work.
Click to expand...
Click to collapse
So, you are experiencing this when trying to flash a stock rom.
Check if the RUU is not corupted. If you downloaded it now, it may also cause this.
Also...restart your PC and don't run anything in the bacground while flashing. Just to make sure.

alan1974us said:
Sorry, I should of been more descriptive. The rom update gets to 99%, then hangs for awhile, then the update application on my computer says that there was a communications error and goes into a recovery instructions. The phone itself stays at 99% until I unplug the battery.
I'll try doing the revert back to old rom in the morning, it's a secondary phone and I left it at work.
Click to expand...
Click to collapse
Also make sure you remove the SD card in your phone if you have one. I've seen flashes fail when SD cards are installed.

Ok, I reloaded the rom. I can't figure out the button rom, there is a screen with a bunch of ???? that come up and none of the buttons do anything. :\ I loaded the wizard love one, which loaded ok. I tried the crossbow reloaded but it hung at 99% again and the application went back into error recovery mode. Maybe I'm just not meant to have it! lol. I don't have the sim or sd card installed atm.

Oh ya, this is probably the most responsive/helpful forum I think I have ever seen.

..removed..

I've tried on a clean machine and still same thing. What happens at 99%? Could the phone itself have issues?

alan1974us said:
I've tried on a clean machine and still same thing. What happens at 99%? Could the phone itself have issues?
Click to expand...
Click to collapse
All the roms will hang at some point towards the end of the flash (official ones tend to hang around 85% or so. The cooked ones hang closer to 99%). This is the point where the final part of the flashing is occuring and I think there is verification that what was written checks out as being valid.
If you can get a rom on and the phone working, and then do a hardreset and that works, then I would say you do not have a hardware issue with your phone (at least not from the flashing side).
BTW: Crossbow Reloaded v1.5 is out now. Please try downloading it and flashing that one (just to see if it makes a difference for you). It is very odd that multiple roms stop at 99% on your like this (hard to say its a bad download).
Sorry, I haven't reread this entire thread, but have you tried this from a different computer? ALso try to turn off any firewall, VPN, or even antivirus software on your computer while you flash to see if that corrects the issue. I think I remember someone trying to go into Safemode one time to do a flash.
Then there is also stand on your head or wave a dead chicken over your head while the flash is happening.... (yeah, I'm grasping at straws on this one )

Lol, thanks. I downloaded the 1.5 and going to give that a wing.

People... pleas read throught the forums!!!
Its so annoying that people asks the same question again and again and again. Dont be so lazy, do your research, search the forum and dont post ST$#"D questions!!!

Gah, error 302 every time. I loaded buttons ROM, unlocked again, tried reloading rom, then BOOM 302! Maybe WM6 isn't meant for this phone.. lol I can load any WM5 or lower and have zero issues.

Technical Think Tank for Bricked G1's

I started this thread as a constructive and positive place for those of us that have recently lost our G1's or ADP's. I am going to document all my settings, Radio version, Firmware, Build info, etc here and hopefully reverse engineer this issue until I have an answer. If anyone has any hardware engineering information on this device it would be greatly appreciated. I'm even willing to host a private forum from my site to work on this.
Thanks everyone for your continued hard work and Haykuro, you're still the man!

-JFv1.43 RC9 firmware (just did this one update, not the radio update)
-1 GB micro SD which was deliverd with the phone
-Google's Developers Edition
-rooted
-sim ulocked
-almost fully loaded about 80 % battery
-everything went fine, the update went fine, restarting, and then no response and always and always the same android screen,
now im trying to crash it by low battery, not by just take the battery out, maybe this'll work (but I dont think so)
don't know anything else

Partioned Fat32/EXT2 1GB SDcard from t-mobile
Flashed RC29 via Bootloader .NBH file
Rooted with RC29
Updated to RC33
Flashed Hard SPL
Flashed JF v1.5 ADP Lucid MOD - did APPs2SD and Dalvik2SD
Flash 2.22.19.26I Radio
Flashed Grafitti Citrus Theme JFv1.50 Beta
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL.

