I down loaded Imnuts CWM, PBJ with voodo kernel and the SD card fix to my EE4 Charge. Everything went well and I have root until I noticed that the card wasnt, being read by the computer. Turned the phone off and then back on and now I get the stock lock screen, was running launcher pro and then I get sorry messages that application Luancher Pro ( process android. process.acore has stopped unexpectedly. I am also getting these messages for any app I download from the market, apple keypad, widget pro, etc that they have stopped also, i do a force stop but it doesnt seen to matter. I cant get past the lock screen. I have tried rebooting from the recovery screen and no luck. The phone also wont mount to the computer to reflash it. Any ideas or help how to get past this. I also deleted some of the bloatware prior to this problem (rock band, golf, block buster etc). Right now the phone turns on and goes to the lock screen slide the puzzle piece and then get the messages can't get past that.
Do you think if I downloaded a diffent ROM to the card directly from my computer and put a different rom on the card and then opened the zip file and installed from recovery will get me out of this or what about a reset.
Thanks for any help.
Demoscrapper said:
I down loaded Imnuts CWM, PBJ with voodo kernel and the SD card fix to my EE4 Charge. Everything went well and I have root until I noticed that the card wasnt, being read by the computer. Turned the phone off and then back on and now I get the stock lock screen, was running launcher pro and then I get sorry messages that application Luancher Pro ( process android. process.acore has stopped unexpectedly. I am also getting these messages for any app I download from the market, apple keypad, widget pro, etc that they have stopped also, i do a force stop but it doesnt seen to matter. I cant get past the lock screen. I have tried rebooting from the recovery screen and no luck. The phone also wont mount to the computer to reflash it. Any ideas or help how to get past this. I also deleted some of the bloatware prior to this problem (rock band, golf, block buster etc). Right now the phone turns on and goes to the lock screen slide the puzzle piece and then get the messages can't get past that.
Do you think if I downloaded a diffent ROM to the card directly from my computer and put a different rom on the card and then opened the zip file and installed from recovery will get me out of this or what about a reset.
Thanks for any help.
Click to expand...
Click to collapse
I suspect your issue is one I went through.
You said you have the voodoo kernel, right? Sometimes, if the external sdcard doesn't mount in time, voodoo creates a folder in the internal rom memory named /sdcard. When the real sdcard mounts, it gets mounted in /mounts/sdcard. The apps that look there have no issues, the ones that just look for /sdcard but only find the voodoo related one puke and cause issues.
I think Imnuts has some terminal commands you can check/run to fix it, but I also fixed mine by using root explorer, going to the "/" folder, finding he "/sdcard" folder, then checking in it to see if it's the real external sdcard, or the voodoo created one. (hint:, the voodoo created one will have nothing in it but the /voodoo stuff).
If you're sure it's the voodoo stuff only folder, just delete and reboot. Should fix it. For extra safety, backup your external sdcard contents before messing around with this...just in case.
P.S. - You might get crap from some folks for posting this in Development rather than general; you might want to ask a moderator to move it for you.
Moderator, please move to general questions thanks
Did that fix you?
I am a little further along but not where I should be. I have been able to get past the lock screen and disable launcher pro. I have the phone working and email etc. But the unit itself is very laggy and I get continous force stops from calender, google apps etc. I went and did a CWM reboot and checked the vodoo file and it says that vodoo is disabled it will not let me enable it, is this normal? At this point I have a functioning phone but it is nowhere near were it should be with all these force closures and the lag.
I also cannot down load anything from the market and it seems all of the apps I installed through market are doing force stops even if they aren't opened. I have also been able to get the phone and the card to show up when connected to the computer.
This is my first android phone and after spending weeks reading about this stuff I figued I was ready to root, I guess I was wrong.
Still stuck and dont have any idea where to go from here.
Should I reboot and install the voodoo kernal again. Can I just install a different ROM like GummyCharged from a zip file and can I do it with or without lagfix enabled?
It really seems like the phone reset itself to stock and some part of it doesnt like PBJ kernal with voodoo lag fix.
Thanks for any help
Do you know how to use adb? If so, start up an adb shell session and run the command "mount" (no quotes). Paste back the ouput here, but you're basically looking to see if your stuff is mounted as RFS or ext4.
If you're not familiar with adb, get a terminal app from the market and just do the same thing from the terminal app.
Flashing another ROM will probably get you going, but make sure to wipe/reset (this will delete all your data on the phone, but not the sdcard).
Have you pulled the sdcard out and looked at its contents on a computer? Is there a voodoo folder on it? Is there a file or subfolder named "disable-lagfix" in it?
Got it working, downloaded Gummy Charge and everything is back in working order.
Thanks for your imput.
Related
Hey there hope this is the right place for this ... Just want to report something that has happened. I am currently unable to use the G tablet stock vanilla TnT... any clue as to why this would happen? I dont really use it anyway however should this be resolved? and would it affect the tablet in the long run if not addressed? I use Launcher pro and the tablet forces itself to that when "home" force closes. I would like to try the TnT lite however am not confident about it.
Do i need to root the device before i hold the power button and vol +? to flash the new rom ( it bugs me that this is all i have to do to put in a custom rom. it seems to easy, unless it is that easy)
Will i lose all the files, PDF's, and documents that i have on it once i flash the new rom ?
