HDMI audio out problem - Samsung Infuse 4G

Hi i have a problem with my video and audio output i hace a Optoma proyector with HDMI but when i connect with the mhl adapter the audio cant output via 3.5 mm jack the video signal and audio is send toggether via HDMI any way to separate this signals . Any option to enable this reature in our devices

celtichazard said:
Hi i have a problem with my video and audio output i hace a Optoma proyector with HDMI but when i connect with the mhl adapter the audio cant output via 3.5 mm jack the video signal and audio is send toggether via HDMI any way to separate this signals . Any option to enable this reature in our devices
Click to expand...
Click to collapse
Sounds like you need a receiver bra. Definitely a must for every projector owner for this very reason.

Related

Android Tablet output video via HDMI and audio via analogue at the same time?

Thing is I have an old TV with a DVI connection - I have put an HDMI Convertor on it and it woks fine with my laptop - so with a laptop I output the video via the HDMI cable to the television and stick an audio cable in the headphone socket and get the sound through my hifi.
Someone tried it for me just using a HDMI to HDMI and no sound came from the headphone jack however I wondered if because mine was not "true" HDMI it might work?
Will an android tablet do this?

All Share dongle

So,
what should I buy to have all share working with both my LED TV in the bedroom (a normal 26" LED tv with no USB port and only HDMI inputs) and with my Marantz receiver (where i have HDMI input)?
thegios said:
So,
what should I buy to have all share working with both my LED TV in the bedroom (a normal 26" LED tv with no USB port and only HDMI inputs) and with my Marantz receiver (where i have HDMI input)?
Click to expand...
Click to collapse
just the allshare cast dongle, your phone connects to it by wifiDirect and the dongle connects to you monitor HDMI port providing Audio and Video. Dont know where your receiver is going to fit though, you may have to use the analog outputs on your tv and send them into the Marantz phono ports. Unless your TV has a spdif, you might find that your tv had a digital audio bypass which sends audio coming in via the HDMI port out of the SPDIF/DIGI port and so then on into your receiver that way.
da.trute said:
just the allshare cast dongle, your phone connects to it by wifiDirect and the dongle connects to you monitor HDMI port providing Audio and Video. Dont know where your receiver is going to fit though, you may have to use the analog outputs on your tv and send them into the Marantz phono ports. Unless your TV has a spdif, you might find that your tv had a digital audio bypass which sends audio coming in via the HDMI port out of the SPDIF/DIGI port and so then on into your receiver that way.
Click to expand...
Click to collapse
Maybe if it' a current top of the line receiver with multiple hdmi inputs, you would connect the tab to the receiver then receiver to monitor.
This way you can attach multiple hdmi sources e.g. bluray to the receiver and use the receiver to select which source you want to output.
Does that make sense?
yammy6200 said:
Maybe if it' a current top of the line receiver with multiple hdmi inputs, you would connect the tab to the receiver then receiver to monitor.
This way you can attach multiple hdmi sources e.g. bluray to the receiver and use the receiver to select which source you want to output.
Does that make sense?
Click to expand...
Click to collapse
I was thinking that might work but i've never tried a HDMI passthrough on a device like that, i've always gone straight into the TV. Worth a try.

[Q] With HDMI - audio headphone jack disabled

After plugging in the HDMI adapter to my projector, I notice that my SG3 audio jack is disabled. It looks like the only way to get audio is via bluetooth. Can anyone confirm this? Is there a software fix to get the headphone jack activated again?
Also, using bluetooth, the audio is not synched - I presume due to latency issues. If I have to use bluetooth, is there a way to sync the audio and video? I know there are programs which can re-sync the audio / video in the mp4 file, but this is a hassle. My projector does not have audio out, so I am stuck having to get sound through bluetooth.

[Q] Recording video with external audio source, possible???