I wonder if the Dream responds to goldcards like other HTC phones do...
That's how we fixed our Heralds, which is how the Elf's got their fix, etc.

ivanmmj said:
I wonder if the Dream responds to goldcards like other HTC phones do...
That's how we fixed our Heralds, which is how the Elf's got their fix, etc.
Click to expand...
Click to collapse
Goldcard as in a specialized SIM?

d474rpr said:
Goldcard as in a specialized SIM?
Click to expand...
Click to collapse
Goldcards as in a specialized SD card

d474rpr said:
Goldcard as in a specialized SIM?
Click to expand...
Click to collapse
You convert a SD card into a Goldcard and the phone will read it and allow the phone to flash ANY NBH file, regardless of CID, etc etc.

MosquitoD4K said:
-JFv1.43 RC9 firmware (just did this one update, not the radio update)
-1 GB micro SD which was deliverd with the phone
-Google's Developers Edition
-rooted
-sim ulocked
-almost fully loaded about 80 % battery
-everything went fine, the update went fine, restarting, and then no response and always and always the same android screen,
now im trying to crash it by low battery, not by just take the battery out, maybe this'll work (but I dont think so)
don't know anything else
Click to expand...
Click to collapse
This has happened to me many times when I didn't wipe (the PHONE ). Take the battery out, place back in and hold Home + Power to get into menu. Type alt + w to wipe, afterwards, alt + s to apply update.zip from sdcard, then Home+Back to restart. The first time loading, it can take up to ten minutes to get past the Android screen (mine took 7-10 minutes), so be patient.
Post back with any results.

ivanmmj said:
You convert a SD card into a Goldcard and the phone will read it and allow the phone to flash ANY NBH file, regardless of CID, etc etc.
Click to expand...
Click to collapse
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.

One detail, when i flashed the new spl I was doing something else and when i check my phone it back to recovery utility windows itself ,it was in 15 20 minute, after that i reinstalle jf1.5 and all worked ok
what this means. if you are flashing your phone and before these process finishes your take out you battery, you can bricking you phone. take patience and wait.
Good luck
ps:i change the final text for sir*mez
sir*mez said:
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.
Click to expand...
Click to collapse

satru said:
One detail, when i flashed the new spl I was doing something else and when i check my phone it back to recovery utility windows itself ,it was in 15 20 minute, after that i reinstalle jf1.5 and all worked ok
what this means. if you are flashing your phone and before these process finishes your take out you battery, you and only you bricking you phone. take patience and wait.
Good luck
Click to expand...
Click to collapse
this happened to the one that bricked.
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL. So yes I guess I bricked one phone but a miracle happened with the other one. the one that flashed properly went into the recovery on its own right after the boot, but not in no 15-20 min wait like you said. you sure need to stop the blaming. i am not blaming anyone for my bricked phone, im just trying to find a solution. you are going to get this locked because of the bickering.

hey sir*mes was no my intentions blaming to anyone , i only want to say that all need to give more time to flash before take out the battery. only that.
i will do something for you , i will change the text, happy?
Good luck
sir*mez said:
this happened to the one that bricked.
Flashed H Special SPL with battery at 89% - saw it update, rebooted on its own, saw the chip with the arrow on it and it rebooted. once after that it hanged. I waited 5 minutes and then took the battery out. Got my sdcard reader, renamed the jf v1.5 to update to reflash like instructed. powered the phone with home+power and got nothing but a hang on t-mobile G1 screen.
Both phones were done the same. One phone bricked and one phone flashed the SPL. So yes I guess I bricked one phone but a miracle happened with the other one. the one that flashed properly went into the recovery on its own right after the boot, but not in no 15-20 min wait like you said. you sure need to stop the blaming. i am not blaming anyone im just trying to find a solution. you are going to get this locked because of the bickering.
Click to expand...
Click to collapse

sir*mez said:
that wont work i just read the write up. In order for the goldcard to work, the g1 has to go into fastboot, which none of our devices can go into fastboot nor recovery. I even formatted a sdcard to start the process but when i got to the fastboot i was so disappointed.
Click to expand...
Click to collapse
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.

