Installation
1. Flash a recovery image (tested with AmonRA.)
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
or
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
-----------------------------------------this is allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green
I'm doing the ROM on VODAFONE 845 aka HUAWEI U8120 if u try it on another device i dont care it might work but i will remove all unused stuff from kernel later on so it might not work on another devices
U'RE FLASHING U'r DEVICE SO DO NOT BLAME ME IF SOMETHING GOs-AS-S WRONG
I'm using TITANIUM Backup for apps restore it is free on market
Thnks goes to ALL SHARING DEV's ON XDA MODACO and SO on. THNX GUYS.
Original Downloads:
Original Vodafone ROM
Original Vodafone Recovery
ORIGINAL UNROOTED LATEST VF ROM CZ
this is the updata.app released by vodafone redone by me to update it is working as original not rooted
ROOT ONE CLICK
anryl said:
HUAWEI THREADS
Slyking241
-(ROM) 2.3.7-CM7 Huawei U8120--SLYKING241
kallt_kaffe
- [ROM][Huawei U8100]Unofficial CM7.1 (Android 2.3.7) [2011-10-05]
jmcc30
- [ROM][U81XX] Cyanogen mod 6.2.0 Beta 1 [07.09.11]
Lololololololololol
- Vodafone 845(U8120) Rom
joilaroi
- [ROM][Huawei U8120]Android 2.3.3 - Cyanogen Mod 7.0.0 – RC1 - update3
Shiftok
- [ROM] Anroid 2.2 for Huawei u8110 by ShiftOK
cedric123
- ROM [Gingerbread for Huawei u8120/u8110/u8100]---Kernel 2.6.32 Baked Zodiac Cookie
- FROYO CM 6 ROM FROZEN ZODIAC JUICE HUAWEI Vodafone 845
- FRESH ZODIAC FRUIT Custom ROM||HUAWEI U8120 u8110 u8100||vodafone 845||Pulse Mini
tas0s
- CM6 for Huawei U8120 (under development)
- Froyo (2.2) for HUAWEI U8120 [based on AOSP] (under development)
nicoderboss
- [HUAWEI U8100/U8110/U8120] Froyo Kernel Development / Porting (Your help needed!)
freddyemmer
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] Pro Celestial
cas_xp
- [ROM] [Huawei U8100] Froyo Wifi enabled version
kallt_kaffe
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] The Celestial Teapot RLS4d [2010-12-19]
- [ROM] [Huawei U8100] [Froyo] Climbing Mount Impropable beta 1 [2010-10-15]
bitye
- [ROM]FroyoBit for Huawei [email protected] | CM6.2 | 14-03-2011
tahahawa
- [ROM] tahahawa's U81XX Froyo Mod V1.3.5 (Now with OTA) (First U81XX ROM with OTA!!!))
Leito92
- [ROM] V845 custom rom by Leito
hateznemigaz
- [ROM] LR845 v1.9 for Vodafone 845 [Themes] Espresso, Sense mods
Click to expand...
Click to collapse
Rom download links
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanx beerfriends : drak2 , Nate Thorp
ROM Download's //\\aNDROID browser qtadb for apps backup attached platform tools
If u like u allways welcome to donate a beer
fromV858 Android 2.3.7 on 2.6.32.9 ---- ROM
CM 7.1 2.3.7
Anryl said:
IT is based on kallt_kafee work compiled by me
remove animation set compcache 26% disable jit vmheap 24m
no usb to pc use QtADB or similar
oc up to 748
Angry birds all 3 OK
WiFi ok GPS ok
compass ok
no FM radio
BOOT IMG FROM ROM 17-10 boot img with keylayout + speed fixes to try
BOOT IMG FROM ROM 16a-10 boot img with keylayout
BOOT IMG FROM ROM 16-10 key layout fix "auke11 found it" NO WIFI fixing slowly all compilation warnings added Anryl info into kernel
BOOT IMG FROM ROM 15
LINK 14-10-cm-7.1.0-RC1-U8120-Anryl
LINK 12-10-cm-7.1.0-RC1-U8120-Anryl
LINK 10-10-cm-7.1.0-RC1-U8120-Anryl
LINK 8-10-cm-7.1.0-RC8-U8120-Anryl
LINK 5-10 cm7 2.3.7 u8120 KANG GRJ22
--- Kallt_kaffe calibration app flash after rom
--- BOOT IMG for other devices like u8100 u8110 if the rom is not working SOFT KEYS - flash after rom aparently not working
---- BOOT IMG for other devices like u8100 u8110 if the rom is not working SOFT KEYS - flash after rom
Anryl said:
SUPERCHARGER SCRIPT FROM rev16 and up
LATEST GOOGLE APPS
DATA TO SD EXT4 SECOND PARTITION
RECOVERY 5.0.2.6 clockwork u8120
RECOVERY 4.0.1.5 clockwork u8160
Click to expand...
Click to collapse
Click to expand...
Click to collapse
MARKET APPS DOWNLOADS
IMAGES 2.3.7 12-10 ROM
Click to expand...
Click to collapse
TEST BOOT IMAGES
anryl said:
04-10-4
4-10-2 OC 748
4-10 OC 691 from new source
3-10 OC test4
3-10 OC
Test TURBO 3-10
10/2/2011
23/9/2001 3 - OC default 528 reported not workin
23/9/2001 2 - OC default 528 reported not workin
23/9/2011 1 - OC default 600 reported not working on pulse mini
Click to expand...
Click to collapse
joilaroi said:
rev15
Updated kernel to 2.6.32-9 own(based on Huawei u8160)
EXT4 support
OC up to 748 mhz with SET CPU
Fixed PWR key layout
Fixed screen on/off pwr button
usb to pc sd working hotplug
apns removed if u want DATA flash after rom CM7_DATA
no Google apps flash after ROM Google APPS
Linpack single thread 4.8MFlops on 710MHz WIFI ON no apps killed
Linpack single thread 4.7MFlops on 690MHz WIFI ON no apps killed
DOWNLOAD ROM HERE rev.B
DO NOT SWITCH USB TO PC IT WILL JUST PLUG TO PC AND WORK AS SD CARD AND ADB IF U SWITCH U HAVE TO REBOOT IT WILL DO CD ROM AGAIN
DOWNLOAD ROM HERE rev.A
CM7_DATA_ON
CM7_DATA_OFF
Google APPs
NO OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
OVERCLOCK BOOT flash after rom or unpack boot.img and fastboot it or replace in ROM.zip
E-Mail.apk just install it
Click to expand...
Click to collapse
CH based 2.6.32.9 FroYo ROM
anryl said:
CH U8120 beta 5
- camera OK
- video OK
- GPS OK
- FM radio OK
- Alarm install other alarm app as it will reboot system (some permissions?)
- key lights broken
...................... HERE beta 3 and update to beta 5
Click to expand...
Click to collapse
CM 7 here pre-alpha testing fixing only for dev's - ROM THREAD HERE
anryl said:
-recovery HUAWEI ASCEND -from rommanager
-first install task manager to free memory
-then in setting cyanogen set up cpu speed and dalvik and jit
-in setting adwlauncher set swipe down action open notification
-in spare parts set end button
1. setup start provisioning
no : GPS , video , kamera , youtube
yes : ril , wifi , OC up to 748 ....... test it
Click to expand...
Click to collapse
CM 6 here
anryl said:
permission b&w usb2pc fix - test and report
Google APPS flash over rom
HTC_IME apk
4-24-2011 AnrylCM22 few tests like openGL driver and usb drivers - just test it
Preview off rel 14
04-09-2011 AnrylCM14 fixed permissions for market to show apps - video illusion is working for video taking
---------- AnrylCM14_fix after CM14 for fixing with new boot.img for callerID fix
rel 13app ap2SD from market works
04-07-2011 AnrylCM10 usb sd card2pc (partialy) working - still no video taking
04-05-2011 AnrylCM9_1 still no video taking- moded kernel - moded key's only pwr wakeup .......
