New U 8160 ROM was released by huawei Vodafon Android 2.2.1 kernel 2.6.32.9-perf
Its working perfectly on our phone just the wifi will have to be fixed
Installation
1. Flash a recovery image (tested with AmonRA.) and ascend from rommanager or clockwork
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
or
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
-----------------------------------------this is allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green
I'm doing the ROM on VODAFONE 845 aka HUAWEI U8120 if u try it on another device i dont care it might work but i will remove all unused stuff from kernel later on so it might not work on another devices
U'RE FLASHING U'r DEVICE SO DO NOT BLAME ME IF SOMETHING GOs-AS-S WRONG
I'm using TITANIUM Backup for apps restore it is free on market
Thnks goes to ALL SHARING DEV's ON XDA MODACO and SO on. THNX GUYS.
Original Downloads:
Original Vodafone ROM
Original Vodafone Recovery
anryl said:
HUAWEI THREADS
joilaroi
- [ROM][Huawei U8120]Android 2.3.3 - Cyanogen Mod 7.0.0 – RC1 - update3
Shiftok
- [ROM] Anroid 2.2 for Huawei u8110 by ShiftOK
cedric123
- ROM [Gingerbread for Huawei u8120/u8110/u8100]---Kernel 2.6.32 Baked Zodiac Cookie
- FROYO CM 6 ROM FROZEN ZODIAC JUICE HUAWEI Vodafone 845
- FRESH ZODIAC FRUIT Custom ROM||HUAWEI U8120 u8110 u8100||vodafone 845||Pulse Mini
tas0s
- CM6 for Huawei U8120 (under development)
- Froyo (2.2) for HUAWEI U8120 [based on AOSP] (under development)
nicoderboss
- [HUAWEI U8100/U8110/U8120] Froyo Kernel Development / Porting (Your help needed!)
freddyemmer
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] Pro Celestial
cas_xp
- [ROM] [Huawei U8100] Froyo Wifi enabled version
kallt_kaffe
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] The Celestial Teapot RLS4d [2010-12-19]
- [ROM] [Huawei U8100] [Froyo] Climbing Mount Impropable beta 1 [2010-10-15]
bitye
- [ROM]FroyoBit for Huawei [email protected] | CM6.2 | 14-03-2011
tahahawa
- [ROM] tahahawa's U81XX Froyo Mod V1.3.5 (Now with OTA) (First U81XX ROM with OTA!!!))
Leito92
- [ROM] V845 custom rom by Leito
hateznemigaz
- [ROM] LR845 v1.9 for Vodafone 845 [Themes] Espresso, Sense mods
Click to expand...
Click to collapse
links
To reply in this thred :
Device : u8120 Recovery: Ascend 3.0.0.5 Fully wiped + installed rom
WiFi and Bluetooth not working , Alarm + missed call sms gmail - reboots android , Batery life not good
sound ok phone calls ok sms ok
thanx
Click to expand...
Click to collapse
19-06-2011 attached boot.img with changed kernel OC no Dpad no Mouse - extract and / pwr+red+voldn / fastboot flash boot boot.img / fastboot reboot
18-06-2011 First working test NO WiFi , Camera 2Mpx
zipalligned rooted deodexed good calibration
use another alarm app like alarmdroid
Click to expand...
Click to collapse
Info and other hacks
# 1 link for fixes like sdcard speed and custom img
# 2 link Coocking compiling guide CM7 by sykopompos
I have pointercal files to fix calibration for U8110 and U8100. These fix calibration on the devices. I'm about to fix calibration in my ROM by making flashable .zips. Also the MMC.patch and oc patch for the kernel, will it work on this kernel if we source?
If we get the source it will OC
Sent from my Vodafone 858. 852 using XDA Premium App
Device Config to build ClockworkMod Recovery in CyanogenMod for the Huawei U8160 (Vodafone 858 Smart) helps?
im downloading and flashin in u8110 asap to see how it goes
Gjole86 said:
Device Config to build ClockworkMod Recovery in CyanogenMod for the Huawei U8160 (Vodafone 858 Smart) helps?
im downloading and flashin in u8110 asap to see how it goes
Click to expand...
Click to collapse
we have working ascend recovery so no need for that we need to fix the wifi and the camera is just 2MPx
Well camera is not big deal, coz its crap even on VF845, and I dont think it will make big difference here.
EDIT: Tested on Huawei U8100. Work as expected - relatively smooth, stable, calibration bit off but still nicely usable (maybe coz its not U8120). Wifi doesnt work as expected. No Adreno drivers. But it looks promising.
Bluetooth does not work in this rom... Audio - white noize, replaced libaudio.so of tahahawa rom.
it reboot phone after missed call and received sms?
Shiftok said:
it reboot phone after missed call and received sms?
Click to expand...
Click to collapse
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
verified. nice rom though
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
Any ideas for fix this bug?
and another old bug - the phone goes to bootloop when battery power is low (about 15% less)
gixandr said:
Bluetooth does not work in this rom... Audio - white noize, replaced libaudio.so of tahahawa rom.
Click to expand...
Click to collapse
Shiftok said:
it reboot phone after missed call and received sms?
Click to expand...
Click to collapse
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
gixandr said:
and another old bug - the phone goes to bootloop when battery power is low (about 15% less)
Click to expand...
Click to collapse
i dont see what models what recovery and so on check 2nd post
change kernel from nomouse no dpad source
attached boot.img on 2nd post
Any news about this rom?
hi,anryl.
someone told me,Android 2.2 Kernel with Basband Version 2210 have some bugs,like recive sms will reboot phone.
I think may be is helpful for you.
No time here i'm helping HERE
Related
Installation
1. Flash a recovery image (tested with AmonRA.)
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
or
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
-----------------------------------------this is allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green
I'm doing the ROM on VODAFONE 845 aka HUAWEI U8120 if u try it on another device i dont care it might work but i will remove all unused stuff from kernel later on so it might not work on another devices
U'RE FLASHING U'r DEVICE SO DO NOT BLAME ME IF SOMETHING GOs-AS-S WRONG
I'm using TITANIUM Backup for apps restore it is free on market
Thnks goes to ALL SHARING DEV's ON XDA MODACO and SO on. THNX GUYS.
Original Downloads:
Original Vodafone ROM
Original Vodafone Recovery
ORIGINAL UNROOTED LATEST VF ROM CZ
this is the updata.app released by vodafone redone by me to update it is working as original not rooted
ROOT ONE CLICK
anryl said:
HUAWEI THREADS
Slyking241
-(ROM) 2.3.7-CM7 Huawei U8120--SLYKING241
kallt_kaffe
- [ROM][Huawei U8100]Unofficial CM7.1 (Android 2.3.7) [2011-10-05]
jmcc30
- [ROM][U81XX] Cyanogen mod 6.2.0 Beta 1 [07.09.11]
Lololololololololol
- Vodafone 845(U8120) Rom
joilaroi
- [ROM][Huawei U8120]Android 2.3.3 - Cyanogen Mod 7.0.0 – RC1 - update3
Shiftok
- [ROM] Anroid 2.2 for Huawei u8110 by ShiftOK
cedric123
- ROM [Gingerbread for Huawei u8120/u8110/u8100]---Kernel 2.6.32 Baked Zodiac Cookie
- FROYO CM 6 ROM FROZEN ZODIAC JUICE HUAWEI Vodafone 845
- FRESH ZODIAC FRUIT Custom ROM||HUAWEI U8120 u8110 u8100||vodafone 845||Pulse Mini
tas0s
- CM6 for Huawei U8120 (under development)
- Froyo (2.2) for HUAWEI U8120 [based on AOSP] (under development)
nicoderboss
- [HUAWEI U8100/U8110/U8120] Froyo Kernel Development / Porting (Your help needed!)
freddyemmer
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] Pro Celestial
cas_xp
- [ROM] [Huawei U8100] Froyo Wifi enabled version
kallt_kaffe
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] The Celestial Teapot RLS4d [2010-12-19]
- [ROM] [Huawei U8100] [Froyo] Climbing Mount Impropable beta 1 [2010-10-15]
bitye
- [ROM]FroyoBit for Huawei [email protected] | CM6.2 | 14-03-2011
tahahawa
- [ROM] tahahawa's U81XX Froyo Mod V1.3.5 (Now with OTA) (First U81XX ROM with OTA!!!))
