So I'm running Heinz 57 6/22 release, with OTB kernel 1.6 and my voltage control app settings are not saving through a reboot.
I've tried clearing app data and re installing the app.
Sent from my SCH-I500 using XDA App
We had this issue with 1.6 when it first came out. Try appling for now. Then go back in and apply to boot three of four times and see if that works. That's what I had to do to get it to work. If that doesn't get it then might be a different issue
Tap-a-Talked from my Mesmerize
Have you tried tegrak?
Sent from my SCH-I500 using XDA App
No, always used Voltage Control.. is there another version of OTB TW kernel out?
Sent from my SCH-I500 using XDA App
cpfeifer said:
No, always used Voltage Control.. is there another version of OTB TW kernel out?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Go look on the fascinate dev forum. Theres a bunch of different versions available.
akellar said:
Go look on the fascinate dev forum. Theres a bunch of different versions available.
Click to expand...
Click to collapse
I just looked again, I only saw 1.6 as the newest version, is there a older version that works better?
Sent from my SCH-I500 using XDA App
cpfeifer said:
I just looked again, I only saw 1.6 as the newest version, is there a older version that works better?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
The OP has at least 3 different versions linked.
I'm running tegrak ultimate on my phone and it's running just fine. In fact better than voltage control. I tried both.
Sent from my SCH-I500 using XDA App
you might try wiping voltage settings in recovery and redoing the boot saving in voltage control, also i use the voltages posted in the heinz forum post with bfq scheduling and conservative...I am experiencing amazing battery life...like 3 days or more depending on how much i talk...very nice
Daemontrain said:
I'm running tegrak ultimate on my phone and it's running just fine. In fact better than voltage control. I tried both.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
what tegrak settings you using?
To the op. Nem said 1.6 would probably be the last froyo based kernel he does for otb sadly .
Related
So I was just browsing in the Fascinate's android development forum and saw this title: EC10 Voodoo Kernel.
They haven't been heavily tested, but IRC seems relatively content with them. Mind you, these were never meant for the Fascinate, but the Mesmerize.
Click to expand...
Click to collapse
So I hope these do work, I'm doing a nandroid backup now to test it I will update once done.
Link to post: here
Update: I just installed the Voodoo kernel, cleared my dalvik and cache, and rebooted. It took forever and there is an silver "android" logo ontop of our USCC banner (if your still running the stock boot animation) but it boots just fine I have had no boot loops, I reenabled Voodoo lagfix and got the following scores with a slight response speed up.
Quadrant: 1601, 1435, 1569, 1559
I'm going to leave it the scores are like 150 more than before so I guess I'll take it until the full Voodoo kernel built off source comes out.
Its the same on we have already just for fascinate
Sent from my SCH-I500 using XDA App
What explains the slight increase in quadrant numbers?
Swyped using USCC Mesmerize
those are the same scores Ive been getting with the old voodoo installed on EC10
The same for me
Sent from my SCH-I500 using XDA App
I see I was only getting like late 1300s early 1400s. Never mind I guess lol.
Swyped using USCC Mesmerize
jt has been busy tonight so I'm sure he will release the true voodoo soon (= It looks like he's build a few tests so anytime now..
I can barely wait lol.
Swyped using USCC Mesmerize
cpfeifer said:
I can barely wait lol.
Swyped using USCC Mesmerize
Click to expand...
Click to collapse
It's out in the fascinate forums. I will get it mesmerized.
Jt has released a kernel that works for us on fac forum with bln voodoo sound and color and undervolted
Sent from my SCH-I500 using XDA App
fasc. voodoo w/sound from mes source
agreed about the one for fasc... i just loaded it to my mes. No quadrant differences but i sure do have voodoo sound again
Hells ya and bln
Sent from my SCH-I500 using XDA App
Btw home button is doubled as back button but its cool
Sent from my SCH-I500 using XDA App
i finally decided to start flashing stuff from the fasc forum. i decided it i can always odin back right? or am i wrong?
plsports said:
i finally decided to start flashing stuff from the fasc forum. i decided it i can always odin back right? or am i wrong?