SetMAC fix programm flash like ROM after rom update do not wipe data
04-04-2011 AnrylCM9 (no video recording)
04-02-2011 AnrylCM8 lights back on (no video recording)(no color playback on youtube and galery....)
04-01-2011 AnrylCM7_2 -- camera + compass -- lights NW
03-31-2011 AnrylCM7 -- camera + compass -- lights NW -- phone call not working mic.
03-23-2011 AnrylCM6 -- rotation fixed working
03-19-2011 AnrylCM3
03-16-2011 AnrylCM2
03-16-2011 AnrylCM1 --- not tested if u dare test it
i'm using attached clockworkmod
recovery
Camera not working
SD from QtADB acessible fine
Sensor not working --- till CM2 on CM3 fixed
Linpack over 5MFlops
Click to expand...
Click to collapse
AOSP development started tas0s HERE any help welcome
anryl said:
3-3-2011 started dev. off aosp on 2.6.29 kernel on the weekend will have beta's BETA ROMS HERE JUST CHECK IT OUT
-- WIFI OK (mac need fix but WPA ok)
-- Dpad OK (leds need fix)
-- calibration OK need calibrate with pen
-- GPS OK (need agps)
-- Gsensor little fcuked
-- camera not working
-- Linpack 5 Mflops
-03-04-2011 AF1
Click to expand...
Click to collapse
FROyO
anryl said:
MOUSE and D-PAD disabled
DO NOT RESTORE DATA APPS BEFORE FULLY TESTING THE ROMgoogle sync will damage wifi
Click to expand...
Click to collapse
TO DO
1: FIX D-PAD - DISABLED
2: FIX SCREEN DRIVER
3: FIX WIFI SLEEP
4: ADD CALIBRATION APPS
anryl said:
kernel 2.6.32.9 moded Over Clocked up to 691 MHz
2/21 release 20.3 few fixes jit enabled jit disabler /\jit enabler
2/20 release 20.2 flash release 20 and update 20.0-20.2 might upload later full rom
2/20 release 20 WiFi TURN OFF after every use otherwise will reboot the device after sleep and turn off wifi
rel20 updates here just flash them over release 20 rom in amonra so no need to wipe- u can use byte tornado to dwnld to sdcard root and then flash
updates
1 - build.prop might use it later with rom updater will see
2 - media my custom boot animation from my avatar
3 - remove my animation from rom
4 - update 20.0 - to - 20.2 fix WiFi sleep
Click to expand...
Click to collapse
anryl said:
OLD releases
2/17 release 8_3 Fixed Wifi MAC finaly i hope
2/16 release 8 _ 2 TEST IT wpa change in system/bin in wpa conf change group wifi to system. enjoy
2/15 release11 WIFI noOK TOUCH-calibration apps OK display driver still fcuked - might work on 8100 reenabled extra key
2/14 release 8 WIFI NOok TOUCH calibration app OK use pen for calibration or smaller fingers
kernel 2.6.32.9 moded Over Clocked 614 MHz
2/13 release 5 on Cas_XP BETA3/2/1 ROM
2/11 release 3 on Cas_XP BETA3 ROM
2/11 release 2 on Cas_XP BETA3 ROM NO WIFI
2/7 release 1 no WIFI on Cedrik FROZEN FRUIT ROM
Click to expand...
Click to collapse
anryl said:
APPS I'm USING ALLWAYS
NAVIGON / Titanium Backup / AndroZip / ByteTornado / FancyWidget 1.3 / Opera Mini /Quick Settings /Root Explorer /SetCPU /Swapper Configurator / Task Manager / Terminal Emulator / Tune In Radio
Click to expand...
Click to collapse
anryl said:
BOOT IMAGES for TESTS u can use on tahawa 2.2 cas_xp 2.2 cedric 2.2 roms
turn off phone hold red volDn power release and connect to pc
just use in LINUX
fastboot flash boot boot5.img
fastboot reboot
or windows
fastboot-windows flash boot boot5.img
fastboot-windows reboot
to recover old boot.img just unpack from old rom and flash it the same way
http://www.4shared.com/dir/nQer4MnT/BOOTimages.html
No 5 and 6
5 - 12-2-2011 up to 691 MHz
6 - 13-2-2011 up to 691 MHz
boot15imgpluscamfixforBeta8tar fix for release8 for WiFi and camera - put libaudio.so into system/lib with rootexplorer and reboot
Click to expand...
Click to collapse
GUIDES
SD CARD SPEED FIX
Code:
init.rc -- ad lines
# sd card read speed fix
write /sys/devices/platform/msm_sdcc.1/mmc_host/mmc0/mmc0:1234/block/mmcblk0/queue/read_ahead_kb 2048
Custom rle attached
gimp save picture as raw -> then
5652rgb < initlogo.raw > initlogo.rle -rle
MODDING ROMS ON WINDOWS
anryl said:
1.download rom u want to use
2.download my batch'es rel2 -- stil fixing them so its just first working test
3. put rom into IN folder
4.run menu.bat
5.extract modify rom ----> In KITCHEN FOLDER
6. extract create sign kopy install
For updates u'l find out
Click to expand...
Click to collapse
MODDING ROMS ON LINUX - kernel - kitchen .....
anryl said:
GIT VF845kernelFroyo
Click to expand...
Click to collapse
dsixda kitchen
HERE discontinued
latest kitchen HERE
Click to expand...
Click to collapse
On UBUNTU 10.10
install java5 all dsixda kitchen thread how to make it run
dsixda said:
Ok, as a last resort (and if you don't want to downgrade your Ubuntu), then download the .bin file for Java JDK 5 (not found in Ubuntu, so you'll need to install it manually). Then, do the following:
Change to the folder that contains your JDK 5 download. e.g. cd ~/Downloads
Do a chmod +x name_of_your_jdk5.bin and then sudo ./name_of_your_jdk5.bin to install it.
Open up the file ~/.bashrc (OR /home/your_id/.bashrc) and add the following at the END of the file:
export JAVA_HOME=path_to_your_jdk5_folder, e.g. /home/dsixda/Downloads/jdk1.5.0_22
export PATH=$JAVA_HOME/bin:$PATH (BELOW the previous line)
Launch a new terminal session by typing "bash" or just type source ~/.bashrc.
Verify your Java 5 (or 1.5) is installed with the command "java -version". Voila!
Click to expand...
Click to collapse
anryl said:
get sdk and ndk or download here the tools only
android-sdk_r09-linux_x86.tar >> put platform-tools files into /bin or make path to them
android-ndk-r5b-linux-x86.tar.bz2 >> put from prebuild linux-x86 bin all files into /bin or make path to them
Click to expand...
Click to collapse
anryl said:
KERNEL source all in terminal cd /where/is/kernel
HERE
CONFIG FILE .config >> file in root of kernel HERE
Cas_XP patch { in root of kernel patch -p1 <../mmc.patch }HERE
OC PATCH HERE
Click to expand...
Click to collapse
anryl said:
.config >> file in root of kernel
DISABLE MOUSE IN .config "# CONFIG_INPUT_MOUSE is not set"
DISABLE OK BUTTON .config "# CONFIG_HUAWEI_FEATURE_OFN_KEY is not set"
Click to expand...
Click to collapse
anryl said:
CREATE zImage in terminal "make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage"
-j4 is for my 4core CPU << this one in base kernel directory will create in arch arm boot "zImage" file that u put into kitchen "BOOT-EXTRACTED" with advanced menu 20 then u redo boot.img in kitchen and with (device power volDN redkey) " fastboot flash boot /where/kitchen/WORKING_date/boot.img " and "fastboot reboot"
Click to expand...