As you can see im a noob to Android. Thanks for advice and guidance in advanced and patients.
Follow the instructions in the alternate gtab firmware post. It worked great for me. I would suggest installing cwm so you can back up your existing firmware.
My update would force close during download on the stock firmware. I finally got it to work by minimizing the pop up that displayed the progress. For some reason the screen would crash the download.
Your files should be there but you will lose all user settings and installed apps when you do the factory reset.
This is a common issue with stock, and TnT Lite. The user data seems to be very unstable once you upgrade to different firmware.
The "easiest" thing to do is just wipe the user data. However, if there is certain data you need to keep, I would recommend the excellent Titanium Backup. The only caveat is that the device has to be rooted, to use it.
roebeet said:
The only caveat is that the device has to be rooted, to use it.
Click to expand...
Click to collapse
And Z4root does this easily. Just install and click "root".
RyuFDAC01 said:
Hey there hope this is the right place for this ... Just want to report something that has happened. I am currently unable to use the G tablet stock vanilla TnT... any clue as to why this would happen? I dont really use it anyway however should this be resolved? and would it affect the tablet in the long run if not addressed? I use Launcher pro and the tablet forces itself to that when "home" force closes. I would like to try the TnT lite however am not confident about it.
Do i need to root the device before i hold the power button and vol +? to flash the new rom ( it bugs me that this is all i have to do to put in a custom rom. it seems to easy, unless it is that easy)
Will i lose all the files, PDF's, and documents that i have on it once i flash the new rom ?
As you can see im a noob to Android. Thanks for advice and guidance in advanced and patients.
Click to expand...
Click to collapse
Tntlite is that easy I was surprised. Too since rooting my HTC hero a year and a half ago was so much more hands on
Hey guys.... first off thanks for the advice it worked great it was easy to do... flashed TnT lite and was excited.... i attempted to pull an app from freewareloversDOTcom and was stuck in downloading status for some time even with a good wifi signal... This is where all hell broke loose ....the file i wanted never downloaded.... then the pic gallery forced closed then the launcher forced closed and had to shut down now now its in bootloop....I attempted to power and vol + but nothing happened in fact got a triangle !.... what is needed now.....
LOL at the entire situation this was my fear..... please if someone with extreme patients can list or point to a noob friendly thread on what i need to do
i have a microSD card can that be used read somewhere that i may need that.....
I thank you guys VERY VERY MUCH appreciate this
Hey guys.... first off thanks for the advice it worked great it was easy to do... flashed TnT lite and was excited.... i attempted to pull an app from freewareloversDOTcom and was stuck in downloading status for some time even with a good wifi signal... This is where all hell broke loose ....the file i wanted never downloaded.... then the pic gallery forced closed then the launcher forced closed and had to shut down now now its in bootloop....I attempted to power and vol + but nothing happened in fact got a triangle !.... what is needed now.....
LOL at the entire situation this was my fear..... please if someone with extreme patients can list or point to a noob friendly thread on what i need to do
i have a microSD card can that be used read somewhere that i may need that.....
Click to expand...
Click to collapse
I had a similar problem twice today (installed TnT Lite 2.02 and ran into boot loops). Here's how I recovered. Results may vary, so use at your own risk:
1. Download the vanilla restore from http://forum.tegratab.com/viewtopic.php?f=6&t=16 (this is just to get the recovery\console file unless you want to manually create it).
2. Download the updated stock TnT from http://forum.xda-developers.com/showpost.php?p=9362168&postcount=35
3. Extract the "recovery" folder from gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1.
4. In the recovery folder there is a file called "command" with no extension. Open this file with a text editor (eg. notepad) and edit the line so "SDCARD" says "SDCARD2" instead. Save it and ensure you do not add any extension. It should look like this:
--update_package=SDCARD2:/update.zip
5. Rename the "update-smb_a1002-2967-user.zip" from step 2 to "update.zip".
6. Copy the entire recovery folder with the edited "command" file from step 4 and the "update.zip" from step 5 to the root of your MicroSD card. It's important that the contents on the root of your MicroSD ends up with:
/update.zip
/recovery/command
7. Put the MicroSD in your gTablet.
8. Power on while holding the Volume Up button until you see a message regarding recovery.
9. You should see a graphic showing package box with a progress bar after a short time.
10. Wait until it completes and the unit will restart.
11. If all goes well, you should be back to stock TnT with the last OTA update.
If you are wondering why I just didn't use the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, it's because it didn't help me. I initially used the same general method above with the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, but my gTablet still continued to boot loop. After a fair amount of panicking and looking over all of the threads here, I found that gtab_full_vanilla_system_2010_11_09.zip added ClockWork Recovery so I was able to use this to copy over the update-smb_a1002-2967-user.zip to my internal SD, install it, and get my gTablet working again. When the problem happened the second time, I used the method above and it worked for me.
Hope this helps. Good luck.
dcom222 said:
I had a similar problem twice today (installed TnT Lite 2.02 and ran into boot loops). Here's how I recovered. Results may vary, so use at your own risk:
1. Download the vanilla restore from http://forum.tegratab.com/viewtopic.php?f=6&t=16 (this is just to get the recover\console file unless you want to manually create it).