Click to expand...
Click to collapse
Do not flash stuff from their forum. The EC10 voodoo kernel was built to be generic for this specific purpose, plus it was built off of our source so it works fine. IF you start flashing their other kenel's you will drop off us cellular's service and be in a whole heap of trouble, and no nandroid's don't always bring you back to normal.
be patient and only flash what's been recommended, if you start going off the chart's don't expect help from us as we have warned you .
EC10 voodoo kernel posted by JT yesterday/today does in fact work on our phone, we're not sure if the market will see us as verizon or not but it seems everything else is compatible. Stay tuned!
well good thing this is the only thing i jumped on then. thanks for the heads up as always greatly appreciated!
The only stuff NOT built from the mesmerize source drop is the rfs drivers. Feel free to use the kernels folks
Sent from my ADR6400L using XDA App
I knew that already thanks jt you the man brother
Sent from my SCH-I500 using XDA App
dcow90 said:
It's out in the fascinate forums. I will get it mesmerized.
Click to expand...
Click to collapse
It is generic so it will work for the Mes as I'm sure you saw in jt's earlier post.
Jt has posted an updated version that fixes the home button issue.
Sent from my SCH-I500 using XDA Premium App
I thought I saw a mod around for LED notifications using the back lights of the soft keys, or was I just imagining things? I have Cyanogenmod 7.0.2. Please and thank you.
Sent from my Xoom
Smokexz said:
I thought I saw a mod around for LED notifications using the back lights of the soft keys, or was I just imagining things? I have Cyanogenmod 7.0.2. Please and thank you.
Sent from my Xoom
Click to expand...
Click to collapse
You need to flash a kernel that supports bln (back light notification) and then download the paid app "bln" from the app market.
Sent from my Nexus S using XDA Premium App
OuncE718 said:
You need to flash a kernel that supports bln (back light notification) and then download the paid app "bln" from the app market.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
or free app.... the paid version has more features; recommended to get paid if you're going to use it
OuncE718 said:
You need to flash a kernel that supports bln (back light notification) and then download the paid app "bln" from the app market.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Question, this kernel can be found at? Will this affect my experience with CM7?
Sent from my Xoom
Smokexz said:
Question, this kernel can be found at? Will this affect my experience with CM7?
Sent from my Xoom
Click to expand...
Click to collapse
Netarchy's 1.3.0.X+ above kernels have it. And yes it will affect your experience with CM7..... affecting in a positively way. It's so much better than the stock kernel.
It has support for Voodoo Color, Voodoo Color, BLN and a lot of other goodies.
http://forum.xda-developers.com/showthread.php?t=936219
NOTE: When you flash a newer version of CM7 afterwards. You'll have to flash the kernel after flashing CM7 as well because flashing CM7 replaces your kernel with the stock kernel.
zephiK said:
Netarchy's 1.3.0.X+ above kernels have it. And yes it will affect your experience with CM7..... affecting in a positively way. It's so much better than the stock kernel.
It has support for Voodoo Color, Voodoo Color, BLN and a lot of other goodies.
http://forum.xda-developers.com/showthread.php?t=936219
NOTE: When you flash a newer version of CM7 afterwards. You'll have to flash the kernel after flashing CM7 as well because flashing CM7 replaces your kernel with the stock kernel.
Click to expand...
Click to collapse
Thanks, so I shoud keep the file in my root at all times no?
Sent from my Xoom
AAAAAAAAAAND my wifi doesn't work... wtf?
Smokexz said:
AAAAAAAAAAND my wifi doesn't work... wtf?
Click to expand...
Click to collapse
What kernel are you on? I don't understand how your wifi doesn't work. Did you reboot your phone and try it again?