Click to collapse
anryl said:
IF u need the kernel OUTPUT just turn off the phone connect to pc turn on the phone and type "adb shell cat /proc/kmsg > log.txt" so often till its recording the log to finish just press ctrl+c then u'l see the log
Click to expand...
Click to collapse
anryl said:
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- mrproper >> cleans the kernel
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- oldconfig >> cleans just for new config check
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- menuconfig >> create setting GUI
make -j4 ARCH=arm CROSS_COMPILE=arm-eabi- zImage >> create kernel file z_image in arch/arm/bin
Click to expand...
Click to collapse
anryl said:
speed up CM build from 50 min to 15 min
u need 6gb RAM or MORE
u have to make link /dev/shm ~/android/system//out/target/product/u8120/obj
before u make next build delete all directories from obj
it will build it in ram so after reboot it will no longer be there
Code:
#! /bin/bash
#. build/envsetup.sh
#brunch u8120
if [ "$1" = "" ]
then
echo Insert u8100 to make u8120 from u8100 source
wait
else
if [ "$1" = "u8100" ]
then
rm -f -R /home/anryl/android/system/out/target/product/u8120/*
mkdir /dev/shm/obj
ln -s /dev/shm/obj /home/anryl/android/system/out/target/product/u8120/obj
. build/envsetup.sh && USE_CCACHE=1 brunch $1
rm -f -R /dev/shm/obj
fi
fi
Click to expand...
Click to collapse
very good
hi. ive flashed the rom . i will give feedback later
joilaroi said:
hi. ive flashed the rom but it stays in bootloop. i did a wiped data\davik
Click to expand...
Click to collapse
i do wipe before and wipe after flash and allways no bootloop so dont know probably different vodafone devices the rom is fully tested on my device
u can try clockwork 1.8.1.4 pulsemini
anryl said:
i do wipe before and wipe after flash and allways no bootloop so dont know probably different vodafone devices the rom is fully tested on my device
u can try clockwork 1.8.1.4 pulsemini
Click to expand...
Click to collapse
i DID A WIPE AGAIN AND IT WORKED. TESTING IT NOW
THE WIFI IS NOT SEARCHING NETWORKS AND IT SHUTS DOWN
Which differences between your and Cas_XP BETA3 ROM? Only CPU?
mih_88 said:
Which differences between your and Cas_XP BETA3 ROM? Only CPU?
Click to expand...
Click to collapse
kernel for vodafone
the wifi i dont know im testing only on my wpa network at home
Ok, I tested R2. Wifi not worked, but DPAD disabled 100%, so no crashes, not the best, but made the rom usable. I will try R3 now.
Calibration app still missing right?
R3: Wifi works till first reboot after got ERROR! message, and can't reconnect, just searching
Hi anryl,
I've tested your new rom release and:
@U8120
1. Calibration is better on cas_xp rom
2. Full wiped (rom installed twice) and wifi isn't working.. "can't detect networks" and the wifi turns off
Have turned off and turned on the phone but I can't get wifi to work...
3. D-pad 100% disable (good... on cas_xp d-pad click freezes)
4. Camera app now gives an error when trying to record a video, like in cas_xp rom.....
SO, both roms perfectly joined, and we get a "perfect" FROYO rom (with some mods needed by D-pad, keyboard light... and probably some other thing)
Keep the good work
I was thinking and...
May I assume that the "Video Recording" problem is related with something in the kernel because the wifi?
=/ or is this a stupid thing?
i need to manage wifi into cedrics base then it will work camera and wifi after that i need to find the calibration data that i can take 2.1 data and insert into rom dont know where it is yet
Thanks for this post I am not able to make a ROM right now but i hope all issues will be fixed soon.
i only got 2 suggestions.
-Can you make an overclock patch til 691Mhz?
-The d-pad is disabled thats great but can you enable it in the future?
-Fully working wifi
-Perfect calibration for every device.(we can only archieve this with 3 difrent roms cuz the celibnration is on every huawei u81xx phone diffrent
Thank you so much for this ROM
EDIT:::
Hi anryl can you tell the commands how i can start crosscompiling and make my own kernel?
i am runnnung ubuntu 10.10 do i need to install any 3rd party software?
Where is the calibration config in the kernel source.
How can i inplant a .config and mmc.patch?
When i compile the kernel is it a boot.img or a kernel-boot.img file and i need to create the boot img after compiling
Thanks
BTW. if anyone know the answers plz tell me
gona update post 3
anryl said:
gona update post 3
Click to expand...
Click to collapse
Thanks for updating post but i still cant get it working.
When i run commands it says: arm-eabi-gcc not found
and i get thousend of diffrent choises and error.
So cant you explain completly how you compiled the kernel.
I would realy want tthat
cedric123 said:
Thanks for updating post but i still cant get it working.
When i run commands it says: arm-eabi-gcc not found
and i get thousend of diffrent choises and error.
So cant you explain completly how you compiled the kernel.
I would realy want tthat
Click to expand...
Click to collapse
its updated just download the ndk and sdk and put into u'r path or put into bin
or in /home/cedric/.bashrc add last line
"export PATH=/home/cedric/android-sdk-linux_x86/platform-tools:/home/cedric/android-ndk-r5b/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/:/usr/lib/jvm/java-1.5.0-sun:$PATH"
cedric this can help you too
http://www.robmcghee.com/android/compiling-an-android-kernel/
anryl said:
its updated just download the ndk and sdk and put into u'r path or put into bin
or in /home/cedric/.bashrc add last line
"export PATH=/home/cedric/android-sdk-linux_x86/platform-tools:/home/cedric/android-ndk-r5b/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin/:/usr/lib/jvm/java-1.5.0-sun:$PATH"
Click to expand...
Click to collapse
Still having issues will try again tomorrow
cedric123 said:
Still having issues will try again tomorrow
Click to expand...
Click to collapse
if u run ECHO $PATH
u will see the path there is allways /usr/bin so u can copy the files arm-eabi-* to /usr/bin or anywhere where is ur path looking and u copy as well the fastboot adb and so files there as well so it is working allways
if u're done u can type arm-eabi-gcc it should report no input files then all is OK
Related
Hi there!
I made some changes to the samsung stock firmware and i want to share it with you.
I take no responsabilty if your phone explodes or brick!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to: My cedar tree for logo
New Version 3.0 now available in two version!
Features of radioactive tree version (heavy modded):
- Custom bootanimation
- Modded Dialer and Wood Radio!
- JPM Framework (next week i will upload a radioactive with jpq frameworks)
- Perfomance upgrades of stock version
Features of stock version:
-I5800XXJPQ Base the stablest rom ever
-JPQ stock frameworks, faster phone
-JIT enabled
-Odexed for faster apps
-App2SD v2 so no more Link2SD. Many people wanted it
-Maybe new special scripts....
- Fixed lag, multitasking freeze, market installations...
Stay tuned...
CyanoBrozzu is a very fast rom (not the fastest ) Here some of cool functions of this rom:
- I5800XWJPF base = VERY FAST!
- Base ROM will be updated everytime a new stable firmware is released(stable=working)
- 5 LockScreen Mod
- JPM themes and framework support! If phone crashes first time just wait another start and it will work (tested by me with Darkfroyo theme)
- Bash shell
- Jit enabled
- Remount script (just type remount to mount /system rw )
- Prerooted
- Deodexed
- ALL STOCK APPS!!!!
- Htc Themed (Theme by The Dark Lestat)
- Busybox
- Good 2d and 3d graphics performance (Angry Birds works well except some textures, Fruit Ninja is a little bit slow)
- Live Wallpapers
- 25 MB free in /system (I5800XWJPF has no Samsung Apps, if you want it click on Samsung Apps icon and it will download the apk from Samsung site, it's a Samsung decision)
- Extended Power Menu
- NO a2sd! Link2SD (more stable)
v2.0 Final NOW AVAILABLE!!!