Leito92
- [ROM] V845 custom rom by Leito
hateznemigaz
- [ROM] LR845 v1.9 for Vodafone 845 [Themes] Espresso, Sense mods
Click to expand...
Click to collapse
Rom download links
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanx beerfriends : drak2 , Nate Thorp
ROM Download's //\\aNDROID browser qtadb for apps backup attached platform tools
If u like u allways welcome to donate a beer
fromV858 Android 2.3.7 on 2.6.32.9 ---- ROM
CM 7.1 2.3.7
Anryl said:
IT is based on kallt_kafee work compiled by me
remove animation set compcache 26% disable jit vmheap 24m
no usb to pc use QtADB or similar
oc up to 748
Angry birds all 3 OK
WiFi ok GPS ok
compass ok
no FM radio
BOOT IMG FROM ROM 17-10 boot img with keylayout + speed fixes to try
BOOT IMG FROM ROM 16a-10 boot img with keylayout
BOOT IMG FROM ROM 16-10 key layout fix "auke11 found it" NO WIFI fixing slowly all compilation warnings added Anryl info into kernel
BOOT IMG FROM ROM 15
LINK 14-10-cm-7.1.0-RC1-U8120-Anryl
LINK 12-10-cm-7.1.0-RC1-U8120-Anryl
LINK 10-10-cm-7.1.0-RC1-U8120-Anryl
LINK 8-10-cm-7.1.0-RC8-U8120-Anryl
LINK 5-10 cm7 2.3.7 u8120 KANG GRJ22
--- Kallt_kaffe calibration app flash after rom
--- BOOT IMG for other devices like u8100 u8110 if the rom is not working SOFT KEYS - flash after rom aparently not working
---- BOOT IMG for other devices like u8100 u8110 if the rom is not working SOFT KEYS - flash after rom
Anryl said:
SUPERCHARGER SCRIPT FROM rev16 and up
LATEST GOOGLE APPS
DATA TO SD EXT4 SECOND PARTITION
RECOVERY 5.0.2.6 clockwork u8120
RECOVERY 4.0.1.5 clockwork u8160
Click to expand...
Click to collapse
Click to expand...
Click to collapse
MARKET APPS DOWNLOADS
IMAGES 2.3.7 12-10 ROM
Click to expand...
Click to collapse
TEST BOOT IMAGES
anryl said:
04-10-4
4-10-2 OC 748
4-10 OC 691 from new source
3-10 OC test4
3-10 OC
Test TURBO 3-10
10/2/2011
23/9/2001 3 - OC default 528 reported not workin
23/9/2001 2 - OC default 528 reported not workin
23/9/2011 1 - OC default 600 reported not working on pulse mini
Click to expand...
Click to collapse
joilaroi said:
rev15
Updated kernel to 2.6.32-9 own(based on Huawei u8160)
EXT4 support
OC up to 748 mhz with SET CPU
Fixed PWR key layout
Fixed screen on/off pwr button
usb to pc sd working hotplug
apns removed if u want DATA flash after rom CM7_DATA
no Google apps flash after ROM Google APPS
Linpack single thread 4.8MFlops on 710MHz WIFI ON no apps killed
Linpack single thread 4.7MFlops on 690MHz WIFI ON no apps killed
DOWNLOAD ROM HERE rev.B
DO NOT SWITCH USB TO PC IT WILL JUST PLUG TO PC AND WORK AS SD CARD AND ADB IF U SWITCH U HAVE TO REBOOT IT WILL DO CD ROM AGAIN
DOWNLOAD ROM HERE rev.A
CM7_DATA_ON
CM7_DATA_OFF
Google APPs
NO OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
E-Mail.apk just install it
Click to expand...
Click to collapse
CH based 2.6.32.9 FroYo ROM
anryl said:
CH U8120 beta 5
- camera OK
- video OK
- GPS OK
- FM radio OK
- Alarm install other alarm app as it will reboot system (some permissions?)
- key lights broken
...................... HERE beta 3 and update to beta 5
Click to expand...
Click to collapse
CM 7 here pre-alpha testing fixing only for dev's - ROM THREAD HERE
anryl said:
-recovery HUAWEI ASCEND -from rommanager
-first install task manager to free memory
-then in setting cyanogen set up cpu speed and dalvik and jit
-in setting adwlauncher set swipe down action open notification
-in spare parts set end button
1. setup start provisioning
no : GPS , video , kamera , youtube
yes : ril , wifi , OC up to 748 ....... test it
Click to expand...
Click to collapse
CM 6 here
anryl said:
permission b&w usb2pc fix - test and report
Google APPS flash over rom
HTC_IME apk
4-24-2011 AnrylCM22 few tests like openGL driver and usb drivers - just test it
Preview off rel 14
04-09-2011 AnrylCM14 fixed permissions for market to show apps - video illusion is working for video taking
---------- AnrylCM14_fix after CM14 for fixing with new boot.img for callerID fix
rel 13app ap2SD from market works
04-07-2011 AnrylCM10 usb sd card2pc (partialy) working - still no video taking
04-05-2011 AnrylCM9_1 still no video taking- moded kernel - moded key's only pwr wakeup .......
SetMAC fix programm flash like ROM after rom update do not wipe data
04-04-2011 AnrylCM9 (no video recording)
04-02-2011 AnrylCM8 lights back on (no video recording)(no color playback on youtube and galery....)
04-01-2011 AnrylCM7_2 -- camera + compass -- lights NW
03-31-2011 AnrylCM7 -- camera + compass -- lights NW -- phone call not working mic.
03-23-2011 AnrylCM6 -- rotation fixed working
03-19-2011 AnrylCM3
03-16-2011 AnrylCM2
03-16-2011 AnrylCM1 --- not tested if u dare test it
i'm using attached clockworkmod
recovery
Camera not working
SD from QtADB acessible fine
Sensor not working --- till CM2 on CM3 fixed
Linpack over 5MFlops
Click to expand...
Click to collapse
AOSP development started tas0s HERE any help welcome
anryl said:
3-3-2011 started dev. off aosp on 2.6.29 kernel on the weekend will have beta's BETA ROMS HERE JUST CHECK IT OUT
-- WIFI OK (mac need fix but WPA ok)
-- Dpad OK (leds need fix)
-- calibration OK need calibrate with pen
-- GPS OK (need agps)
-- Gsensor little fcuked
-- camera not working
-- Linpack 5 Mflops
-03-04-2011 AF1
Click to expand...
Click to collapse
FROyO
anryl said:
MOUSE and D-PAD disabled
DO NOT RESTORE DATA APPS BEFORE FULLY TESTING THE ROMgoogle sync will damage wifi
Click to expand...
Click to collapse
TO DO
1: FIX D-PAD - DISABLED
2: FIX SCREEN DRIVER
3: FIX WIFI SLEEP
4: ADD CALIBRATION APPS
anryl said:
kernel 2.6.32.9 moded Over Clocked up to 691 MHz
2/21 release 20.3 few fixes jit enabled jit disabler /\jit enabler
2/20 release 20.2 flash release 20 and update 20.0-20.2 might upload later full rom
2/20 release 20 WiFi TURN OFF after every use otherwise will reboot the device after sleep and turn off wifi
rel20 updates here just flash them over release 20 rom in amonra so no need to wipe- u can use byte tornado to dwnld to sdcard root and then flash
updates
1 - build.prop might use it later with rom updater will see
2 - media my custom boot animation from my avatar
3 - remove my animation from rom
4 - update 20.0 - to - 20.2 fix WiFi sleep
Click to expand...