Sent from my Nexus S using XDA Premium App
OuncE718 said:
What kernel are you on? I don't understand how your wifi doesn't work. Did you reboot your phone and try it again?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Well I know I flashed the newest one ( the experimental one) dunno which one though, I just flashed my backup, got
http://forum.xda-developers.com/showthread.php?t=949292
Works great, and I tried the BNL, pretty cool gotta get used to it and I also like this kernel cause apparently it has godly battery life?
Also recommended and not mentioned is the "No LED" app from the market... works by highlighting one or two pixils of the screen...
I never needed to mess witht the backlight stuffs... But still Netarchy's kernel is very worth it..
Smokexz said:
Well I know I flashed the newest one ( the experimental one) dunno which one though, I just flashed my backup, got
http://forum.xda-developers.com/showthread.php?t=949292
Works great, and I tried the BNL, pretty cool gotta get used to it and I also like this kernel cause apparently it has godly battery life?
Click to expand...
Click to collapse
So is your wifi working now or?
Sent from my Nexus S using XDA Premium App
OuncE718 said:
So is your wifi working now or?
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Yep. Working fine.
@thisoneguy I just tried the No LED app and it is amazing. Serves the purpose. Hope it is not a battery hogger.
Cheers for that mate.
I've been using NoLED for approx 3 months and I've not experienced any issues with battery drain. It's a great app.
Cheers
Maksy
Smokexz said:
Yep. Working fine.
Click to expand...
Click to collapse
Well glad to know that you found the solution to your problem.
Sent from my Nexus S using XDA Premium App
OuncE718 said:
Well glad to know that you found the solution to your problem.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
You and me both.
Sent from my Nexus S
R.I.P.
So we just flash this? Will it work if I'm using Humble 1.6?
Sent from my SCH-I510 using xda premium
Will it work with eclipse honeycomb?
Sent from my SCH-I510 using XDA App
DirgeExtinction said:
So we just flash this? Will it work if I'm using Humble 1.6?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Yes and yes.
Will this wipe my phone on GB? I just wanna know if I should back everything up first
Bobaboo said:
Will this wipe my phone on GB? I just wanna know if I should back everything up first
Click to expand...
Click to collapse
Will this tweak wipe anything out? No.
Will the recovery for GB cause your phone to wipe? Maybe depending on what recovery you have. Last I remember there was a fix for that, I dont have GB therefore I am not to sure.
It works on humble 1.6 but the boot animation is black. Just wait for a few minutes on the black screen and it will boot normally.
Sent from my SCH-I510 using Tapatalk
elucid said:
It works on humble 1.6 but the boot animation is black. Just wait for a few minutes on the black screen and it will boot normally.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
Whattt? Now its humble breaking the boot animation? Jeez. I have no idea why.
Is this fine for gummy froyo 2.0?
Sent from my SCH-I510 using XDA App
Feedback anyone? Many downloads and no feedback.
Yes JSA... Read my first post, it works with everything.
ForeverSupra said:
Yes and yes.
Click to expand...
Click to collapse
Did one of those yeses apply to my question regarding Eclipse 1.3.1 Honeycomb?
ForeverSupra said:
Feedback anyone? Many downloads and no feedback.
Yes JSA... Read my first post, it works with everything.
Click to expand...
Click to collapse
I just rebooted to check and yes, there's no boot animation anymore for Humble 1.6
Flashed fine on Imnuts ep1w rom/kernel. Not really seeing any difference though.
ForeverSupra said:
Feedback anyone? Many downloads and no feedback.
Yeah seems to work great. Flashed in CWM, using the latest Ep1W rom. What exactly does this do? I already have loopy smoothness and V6 installed, just wasn't sure what else it does beyond that.
Click to expand...
Click to collapse
@droidnewb2000 yes it works but itll break the boot animation, I dont know why it does it.
@phillthedrill this replace the binary files with files from Honeycomb which are more responsive, the files are app_process and system_server.
@Grillrd sorry you dont see much of a difference. I notice a huge improvement and so does my girlfriends Inspire 4G and friend Infuse 4G.
@DirgeExtinction thanks for the feedback, I have updated my first post to let everyone know.