-Almost fixed lags after apps installation. I've tried to install shazam while listening to music with stock music player and it lagged just for 3 second after installation.
-Altered minfree settings.
-Fast Reboot (free version) included to completely fix all lags after installation!
-Automatic framework changer. Type theme_changer in terminal to replace framework-res and twframework-res from sdcard (tested with adb and Terminal Emulator)
- Two version: one stock themed (no extended power menu and lockscreen mod), one HTC themed both with JPM frameworks support!
- New scripts: theme_changer (type this in terminal to move framework-res and twframework-res from sdcard to /system/framework), dump (dump your factoryfs.rfs by typing dump )
v2.0 Beta NOW AVAILABLE:
-JIT Enabled
-FuguTweaks
-CWM Recovery
-Modded FMRadio Theme by me. Now is wood style
-ADW Mod Sense Launcher included. More fast than TouchWiz. TouchWiz is still included
-No More a2sd. Replaced with Link2SD. More Space used but more performance (If you want a2sd i will post a tutorial or an alternative version)
-No Wipe update!
-Sense Launcher included. More Stable than TouchWiz launcher.
-Fugumod kernel 2.4 beta3
-Other performance optimizations...
-other ideas... just ask in posts and i'll see what i can do... NO OC posts please
Some Screenshots
Download:
CyanoBrozzu v3.0 radioactive tree ----> Part1 Part2
CyanoBrozzu v3.0 stock version ----> Part1 Part2
CyanoBrozzu v2.0 Final Stock XWJPF frameworks ----> Part1 Part2
CyanoBrozzu v2.0 Final Stock ----> Part1 Part2
CyanoBrozzu v2.0 Final HTC theme ----> Part1 Part2
CyanoBrozzu V2.0 ----> Part1 Part2
CyanoBrozzu V1.0 ----> http://www.megaupload.com/?d=SC2QQMEJ
Issues:
-After changing framework-res the phone will crash first time just reboot or wait for second boot
-Boot will take longer with a2sd enabled
-If an app force gets closed after backup remove data and try to open the app again. Now try restoring backup again
-When an app force closes will vibrate three times. It's a minor bug if an app force closes it's an app fault
Scroll down second post for Flash instructions... & various tutorials
Tips:
- If you want a faster phone don't use link2sd or data2sd and leave all apps on internal memory
- For a faster boot use stock version (Available in hours)
- If you don't want to reboot use Fast Reboot regularly
- Don't leave too much app active and terminate useless apps
- Clean Level 2 RAM regularly
HOW-TO Install 2.0:
1. Extract the RAR file in a folder
2. Open odin in flashing tools folder
3. Click on OPS button and select apollo_0531.ops in Flashing_Tools folder (the same folder of odin)
4. Tick One Package
5. Click One Package button and select OnePackage.tar
6. Poweroff your phone
7. Press Home+VolDown+Power and wait 10 sec~ till you see Downloading... screen
8. Now connect the phone through USB cable
9. When Odin detects phone press Start
10. Now wait 7 minutes~ and phone will boot up
Note: If you have problem after upgrading to CyanoBrozzu 2.0 from another rom I suggest you to do a wipe/factory reset from recovery (Home+MiddleVolume+Power)
HOW-TO Link2sd v2.0:
1. Do the step 3.1 of this guide http://forum.xda-developers.com/showthread.php?t=999856
2. Reboot phone with sdcard in
3. Open Link2SD and link interested apps
4. Open Settings and enable Auto-Link
Link2sd and Titanium Restore:
After enabling AutoLink restore ONLY USER APPS and restore just important system settings or telephone memory will be full.
Bootloops fix (for I5801 & I5800, quote from fourth page)
bootloop after flashing this rom.tried data/cache wipe too.....still cant boot .....
Sent from my GT-I5801 using Tapatalk
Click to expand...
Click to collapse
Ouch! Maybe it could be an issue with i5801 phones. But you cant try this:
1. Flash I5800XXJPF. (i suggest you the version without bootloader)
2. Flash CyanoBrozzu v2
3. After flash in GT-i5801 screen press HOME+MiddleVol+POWER wait for reboot and release keys.
4. When you enter in recovery wipe data and cache
5. Reboot
6. Now it should work (The first boot can take up to 7 minutes just wait)
If you think you are in bootloop try this.
1. Poweroff phone
2. Connect it via usb cable
3. Turn on phone
4. Wait for bootanimation
5. With adb open a shell and type dmesg
6. if a message like modem_ioctl arg=2 appaer you're not in bootloop just wait.
Click to expand...
Click to collapse
thanks.....reverted back to ddjg6 then to --->XWJPF-->your ROM
had to wipe data n cache to boot sucessfully...
Click to expand...
Click to collapse
HOW-TO Change theme (v2.0 final only!):
1. Download framework-res.apk and twframework-res.apk JPM compatible!
2. Move them to sdcard
3. In Terminal emulator or adb type theme_changer (in terminal emulator remember to type su!)
4. Phone will freeze and autoreboot
5. Boot will take longer be cool
6. Your theme is now installed!
I tested this procedure with some themes from here http://forum.xda-developers.com/showthread.php?t=1035775
HOW-TO Install 1.0:
NOTE!!!: ALL YOUR DATA WILL BE DELETED MAKE A BACKUP FIRST!
1. Extract the RAR file in a folder
2. Open odin in flashing tools folder
3. Click on OPS button and select apollo_0531.ops in Flashing_Tools folder (the same folder of odin)
4. Tick One Package
5. Click One Package button and select OnePackage.tar
6. Poweroff your phone
7. Press Home+VolDown+Power and wait 10 sec~ till you see Downloading... screen
8. Now connect the phone through USB cable
9. When Odin detects phone press Start
10. Wait 7 minutes~ and your phone will boot up
11. Now go Settings>Privacy>Factory Reset (IMPORTANT)
12. Wait 7 minutes~ and CyanoBrozzu is now installed!
How To data2sd (v1.0):
1. Do the step 3.1 of this guide http://forum.xda-developers.com/showthread.php?t=999856
2. Reboot phone with sdcard in
3. Data2SD is now enabled
NOTE: NEVER REMOVE SDCARD WHEN PHONE IS ON
Happy Flashing!
nice one...so finally someone releasing a XWJPF based ROM...many people wanted it...all the best for your ROM
Good work! I like the idea of stock rom, only with performance upgrades. I would try it but i flashed yesterday so i dont have the nerves. Keep up the good work!
What about cwm recovery?
Sent from my GT-I5800 using XDA Premium App
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
jazux said:
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
at first even i thought so
the remount script is a very nice idea, i like it
deox91 said:
the remount script is a very nice idea, i like it
Click to expand...
Click to collapse
i'm interested about it too
jazux said:
:-D i read the topic as cyanogen mod and i was stunned :-D stupid me
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
i realized only after reading ur comment and checked back
nice one...so finally someone releasing a XWJPF based ROM...many people wanted it...all the best for your ROM
Click to expand...
Click to collapse
Thanks! I will try to update the base ROM every time a new working firmware will be released.
What about cwm recovery?
Click to expand...
Click to collapse
For now i will try not to add things that can confuse noobs (OC etc...) and can hard brick phone (i experienced the problem )
The remount script is very convenient i use it always!
superfrancy97 said:
Thanks! I will try to update the base ROM every time a new working firmware will be released.
For now i will try not to add things that can confuse noobs (OC etc...) and can hard brick phone (i experienced the problem )
The remount script is very convenient i use it always!
Click to expand...
Click to collapse
you have hard bricked your phone with cwm?