Click to collapse
anryl said:
OLD releases
2/17 release 8_3 Fixed Wifi MAC finaly i hope
2/16 release 8 _ 2 TEST IT wpa change in system/bin in wpa conf change group wifi to system. enjoy
2/15 release11 WIFI noOK TOUCH-calibration apps OK display driver still fcuked - might work on 8100 reenabled extra key
2/14 release 8 WIFI NOok TOUCH calibration app OK use pen for calibration or smaller fingers
kernel 2.6.32.9 moded Over Clocked 614 MHz
2/13 release 5 on Cas_XP BETA3/2/1 ROM
2/11 release 3 on Cas_XP BETA3 ROM
2/11 release 2 on Cas_XP BETA3 ROM NO WIFI
2/7 release 1 no WIFI on Cedrik FROZEN FRUIT ROM
Click to expand...
Click to collapse
anryl said:
APPS I'm USING ALLWAYS
NAVIGON / Titanium Backup / AndroZip / ByteTornado / FancyWidget 1.3 / Opera Mini /Quick Settings /Root Explorer /SetCPU /Swapper Configurator / Task Manager / Terminal Emulator / Tune In Radio
Click to expand...
Click to collapse
anryl said:
BOOT IMAGES for TESTS u can use on tahawa 2.2 cas_xp 2.2 cedric 2.2 roms
turn off phone hold red volDn power release and connect to pc
just use in LINUX
fastboot flash boot boot5.img
fastboot reboot
or windows
fastboot-windows flash boot boot5.img
fastboot-windows reboot
to recover old boot.img just unpack from old rom and flash it the same way
http://www.4shared.com/dir/nQer4MnT/BOOTimages.html
No 5 and 6
5 - 12-2-2011 up to 691 MHz
6 - 13-2-2011 up to 691 MHz
boot15imgpluscamfixforBeta8tar fix for release8 for WiFi and camera - put libaudio.so into system/lib with rootexplorer and reboot
Click to expand...
Click to collapse
GUIDES
SD CARD SPEED FIX
Code:
init.rc -- ad lines
# sd card read speed fix
write /sys/devices/platform/msm_sdcc.1/mmc_host/mmc0/mmc0:1234/block/mmcblk0/queue/read_ahead_kb 2048
Custom rle attached
gimp save picture as raw -> then
5652rgb < initlogo.raw > initlogo.rle -rle
MODDING ROMS ON WINDOWS
anryl said:
1.download rom u want to use
2.download my batch'es rel2 -- stil fixing them so its just first working test
3. put rom into IN folder
4.run menu.bat
5.extract modify rom ----> In KITCHEN FOLDER
6. extract create sign kopy install
For updates u'l find out
Click to expand...
Click to collapse
MODDING ROMS ON LINUX - kernel - kitchen .....
anryl said:
GIT VF845kernelFroyo
Click to expand...
Click to collapse
dsixda kitchen
HERE discontinued
latest kitchen HERE
Click to expand...
Click to collapse
On UBUNTU 10.10
install java5 all dsixda kitchen thread how to make it run
dsixda said:
Ok, as a last resort (and if you don't want to downgrade your Ubuntu), then download the .bin file for Java JDK 5 (not found in Ubuntu, so you'll need to install it manually). Then, do the following:
Change to the folder that contains your JDK 5 download. e.g. cd ~/Downloads
Do a chmod +x name_of_your_jdk5.bin and then sudo ./name_of_your_jdk5.bin to install it.
Open up the file ~/.bashrc (OR /home/your_id/.bashrc) and add the following at the END of the file:
export JAVA_HOME=path_to_your_jdk5_folder, e.g. /home/dsixda/Downloads/jdk1.5.0_22
export PATH=$JAVA_HOME/bin:$PATH (BELOW the previous line)
Launch a new terminal session by typing "bash" or just type source ~/.bashrc.
Verify your Java 5 (or 1.5) is installed with the command "java -version". Voila!
Click to expand...
Click to collapse
anryl said:
get sdk and ndk or download here the tools only
android-sdk_r09-linux_x86.tar >> put platform-tools files into /bin or make path to them
android-ndk-r5b-linux-x86.tar.bz2 >> put from prebuild linux-x86 bin all files into /bin or make path to them
Click to expand...
Click to collapse
anryl said:
KERNEL source all in terminal cd /where/is/kernel
HERE
CONFIG FILE .config >> file in root of kernel HERE
Cas_XP patch { in root of kernel patch -p1 <../mmc.patch }HERE
OC PATCH HERE
Click to expand...
Click to collapse
anryl said:
.config >> file in root of kernel
DISABLE MOUSE IN .config "# CONFIG_INPUT_MOUSE is not set"
DISABLE OK BUTTON .config "# CONFIG_HUAWEI_FEATURE_OFN_KEY is not set"
Click to expand...
Click to collapse
anryl said:
CREATE zImage in terminal "make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage"
-j4 is for my 4core CPU << this one in base kernel directory will create in arch arm boot "zImage" file that u put into kitchen "BOOT-EXTRACTED" with advanced menu 20 then u redo boot.img in kitchen and with (device power volDN redkey) " fastboot flash boot /where/kitchen/WORKING_date/boot.img " and "fastboot reboot"
Click to expand...
Click to collapse
anryl said:
IF u need the kernel OUTPUT just turn off the phone connect to pc turn on the phone and type "adb shell cat /proc/kmsg > log.txt" so often till its recording the log to finish just press ctrl+c then u'l see the log
Click to expand...
Click to collapse
anryl said:
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- mrproper >> cleans the kernel
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- oldconfig >> cleans just for new config check
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- menuconfig >> create setting GUI
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage >> create kernel file z_image in arch/arm/bin
Click to expand...
Click to collapse
anryl said:
speed up CM build from 50 min to 15 min
u need 6gb RAM or MORE
u have to make link /dev/shm ~/android/system//out/target/product/u8120/obj
before u make next build delete all directories from obj
it will build it in ram so after reboot it will no longer be there
Code:
#! /bin/bash
#. build/envsetup.sh
#brunch u8120
if [ "$1" = "" ]
then
echo Insert u8100 to make u8120 from u8100 source
wait
else
if [ "$1" = "u8100" ]
then
rm -f -R /home/anryl/android/system/out/target/product/u8120/*
mkdir /dev/shm/obj
ln -s /dev/shm/obj /home/anryl/android/system/out/target/product/u8120/obj
. build/envsetup.sh && USE_CCACHE=1 brunch $1
rm -f -R /dev/shm/obj
fi
fi
Click to expand...
Click to collapse
very good
hi. ive flashed the rom . i will give feedback later
joilaroi said:
hi. ive flashed the rom but it stays in bootloop. i did a wiped data\davik
Click to expand...
Click to collapse
i do wipe before and wipe after flash and allways no bootloop so dont know probably different vodafone devices the rom is fully tested on my device
u can try clockwork 1.8.1.4 pulsemini
anryl said:
i do wipe before and wipe after flash and allways no bootloop so dont know probably different vodafone devices the rom is fully tested on my device
u can try clockwork 1.8.1.4 pulsemini
Click to expand...
Click to collapse
i DID A WIPE AGAIN AND IT WORKED. TESTING IT NOW
THE WIFI IS NOT SEARCHING NETWORKS AND IT SHUTS DOWN
Which differences between your and Cas_XP BETA3 ROM? Only CPU?
mih_88 said:
Which differences between your and Cas_XP BETA3 ROM? Only CPU?
Click to expand...
Click to collapse
kernel for vodafone
the wifi i dont know im testing only on my wpa network at home
Ok, I tested R2. Wifi not worked, but DPAD disabled 100%, so no crashes, not the best, but made the rom usable. I will try R3 now.
Calibration app still missing right?