Hi there,
I'm owner of a Galaxy S4 Mini.
I'm also a home/amateur dj.
I would like to record a video while I'm djing with my mobile, using the minijack connection as a sound input. I want to connect the mixer output directly to the phone so I can have a video with the best audio possible.
Is that possible?, is there any app able to record video with external audio source (not the integrated mic)?.
Many thanks for your support.
genaker said:
Hi there,
I'm owner of a Galaxy S4 Mini.
I'm also a home/amateur dj.
I would like to record a video while I'm djing with my mobile, using the minijack connection as a sound input. I want to connect the mixer output directly to the phone so I can have a video with the best audio possible.
Is that possible?, is there any app able to record video with external audio source (not the integrated mic)?.
Many thanks for your support.
Click to expand...
Click to collapse
YEs.... u just have to get a local headphone with mic, open the mic box , remove the mic and attatch 2 wires in position of mic... which u could use to connect external mic!
tbiwalkar said:
YEs.... u just have to get a local headphone with mic, open the mic box , remove the mic and attatch 2 wires in position of mic... which u could use to connect external mic!
Click to expand...
Click to collapse
Thanks for your fast answer.
I would like to avoid using a mic. I want to connect the output of my mixer directly to the phone with a RCA-Jack cable while recording the video.
genaker said:
Thanks for your fast answer.
I would like to avoid using a mic. I want to connect the output of my mixer directly to the phone with a RCA-Jack cable while recording the video.
Click to expand...
Click to collapse
then connect a 3.5 female jack in place and use conector like this one
https://www.computercableinc.com/cc...r-2-RCA-Females-to-1-3-5mm-Male-IEC-M7401.jpg
I'm using a RCA(male)-Jack(male) cable to connect my mixer to my phone.
The question is: how do I configure the video record app to make the phone take the sound from the mixer????.

help me broken jack over DAC usb audio

am using redmi 3s
plz guys help me out plzzzzzzz:cyclops:
Hello guys i want some experienced expeRTS openion as well as tester RND USERS
my mi phone headphone jack was broken from one month non repairable becoz PCB tracks tapperd itself unknowly while cleaning.
this is my idea idk will it work or not without lossing AUDIO OUTPUT QUALITY
everyone aware in market lots off bluetooth usb dongles are there which haves female audio jack
i know bluetooth receiver are also there but as i mentioned earlier i want replacement without lossing quality of sound output over earphones i hv costly earphones $20-$35 house of Marley in ear pairs bassy and punchy like .
so here i m cuories about
are u all aware miui8 have audio source option are available inside devloper mode section
/audio over mini usb ? yes it there
so here is deals
1/
Micro USB Male to 3.5mm Audio Jack Female Adapter Cable {mostly only available on eastern countries so in my country i was coudnt find it all
and using with
second option
2/
Rrimin Wireless Bluetooth V4.1 EDR Music Audio Receiver 3.5mm A2DP Stereo Adapter (for Android, Black) ? {yes its there for purchase )
so procedure kind same for both little bit
Devloper option mode >>>usb source >>>setting as >>>>audio source <<<<while plugged in 1st micro usb to 3.5 female jack cable {restart some time need to set option properly.
then try to plug earphone pairs standard one like bass enabled . then play music or song of 320kpbs
would you please verify for me is it working or not without lossing quality of output /usb port mostly supports DAC output best one for high output
and second try might be like this using
2/Rrimin Wireless Bluetooth V4.1 EDR Music Audio Receiver 3.5mm A2DP Stereo Adapter (for Android, Black) ? {yes its there for purchase )
one additional item is required to perform the second procedure OTG cable
here is way of hop
all procedure are same as above mentioned way 1st in
2nd way just need to involved bluetooth pairing and otg involment
connect otg cable to standard bluetooth receiver who's have 3.5 female jack standard one most probably similar to which i mentioned
here is we just involving power output to bluetooth receiver ..
....a} after connecting usb bluetooth receiver to otg plugg it into phone micro usb port
b} setting usb source as audio from devloper mode mostly available into miui8 users idk abt know others ROMs
c}next step after powering up bluetooth receiver
d} pairing with inbuilt bluetooth connectivity of phone
e} after that friends you need to plug it earphones on bluetooth receiver. play some 320kps bass music using same standard set of bassy earphones like snnezier ...house of Marley or skullcandyes 20$40
tell us have u getting output of audio using both procedure i1st and 2nd { items }
if getting output of audio is it trustworthy ? as compare to original headphone PCB jack 3.5
PCB jack quality output vs usb output ....firstly i need some tester experienced groups or individual personality who will follow the above procedure basically who's hv both items .....
broken jack without lossing quality of source even its will be better due to DAC output
please response :good:

Categories

Resources