2. Download the updated stock TnT from http://forum.xda-developers.com/showpost.php?p=9362168&postcount=35
3. Extract the "recovery" folder from gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1.
4. In the recovery folder there is a file called "command" with no extension. Open this file with a text editor (eg. notepad) and edit the line so "SDCARD" says "SDCARD2" instead. Save it and ensure you do not add any extension. It should look like this:
--update_package=SDCARD2:/update.zip
5. Rename the "update-smb_a1002-2967-user.zip" from step 2 to "update.zip".
6. Copy the entire recovery folder with the edited "command" file from step 4 and the "update.zip" from step 5 to the root of your MicroSD card. It's important that the contents on the root of your MicroSD ends up with:
/update.zip
/recover/command
7. Put the MicroSD in your gTablet.
8. Power on while holding the Volume Up button until you see a message regarding recovery.
9. You should see a graphic showing package box with a progress bar after a short time.
10. Wait until it completes and the unit will restart.
11. If all goes well, you should be back to stock TnT with the last OTA update.
If you are wondering why I just didn't use the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, it's because it didn't help me. I initially used the same general method above with the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, but my gTablet still continued to boot loop. After a fair amount of panicking and looking over all of the threads here, I found that gtab_full_vanilla_system_2010_11_09.zip added ClockWork Recovery so I was able to use this to copy over the update-smb_a1002-2967-user.zip to my internal SD, install it, and get my gTablet working again. When the problem happened the second time, I used the method above and it worked for me.
Hope this helps. Good luck.
Click to expand...
Click to collapse
Dude thank you so much for your effort in this !!!!! gonna try this as soon as i put my baby to sleep.... will let you know if this worked for me
dcom222 said:
I had a similar problem twice today (installed TnT Lite 2.02 and ran into boot loops). Here's how I recovered. Results may vary, so use at your own risk:
1. Download the vanilla restore from http://forum.tegratab.com/viewtopic.php?f=6&t=16 (this is just to get the recover\console file unless you want to manually create it).
2. Download the updated stock TnT from http://forum.xda-developers.com/showpost.php?p=9362168&postcount=35
3. Extract the "recovery" folder from gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1.
4. In the recovery folder there is a file called "command" with no extension. Open this file with a text editor (eg. notepad) and edit the line so "SDCARD" says "SDCARD2" instead. Save it and ensure you do not add any extension. It should look like this:
--update_package=SDCARD2:/update.zip
5. Rename the "update-smb_a1002-2967-user.zip" from step 2 to "update.zip".
6. Copy the entire recovery folder with the edited "command" file from step 4 and the "update.zip" from step 5 to the root of your MicroSD card. It's important that the contents on the root of your MicroSD ends up with:
/update.zip
/recover/command
7. Put the MicroSD in your gTablet.
8. Power on while holding the Volume Up button until you see a message regarding recovery.
9. You should see a graphic showing package box with a progress bar after a short time.
10. Wait until it completes and the unit will restart.
11. If all goes well, you should be back to stock TnT with the last OTA update.
If you are wondering why I just didn't use the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, it's because it didn't help me. I initially used the same general method above with the gtab_full_vanilla_system_2010_11_09.zip downloaded in step 1, but my gTablet still continued to boot loop. After a fair amount of panicking and looking over all of the threads here, I found that gtab_full_vanilla_system_2010_11_09.zip added ClockWork Recovery so I was able to use this to copy over the update-smb_a1002-2967-user.zip to my internal SD, install it, and get my gTablet working again. When the problem happened the second time, I used the method above and it worked for me.
Hope this helps. Good luck.
Click to expand...
Click to collapse
You mind if I steal these directions? It's more detailed than the one I wrote up on my TnT Lite post. I'd like to post it there (specifically the command file, as some people have issues understanding the "SDCARD2" change).
And thanks for posting your experiences to help the other users here!
roebeet said:
You mind if I steal these directions? It's more detailed than the one I wrote up on my TnT Lite post. I'd like to post it there (specifically the command file, as some people have issues understanding the "SDCARD2" change).
And thanks for posting your experiences to help the other users here!
Click to expand...
Click to collapse
Please do if they look to be correct. Hopefully we'll see confirmation that these instructions work.
I appreciate all your work on the gTablet!
dcom222 said:
Please do if they look to be correct. Hopefully we'll see confirmation that these instructions work.
I appreciate all your work on the gTablet!
Click to expand...
Click to collapse
Same here Roebeet thanks for your work...dcomm222 thanks again... So I tried to only install the TnTlite 2.0 from the microsd card, it read it, looked to have loaded it, and it went right into the bootloop again.... I really want TnT lite ......
so now i am going to try your method... fingers crossed
RyuFDAC01 said:
Same here Roebeet thanks for your work...dcomm222 thanks again... So I tried to only install the TnTlite 2.0 from the microsd card, it read it, looked to have loaded it, and it went right into the bootloop again.... I really want TnT lite ......
so now i am going to try your method... fingers crossed
Click to expand...