R3: Wifi works till first reboot after got ERROR! message, and can't reconnect, just searching
Hi anryl,
I've tested your new rom release and:
@U8120
1. Calibration is better on cas_xp rom
2. Full wiped (rom installed twice) and wifi isn't working.. "can't detect networks" and the wifi turns off
Have turned off and turned on the phone but I can't get wifi to work...
3. D-pad 100% disable (good... on cas_xp d-pad click freezes)
4. Camera app now gives an error when trying to record a video, like in cas_xp rom.....
SO, both roms perfectly joined, and we get a "perfect" FROYO rom (with some mods needed by D-pad, keyboard light... and probably some other thing)
Keep the good work
I was thinking and...
May I assume that the "Video Recording" problem is related with something in the kernel because the wifi?
=/ or is this a stupid thing?
i need to manage wifi into cedrics base then it will work camera and wifi after that i need to find the calibration data that i can take 2.1 data and insert into rom dont know where it is yet
Thanks for this post I am not able to make a ROM right now but i hope all issues will be fixed soon.
i only got 2 suggestions.
-Can you make an overclock patch til 691Mhz?
-The d-pad is disabled thats great but can you enable it in the future?
-Fully working wifi
-Perfect calibration for every device.(we can only archieve this with 3 difrent roms cuz the celibnration is on every huawei u81xx phone diffrent
Thank you so much for this ROM
EDIT:::
Hi anryl can you tell the commands how i can start crosscompiling and make my own kernel?
i am runnnung ubuntu 10.10 do i need to install any 3rd party software?
Where is the calibration config in the kernel source.
How can i inplant a .config and mmc.patch?
When i compile the kernel is it a boot.img or a kernel-boot.img file and i need to create the boot img after compiling
Thanks
BTW. if anyone know the answers plz tell me
gona update post 3
anryl said:
gona update post 3
Click to expand...
Click to collapse
Thanks for updating post but i still cant get it working.
When i run commands it says: arm-eabi-gcc not found
and i get thousend of diffrent choises and error.
So cant you explain completly how you compiled the kernel.
I would realy want tthat
cedric123 said:
Thanks for updating post but i still cant get it working.
When i run commands it says: arm-eabi-gcc not found
and i get thousend of diffrent choises and error.
So cant you explain completly how you compiled the kernel.
I would realy want tthat
Click to expand...
Click to collapse
its updated just download the ndk and sdk and put into u'r path or put into bin
or in /home/cedric/.bashrc add last line
"export PATH=/home/cedric/android-sdk-linux_x86/platform-tools:/home/cedric/android-ndk-r5b/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/:/usr/lib/jvm/java-1.5.0-sun:$PATH"
cedric this can help you too
http://www.robmcghee.com/android/compiling-an-android-kernel/
anryl said:
its updated just download the ndk and sdk and put into u'r path or put into bin
or in /home/cedric/.bashrc add last line
"export PATH=/home/cedric/android-sdk-linux_x86/platform-tools:/home/cedric/android-ndk-r5b/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/:/usr/lib/jvm/java-1.5.0-sun:$PATH"
Click to expand...
Click to collapse
Still having issues will try again tomorrow
cedric123 said:
Still having issues will try again tomorrow
Click to expand...
Click to collapse
if u run ECHO $PATH
u will see the path there is allways /usr/bin so u can copy the files arm-eabi-* to /usr/bin or anywhere where is ur path looking and u copy as well the fastboot adb and so files there as well so it is working allways
if u're done u can type arm-eabi-gcc it should report no input files then all is OK
ICS 4.0.4 - Cyanogen Mod 9.0.0 – Huawei U8120 - update 06 - Unofficial
Based on Tilal6991 ICS port, Psyke83 work, Tomm13b Blade ICS port, TeamICS work and Arco Buzz device ICS port .
Thanks for their work
Kernel:2.6.32-9 (based on Psyke83 u8160 sources and JoeyJiao Huawei kernel sources)
(not updated)
Sources download
Ext4 support
OC 748mhz
Android : 4.0.4 / CM9.0.0
Sources Download
Working:
Touchscreen
audio
Wifi
Launcher
Sms and Call -2g/3g
Bluetooth
Accelerometer
Camera (no video recording)use D-pad or power key to take pictures
Data
Gps
Signal Strength
Virtual keys
Lights
Keys
SD card mount
ADB
D-Pad
D-Pad click
Tethering / Hotspot
Bugs/Not working/TODO:
HW accel (no GPU hardware on Huawei's U81XX devices)
Video playback (we need Qualcomm's openmax hacked for armv6)
Missing FM
Lots of bugs and work to do
I am not responsible for any damage to your phone
Install Notes:
FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green
1-Learn how to flash *.img files with fastboot in the XDA forum
2-Flash ClockworkMod Recovery 5.0.2.3 for Huawei U8120 (see end of page)
3-Install Rom from Sd Card
4-Choose the Rom and wipe everything before install
For Updating Rom
Rename file to update.zip. put on the root of sdcard. enter recovery and select install update from sdcard
Google Apps for CM9
http://goo-inside.me/gapps/gapps-ics-20120317-signed.zip
Alpha 1
Initial config
Update1
lights fixed
SD card mount fix
adb fix
keyboard layout fixed
updated kernel
updated to latest CM9 sources
Update 2
Phone.apk force close fixed (Thanks to Tilal6991)
Built in browser fixed
call/end call keys fixed
updated kernel and modules
updated to latest CM9 sources
Update 3
updated kernel to 2.6.32.9-perf codeaurora (based on Psyke83 sources)
replaced bootlogo
updated sources to CM 9.0.0 - ICS 4.0.4 - RC0
NOT BOOTING
Update 3a - (06-04-2012)
updated kernel to 2.6.32.9-perf Huawei (based on Psyke83 sources)
replaced bootlogo
Fixed mass storage ldpi layout
replaced bootlogo
updated sources to CM 9.0.0 - ICS 4.0.4 - RC0
Update 4 - (25-05-2012)
updated kernel to 2.6.32.9-perf Codeaurora
Partially fixed camera (no video and layout still needs ldpi layout) Thanks to Tilal6991
Fixed mass storage ldpi layout
Fixed accelerometer
updated sources to CM 9.0.0 - ICS 4.0.4 - RC0
Update 5 - (07-06-2012)
D-pad fixed
D-pad click fixed
Power key is enabled by default to take pictures (D-pad click takes pictures)
Removed the delay in screen rotation
Added Wifi-Tether.apk for working tethering
Fixed low audio issues
Fixed key layout issues
updated sources to latest
Update 6 - (12-06-2012)
Improved WiFi (now using wpa_supplicant8) Thanks to ejtagle from modaco
built-in Hotstap fixed
WiFi signal fixed
improved performance
updated sources to latest
Use ADW, Launcher Pro or any other launcher to have a good performance
U8120 CWM recovery 5.0.2.3
http://www.mediafire.com/?g0w5k73hdoqrgso
Download Link: Update 01
CM9.0.0 RC0 with Kernel 2.6.32-9-perf
http://www.mediafire.com/file/oiahhr25pvubrfo/cm9-ICS.4.0.3-u8120-signed-update01a.zip
Download Link: Update 02
CM9.0.0 RC0 with Kernel 2.6.32-9-perf
http://www.mediafire.com/file/fh5oj6127sc9tw4/cm-9.0.0-RC0-u8120-KANG-signed-update02.zip
Download Link: Update 03a
CM9.0.0 RC0 with Kernel 2.6.32-9-perf from Huawei
http://www.mediafire.com/?xdadxwjpfpi6616
Download Link: Update 04
CM9.0.0 RC0 with Kernel 2.6.32-9-perf Codeaurora
http://tinyw.in/OLRi
Download Link: Update 05
CM9.0.0 RC0 with Kernel 2.6.32-9-perf Codeaurora
http://www.mediafire.com/?3k497l8kvdjy9ir
Download Link: Update 06
CM9.0.0 RC0 with Kernel 2.6.32-9-perf Codeaurora
http://www.mediafire.com/?u2if1wf2xvs4wyk
Other U8120/U8100/U8110 Rom's (from Ainster)
All Huawei U8100/U8110/U8120 ROM's in one place
Very good rom.You are god ....thank you and happy New Year
a great job. Thank you ..
keyboard, contacts, usb mass storage does not work ..
but it's all good ...
happy new years
Everything works great, only home button is not working, hope you van fix it in next update
Happy new year! Thank you for your work!