Let me be perfectly clear, those of us with the issue of a bricked device from loading the SPL from Haykuro are experiencing an actual case of being bricked.
Read carefully.
The phone WILL NOT turn on!!!!
We are looking for a solution that runs as far back as actually burning the SPL image directly to the phone's memory. I am even willing to try a hardware to hardware method to accomplish this.
I know the phone is still somewhat responsive because my laptop detects the USB connection to the phone but it will not recognize the device.. obviously because the communication is broken since the phone is dead. The power LED will turn on but only after I remove the battery first. Once I press the POWER key the LED turns off and will not light again until I remove and replace the battery.
Solutions that we are trying:
GoldCard method.
Looks like a couple of us have tried this but since fastboot can't see the device then we can't use this method unless someone knows something super seceret.
Crashing the device by allowing the battery to fully discharge. Unlikely but trying anyway.
Any other ideas?????
Thanks everyone for helping thus far!

neoobs said:
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.
Click to expand...
Click to collapse
I tried it and so far no luck...

neoobs said:
So what harm would it do to try? From what I remember the goldcard on herald was supposed to get us into the bootloader even when we couldn't normally.
Click to expand...
Click to collapse
ok but the phone wont go into bootloader. which is what im trying to get it to do. if i get it to bootloader i know i can fix it. even if it went to the recovery i could fix it. but I get nothing.
in order to create a goldcard for the dream it has to read the sdcard off fastboot which i cant get into.

d474rpr said:
Let me be perfectly clear, those of us with the issue of a bricked device from loading the SPL from Haykuro are experiencing an actual case of being bricked.
Read carefully.
The phone WILL NOT turn on!!!!
We are looking for a solution that runs as far back as actually burning the SPL image directly to the phone's memory. I am even willing to try a hardware to hardware method to accomplish this.
I know the phone is still somewhat responsive because my laptop detects the USB connection to the phone but it will not recognize the device.. obviously because the communication is broken since the phone is dead. The power LED will turn on but only after I remove the battery first. Once I press the POWER key the LED turns off and will not light again until I remove and replace the battery.
Solutions that we are trying:
GoldCard method.
Looks like a couple of us have tried this but since fastboot can't see the device then we can't use this method unless someone knows something super seceret.
Crashing the device by allowing the battery to fully discharge. Unlikely but trying anyway.
Any other ideas?????
Thanks everyone for helping thus far!
Click to expand...
Click to collapse
Are you saying your screen doesn't turn on?

neoobs said:
Are you saying your screen doesn't turn on?
Click to expand...
Click to collapse
No, I'm saying it doesn't turn on.

d474rpr said:
No, I'm saying it doesn't turn on.
Click to expand...
Click to collapse
The same happens on Heralds when the imgfs is messed up. To fix it, we force it to go into the bootloader mode and it does turn on. I wonder if it's something similar.

I meantioned in the big main topic an idea though I dont think anyone saw it.
In the past for other phones I was able to make recoveries using the computer while it was in the boot loop.
Anyone with the brick, try to see what happens when you do this:
adb remount
After the "T-Mobile G1" screen shows up. See if it says mount sucessful. I would try though it does not stay on the screen too long for me, not only that it might work for me just because it continues fine so its inconclusive.
If you get lucky and it says remount successful, you could try this:
adb shell recovery
I am not sure of the commands to follow from there, but it might allow you to flash a different update.zip file from the command line. If you get lucky like that, look up the commands and see how that might go. There has to be a way to communicate to the hardware when that screen comes up. Its good that that screen comes up, because it means its not 'fried' so to speak, it just has a misconfigured loader which doesnt have the correct set of instructions (good point about the different types of boards, thats most likely the issue) for THAT board. I would go back to the one that worked previously.

Evo Shift Stuck In Boot Loop Please Help!

Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06img that I found on here on the root of my card, and it will never load it up.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!

Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk

Rooster85 said:
Seems to me you aren't rooted and that's more than likely your problem, boot into fastboot and use the ruu application for gingerbread.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!

samcrac said:
While I am pretty sure I am not rooted, if you are talking about the early RUU release; 1.17.651.1, the application starts and then ends up failing in the beginning of the process. Is this what you are talking about? The drivers should be all good, the application starts to flash and then dies though. Thanks!
Click to expand...
Click to collapse
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Sent from my Supreme Shift

notsointeresting said:
Use the new RUU. But make sure your SD card is formatted to a FAT32 partition. (Stock 2gig sd card and some other store boughts are not)
You can format on your computer and then place the RUU on the root of sd card again
(Bootloader won't recognize the ruu zip if not partitioned)
Click to expand...
Click to collapse
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???