No i didn't! And i know that CWM won't hard brick the phone but for now i don't want do add CWM recovery. Maybe in 2.0 or 2.1...
superfrancy97 said:
No i didn't! And i now that CWM won't hard brick the phone but for now i don't want do add CWM recovery. Maybe in 2.0 or 2.1...
Click to expand...
Click to collapse
ok, thats cool
Are you sure that just flashing over will delete our data? I had a softbrick the other day and just flashed XWJPF without any loss. Just had to root and enable some modes I had.
I put a datafs.rfs in One Package file to auto-wipe and avoid problems but if you flashed succesfully under JPM i can try to create a no wipe version.
deox91 said:
- Remount script (just type remount to mount /system rw )
Click to expand...
Click to collapse
how does it work?via init.d?
dxdiag32 said:
how does it work?via init.d?
Click to expand...
Click to collapse
its a file which contains the remount code
Code:
mount -o remount,rw /dev/block/stl6 /system
and is placed in /system/bin/ ; chmodded 755 that you can run it
if you have named the file "remount" then you only have to enter "remount" in the terminal emulator or via adb shell... if you have named the file "a" you have to enter "a" and so on..
its a file which contains the remount code
Code:
mount -o remount,rw /dev/block/stl6 /system
and is placed in /system/bin/ ; chmodded 755 that you can run it
if you have named the file "remount" then you only have to enter "remount" in the terminal emulator or via adb shell... if you have named the file "a" you have to enter "a" and so on..
Click to expand...
Click to collapse
Yes it is you thinked a different thing?
superfrancy97 said:
Yes it is you thinked a different thing?
Click to expand...
Click to collapse
no i thought exactly that
dxdiag32 asked how it works and i explained it to him
New U 8160 ROM was released by huawei Vodafon Android 2.2.1 kernel 2.6.32.9-perf
Its working perfectly on our phone just the wifi will have to be fixed
Installation
1. Flash a recovery image (tested with AmonRA.) and ascend from rommanager or clockwork
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
or
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
-----------------------------------------this is allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY pwr+vlUp+green
I'm doing the ROM on VODAFONE 845 aka HUAWEI U8120 if u try it on another device i dont care it might work but i will remove all unused stuff from kernel later on so it might not work on another devices
U'RE FLASHING U'r DEVICE SO DO NOT BLAME ME IF SOMETHING GOs-AS-S WRONG
I'm using TITANIUM Backup for apps restore it is free on market
Thnks goes to ALL SHARING DEV's ON XDA MODACO and SO on. THNX GUYS.
Original Downloads:
Original Vodafone ROM
Original Vodafone Recovery
anryl said:
HUAWEI THREADS
joilaroi
- [ROM][Huawei U8120]Android 2.3.3 - Cyanogen Mod 7.0.0 – RC1 - update3
Shiftok
- [ROM] Anroid 2.2 for Huawei u8110 by ShiftOK
cedric123
- ROM [Gingerbread for Huawei u8120/u8110/u8100]---Kernel 2.6.32 Baked Zodiac Cookie
- FROYO CM 6 ROM FROZEN ZODIAC JUICE HUAWEI Vodafone 845
- FRESH ZODIAC FRUIT Custom ROM||HUAWEI U8120 u8110 u8100||vodafone 845||Pulse Mini
tas0s
- CM6 for Huawei U8120 (under development)
- Froyo (2.2) for HUAWEI U8120 [based on AOSP] (under development)
nicoderboss
- [HUAWEI U8100/U8110/U8120] Froyo Kernel Development / Porting (Your help needed!)
freddyemmer
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] Pro Celestial
cas_xp
- [ROM] [Huawei U8100] Froyo Wifi enabled version
kallt_kaffe
- [ROM] [Huawei U8100/U8110/U8120] [Eclair] The Celestial Teapot RLS4d [2010-12-19]
- [ROM] [Huawei U8100] [Froyo] Climbing Mount Impropable beta 1 [2010-10-15]
bitye
- [ROM]FroyoBit for Huawei [email protected] | CM6.2 | 14-03-2011
tahahawa
- [ROM] tahahawa's U81XX Froyo Mod V1.3.5 (Now with OTA) (First U81XX ROM with OTA!!!))
Leito92
- [ROM] V845 custom rom by Leito
hateznemigaz
- [ROM] LR845 v1.9 for Vodafone 845 [Themes] Espresso, Sense mods
Click to expand...
Click to collapse
links
To reply in this thred :
Device : u8120 Recovery: Ascend 3.0.0.5 Fully wiped + installed rom
WiFi and Bluetooth not working , Alarm + missed call sms gmail - reboots android , Batery life not good
sound ok phone calls ok sms ok
thanx
Click to expand...
Click to collapse
19-06-2011 attached boot.img with changed kernel OC no Dpad no Mouse - extract and / pwr+red+voldn / fastboot flash boot boot.img / fastboot reboot
18-06-2011 First working test NO WiFi , Camera 2Mpx
zipalligned rooted deodexed good calibration
use another alarm app like alarmdroid
Click to expand...
Click to collapse
Info and other hacks
# 1 link for fixes like sdcard speed and custom img
# 2 link Coocking compiling guide CM7 by sykopompos
I have pointercal files to fix calibration for U8110 and U8100. These fix calibration on the devices. I'm about to fix calibration in my ROM by making flashable .zips. Also the MMC.patch and oc patch for the kernel, will it work on this kernel if we source?
If we get the source it will OC
Sent from my Vodafone 858. 852 using XDA Premium App
Device Config to build ClockworkMod Recovery in CyanogenMod for the Huawei U8160 (Vodafone 858 Smart) helps?
im downloading and flashin in u8110 asap to see how it goes
Gjole86 said:
Device Config to build ClockworkMod Recovery in CyanogenMod for the Huawei U8160 (Vodafone 858 Smart) helps?
im downloading and flashin in u8110 asap to see how it goes
Click to expand...
Click to collapse
we have working ascend recovery so no need for that we need to fix the wifi and the camera is just 2MPx
Well camera is not big deal, coz its crap even on VF845, and I dont think it will make big difference here.
EDIT: Tested on Huawei U8100. Work as expected - relatively smooth, stable, calibration bit off but still nicely usable (maybe coz its not U8120). Wifi doesnt work as expected. No Adreno drivers. But it looks promising.
Bluetooth does not work in this rom... Audio - white noize, replaced libaudio.so of tahahawa rom.
it reboot phone after missed call and received sms?
Shiftok said:
it reboot phone after missed call and received sms?
Click to expand...
Click to collapse
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
verified. nice rom though
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
Any ideas for fix this bug?
and another old bug - the phone goes to bootloop when battery power is low (about 15% less)
gixandr said:
Bluetooth does not work in this rom... Audio - white noize, replaced libaudio.so of tahahawa rom.
Click to expand...
Click to collapse
Shiftok said:
it reboot phone after missed call and received sms?
Click to expand...
Click to collapse
gixandr said:
Yes.. lockscreen on + missed sms/gmail/call = reboot :-( Old bugs of CH rom
Click to expand...
Click to collapse
gixandr said:
and another old bug - the phone goes to bootloop when battery power is low (about 15% less)
Click to expand...
Click to collapse
i dont see what models what recovery and so on check 2nd post
change kernel from nomouse no dpad source
attached boot.img on 2nd post
Any news about this rom?
hi,anryl.
someone told me,Android 2.2 Kernel with Basband Version 2210 have some bugs,like recive sms will reboot phone.
I think may be is helpful for you.
No time here i'm helping HERE
OMFBG port by Meler
This is my Port of OFMGB Hero rom with my mods.
Statusbar settings is in God Mode app.