Thanks for your work!!
Happy NY!!
I've just returned to CM7 yesterday...
Happy New Year everyone!
Happy New Year, I will download the ROM and test reports an error!
524887357c said:
Happy New Year, I will download the ROM and test reports an error!
Click to expand...
Click to collapse
On the flight mode automatically restart
Wrong keyboard layout
Phone displays forced to close, you can normally broadcast phone, can not hang up, hang up the keys can not hang up
Can install the software correctly
Normal notification bar
No ROOT privileges
Normal Internet access (data)
On the card can be SDCARD normal import phone contacts
Stuck running HyperTerminal
sdcard can not mount to the computer
USB connection no display
Hang up dial-up can not be used to determine the key
I'm sorry my English is not good, I use Google Translate
524887357c said:
On the flight mode automatically restart
Wrong keyboard layout
Phone displays forced to close, you can normally broadcast phone, can not hang up, hang up the keys can not hang up
Can install the software correctly
Normal notification bar
No ROOT privileges
Normal Internet access (data)
On the card can be SDCARD normal import phone contacts
Stuck running HyperTerminal
sdcard can not mount to the computer
USB connection no display
Hang up dial-up can not be used to determine the key
I'm sorry my English is not good, I use Google Translate
Click to expand...
Click to collapse
I have root privilege on my case, but my market disappeared.
It appear once on the launcher top right corner and disappeared...
Gallery impossible to run due to lots of 3D effects. SUPER LAGGY
Android Version Easter egg is gone.
A very good start for a alpha 1.
On alpha 1:
Works:
-Boot
-Overclock (SetCPU)
-Wifi (fast connect )
-GSM calls (phone.apk FC)
-SMS (display only phone numbers, not contact names)
-Root privileges
Don't works:
-Camera
-I don't have market
-Gallery
-ADB
-SD-card mount to PC
-Built-in browser (opera mobile works)
-ScreenShot taking
Great!!!
I can hardly wait for first beta release
Really great work! I never expected that there will be a ICS-Rom for the Vodeafone 845 (Huawei U8120)!
Some bugs I found and you didn't mention in your post:
Market missing. Manually installed market chrashes at start (tried to apks).
Phone app force closes - no chance to cancel the call anymore
minor layout problems in startscreens: I have put the energy settings widget in the first row and an icon in the second row. Now the icon is a little bit covered by the widget
PLS UPDATE this rom!!!
Good ROM, it works really good and i hope the alpha 2 comes soon
Hey, man, you are the best, your ROM is very good
Update 01
ICS 4.0.3 - Cyanogen Mod 9.0.0 – U8120 -update 01
CM9.0.0 RC0 with Kernel 2.6.32-9-perf
Download link: http://www.mediafire.com/file/oiahhr25pvubrfo/cm9-ICS.4.0.3-u8120-signed-update01a.zip
Update1
lights fixed
SD card mount fix
adb fix
keyboard layout fixed
updated kernel
updated to latest CM9 sources
Downloading to try - thanx
joilaroi said:
ICS 4.0.3 - Cyanogen Mod 9.0.0 – U8120 -update 01
CM9.0.0 RC0 with Kernel 2.6.32-9-perf
Download link: http://www.mediafire.com/file/oiahhr25pvubrfo/cm9-ICS.4.0.3-u8120-signed-update01a.zip
Update1
lights fixed
SD card mount fix
adb fix
keyboard layout fixed
updated kernel
updated to latest CM9 sources
Click to expand...
Click to collapse
Hey, guy, please post your CM7 CM9 link to add this inside, I found a lot of people do not know do you work for the CM9, I wish you a happy life! I use Google translate, my English is not good
---------- Post added at 12:37 PM ---------- Previous post was at 12:08 PM ----------
Hey, guy, I tried your UPDATA1, touch screen does not work, boot can not open the lock screen, I can not be tested, please fix
ji
524887357c said:
Hey, guy, please post your CM7 CM9 link to add this inside, I found a lot of people do not know do you work for the CM9, I wish you a happy life! I use Google translate, my English is not good
---------- Post added at 12:37 PM ---------- Previous post was at 12:08 PM ----------
Hey, guy, I tried your UPDATA1, touch screen does not work, boot can not open the lock screen, I can not be tested, please fix
Click to expand...
Click to collapse
Screen works...boot too, but RIL not for me
Sent from my Vodafone 845 using XDA App
After many sleepless nights and many wasted weekends we are proud to present
Android 4.0.3 / ICS for Toshiba Folio 100 - Alpha 4
The devlepment of this ROM has been discontinued in flavor for Jelly Bean:
http://forum.xda-developers.com/showthread.php?t=1864774
This is the current state of CyanogenMod 9 for the Toshiba Folio 100
DOWNLOAD:
When using a wrong recovery for the installation the device may not boot any more and will require manual fix. Please use the recovery provided by Nopy.
Alpha 5:
https://github.com/downloads/DerArt...0-2012.04.21-betelgeuse-UNOFFICIAL-signed.zip
MD5: cb59fe654e68762112d726e274e65de3
Bluetooth is broken in Alpha 5 - if you need it please use an older release.
Old versions:
Alpha 4:
https://github.com/downloads/DerArt...0.0-RC0-2012.03.04-betelgeuse-KANG-signed.zip
MD5: 01b8c1f1c8f7e836770601ce7923e739
Alpha 3:
https://rapidshare.com/files/1004577502/update-cm-9.0.0-RC0-2012.02.21-betelgeuse-KANG-signed.zip
https://github.com/downloads/DerArt...0.0-RC0-2012.02.21-betelgeuse-KANG-signed.zip
MD5: 181ee4399796c2891759f8377fce6e82
Alpha 2:
https://rapidshare.com/files/1100655268/update-cm-9.0.0-RC0-2012.02.19-betelgeuse-KANG-signed.zip
https://github.com/downloads/DerArt...0.0-RC0-2012.02.19-betelgeuse-KANG-signed.zip
MD5: 67ad6033ee965c10d5ab7c67a87b4ba2
Alpha 1:
https://rapidshare.com/files/2674919483/update-cm-9.0.0-RC0-2011.01.29-betelgeuse-KANG-signed.zip
https://github.com/downloads/DerArt...0.0-RC0-2011.01.29-betelgeuse-KANG-signed.zip
GOOGLE APPS:
http://goo-inside.me/gapps/gapps-ics-20120224-signed.zip
MD5: 11b5763810edb732379d39b6df9ccbcf
SOURCE CODE:
The git tree is here:
https://github.com/DerArtem/android_device_toshiba_betelgeuse
https://github.com/nopy/android_device_toshiba_betelgeuse
Kernel sources:
https://github.com/DerArtem/android-tegra-nv-2.6.39
Things that work:
Kernel 3.1
HQ Video acceleration
Audio over Speaker
Audio over Headset
Audio over HDMI
HDMI Video
Camera - reported as front and back camera
3D acceleration
Bluetooth
LP0 Suspend
Wakeup from LP0 Suspend
Internal USB
USB Host Port
Acceleration Sensor
Power Button
Volume Keys
Touch Screen
Wifi
Brighness regulation
Internal and external SD
3G using Huawei dongles (may need some improvements)
Vibrator
miniUSB Hotplug
Docking station
Audio jack switch
Internal microphone (sound is little quite yet)
A2DP Audio over Bluetooth
Things that don't work yet:
SCO Audio over Bluetooth
Digital Compass (Android lib not finished yet - Kernel part finished)
Touch Buttons (no interest to make them work as they are not required for ICS)
Remote control - initial support added - need more inventigation
Power cable plug detection can take up to 10 seconds
Some people report to have a bad HDMI audio
Audio may knocking sometimes
Installation:
Install the recovery provided by Nopy using fastboot.