Click to collapse
I had no luck trying to re-flash to 2.0X once I got in the boot loop - I couldn't get past it no matter what until I went back to stock. Once I was back at stock I could re-flash to 2.0X from the internal SD. I'm still trying to figure out what's getting me in the boot loop - everything seems to work great for a while.
Good luck!
dcom222 said:
I had no luck trying to re-flash to 2.0X once I got in the boot loop - I couldn't get past it no matter what until I went back to stock. Once I was back at stock I could re-flash to 2.0X from the internal SD. I'm still trying to figure out what's getting me in the boot loop - everything seems to work great for a while.
Good luck!
Click to expand...
Click to collapse
GOT IT BACK!!!! geez man I was full on panic mode
have you flashed back to TnT lite back yet and how long does it last? Damn i am so tempted to go back im thinking it has something to do with what we attempted to load on the tablet ... i dont know just looking for a reason to Flash ....can this constant recovery flash do any damage to the tablet? I would like to try other Roms but dont want to mess my tablet up..
BTW i got this EUL when it rebooted especially sections 4.1 and 4.2 wtf!!! sorry about that but that is how i felt
Thanks again guys!!!!
RyuFDAC01 said:
GOT IT BACK!!!! geez man I was full on panic mode
have you flashed back to TnT lite back yet and how long does it last? Damn i am so tempted to go back im thinking it has something to do with what we attempted to load on the tablet ... i dont know just looking for a reason to Flash ....can this constant recovery flash do any damage to the tablet? I would like to try other Roms but dont want to mess my tablet up..
BTW i got this EUL when it rebooted especially sections 4.1 and 4.2 wtf!!! sorry about that but that is how i felt
Thanks again guys!!!!
Click to expand...
Click to collapse
If I remember correctly, the stock firmware with the OTA update will prompt you to accept a license and prompt to set the time, etc....
I just flashed the TnT 2.02 again. So far it seems OK, however it did the first 2 times I did it as well. I followed all of the instructions at "forum.androidcentral.com/showthread.php?p=442691#post442691" except I substituted using roeboot's TnT. Once I did it I had everything working (flash, market, etc...). Both times the boot loop happened when I tried to install or uninstall something, and both times were after a few hours of use. I tried a third time and almost instantly got into a boot loop, but I think I got ahead of myself in that try and did some things out of order. The good thing is that I was able to recover each time.
Out of curiosity, did your tablet come with a gray or green cloth to clean the screen? The reason I ask is that I thought I had seen somewhere that this might be an indication of a difference in gTablets.
The EULA shows up with a new stock firmware - and yeah 4.1 / 4.2 kinda bugged me too. I never selected "I Agree" - fark that.
As for the boot loops, it seems that we still can't pin it down - maybe it's just random, I don't know.
Hi,
I was stuck after bootlooping using Cyanmod, then flashing NVflash still didnt fix the issue, this fix did it for me. Thanks for getting me back up & running. I will give another shot at using cyanmod now that I have all the files needed to get me back.
BTW< I have a green cloth. What does that mean?
Thanks,
Rich
dcom222 said:
If I remember correctly, the stock firmware with the OTA update will prompt you to accept a license and prompt to set the time, etc....
Out of curiosity, did your tablet come with a gray or green cloth to clean the screen? The reason I ask is that I thought I had seen somewhere that this might be an indication of a difference in gTablets.
Click to expand...
Click to collapse
My tab came with a grey cloth... funny thing though I got mine on the second wave of shipments to sears... I NEVER had any issues with the time i just set it and it kept the time... I remembered that when these first came out that was a problem... i thought mine was diff because i never had any issues with time reseting itself... anyway Thanks again dude for your help hope i could play this forward to someone more noobier than me
Roebeet looking forward to your TnT lites...
dcom222 said:
After a fair amount of panicking and looking over all of the threads here, I found that gtab_full_vanilla_system_2010_11_09.zip added ClockWork Recovery so I was able to use this to copy over the update-smb_a1002-2967-user.zip to my internal SD, install it, and get my gTablet working again. When the problem happened the second time, I used the method above and it worked for me.
Click to expand...
Click to collapse
I now have clockwork recovery installed... How do i copy the update.zip from external microsd to internal microsd... mounting sd-ext gives an error..
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
Error mounting SDEXT:!
Frustration levels are high with this device!!
Thanks!
a "me too" reboot problem
I was able to install TNT Lite 2.0, then 2.11. I got Clockwork Recovery installed as well.
The market would start, but if I did a search for obvious things like "Kindle", the market would give an error that it didn't exist in the market. Thinking it was the error situation described here:
http://forum.xda-developers.com/showthread.php?t=845175
I applied those instructions, and rebooted.
Upon reboot, it ended up in a continual reboot loop.
Trying to do the start with volume+power, it brings up Clockwork Recovery, and when told to wipe data/factory reset, it stays in the reboot loop. When told to apply sdcard's update.zip, it looks only at the one on the internal sdcard, which is for CWR, and goes back into the loop.
At that point I setup a microSD with the information from this post:
http://forum.xda-developers.com/showpost.php?p=9439414&postcount=7
including changing the line from sdcard to sdcard2. Again it doesn't recognize that the internal sdcard2 is plugged in, and attempts to mount it with CWR (mount /sd-ext) yields the error:
E:Can't mount /dev/block/mmcblk0p2
(No such file or directory)
Error mounting SDEXT:!