samcrac said:
Ok, I just did this, everything updated fine and all completeted on the bootloader. It then said "press power to reboot." I did so, and went right back into the same boot loop. Any other ideas. I figured running this, and the RUU.exe on the computer were the sure fire ways to get this thing working again???
Click to expand...
Click to collapse
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible

notsointeresting said:
So just a little information.
you said your not rooted?
So that means you have no ability to flash anything because you have no custom recovery and the bootloader isnt unlocked (S-on)
So what DID you do before it bootlooped? there had to have been something you were trying to do.
Not trying to blame anything on you at all just want to make sure we are helping the most accurate way possible
Click to expand...
Click to collapse
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!

samcrac said:
No I hear ya. I was sold the phone fairly cheap and was told "all you need to do is to reinstall the RUU, that is all that is wrong." Obviously I was skeptical, but when I checked everything out, everything looked good, and again, for the price, I knew it was a gamble. That being said, I'm sure something was tried in order to modify the phone and this is how it got like this.
I have soft bricked my old Evo 4g a handful of times and an RUU or Rom flash would always solve the problem.
Anyway, there is no custom recovery, and I'm pretty sure theres no root because it is still "S-ON," I am just trying to see if anyone here has any more info before it goes in for repair.
The only last thing I would guess you MIGHT be able to do is to install a custom recovery, but is there ANY way to do this by just being in the bootloader and using FASTBOOT USB? Any more help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)

notsointeresting said:
It shouldn't have a custom recovery if it shows s-on.
I don't see why the RUU wouldn't work.
Honestly it doesn't sound like a softbrick- sounds like its just bricked (Which ive only heard of 1 Shift getting bricked completley)
Click to expand...
Click to collapse
Make it 2! Thanks for your help though!!!

Also Stuck In A Bootloop
samcrac said:
Hello,
I have an Evo Shift stuck in the boot loop. As soon as I put the battery in all it does is reset itself to the screen with the white background and green "HTC" logo, and will keep restarting until the battery dies.
If I hold volume down and turn it on, it does go into the bootloader, but picking ANYTHING, such as recovery or factory reset, does nothing but sending it back to the HTC screen.
I have tried flashing the RUU.exe (2.27.651.2) through Fastboot USB and it completed successfully, but it just restarts right back to the HTC screen. I have also put PG06IMG that I found on here on the root of my card, and it will load it up (I'll see the blue loading bar and then the brown loading bar in the top right hand corner of the screen), but it then checks it again, and then goes back to the original screen for the bootloader.
Are there any other solutions anyone can think of? They would be much appreciated. I see a lot of these threads for regular Evos, but not for Shifts.
The only other thing I really know about the phone is that it is:
S-On
Hboot- 0.98.0001
Radio- 1.08.00.0506
Thank you so much for all of your help!
Click to expand...
Click to collapse
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.

Ok .. HERE'S THE SOLUTION:
First off all if your S- ON it means you are NOT rooted
If you get stuck in a bootloop .. don't worry it can be fixed.
What you need to do is download PG06IMG.ZIP and place it on your sd card, you can access your sd card by going into recovery then mount section, then usb. This will allow you to move the file from your computer to the root of your sd card.
Once you do this be sure you back up any info you don't want to lose. Once you have the file in place, go back to fastboot ( hold vol down and power) it will read file and when it asks you to update press vol up. It will take a few minutes to update this will revert your phone back to stock but if you have an old recovery it will not do a full restore, it will only update the rom.
Once you get your phone back to working, I recommend updating your recovery by downloading Rom Manager and flashing the latest clockwork recovery. This problem happens usually due to an old recovery.
One other thing you can try if you do NOT want to reset your phone, you can try flashing a new kernal.
Sent from my PG06100 using Tapatalk