Copy everything on the the SD card and install the ROM using the recovery.
You may have to reformat all your partitions using the recovery.
Do a full wipe before installing this ROM.
Credits:
DerArtem
Nopy
The Cyanogenmod Team
The other Tegra Dev Teams where we have borrowed code (Adam, GTab, Vega, AC100)
And everybody else who I might have forgotten
If you like this ROM please don't hesitate to hit the donate and thanks button.
Recovery
- IMG format : Flash this recovery using fastboot https://rapidshare.com/files/1261762467/cwm-recovery-5.5.0.4.img
Boot the device using the power + power + power + volume up key combo , then on the PC do in command line :
Code:
fastboot flash recovery cwm-recovery-5.5.0.4.img
- ZIP format : Flash using previous clockworkmod recovery https://rapidshare.com/files/2672749064/cwm-recovery-5.5.0.4.zip
- ZIP format for original recovery : put it in your sdcard, rename it to update.zip , and launch original recovery ( Power, vol+ , then vol+, vol-, vol+ ) https://rapidshare.com/files/1226631729/for-orig-recovery.zip
!!! WARNING !!! Don't reflash this update if your are already on 5.5.0.4
!!! WARNING !!! Don't flash another rom update with this recovery
This recovery use a new mapping, use power to select.
Changelog
A1 ( 29/01/2012 )
Initial alpha
A2 ( 19/02/2012 )
- Switched to audio lib from ventana ( may be better audio over HDMI )
- Better wifi suspend
- Switched to wpa supplicant 8
- Vibrator
- Fixed crazy power button
- Docking station detection
- Tablet identified as Galaxy tab
- 120 dpi by default
- Usb gadget
- Upstream changes
- USB 3G Huawai
A3 ( 21/02/2012 )
- Back to custom audio lib
- Wifi resume fixed
- Headset switch
- Microphone
- Resume in one click on power button
A4 ( 04/03/2012)
- Switch to 3.1 kernel
- Switch to xoom identity
- Folio device setting app ( only allow to choose density atm )
- cifs, ntfs, xbox controller modules
- External USB camera support , and if no usb camera is present , front camera reported twice
- folio does not turn off at 15% charge anymore
- A2DP audio
I just had to say thank u for all yours work thanks to you i have a tablet not a big and slow phone!
We have to wipe data to?
Are gapps inclued?
That's a nice rom. Al things that I use work on this rom. One thing I hope that will work soon is 3G using Huawei dongles.
Thanks for al your work.
anjo88 said:
I just had to say thank u for all yours work thanks to you i have a tablet not a big and slow phone!
We have to wipe data to?
Are gapps inclued?
Click to expand...
Click to collapse
It depends on what version you are comming from - but in generally: Yes a wipe is required or strange things may happen
I have attached google apps. It must be installed seperatly.
Thank you so much for your hard work on this!
I had a problem installing the rom - don't know why, I can't think what I could have done wrong, full wipe as usual. Now the internal sd partition E: seems to be broken, I cannot mount it through cwm and can't access to the recovery I made. I tried installing the last cm9 from the external sd, it boots but then an android notification pops up with the message "encryption unsuccessful", telling me to reset the tablet.
Any hints how could I fix this? Thank you very much!
-Nacho said:
Thank you so much for your hard work on this!
I had a problem installing the rom - don't know why, I can't think what I could have done wrong, full wipe as usual. Now the internal sd partition E: seems to be broken, I cannot mount it through cwm and can't access to the recovery I made. I tried installing the last cm9 from the external sd, it boots but then an android notification pops up with the message "encryption unsuccessful", telling me to reset the tablet.
Any hints how could I fix this? Thank you very much!
Click to expand...
Click to collapse
Same problem here. Looking for the solution.
DerArtem said:
It depends on what version you are comming from - but in generally: Yes a wipe is required or strange things may happen
I have attached google apps. It must be installed seperatly.
Click to expand...
Click to collapse
w
Wich cwm must we use?... need fastboot?.
THANX FOR U WORK
Edit: Using recovery from second post worked!
In case it helps a picture of the moment it starts hanging- sorry for the bad quality!
Thanks so much, but please make the touch buttons work because, even if they're not required for ICS, they're still a good add.
I hope it won't be hard to do so.
-Nacho said:
In case it helps a picture of the moment it starts hanging- sorry for the bad quality!
Click to expand...
Click to collapse
Looks like you have used a wrong/bad recovery. Nopy is currently working on a update.zip with the new recovery.
now I'm getting "Magic value mismatch" so I think I'm one of those that his folio doesn't run anymore, even when flashing other roms. Will the new recovery fix this? or flashing a rom via fastboot could fix it?
I managed to get my Folio back after wrong recovery error.
I just flashed CWM Recovery v3.0.2.8 (which apparently includes a MBR) using fastboot.
After that, I could flash CWM recovery v5.0.2.7 and CM9-r4 2.6.32 rom.
Now I am waiting for the new recovery from nopy to use 2.6.39 build, as CWM v3.0.2.8 can't flash it (assert failed on product.device folio 100)
huh I could fix it flashing foliomod via fastboot
This is simply awesome!!!! Thank you very much!
I own both remote and docking and I'll let you know how them works when this awesomeness will be available for the masses
DerArtem said:
Looks like you have used a wrong/bad recovery. Nopy is currently working on a update.zip with the new recovery.
Click to expand...
Click to collapse
Which recovery is supposed to work for flashing this one ?
new recovery is now on 2nd post by nopy!
@DerArtem and @nopy: do not forget to add the donate button.
roglio said:
@DerArtem and @nopy: do not forget to add the donate button.
Click to expand...
Click to collapse
It's already there in the .html version of xda
CyanogenMod
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android-based firmwares of vendors of these cell phones.
Not Working:
FM Radio
Sources
Device: - https://github.com/SaNek011/android_device_huawei_u8500
Installation
Install ClockworkMod recovery
Boot into recovery using the 3-button combo (Call+Volume Up+Power button)
Wipe (wipe data/factory reset + wipe cache partition)
Install the ROM from the SD card using ClockworkMod Recovery
DOWNLOAD ROM - UPDATE_10
DOWNLOAD CWM
CWM 5.0.2.8 by $aNek011 (Fastboot version)
CWM 5.0.2.8 by $aNek011 (Recovery version)
DOWNLOAD Google Apps
GoogleApps - http://goo-inside.me/gapps
Changes:
Update_10:
Updated CyanogenMod Sources
New Wpa_supplicant v.0.6(Allows you to connect to hidden networks wifi)
Updated Kernel (It has become even more productive)
Patched audio library, new audio filter (sound became clearer) - http://review.cyanogenmod.com/#/c/17091/
-----------------
Update_9:
Updated CyanogenMod Sources (19.06.2012)
------------------
Update_8:
Kernel([email protected] #4)
Added HTC driver vocpcm.c
ZRAM Removed
-----------------------
New boot-logo
Auto-start load_oemlogo
Recompiled opengl
Added RAMZSWAP
Update_7:
Repo sync(14.05.2012)
Added CIFS to kernel
Added TUN to kernel
Working RomManager
Updated RomManager
Updated keylayout
Updated RootExplorer
New Splash Logo Huawei + auto-script SplashLogo
Update_6:
ZRAM(Integrated to kernel)
New libaudio
New Audiofilter
Update_5:
Repo sync (19.04.2012)
Fixed Brightness
Update_4:
Repo sync (18.03.2012)
Enabled JIT
Interface usb modem rndis changed to
Replaced by a camera on the original from the android 2.3.7
Proximity Sensors tweaks
Update_3:
Repo sync(15.03.2012)
New kernel
Optimized apk files
Unlock lock screen by pressing the MENU key - Disabled
New gralloc,copybit,lights,sensors
Update_2:
Repo sync (11.04.2012)
New libaudio
New AudioFilter
Updated kernel
New keylayout and keychars
Thanks
aorth - for device tree
psyke83 - for device tree
tilal6991 - for device tree
BPaul - for helping with development
destruct0r - for assistance in the implementation of htc vocpcm driver
Good work!