Bulletin Board, t3hh4xx0r Addons, OMFBG Nightlies i OMBG Build in God Mode isn't work on Magic and i will delete it in new version,
Launcher Settings is for stock Gingerbread launcher ,which does not exist on rom
Lockscreen, Ui i Status Bar Setting in God Mode appl is for configurei Lockscreen, UI and Statusbar
After install rom on Status bar and lockscreen is Hero OMFGB text, If you change this text (ex. your network) turn on God Mode app - Statusbar Settings - Carrier caption, and type your name.
in next version will I add additional themes for Theme Chooser (question to install in install rom)
My rom support custom mtd partirion. if you will more spaces on phone storage you can enlarge it to 270 mb
1. Download this files:
Partition layout - http://www.multiupload.com/TDV406PML2
boot patch for v1 - http://www.multiupload.com/0G3NVSC5R2
boot patch for v2 - http://www.multiupload.com/VVM6X0Z9EX
and copy to your sdcard
2. Flash Partition Layout.zip in recovery, after flash phone rebooted in to recovery
3. Flash my rom
4. Flash boot Patch.zip and reboot phone with data partition 270 mb
5. Fixing market. Open Terminal Emulator (in Dev Tools) or connect phone to Pc and turn on adb shell and type in turn this commands:
su
mkdir /cache/download
chown system:cache /cache/download
chmod ug+rwx /cache/download
chmod a+x /cache/download
Changes:
v2.0
- base - OMFGB v1.3.1 R2 - Changes the author:
*ROM rebuilt from 25/08 nightly build
*All updates from T3hh4xx0r source
*Optimized ROM a little
*Reverted to T3hh4xx0r boot anim (faster boot time)
*Improved sound latency and quality
*God mode updates - new interface and some options
My changes
- improved updater-script
- update su and SuperUser app to version 3.0 beta 4 - interface is similar to New android Market
- Add market and apn-config - this was not in new build
- improved Bluetooth
v1.0
- base - OMFBG v1.3.1 r1 B2
- kernel 2.6.34.4 by carz 12
- Android 2.3.5
- update google maps (v5.9.0) and YouTube (2.2.16) to newest version
- add sellection menu at rom installation. 1. Choose Launcher Pro or Adw Launcher, 2 Choose destiny of rom default 160 new 140
- God Mode app
- updated Oi File Manager
- GPS i USb tethering working
- Theme Chooser + HTC Elegance theme
- Audio Para hack
Download:
v2.0
http://www.multiupload.com/1FUDK6RMWE
v1.0
http://www.multiupload.com/EJISKRHRRX
Thanks for:
JieeHD for ROM
carz12 for kernel
yoshua for yesno and watch to updater script , then i modifed to my rom
wow new rom.........downloding to tray
thanks
I wait for tests and sugestions
supports custom mtd partition?
Yes, i add info in first post
arekmelerski said:
Yes, i add info in first post
Click to expand...
Click to collapse
this is wonderful news =) =)
After install at instruction on first post we have 270 mb in data
It's taking too long to install.
Is it normal?
arekmelerski said:
After install at instruction on first post we have 270 mb in data
Click to expand...
Click to collapse
works perfectly only problem is:
. blacklight button does not always work (usual problem of the hero rom)
I placed the logcat ;-)
I know, . Keys backlight work sometimes (ex id we change brightness display) i don't know how fix it ;/
arekmelerski said:
I know, . Keys backlight work sometimes (ex id we change brightness display) i don't know how fix it ;/
Click to expand...
Click to collapse
Unfortunately, even I know how to fix it = (you could try asking carz12 or Hintay seen that the port has solved its
I send PM to carz12 and Hintay and wait I for answer
Can't download any app from the market with custom MTD. It starts downloading and after some time it stops with fail error.
Tried in ADB
adb shell
su
cp -a /dev/cache/download /cache
But it comes out with an error saying: can't stat /dev/cache/download: No such file or directory.
Also sometimes during boot it just stucks, pulling battery is the only solution to solve it, then it boots normal. Other then that it's running fluid and fast.
in adb type
1. su
2. mkdir /cache/download
3. chown system:cache /cache/download
4. chmod ug+rwx /cache/download
5. chmod a+x /cache/download
and market works fine
on next version i fix this bug
I have no mtd partition I can install does the same?
yes, you can install without mtd
Install only rom
New version in first post
" MerrukTechnology Kernel Final Version 1.0.8 "
Hello Everybody's.
I am New in XDA-DEV this is my first day (I HAVE 3 WEEK'S NOW) & my first post was a NEW CUSTOM KERNEL for Samsung Galaxy Y in a thread on General Section, it was just a test. but we to got a perfect kernel for this Device.
We Need Testers and devs to help with ideas or anything you can.
Let's talk about this kernel.
-----------------------------------------------------------------
For now we dont have much but we can do more :
--------------------
FEATURES :
Swap Support.
Some Bug Fixes.
CPU Spy App Fix.
Game-Port Modules.
Graphic Engine Driver.
Security Patches Added.
TUN/TAP, Virtual Adapter.
Added USB CORE Support.
HID, EHCI, OHCI, Support.
VibeTunz (TM) Technology.
MERRUK Tempfs for SU Binary.
EXT2/EXT3 & EXT4/JBD2 support.
SD-EXT Support, System & Recovery.
CIFS Support. (Mount Shared Folders).
NETFILTER Compatibility with DROIDWAL.
Recouvery in Read/Write mode & [ADB Root].
Added IO Scheduler. (Deadline, CFQ, VR, SIO).
BLMUNLOCK Added, & a Script to run it at boot.
INIT.D Support & Auto Create init.d in /system/etc.
BusyBox Support PreInstalled (Busybox binary in /sbin).
Root Support [ADB Root] & PreInstalled (SU binary in /sbin).
Added MFC, (MULTI FORMAT CODEC) Firmware From Samsung.
Multi-language Module Support For UTF-8 on CIFS Mount Shares.
/Cache and /Data, Can be mounted as EXT4. (/System Need's Fixes).
Add The Permanent Modded / Fixed CloclWorkMode Recovery. (V.5.8.0.2).
Mount SDCARD WITH EXT4 FS Supported (You Need to Format it With EXT4).
New J4FS SUPPORT. (We Can Mode it to have our new optimized j4fs rw filesystem).
Modules for VPN/IPSec Support. (IPsec AH, IPsec user configuration interface, IP Tunneling, )
Added CPU Governor Feature. (SmartassV2, Conservative, Ondemand, Powersave & Userspace, etc...) (Not All of them for now)
------------------------
DEBUG SCRIPTS ADDED FOR SYSTEM & RECOVERY.
FIXES SCRIPTS ADDED FOR SYSTEM & RECOVERY.
IMPORTANT MODULES LOAD'S NOW AT BOOT.
Plus A Lot of Other Improvements & Fixes.
Click to expand...
Click to collapse
-----------------------------------------------------------------
TODO LIST :
USB OTG Driver.
A2SD Complete Support.
DROIDWALL App Fully Working.
Overclock/Undervolt Tricks Support.
Modded ZYGOTE Service for Detailed Catlog.
Increase Internal Memory UP, /Data now is on SDCard.
Click to expand...
Click to collapse
Please give me a list of toto's for the next versions,
-----------------------------------------------------------------
HOW TO INSTALL :
Instructions :
1 : Put the Ext4.zip on Your SD-Card. (SKIP IT : NOT RECOMMENDED FOR NOW)
2 : Extract The Content of Sustem.zip to the Root of your SD-Card (DRIVE_LETTER:/system). LINK ADDED BELOW.
3 : Flash the Kernel Via Odin (YOU CAN DO WHAT YOU WANT THERE IS MANY OTHER METHODS).
4 : Boot into CWM Recovery.
5 : Install Ext4.zip.(SKIP IT : NOT RECOMMENDED FOR NOW)
6 : Wipe DATA & CACHE (NOT NEDDED BUT PREFERABLE).