So, unfortunately I'm at an impasse, like the previous poster. I just bought the tablet a couple of days ago, so I'm far from expert at tweaking it into working.
Any suggestions on what to do, are greatly appreciated.
PS - Bought the gtablet from Office Depot, and received a green cloth.
Boot into clockwork recovery and go to advanced and format SD, use the 2gb and 512mb I believe, then flash TNT or another rom. That fixed my boot loop.
Hi,
I got a GTablet for Christmas today and I seem to have had some bad luck with it...
When I first got the tablet, it wouldn't keep any of my settings (not the wifi connection, not the development settings, nothing).
I thought I could get around this by flashing a different image (I am a novice user, though I do have a very modded N1 -- except it's still stock, sort of).
So... I did not have a MicroSD card at all (it's Christmas, all the places are closed until Monday, and I did not anticipate any problems). Still, I was able to flash the image of TNT Lite...Sort of. I had no problems upon booting, with the familiar N1 X boot animation.
I could add things to the stock Android launcher included with TNT Lite, but not remove them (as soon as I sled the icon I wanted to remove over to the 'trashcan', it force-closed the launcher, but my icon was removed nonetheless).
I did have a slightly working Market (I had the half-star issue). I did not have Titanium Backup installed, so I attempted to restore a working Market by force-closing and clearing the data of the 'Google Services Framework' and 'Market' services... Didn't work, like I thought, so I then tried to sideload Titanium Backup.
There is where my big, big problem came up. As soon as I tried to load TB onto my GTablet, I had tons of Force-Closes (and the tablet sort-of half rebooted). So, I got them to go away and tried again. Same thing.
So, I gave up and vowed to try again tomorrow. Except, I might not be able to tomorrow... As soon as I turned the tablet off, all was A-Okay for the most part... Later, I thought I'd try a little earlier than tomorrow, so when I turned it on.... I didn't get any farther than the GTablet logo before I realized I was in an infinite boot loop.
Now, I'm stuck with a boot-looping GTablet and a not working Christmas present! Help, please.
EDIT @ 3:44AM (Dec 29, 2010)- [FIXED]
FIXED!
When you get an sdcard you can do a fresh install from the external sdcard.
Yeah, I know that.
I don't know if I'll be able to rescue it or not (like I said, I'm new to this, and I was under the impression that [Power]+[Volume-UP] meant 'load recovery mode' which would look like the one I use on my Nexus One).
Do you think I should try (if I can get out of the infini-boot) flashing to TNT Lite (the latest, I think 3.1.0.1 or something similar)?
I'm wary of flashing to that one again, since it seems to have some serious problems with my particular tablet (I searched and there were no similar problems to mine that I could find).
I don't know if I'll be able to sideload Titanium Backup, are there any alternatives to that in getting a working Market (I tried anything else I could think of, but nothing was ever able to sideload onto my Tablet, ever)?
Have you installed Clockworkmod recovery?
Read the main threads (tnt lite, vegan, installing gapps) and I believe you will find someone has had the same problems you have
Hi there! I got the MicroSD card today.
So, I was looking through the guide I had previously used (http://forum.xda-developers.com/showthread.php?t=842004) and now I'm going to try to install ClockWork Mod recovery .8 (the one they said works best here).
I will update this (or maybe make a new message if you don't mind, if I can't edit my posts) if I can successfully get it working.
EDIT @ 12:47AM (Dec 29, 2010)- [Downloading the recovery mod file]
I downloaded the 'gtab-cwm-v08.zip' file to my MicroSD card, and extracted the 'update.zip' and 'recovery' folders inside (I imagine that is correct).
Then, took it out of the computer and loaded it onto my GTablet. I turned it on and did the recovery combination with [Power]/[Volume-UP].
It gave the screen that said it was loading the image and then another screen (black with 'ANDROID' and some other text on the screen).
For just a second, an error-type screen flashed on the screen (big warning icon, not sure how to describe it, but there was no text nor a loading bar).
Then, it rebooted (and then again and again, so it's not fixed yet).
Not sure what I did wrong... <
EDIT @ 1:43AM (Same Day)- [Installing recovery/Fixing boot loop]
Successfully installed Clockwork Mod Recovery .8 after downloading a 'command' file from my ROM's .rar (I modified the file so that it'll say <load-info>sdcard2<load-info> instead of <load-info>sdcard<load-info>).
Repartitioned to 2048 and 0 for the memory settings.
EDIT @ 1:55AM (Same Day) [Boot loop fixed, now just trying to figure out what to do next]
Repartitioning to 2048 and 0 in the memory fixed the boot loop. Yes!
Now, I don't know exactly what to do next... This one is still in progress right now.
Sounds like you did it right. Where you got the Clockwork file may make a difference though. There are 2 of them out there. One is from a thread that has it setup to load from an external sdcard. The other from the internal. Quick way to see what you have is to open the command file inside the recovery folder and see if it says sdcard, or sdcard2. You want it to point at whatever method you are using to load it. Sdcard for internal, sdcard2 for an external card.
If you haven't tried it already, look at this.
After that just load the rom you want.