Confirmed working on EE4 Gummy2.0 with imoseyons 9/8 kernel
Works fine for me in Humble 1.6, and my boot animation is still there.
Sent from my SCH-I510 using XDA App
blarrick said:
Confirmed working on EE4 Gummy2.0 with imoseyons 9/8 kernel
Click to expand...
Click to collapse
It made my gummy 2.0 useless. It made the lock screen lag so bad and when i unlocked my wallpaper flashed om the screen and it went to a black screen with a notification bar.
Sent from my SCH-I510 using XDA App
scarygood536 said:
It made my gummy 2.0 useless. It made the lock screen lag so bad and when i unlocked my wallpaper flashed om the screen and it went to a black screen with a notification bar.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Damn man, sorry to hear that but it seems like your the only one it caused this problem for. Ive tried this many times... The most i can say is wipe, install the rom and let it fully boot up. Then flash fugu. This tweak is universal and MANY people without charges use this tweak without problems.
I'm running Humble 1.51 with Voodoo and Super Charged V6, so my phone already feels snappy. However, I ran Linpack prior to flashing. My scores ranged from high 15's to low 16's. After flashing, Linpack consistently gave me scores in the 18 sec range. That is with NO overclocking, as I'm using the PBJ kernel. This was an easy to use, worthwhile mod imo.
Sent from my SCH-I510 using xda premium
I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Sent from my HUMBLE by Danalo1979 using XDA App
JihadSquad said:
I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Sent from my HUMBLE by Danalo1979 using XDA App
Click to expand...
Click to collapse
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."
spc_hicks09 said:
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."
Click to expand...
Click to collapse
So there is nothing I can do to the kernel to make it stick?
JihadSquad said:
So there is nothing I can do to the kernel to make it stick?
Click to expand...
Click to collapse
Honestly I have no idea.
spc_hicks09 said:
If you're using the free version of Tegrak, your settings will not stick when you reboot. You have to have to the paid version to be able to "set on boot."
Click to expand...
Click to collapse
Wrong. On Imoseyon's kernel there's a command you can use to permanently use Smartass on startup. Look around for it in the thread. That, or you can modify the starting script for the kernel, but I have no idea where it's located.
Sent from my Droid Charge running Infinity Beta
Go Into terminal emulator...type "su" then enter, then type " enable smartass" then enter.
Reboot your phone and you should be fine.
Sent from my VooDoo Gummy Charge
kvswim said:
Wrong. On Imoseyon's kernel there's a command you can use to permanently use Smartass on startup. Look around for it in the thread. That, or you can modify the starting script for the kernel, but I have no idea where it's located.
Sent from my Droid Charge running Infinity Beta
Click to expand...
Click to collapse
Uhh I'm not wrong. To begin with, he was asking about the APP, in which I said "the app won't keep the settings if he's using the free version." THEN when he asked if there was anything he could do to the KERNEL, I said I didn't know.
My device is incompatible with this rom when I try and download emulator.
Nevermind.
Does anyone has the link to this rom can't find it anyware or just a clean mirror ?
Sent from my SPH-D700 using xda premium
bfitzpatrickd2d said:
Does anyone has the link to this rom can't find it anyware or just a clean mirror ?
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Which ROM?
spc_hicks09 said:
Uhh I'm not wrong. To begin with, he was asking about the APP, in which I said "the app won't keep the settings if he's using the free version." THEN when he asked if there was anything he could do to the KERNEL, I said I didn't know.
Click to expand...
Click to collapse
...no he's not. Read the OP.
Sent from my Droid Charge running Infinity Beta
Humble 4.22
Sent from my SPH-D700 using xda premium
kvswim said:
...no he's not. Read the OP.
Sent from my Droid Charge running Infinity Beta
Click to expand...
Click to collapse
So you mean this part?
JihadSquad said:
I am using IMoseyons 3.1.0 kernel with humble 4.22 ROM. I went to terminal emulator and turned on smartass and rebooted. tegrak told me i was running smartass. I rebooted again, and i was back to ondemand.