RUU won't work if your stuck in bootloop ..
Sent from my PG06100 using Tapatalk

If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
flylike2kites said:
I'm trying to resolve a very similar problem as him, but I know of the history of my phone (since I'm the only owner), so hopefully an answer for me can assist him also.
The Story: One day, I'm playing Uno HD (downloaded from Android Market). I toss out a Draw 4, and then I see: "Google Infrastructure Failure" and a Triangle with an exclamation mark. I reset the phone, and it starts up fine. Then a few hours later, my phone randomly restarts itself into the bootloader screen after trying to reload the home screen (because the memory manager is overly aggressive).
I see no HTC Screen. It goes straight to the bootloader without any input. If I plug it to the charger from an off state, the amber light comes on, and 10 seconds later, bootloader screen. With a battery, it appears automatically after 45 seconds.
Fastboot can read my memory card just fine. It's already been re-formatted as FAT32 in my pitiful attempt to try to repair it. It's checked and read a PG06IMG file I placed on the SD Card's root, went through the entire process of reading it, but it doesn't ask me if I want to upgrade. It takes me back to the original screen. (Maybe I'm loading the wrong file).
Recovery and Factory Reset immediately restarts the bootloader after showing me the skateboarding android splash screen.
I've also tried to flash the newest stock RUU for it. (2.76.651.4), but after the RUU sends the command to start up in bootloader mode, the phone shuts off. Thus giving me the connection error.
(Maybe if someone could rewrite the .exe file to not send out the command to begin loading as if it was in the bootloader screen, it could work. I'd pay for that.)
Other Stuff:
ROM: Stock Sprint Gingerbread OTA ROM. I've been living the vanilla life. No root access. No funny stuff. Just a stock phone with apps (Third Blade, Uno HD, ASTRO File Manager, ect...)
Directly from bootloader screen:
SPEEDY XA SHIP S-ON
HBOOT-0.98.0001
RADIO-1.08.00.0506
eMMC-boot
April 11 2011, 22:32:34
Is there a way we can flash a file from the SD Card which will turn off the security and/or temp/perm root it? (forgive my noobness for such a question)
EDIT: I'm referring to a way that's outside of the adb push method. My device can't be found, and the device won't get past the bootloader screen, so that method doesn't help me too much. However, I do have the ADK Installed and the ADB Command Line works fine.
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk

Also if your phone can't be found its b/c you need to put it into diag mode .. ##DATA .. if you need more help google
tech-9 said:
If you want to root your phone use visionary to temp root then use shift rr .. you can then flash a custom recovery which is essential to avoid this from happening again
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Sent from my PG06100 using Tapatalk

For the thread starter, the person that sold you the phone probably tried writing to the system partition with s-on. Since you can get to the bootloader, see if you can get into recovery. If you can, recovery can be seen in adb, even the stock recovery. From there, gingerbread root, plenty of guides out there, make sure you flash the misc.img, download the froyo downgrade zip (that pgimg09.zip or something like that, just search for it, but not with the numbers I just gave, those are made up.)
From there either flash the gingerbread zip or ruu, and goon with a unrooted life. Or follow one of the many guides to froyo root, and live the life of the rooted. Your choice.
For the second person with a similar issue, the same method will work for you (assuming you can get to recovery), gingerroot, froyo downgrade, and since you like being unrooted, just ruu or zip back to gingerbread.
Solution found enjoy, and just think, if root hadn't been discovered for gingerbread, you would be screwed right now, make sure to thank otaking.

I have the same boot loop problem. I tried using the PG06IMG.zip file and fastboot/bootloader screen says I have the wrong image. It's most likely because it's for 2.2 and I have 2.3. I also don't have any recovery. Is there a PG06IMG.zip for 2.3 or the like?

similar problem here
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54

zdavidzz said:
i'm fairly certain i tried recovery with the wrong or corrupt or incomplete PG06IMG.zip on my first attempt. i got the right one from here http://forum.xda-developers.com/showthread.php?t=1255474
i ran it, says update installed, but when i reboot i still get the loop
from bootloader
SPEEDY XE SHIP S-ON
HBOOT-0.93.0001
RADIO-1.07.00.1129
eMMC-boot
Nov 15 2010, 13:19:54
Click to expand...
Click to collapse
Try downloading the zip again and re run it. Possibly a bad download?
Sent from my PG06100 using Tapatalk

also adb is telling me device not found. i think i might have to factory reset. is that crazy?
---------- Post added at 01:31 PM ---------- Previous post was at 01:27 PM ----------
and... that didn't help

i'm downloading the zip again right now.
since i have s-on, will i be able to install it though?
i can get the file on the root of the sdcard with an adapter since i can't push from adb. and i can't temp root the phone because if i try a normal reboot i get this stupid boot loop. is there a way to get s-off through hboot on the phone?
i don't know why i didn't notice that first file was messed up, it was only 6MB.