Beware though, you may have a strange model that won't work with that, some have been floating around..... Read the full thread too
This may also be useful to you: http://forum.xda-developers.com/showthread.php?t=842000
Now, I see why it did not work... Mine had no 'command' file AT ALL (in the 'recovery' folder)!
So, how can I make one?
By the way... To address your initial issue of being in a boot loop. Get clockwork installed. Once installed go to advanced, partition sdcard. Use 2048, and 0 for the swap. That will get rid of the boot loop.
XANAVirus said:
Now, I see why it did not work... Mine had no 'command' file AT ALL (in the 'recovery' folder)!
So, how can I make one?
Click to expand...
Click to collapse
You can find one in most any of the roms. The earlier TnT roms had them, others too...
They are all the same except for the sdcard, or sdcard2 thing I talked about so don't worry about finding a specific one.
So, when I install Clockwork, do I need to leave that MicroSD in there to run it everytime (not sure where it puts the files/etc)?
XANAVirus said:
So, when I install Clockwork, do I need to leave that MicroSD in there to run it everytime (not sure where it puts the files/etc)?
Click to expand...
Click to collapse
Nope. Once it is installed you don't need the sdcard anymore. Be sure to read my post a couple above this about fixing your boot loop.
Okay, as you wrote in the first page to reformat to 2048 and 0 (in that order), I just did that (as wrote in my edit )
What should I do next?
XANAVirus said:
Okay, as you wrote in the first page to reformat to 2048 and 0 (in that order), I just did that (as wrote in my edit )
What should I do next?
Click to expand...
Click to collapse
Reboot and see where you are... It should go back to where you were before you got the boot loop. The stuff on your internal sdcard will be gone though. So I hope there wasn't anything important there.
BTW, you can hit the back button on the side of your screen to go backwards in the clockwork menus.
Nothing important. I haven't even installed anything new or changed any new settings on my current ROM (that TNT-Lite).
I'm rebooting it right now as I type this.
EDIT @ 1:58AM (Same Day)-
Your steps fixed my boot looping problem. Thanks!
Now, I don't know what next to do. I don't have Titanium Backup installed (couldn't sideload it, I kept having problems).
I don't know if the Market is fixed yet.
Did it boot?
Sent from my VEGAn-TAB-v1.0.0b4 using Tapatalk
Yes, thanks!
Awesome! Now I would boot back into clockwork and make a backup. You can rename them from a file manager too so they make sense..
Sent from my VEGAn-TAB-v1.0.0b4 using Tapatalk
I don't ever use titanium to do the market fix. I just use it to backup apps.
Sent from my VEGAn-TAB-v1.0.0b4 using Tapatalk
Okay, I made the backup like you asked. So, now should I try to fix the Market?
Is there anything else that needs tweaking?
So, There is a telemarketing company thats offering the Nexus S 4g from sprint for $49.99 a month and you only pay $100 for the phone. you get unlimited everything.
the thing is that every cellphone they give you comes with a pre-installed app called "RawData" which records all your calls, texts, data usage. they basically stalk your phone.
For some nasty reason the app to make calls, is pre-installed with raw data so when you dial a number, it sends the call to "RawData's" servers and forwards it to the number. I found out about this when I rooted the nexus and uninstalled "rawdata" but then my no so smart mind said "WELL HEY, WHAT IF I UNINSTALL THE TALK APP?" well i did, sadly it wont even call 911, when you press dial it says the app crashed.
I tried giving it a factory reset, and it turned on, and when it comes to the setup where it tells me to "touch the android to begin".
i press it and it seems to look highlighted when i press it, but it doesnt pass from there... so i was trying to install the stock rom from clockwork recovery, but it seems that the nexus doesnt have a memory card slot, and when i press install update from sd, it says "error, directory not found" or something like that...
is there another way i can install the Stock rom? oh by the way, i was messing with the recovery so i deleted the boot, so it only boots to recovery with luck..
1.how do i change the settings of clockwork to look in the internal memory for the update.zip.
2.have you heard of rawdata before?
3.whats the point of rawdata?
Thank you!!!!!!!!!!!!!1
did you try to go to mount the /sdcard in CWrecovery?
I did, but i just figured out that my update.zip might not be the right one, it still gives me that error, but i downloaded clockwork recovery 7 and installed it from from the old recovery menu and it successfully insalled and turned on my nexus, but now i still have problems with the dial pad, i try to make a call, i dial the numbers and when i press call the app crashes.. any idea?
sir i think that the rom you got is corrupted try to check the md5sum first before flashing...let me know ok?
..
Im a newbie ^_^
UGK9540 said:
Im a newbie ^_^
Click to expand...
Click to collapse
Hey I can probably upload the phone app on here for you. Just always make sure to back up your stuff. But if you want you can get it. Navigate to the folder where you download it and then navigate to the system app folder copy and replace. It. But first can you do this for me. Go into rom manager and back up your current rom. Do not delete any. And you might be able to flash back to stock through rom manager. Get like a new rom download a free one and flash that to see if it fixes the phone problem. But first see if you can restore through rom manager. Sorry if this is confusing.
Nexus S 4G using miui.us with matr1x kernal 9.0 and batttweak RC1
...