7 : Don't Worry @ The First Boot, You Need To Reboot TWICE.
8 : Check the Stability & Speed.
9 : ENJOOOOOOY.
FOR THE 1.0.8 VERSION AND ABOVE:
You will see a new folder on the rot of the SD Card Called (scripts)
this folder is for the scripts you want add them into init.d folder.
all you need is put the scripts you want into it and reboot twice.
-----------------------------------------------------------------
IF YOU GOT PROBLEMS PLEASE GO BACK TO THE STOCK KERNEL : http://www.mediafire.com/?2o40bhqa6dfnfzt
-----------------------------------------------------------------
OLD WORKING VERSIONS : SOME VERSIONS ARE DELETED FOR SECURITY REASONS (Borocken)
ALPHA VERSIONS :
Version 0.5.2 ALPHA.
Version 0.5.7 ALPHA.
RC VERSIONS :
Version 0.6.80 RC.
Version 0.7.00 RC 10.(1Ghz but Lag)
Version 0.7.50 RC 20.(900Mhz FIXED SD_CARD Probleme)
Version 0.8.50 RC 10.(A2SD, SU, Busybox, Data on SD. - Steel need fixes -)
RC/CWM VERSIONS :
Test Version CWM.
Version 0.8.70 RC 80, Have CWM.
PRE-BETA VERSIONS :
Version 0.9.90 PRE-BETA.
Version 0.9.98 PRE-BETA.
BETA/CWM VERSIONS :
Version 1.0 BETA 1.
Version 1.0 BETA 2.
FINAL VERSIONS :
Version 1.0.0 FINAL.
Version 1.0.1 FINAL.
Version 1.0.5 FINAL. (have a bug need to wipe data )
Version 1.0.8 FINAL. (Sdcard not mount at boot for all roms)
Version Pre-2.0 FINAL. (Awesome Great Stable Version)
For the Pre-2.0 see here : http://forum.xda-developers.com/showpost.php?p=25942858&postcount=2735
And Here the beginning : http://forum.xda-developers.com/showthread.php?t=1550065&page=270
-----------------------------------------------------------------
NEEDS :
Any help can add stability and features to this kernel.
-----------------------------------------------------------------
INSTRUCTIONS :
Please See The Post #3 (Thank you ronnieryan).
-----------------------------------------------------------------
I WILL UPDATE THE LINKS LATER :
Ext4.zip Download it from here : http://forum.xda-developers.com/attachment.php?attachmentid=965364&d=1332723141
-----------------------------------------------------------------
USE IT AT YOUR OUWN RISK IT'S WORKS AND CONFIRMED FROM ALL TESTERS BUT ... -----------Please Report !!! and do not fogot THANKS.
-----------------------------------------------------------------
MERRUK TECHNOLOGY V.2.0 Kernel Sources at GitHub :
https://github.com/Maroc-OS/Merruk-Technology
Download From Attachement.
[CUSTOM][KERNEL] MerrukTechnology Kernel v.0.1 ALPHA 1 For Samsung Galaxy Y GT-S5360.
Reserved For Later.
BTW: Some Infos About this phone.
--------------------------------
Samsung Galaxy Y
(Model: GT-S5360)
--------------------------------
px
Manufacturer Samsung Electronics
Series Samsung Galaxy
Successor Samsung Galaxy Pocket
Type Touchscreen smartphone
Dimensions 104 mm (4.1 in) H
58 mm (2.3 in) W
11.5 mm (0.45 in) D
Weight 97.5 g (3.44 oz)
Operating system Android 2.3.6 (Gingerbread)
CPU Broadcom BCM21553 ARMv6 832 MHz processor
GPU Broadcom BCM2763 VideoCore IV LPDDR2 128MB (neocore: 45.5fps), 1 gigapixel fill rate, 40nm
Memory 290 MB RAM
Storage 190 MB (158 MB user available)
Removable storage 2 GB microSDHC (up to 32 GB)
Battery Li-ion 1200 mAh
Data inputs Multi-touch touch screen, headset controls, proximity, magnetometer, accelerometer, aGPS, and stereo FM-radio
Display 240×320 pixels, 3.0 inch (133 ppi pixel density) TFT capacitive touchscreen, 256000 colors, 60Hz Refresh Rate
External display Main Middle Button
Rear camera 2 Pixel Megapixel, 1600×1200 Fixed Focus, 15 fps QVGA 320x240px video recording and stills, Panorama & Smile Shot
Front camera None
Connectivity 3.5 mm TRRS; Wi-Fi (802.11b/g/n); Bluetooth 3.0; Micro USB 2.0;
----------------------------
Thank's to the Moderator (PG 101)
Press Thanks For Maroc-OS & Rate 5 Stars
Files Needed :
Odin 3 v1.84
Odin 3 v1.85
Samsung SGY Drivers
Click to expand...
Click to collapse
Versions:
Test Kernel
Alpha v0.1
Alpha v0.5.2
Alpha v.0.5.7
V0.6 RC 80
V0.7 RC 10
V0.7.50 RC 10
V0.7.50 RC 20
V0.8.50 RC 10
V.1.0_Beta_1
V 1.0.0
V 1.0.1
V 1.0.5 [For Flashing via mai77 method here's the boot.img ONLY]
V 1.0.8 [For Flashing via mai77 method here's the boot.img ONLY This Kernel Needs the 1.0.8 System]
MerrukTechnology 2.0
Merruk 2.5(boot.img only)
Click to expand...
Click to collapse
Flash Kernel Via CWM by mai77(My Prefered Way
Download the following and place to the Root Of SD card
CWM
KernelUpdate.zip
Ext4
MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
System 1.0.8
(Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)
Now we are all set
1. Turn off phone and boot into CWM
(Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
(Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
3. After successful kernel up press power to return to CWM
4. Press Reboot now, and your kernel is updated
5. Reboot twice and it will automatically delete the system folder in SD card
6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
7. Press power to return to CWM and Press Reboot now
Click to expand...
Click to collapse
OR
INSTRUCTIONS :
Short PDA Flashing Guide
- download the .tar file
- install Kies, or Samsung driver pack
- download Odin3 1.84 or 1.85 (download links above)
- stop Kies
- stop all active ADB sessions
- start odin
- power off Your SGY
- boot into download mode
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- in the PDA field, browse for the kernel tar
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
Click to expand...
Click to collapse
Apps Needed
A2SD
Droidwall
No-Frills CPU
CPU Tuner
Click to expand...
Click to collapse
If Ever Problem Occurs, Just Flash Back To These Kernels
Stock XXLA2
Stock DXLA1
Terma Kernel
Test Kernel
Click to expand...
Click to collapse
How To Get Logcat For Windows User
bumslayer said:
Here's how to do a logcat, providing you have installed android sdk.
1. Turn off your phone (if stuck, just remove the battery).
2. At your command prompt, do "adb logcat > logresult.txt".
3. Plug your phone to your usb and power it.
4. After at least 1-2 minutes or until the phone has fully booted up, terminate your logcat session (ctrl+c).
By then you have created a logresult.txt which contains your logcat entries. PM your results to the devs.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
do we flash it as pda?
Tested your kernel with no frills cpu but I don't have the governors you mentioned. Is the kernel you posted here the same one or is it your latest compile?
Sent from my GT-S5360 using xda premium
<post deleted>
Will try and report
A2sd needed hehe just wish u will put it in ur kernel list
Maroc-OS said:
Hello Everybody's.
I am New in XDA-DEV this is my first day and my first post was a CUSTOM KERNEL it was just a test. but we collaborate all of us to get a perfect kernel for this Device.
We Need Testers and devs to help with ideas or anything you can.
Let's talk about this kernel "MerrulTechnology Kernel v.0.1 ALPHA 1".
For now we dont have much but we can do more :
EXT2/EXT3 & EXT4 support.