How do i get smartass to stick?
Click to expand...
Click to collapse
Ok, went back and read the OP. Still the same conclusion. He was asking about the app. I told him you can't do it with the APP. Therefore I answered his question. When he asked, "is there anything I can do with the kernel?" I said "I don't know."
Once again, I was NOT wrong. You can argue your point all you want but I'm done arguing with you.
I have lurked here for a while and read....a lot. When I decided to take the plunge, so to speak, I read some more. From rooting with SuperOneClick, to flashing my first kernel (sms-t959v-kj6-v0.1.1-rcc-unsigned-update) to get CWM, to my first ROM (VALHALLA.final), to my first theme (blue/transparent for Valhalla) to my current kernel (sms-kj6-v0.2.0), it has been entirely painless, flawless, even. Many thanks to all those who put in the effort to make it so simple for me. I will miss many, but Whitehawkx, bhundven, Tehgyb and DoeblerDan, my hat is off to you. Apologies to those I missed.
Now to my question. With the above configuration, any suggestions for further additions or modifications? I mostly use my phone for internet, SMS etc on T-Mobile. Oh, and gaming.
Sent from my SGH-T959V using XDA
You could always add adrenaline shot or scrolling tweak
Sent from my galaxy s 4g using XDA app
Are they mutually exclusive? I am just beginning to have a vague understanding of what each mod does, and none of how it does it. Classic noob.
Sent from my SGH-T959V using XDA
Not sure what you mean by mutually exclusive but you can use them together or separate
Sent from my galaxy s 4g using XDA app
falcons2 said:
Not sure what you mean by mutually exclusive but you can use them together or separate
Sent from my galaxy s 4g using XDA app
Click to expand...
Click to collapse
Its a statistics term. It basically means "can they both be used at the same time"
Sent from my SGH-T959V using xda premium
Another thing to consider is trying antonx's kernel. It has voodoo sound built in and all you have to do is install the free app from the play store.
eollie said:
Another thing to consider is trying antonx's kernel. It has voodoo sound built in and all you have to do is install the free app from the play store.
Click to expand...
Click to collapse
I got antonx's kernel. Voodoo works great. Thanks, and to antonx as well. I'm trying to use tegrak, and plan to use the settings he posted for download. When I try to load the overlook module, I get a driver mismatch error-1. In tegrak, the driver version is listed as unknown. Ideas?
Sent from my SGH-T959V using XDA
If you installed his oc/uv kernel - use the free version of tegrak. You don't load the driver as is supported by the kernel.
I'm using -antsvx-v1.1.2 and the free version on Valhalla final. I thought I read in the thread that it supports Voodoo and oc/uv.
Sent from my SGH-T959V using XDA
OK. Self correcting. Tegrak only works with the no oc / uv version. Downloading now. Thanks.
Sent from my SGH-T959V using XDA
The free tegrak works with the oc/uc supported kernel. The paid tegrak app works without oc/uv kernel support. And with oc/uv kernel support there is no need to load the module.
OK, I need to start from scratch. Unless I made a mistake, I tried both kernels with the free version and got the same result. In both cases, I was prompted to load the module by the application. I'm going to delete both kernels and d/l again. Do I need to do any wipes between kernel flashes?
Sent from my SGH-T959V using XDA
Haha... apologies. I just realized I was talking about Voodoo Sound.
Use the paid version. AntonX's oc/uv kernel has preset values and he recommends using a different app with it. I use his non oc/uv kernel and have no problem loading the module. You need the paid version to set on boot.
I personally use Voltage Control.
You can get my recommended values in Hebrew Valhalla 2nd post.
P.S
Hebrew Valhalla is Valhalla Final with A.S, scrolling tweak and a few more candies. If you don't change locale to Hebrew it works on English. Actually I think most of this ROM users don't speak Hebrew...
Sent from my SGH-T959V using xda premium