That would be great if you could upload the Phone app.. I just did the back up, but im having a hard time finding a download to a Stock Rom, so I started downloading a custom rom to see if it makes any difference.
[Hopefully I didn't miss this being covered somewhere else, as I am much the same as many of you and get beyond irritated with endless repeat questions. I searched using the best keywords I could think of for the issue, but to no avail. Apologies in advance if this has been covered!]
Alrighty. I've got a TF101, rooted it myself (thank you XDA), running 8.6.5.1.9 i believe, stock rom just with root. Used nvflash and Razorclaw. Worked like a charm.
It's been fine for the last 6 months, no issues. However, I decided to update busybox using its internal updater as I have before with no problems. I noticed I accidentally told it to install to /system/bin instead of /system/xbin, and the only reason I even knew about that was due to having to configure an app to find busybox in /xbin instead of /bin.
Now there's a problem. I can still access the internal virtual sd card, but that's about it. The device can't seem to read or write to the main directory (although it can deal with going DIRECTLY to /mnt/sdcard). Ghost commander can't view the main directory, but ESFile explorer _can_, although root browsing in ESFile Explorer is UNchecked. It shouldn't be able to do what it's doing, and it's only doing it in one of two apps.
As a result, I've got no access to any root apps obviousy, but the wifi is having issues as well, it tries connecting but it can't complete the connection.
I'm toying with just wiping and flashing a new rom entirely, but figured I'd ask before I jump in the deep end of things. I keep backups of stuff, but it's still such a pain in the ass reinstalling things.
Any suggestions? I have a feeling it's something "simple", a link file or ... something which linux gurus would know about and I would not, not being a guru or disciple myself.
Thanks in advance!
If only you have working CWM installed. You could just flash this Superuser3.0.7.
Ah, but the plot thickens. I had superuser on there. I even uninstalled and reinstalled it. No dice.
Update: I said fuggit and did a factory reset. However, my wifi is still not fully connecting to my network although it has no problem finding it. I don't have a recovery image on the external SD and unless i get the network working, will have to wait until tomorrow to get a working microsd->usb adapter to put it on there.
I CAN still get into CWM, thank god.
Current rom is stock 8.6.6.19
Razorclaw gives an error when trying to root.
Also, when trying to moust USB from the recovery menu. it fails, saying "E:unable to upen ums lunfile (no such file or directory).
I am hoping this will magically get fixed after re-installing stock from the SD card ... and that my device isn't somehow crippled.
Sorry for the massive details, but more data = better.
It will magically get fixed
I recommend you flash any Totally stock ota. Then upgrade to the latest OTA, then use my tool PERI (or another) to install recovery and root. Then you should be all fixed up.
Well, it looks like I did get things back on track, but oddly enough, neither of the standard OR modified for root stock ROMs would work. One just wouldn't install, another failed halfway through. MD5s checked out and everything. I had put Revolver 4 beta on there sort of as a "just in case", and that one installed fine (and I was pleased when it displayed "installing Busybox symlinks").
Phew. CLose close call. Now to deal with the bull**** of setting stuff back up again.
However, the question remains: I'm assuming this whole thing happened because of the busybox update and me accidentally installing it to /bin instead of /xbin, and I think it "cleaned up" its own symlinks or something.
I'm not saying don't update your busybox, although I'm sticking with what works and **** upgrading anymore, just be careful...
Thanks for the help!
Recently I used the busybox installer to update my busybox version and it went through great... but after reboot it reverted back to the old version.. And I never touch it since.. don't want to take the hassle further..
There are certain 'plague' versions of busybox that simply don't work. I'd find that list of working BBs and STICK with one that's good. I'm still on 1.63 or someat like that.
Mangraa said:
[Hopefully I didn't miss this being covered somewhere else, as I am much the same as many of you and get beyond irritated with endless repeat questions. I searched using the best keywords I could think of for the issue, but to no avail. Apologies in advance if this has been covered!]
Alrighty. I've got a TF101, rooted it myself (thank you XDA), running 8.6.5.1.9 i believe, stock rom just with root. Used nvflash and Razorclaw. Worked like a charm.
It's been fine for the last 6 months, no issues. However, I decided to update busybox using its internal updater as I have before with no problems. I noticed I accidentally told it to install to /system/bin instead of /system/xbin, and the only reason I even knew about that was due to having to configure an app to find busybox in /xbin instead of /bin.
Now there's a problem. I can still access the internal virtual sd card, but that's about it. The device can't seem to read or write to the main directory (although it can deal with going DIRECTLY to /mnt/sdcard). Ghost commander can't view the main directory, but ESFile explorer _can_, although root browsing in ESFile Explorer is UNchecked. It shouldn't be able to do what it's doing, and it's only doing it in one of two apps.
As a result, I've got no access to any root apps obviousy, but the wifi is having issues as well, it tries connecting but it can't complete the connection.
I'm toying with just wiping and flashing a new rom entirely, but figured I'd ask before I jump in the deep end of things. I keep backups of stuff, but it's still such a pain in the ass reinstalling things.
Any suggestions? I have a feeling it's something "simple", a link file or ... something which linux gurus would know about and I would not, not being a guru or disciple myself.
Thanks in advance!