Good work! Keep up!
Whats new is in the update7?
______________________________________
[Send by Tapatalk 2 from my u8500]
Posted ClockWorkMod Recovery 5.0.2.8
thanks
My father thanks you
Today should be posted Update 7 By $aNek011!
added UPDATE_7
$aNek011 said:
added UPDATE_7
Click to expand...
Click to collapse
i'll try IT!!
I hope with this update, sygic gps mobile now works....
$aNeK! have you any idea for more of free ram?
not swap
Hi $anek!!
Any idea to work WIFI, because in wifi, options advanced say:
Macadress: no avalaible....
have u activated wifi?
mine is working just fine
NAZUnlimited said:
have u activated wifi?
mine is working just fine
Click to expand...
Click to collapse
yes, but no work!!!
in advanced option say: Macadress no avalaible........
can you help me and teach me , how can you done it?
moche_bcn said:
yes, but no work!!!
in advanced option say: Macadress no avalaible........
can you help me and teach me , how can you done it?
Click to expand...
Click to collapse
The mac isnt available because wifi is disabled
I'll suppose that one of these options is the one u experience
A) u turn wifi on and after a few seconds it say error
B) u turn wifi on and it auto-disable itself even before showing wireless networks or giving any error
Either one, in most cases, result from a bad flashing or the wifi files have the wrong permission, since i dont want to make u go to a goose chase after the permissions, flash the rom again but before do a full wipe (the normal + format boot + system. They are the advanced option) and fix permissions before reboot
Sent from my U8500 using xda premium
Muito Obrigado!!!
I am spanish speaker..
I'll try it!!!
Hi !!
Now work the wifi...
One question?.....
can I change in the nvram.txt,(In the path system/etc/firmware) the
macaddr=00:90:4c:14:43:01 for my macadress of my phone??
Can I add too direct to the folder system/app the current apks from google(googlequicksearch.apk, voicesearch.apk, vending.apk,maps.apk,etc) ? before install...
doing so, Can the ROM works?.....
Funny thing, in the other rom someone asked about the mac address too
In theory, u can do that, i havent tryed that, mine reports the correct mac (some things in every rom are weird, different results for the same kind of phone)
about gapps, yes, u can flash those apps at the system folder but before doing that, check if u have enough free space in that folder. Use the root explorer, enter that folder and see how much free space is there ( it is written above the file listing) and compare with the size of those apps. The rom just needs 10mb of free space in system to boot without any problems. Download the gapps zip for gingerbread and paste them inside the app folder of that zip and flash it. This way, if u want the updated versions of those, u can place them in the zip and flash, the new ones will replace the old ones. Just remember to fix permissions before reboot.
And yes u can flash them after flashing the rom, it wont affect boot just the time it needs to start the 1st time. Will take a minute (give or take) more to boot (more apps mean more time to write the dalvik cache, but it will only do that the 1st boot)
Sent from my U8500 using xda premium
hi
respect to fastboot
What is it for? can you teach me more about ?... forgive my ignorance.....
I just know to install the ROM's and clockwordmod ...
by the way, I installed the CWM 5.5.0.4 of $anek011
Update
I have to install all updates or just the latest?
Just the lastest
______________________________________
[Send by Tapatalk 2 from my u8500]
[INTRODUCTION]
This ROM is based of the joined effort of a couple of devs (Ejtable, Scanno and Brucelee666) who are working on getting JellyBean working for our device. As soon as JellyBean is getting stable, my goal is also to put everything on github, just like i did with VegaCream. This way other devs can also work on this.
Please remember that I, ejtagle and brucelee666 are *NOT* professionals and do this in our spare time. We all have full time jobs and a family. So be happy that there is an Android ROM based on Android 4.1.1 / JellyBean for a device that was sold with Android 2.2 and never had an update.
We do our best to make this ROM as good as possible. With VegaCream we gave you a ROM that gave a new life to your tablet and unleashed its full potential. But we are not wizzards and there might be problems that we cannot solve or do not have time for.
[SPECIFICATIONS]
This ROM is based on AOSP 4.1.1 and the device config made by Ejtagle, brucelee666 and myself.
- INT2EXT+ (Needs a correctly partitioned SDCard)
- zRAM
- DPI is set at 120dpi
- Default JellyBean Launcher installed
- Apex Launcher installed
- Filemanager installed
- Terminal installed
- Google Apps is installed. This means that the Google base is installed and all the apps that are available in the Play Store are not installed (i.e. GMail, Maps)
- All languages that are available in AOSP are included
- Partition layout is the same as VegaCream / VegaICS beta1 / Modded stock
- /system/app, /system/lib, /system/fonts, /system/framework and /system/usr are Squashfs filesystems.
[INSTALLATION]
There are 2 methods of installation. There is a CWM recovery flashable ZIP and a NVFlash file.
I realy recommend flashing VegaBean the first time with the NVFlash version.
Before installing any version, you have to make sure that you have a SDCard that has the correct partition layout:
- First partition is a primary partition formatted as FAT32
- Second partition is a primary partition formatted as EXT4
EXT4 is a linux filesystem so you will need a program that can handle Linux filesystems when you are using Windows.
Before installing the ZIP file make sure that:
- You have the correct partition layout (if you have VegaCream installed, you have the correct layout, if not then use the NVFlash installer. This will repartition your internal memory))
- Copy the ZIP file to your SD-Card
- Boot into Recovery
- Do a FULL WIPE / FACTORY RESET
- Install the ZIP file from your SDCard
- After installing reboot the tablet.
[WORKING]
- WiFi
- Bluetooth (Tested with a A2DP headset)
- Camera
- HDMI including audio
- 3G (only fro the Huawei internal modem, usb modems may work)
- GPS not tested by me, but some say it kind of works.
[CREDITS]
- Ejtagle
- Brucelee666
- Scanno
- LeoP for his zRAM implementation
- Legionaire (for the VegaBean bootanimation)
[DOWNLOADS]
Please do *NOT* use Link2SD anymore. You do not need it. With the INT2EXT script, your apps will install on SDCard by default. Just make sure you have 2 primary partition. First partition *MUST* be a FAT32 partition. The second partition *SHOULD* be EXT4. When upgrading from a previous version, make sure your EXT partition is empty / reformatted. Also when using the NVflash version !!!
Downloads:
https://www.androidfilehost.com/?w=files&flid=118264
[Changelist]
[Beta 6]
- RIL updated to the latest version (3 october i think)
- updated to AOSP 4.1.2
- Added check to see if there is a second partition on the SDCard. If not INT2EXT is not excecuted (PLEASE TEST !!!)
- Updated GApps
[Beta 5]
Changes compared to Beta 3-1:
- New kernel with the following changes:
- Suspend problem solved. Tablet does not enter LP0 anymore
- Compiled with zRAM support
- zRAM modules added
- zRAM implementation from LeoP included
- RIL from ejtagle updated
[Beta 3-1]
- Included int2ext+
- Included bootanimation for legionnaire
[Beta 3]
- Latest RIL from EJTagle
- CM10 keyboard
- Stock browser with the option to set User Agent
- You can now just wipe cache and dalvik-cache when updating from a previous VegaBean version. Please remember that from other version you will have to do a full wipe / factory reset !!!
[Beta 2.2]
What has changed compared to Beta 2
- AOSP updated to JRO03L
- Latest update to the huaweigeneric RIL (from aug 27) by EJTagle
The stripped version has the following apps removed from /system/app compared to the original version:
- ApexLauncher.apk
- PlayMusic.apk
- Talk.apk
- YouTube.apk
The stripped version should give you around 10 MiB extra on /system. So if you have bad NAND problems and have problems booting (not able to) you can try this.