[Q] Android won't boot...

Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!

kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you try flashing factory images?

ryukiri said:
Did you try flashing factory images?
Click to expand...
Click to collapse
Yeah, that was what I flashed :/

If you can get into fastboot you "should" be able to flash stock images... Obviously this will revert any root and you will need to flash TWRP/CWM recovery after.
I assume you have a Windows PC with fastboot/adb setup and all drivers etc..
- Download latest "stock" hammerhead images (I cannot post links due to XDA rules... so: "developers.google.com/android/nexus/images#hammerhead"
- Extract the .tgz archive contents on your PC into a folder
- Boot the N5 into fastboot and plug USB cable from phone into your PC
- Go to the folder with the extracted files and run the "flash-all.bat" script on Windows
**Hopefully at this point your device will start to respond.. I.e, on fastboot screen, at the bottom you will see "writing" or something, as the script runs on the command window on your PC.**
If this works, you should be able to reboot once complete and then wait to see if you can get back into your phone.. then you can fastboot again and flash custom recovery, and then whatever rom.
If however you have a hardware issue (i.e, even after the above process it fails) then I am not sure what you could do... I guess ensure it has a complete charge. If you can get into fastboot and the buttons are responsive then it should not be a faulty power button.
Hope this helps :good:

Have you tried a simple factory reset? Reason I ask is it was working fine so sounds like something needs "flushing out" clear cache etc.

kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you choose the right model and firmware before you flash in WugFresh NRT?

The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.

howard bamber said:
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
Click to expand...
Click to collapse
Hello! I am apologize for that I didn't read the OP carefully. This happened to me once in that particulary way, but it was immediately after flashing. OP says that it happened suddenly, without reason. So now I am the one, who doesn't read, right? Sorry for that.
Regards, Zagor

Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.

kyle313 said:
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
Click to expand...
Click to collapse
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.

theesotericone said:
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
Click to expand...
Click to collapse
I was actually able to relock the phone.
Luckily I called google and they're going to send me a replacement.
If anyone else has any other ideas, I'll still take them...I'd rather not be without a phone for the next week!

You won't be without a phone - they are sending a refurbish unit to you , putting a block on your credit card and waiting for you phone to arive at them. Once that happens they will release the funds.

Cannot boot in any mode

I might have completely bricked Desire S, so I need some expert advice.
Long story short. Rooted phone long ago, but I cannot remember if it was S on or off. I was running Cyanogenmod 10 I think, with no problems.
However, I thought I would check for an update from settings, choosing any. So it found a nightly update and I said why not. It downloaded the update, restarted and nothing happened.
Since that moment, I cannot start the phone in any mode, normal, recovery or bootloader. I just get the HTC logo then the screen goes black.
I tried plugging it in the laptop, installed adb drivers and everything, thinking that I might be able to flash from Windows. The phone is seen while on with that black screen, however, cannot send any command as it says is offline.
So I am stuck but refuse to think that it might be gone forever
Any ideas would be much appreciated.

foxthemad said:
I might have completely bricked Desire S, so I need some expert advice.
Long story short. Rooted phone long ago, but I cannot remember if it was S on or off. I was running Cyanogenmod 10 I think, with no problems.
However, I thought I would check for an update from settings, choosing any. So it found a nightly update and I said why not. It downloaded the update, restarted and nothing happened.
Since that moment, I cannot start the phone in any mode, normal, recovery or bootloader. I just get the HTC logo then the screen goes black.
I tried plugging it in the laptop, installed adb drivers and everything, thinking that I might be able to flash from Windows. The phone is seen while on with that black screen, however, cannot send any command as it says is offline.
So I am stuck but refuse to think that it might be gone forever
Any ideas would be much appreciated.
Click to expand...
Click to collapse
Pull the battery out try going into bootloader again.
Sent from my HTC Desire S using XDA Free mobile app

You have no idea how many times I did that. The only way to switch off the phone at this state is to take out the battery.