Click to expand...
Click to collapse
You may have been hit with a bug I introduced.
There was a bug with version 8.0 of my application.
There is not an issue with Busybox V1.20.1.
I apologize for this bug, the application symlinked all applets to Busybox and on some devices there are applets which are unique to the device and should not be replaced by those offered by Busybox.
A simple way to fix this is to simply reflash your rom. You do not need to wipe or clear any data. This will fix the issue and you can update Busybox normally with my application as long as it is version 8.1 or higher.
I apologize for the frustration I have caused, please let me know if I can do anything to help you further. I am trying to find people who were affected to see if I can help rectify the situation.
yeah me too
I guess I should have done a more recent backup. I tell you, there is a reason i have 38 updates waiting, everytime I start going through them, boom blows up in my face
Argh! Pulling my hair out over this one. I've been flashing custom ROMs and rooting my phones for years now, since my old HTC G1. Even had KitKat running on my HTC Desire 4G!
... but this Sidekick is proving another matter. I've been through forum after forum, all saying the same things on how to root/flash this thing, but I haven't managed to get anything to work! So, here's step-by-step of what I just did and the result I get every single time, no matter the initial method:
1: Fired up ODIN3.
2: Wiped the user data and cache from the stock recovery (Android System Recovery (3e)).
3: Connect USB cable, reboot phone into download mode (using the battery-pull method).
4: Successfully flash to stock ROM, reboot.
5: Sign in with Google, enable WiFi.
6: Run SuperOneClick, reboot.
7: Grab ES File Explorer from the Market, after it updates.
8: Attempt to replace "recovery" in /system/bin with custom
... and here's where things break. Doesn't matter what version of SuperOneClick I use (and I've tried from 1.9.1 through 2.2.3), nor does it matter what exploit I select. What happens? Well... aside from everything on-screen claiming to be okay, and everything claiming it's working, once the rooting is "successful", I reboot like it says, see that SuperUser is in the applications, it shows me an su binary version...
... but anything that tries to run super-user (ES File Explorer included) that gets added to the super-user list simply does not work. I can't over-write the recovery, can't delete or muddle with anything that requires elevated privileges, and the ROM Manager for sure won't work because I can't get CWR installed.
I love my phones with keyboards. I really do. I'd love to keep this thing, but the stock firmware is driving me up a wall (especially that stupid media scanner). So if anyone has any ideas to throw at me, care to offer some? Haven't a clue at this point what I'm doing wrong.
Hey buddy!
I feel your pain, this is one of the last nicely built hardware keyboard phones, first time rooting it is a bit strange
See post #27 (or so) here
http://forum.xda-developers.com/showthread.php?t=2221030
I ran through the manual steps there and have links for needed files
If you get stuck let me know, I'll be around
demkantor said:
Hey buddy!
I feel your pain, this is one of the last nicely built hardware keyboard phones, first time rooting it is a bit strange
See post #27 (or so) here
http://forum.xda-developers.com/showthread.php?t=2221030
I ran through the manual steps there and have links for needed files
If you get stuck let me know, I'll be around
Click to expand...
Click to collapse
Awesome! I'll give this a go once I'm all done with today's activities and see if it works.
Well, apparently I have root access for the moment, but it is denying my replacing of /system/bin/recovery - in adb shell, it states "Filesystem is read-only", so I re-mounted /system -rw and no dice. Going to attempt to try again in a moment, after a reboot.
Okay, so since there's a problem with all of this, I'm going to try that second ROM (KD2 I think it was) - but as I recall, it was on a very slow server. Plus I have a load of things to do tomorrow, so it probably won't be until tomorrow evening sometime when I'll be able to flash it. Once I've used Odin to re-flash, I'll get back to you.
Well, I had to dissect "t839-Sidekick4G-UVKG2-One-Click.jar" and remove the xml file from within it, but I acquired the necessary package to upgrade to KG2 from KD1 through Odin3. Took a while to figure out just how to deal with it, and I was successful in flashing... and I even replaced the recovery file after rooting it again!
... however, now it just sits there at the "T Mobile Sidekick 4G" start-up screen when I attempt to boot into recovery, so now I'm preparing to re-flash it again to recover the stock recovery. So... still more on this, later.
EDIT: Also, I named the tar file "KG2OdinHeimdall.tar", since I basically ripped it right off the "HeimdallPackage.tar" file from the Heimdall one-click thing. Turns out, it apparently works just fine if you remove the .xml file from the original tar.
Finally!
I ended up having to use my own method to get the KG2 update installed because the one-click program kept crashing on me when selecting "Show all devices", and I opted to use AntTek Explorer (all you have to do is go into the program's options and it'll attempt to acquire admin privileges, if the device is rooted) to copy the recovery file to /system/bin - but your post worked for everything else, once I got past not being able to copy the recovery file.
I opted for the CM6 package and it's quite fast! Thank you loads, demkantor!
Nice! I'm glad all worked out well for you!
If you get a chance try out the one gingerbread ROM, its cool to see it running but there are still driver issues so keyboard is borked, really makes it pointless to have on this phone...
But there are a few nice froyo ROMs ready to be played with, someday development will hopefully pick up again
Until then, happy flashing!