[Beta 2]
- HDMI audio working
- VegaBean bootanimation added by indigolemon
[Beta 1]
- Rotation really fixed and HW acceleration working
- Disable / Enable GPS would crash, fixed (thanks Eduardo)
Alpha 3:
- Rotation Fixed. Portrait mode is working correctly
- 3G files included... Sadly no 3G because of too old version of Huawei RIL. Need at least version 6 and we have version 4. So if anybody can get his / her hands on a newer version, please let us know.
Hey , very nice to see JellyBean here
I have ViewSonic 10s
I am using at this moment VegaICS , so i am thinking to upgrate it to JB. So my questions :
- kernel with hostdriver ?
- is system rewritable?? its Squashfs so i think its not (like VegaICS, no deletable apps...)
- can I update BusyBOX and Superuser ??? (always after i did it , WIFI was brocken and I lost root (VegaICS))
- is it possible to change DPI to normal 160 ??
............................
One more question about CWM
always after installing any Roms via CWM , it booted , but after first reboot/turnoff my device died... only what help is reflashing via NVflash....
So what should i flash first to use a stable-CWM (without killing device)
any suggestions
If you are still using VegaICS, I suggest you switch to VegaCream RC2. It has an NVFlash installer, so you don't have to use CWM at all. It is by far the most stable and fast ROM ever built for our devices, and is 100% feature complete.
This ROM is a beta, and if you have not experienced VegaCream RC2 yet, you should try that first and wait on this for a later release.
rpmccormick said:
If you are still using VegaICS, I suggest you switch to VegaCream RC2. It has an NVFlash installer, so you don't have to use CWM at all. It is by far the most stable and fast ROM ever built for our devices, and is 100% feature complete.
This ROM is a beta, and if you have not experienced VegaCream RC2 yet, you should try that first and wait on this for a later release.
Click to expand...
Click to collapse
ye but its 120 dpi... its horrible and all is toooo small .. can see pixels
What a great ROM, but I've got a problem where my Viewpad don't boot. Ok, it boots the first time after installing it, but not on 2nd boot. I've tried to install it over both VegaICS and VegaCream RC2. Does anybody have a solution? I really want this ROM. I had the same problem on VegaCream in the past, but it I think it works now, but not in VegaBean. I hope I get any help...
Sent from my HTC Sensation, Venom-infected with the ViperS ROM!
2minuutes said:
What a great ROM, but I've got a problem where my Viewpad don't boot. Ok, it boots the first time after installing it, but not on 2nd boot. I've tried to install it over both VegaICS and VegaCream RC2. Does anybody have a solution? I really want this ROM. I had the same problem on VegaCream in the past, but it I think it works now, but not in VegaBean. I hope I get any help...
Sent from my HTC Sensation, Venom-infected with the ViperS ROM!
Click to expand...
Click to collapse
ye its the same problem , flashing with CWM kill your Pad at second boot
thats why i am flashing only via NVflash
Vlad87do said:
ye its the same problem , flashing with CWM kill your Pad at second boot
thats why i am flashing only via NVflash
Click to expand...
Click to collapse
VegaCream works now after flashing it through NVFlash. Could the boot problem have something with an uncomplete CWM or something? Like it "destroys" the important partitions?Since both VegaCream and VegaICS use an unofficial build of CWM with Touch-interface? Mabye I'll try to flash an official version and install VegaBean through there! Will report back if it works!
Nice, will test this out!
2minuutes said:
VegaCream works now after flashing it through NVFlash. Could the boot problem have something with an uncomplete CWM or something? Like it "destroys" the important partitions?Since both VegaCream and VegaICS use an unofficial build of CWM with Touch-interface? Mabye I'll try to flash an official version and install VegaBean through there! Will report back if it works!
Click to expand...
Click to collapse
I can now confirm that flashing VegaBean through official CWM works, and it boots and 2nd boot too... Just download the .zip file at the bottom and follow this guide by me: http://forum.xda-developers.com/showthread.php?t=1597556 or this guide by add.thebad: http://forum.xda-developers.com/showthread.php?t=1041036
Don't forget to hit the "Thanks" button if I helped you out
Link: https://dl.dropbox.com/u/85837377/recovery.zip
Thank you , i will do it then today !
Should i do it better via PC-adb and flash 3.0.2.8 with guide from add.thebad or better your method and recovery OR its just the same recovery 3.0.2.8 just deffirend flash method ???
...........................
Permission request to scanno: can I use his rom as base for Remics-Vega??
Vlad87do said:
Thank you , i will do it then today !
Should i do it better via PC-adb and flash 3.0.2.8 with guide from add.thebad or better your method and recovery OR its just the same recovery 3.0.2.8 just deffirend flash method ???
...........................
Permission request to scanno: can I use his rom as base for Remics-Vega??
Click to expand...
Click to collapse
If you want to use this for a new rom go ahead. Just give the credits for the work done (also ejtagle and brucelee666)
Modifications to the standard AOSP source code can be found on my github. Also the kernel sources are there too.
They are not up-to-date yet.
If you find solutions to problems in the ROM, give them back to the community so they can also be used in other ROMS.
scanno said:
If you want to use this for a new rom go ahead. Just give the credits for the work done (also ejtagle and brucelee666)
Modifications to the standard AOSP source code can be found on my github. Also the kernel sources are there too.
They are not up-to-date yet.
If you find solutions to problems in the ROM, give them back to the community so they can also be used in other ROMS.
Click to expand...
Click to collapse
yes ofc i will.
Is there Host-Driver in the kernel included ?
I am searching developers for Advent Vega device : http://remics.bennz.eu
If you have interests to join Remics-Team pm me!
Vlad87do said:
yes ofc i will.
Is there Host-Driver in the kernel included ?
I am searching developers for Advent Vega device : http://remics.bennz.eu
If you have interests to join Remics-Team pm me!
Click to expand...
Click to collapse
If you mean USB host... Yes it is... On my github there are the sources of the 3.1.10 kernel (based on the rel-15r7 version of nvidia) with the patches ejtagle made. But they are not up to date yet.
As soon as i have time i have to clean up the lunch target of beta1 and do a commit on github. Then you can fork from there and build a version for yourself. If you use the manifest file for vegabean you also get the modifications made to the framework, wpa_supplicant etc to make it all work.
See https://github.com/scanno
Again do not use it yet because they are not up to beta 1.
Thanks for the offer, but i do not have time to do a lot of work and join a development team. For the development of roms for the advent vega i would prefer and suggest that you and the Remics team go to the modaco forum and join the kernel development thread and join the efforts.
This way we have more changes of getting a very good base and from there make ROMS. The more roms to choose from, the better for the people using an advent vega.
Thx for answere, but i dont will compile it , i will use the ready zip file and edit it.
I am not a kernel-developer
thats why i asked you about team
Vlad87do said:
Thx for answere, but i dont will compile it , i will use the ready zip file and edit it.
I am not a kernel-developer
thats why i asked you about team
Click to expand...
Click to collapse
Ok... but again all help is welcome, but you know that. Besides kernel development is done by EJtagle and not by me. He reversed engineerd most of the device specific vega stuff.
Also... /system/lib, /system/framework, /system/usr, /system/app are squashfs filesystems. To access the files in there you have to unsquash them.
do you can tell me programm on windows how to unsquash and again to squash after editing ?
Vlad87do said:
do you can tell me programm on windows how to unsquash and again to squash after editing ?
Click to expand...
Click to collapse
Sorry... I am using Linux and it is available in the repository there. On windows I really do not know. You could Google to see if there are any hits on mksquashfs and unsquashfs. That are the tools used on Linux.
You will need to find a version that supports XZ ( LZMA2) compression. That is the compression algorithm used in vegabean.
This is needed because otherwise the ROM does not fit in the /system partition.
very nice!
7zip can do it under windows - unpack