Added /Data mount, IO Scheduler and CPU Governor Feature.
System/Cache as EXT4 R/W, & Data as EXT4 R/W too. (Need Fixes)
Conervative,ondemand,powersave governors are enabled.
NETFILTER cOMPATIBILITY with DROIDWAL
FLASH with ODIN.
Please Report !!! and do not fogot THANKS.
-----------------------------
USE IT AT YOUR OUWN RISK IT'S WORKS AND CONFIRMED FROM ALL TESTERS BUT ...
Download From Attachement.
Click to expand...
Click to collapse
Sent from my GT-S5360 using XDA App
Downloading it now. I will flash it tomorrow I don't have a computer at hand at the moment.
Sent from my GT-S5360 using xda premium
thanks again for your GREAT GREAT work.i think these should be some must have feautures for start:
init.d support
overclock
governors
auto-mount ext partition in recovery
<post deleted>
@Maroc-OS good work man!!
With this kernel can get cm7??i flash this kernel when is finish
hey again,
am working on overclock and governors now
chek DROIDWALL please
<post deleted>
Maroc-OS said:
hey again,
am working on overclock and governors now
chek DROIDWALL please
Click to expand...
Click to collapse
Thanks dude when will you release the oc'ed version?
Thanks a lot!
I Can Test It..Can Anyone Tell MeHow Can I Flash This Kernel Using Odin..Please Tell Me How To Do Please Someone..
abhirockz said:
I Can Test It..Can Anyone Tell MeHow Can I Flash This Kernel Using Odin..Please Tell Me How To Do Please Someone..
Click to expand...
Click to collapse
1) download the boot.tar image from the first post
2)connect your phone via USB, open odin...select the pda as the downloaded boot.tar
3) uncheck the auto partition
4) Click start
5)wait till finish
If you have problem mr creed(have experience),sakindia(he created a kernel) or more dev can help you
V.0.4
test this One whith OverClocking/Undervolt & Some Corrections on Governor.
DELETED!!!
DON'T USE IT IT HUNGS AT BOOT LOGO
use the first one at the topic
Maroc-OS said:
test this One whith OverClocking/Undervolt & Some Correction of Governor.
Sorry Uploading......
Click to expand...
Click to collapse
IS it possible to pm me when you upload this ?
Maroc-OS said:
test this One whith OverClocking/Undervolt & Some Correction of Governor.
Sorry Uploading......
Click to expand...
Click to collapse
wheres the link for version 0.4
CyanogenMod
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android-based firmwares of vendors of these cell phones.
Not Working:
FM Radio
Sources
Device: - https://github.com/SaNek011/android_device_huawei_u8500
Installation
Install ClockworkMod recovery
Boot into recovery using the 3-button combo (Call+Volume Up+Power button)
Wipe (wipe data/factory reset + wipe cache partition)
Install the ROM from the SD card using ClockworkMod Recovery
DOWNLOAD ROM - UPDATE_10
DOWNLOAD CWM
CWM 5.0.2.8 by $aNek011 (Fastboot version)
CWM 5.0.2.8 by $aNek011 (Recovery version)
DOWNLOAD Google Apps
GoogleApps - http://goo-inside.me/gapps
Changes:
Update_10:
Updated CyanogenMod Sources
New Wpa_supplicant v.0.6(Allows you to connect to hidden networks wifi)
Updated Kernel (It has become even more productive)
Patched audio library, new audio filter (sound became clearer) - http://review.cyanogenmod.com/#/c/17091/
-----------------
Update_9:
Updated CyanogenMod Sources (19.06.2012)
------------------
Update_8:
Kernel([email protected] #4)
Added HTC driver vocpcm.c
ZRAM Removed
-----------------------
New boot-logo
Auto-start load_oemlogo
Recompiled opengl
Added RAMZSWAP
Update_7:
Repo sync(14.05.2012)
Added CIFS to kernel
Added TUN to kernel
Working RomManager
Updated RomManager
Updated keylayout
Updated RootExplorer
New Splash Logo Huawei + auto-script SplashLogo
Update_6:
ZRAM(Integrated to kernel)
New libaudio
New Audiofilter
Update_5:
Repo sync (19.04.2012)
Fixed Brightness
Update_4:
Repo sync (18.03.2012)
Enabled JIT
Interface usb modem rndis changed to
Replaced by a camera on the original from the android 2.3.7
Proximity Sensors tweaks
Update_3:
Repo sync(15.03.2012)
New kernel
Optimized apk files
Unlock lock screen by pressing the MENU key - Disabled
New gralloc,copybit,lights,sensors
Update_2:
Repo sync (11.04.2012)
New libaudio
New AudioFilter
Updated kernel
New keylayout and keychars
Thanks
aorth - for device tree
psyke83 - for device tree
tilal6991 - for device tree
BPaul - for helping with development
destruct0r - for assistance in the implementation of htc vocpcm driver
Good work!
Good work! Keep up!
Whats new is in the update7?
______________________________________
[Send by Tapatalk 2 from my u8500]
Posted ClockWorkMod Recovery 5.0.2.8
thanks
My father thanks you
Today should be posted Update 7 By $aNek011!
added UPDATE_7
$aNek011 said:
added UPDATE_7
Click to expand...
Click to collapse
i'll try IT!!
I hope with this update, sygic gps mobile now works....
$aNeK! have you any idea for more of free ram?
not swap
Hi $anek!!
Any idea to work WIFI, because in wifi, options advanced say:
Macadress: no avalaible....
have u activated wifi?
mine is working just fine
NAZUnlimited said:
have u activated wifi?
mine is working just fine
Click to expand...
Click to collapse
yes, but no work!!!
in advanced option say: Macadress no avalaible........
can you help me and teach me , how can you done it?
moche_bcn said:
yes, but no work!!!
in advanced option say: Macadress no avalaible........
can you help me and teach me , how can you done it?
Click to expand...
Click to collapse
The mac isnt available because wifi is disabled
I'll suppose that one of these options is the one u experience
A) u turn wifi on and after a few seconds it say error
B) u turn wifi on and it auto-disable itself even before showing wireless networks or giving any error
Either one, in most cases, result from a bad flashing or the wifi files have the wrong permission, since i dont want to make u go to a goose chase after the permissions, flash the rom again but before do a full wipe (the normal + format boot + system. They are the advanced option) and fix permissions before reboot
Sent from my U8500 using xda premium
Muito Obrigado!!!
I am spanish speaker..
I'll try it!!!
Hi !!
Now work the wifi...
One question?.....
can I change in the nvram.txt,(In the path system/etc/firmware) the
macaddr=00:90:4c:14:43:01 for my macadress of my phone??
Can I add too direct to the folder system/app the current apks from google(googlequicksearch.apk, voicesearch.apk, vending.apk,maps.apk,etc) ? before install...
doing so, Can the ROM works?.....
Funny thing, in the other rom someone asked about the mac address too
In theory, u can do that, i havent tryed that, mine reports the correct mac (some things in every rom are weird, different results for the same kind of phone)
about gapps, yes, u can flash those apps at the system folder but before doing that, check if u have enough free space in that folder. Use the root explorer, enter that folder and see how much free space is there ( it is written above the file listing) and compare with the size of those apps. The rom just needs 10mb of free space in system to boot without any problems. Download the gapps zip for gingerbread and paste them inside the app folder of that zip and flash it. This way, if u want the updated versions of those, u can place them in the zip and flash, the new ones will replace the old ones. Just remember to fix permissions before reboot.
And yes u can flash them after flashing the rom, it wont affect boot just the time it needs to start the 1st time. Will take a minute (give or take) more to boot (more apps mean more time to write the dalvik cache, but it will only do that the 1st boot)
Sent from my U8500 using xda premium
hi
respect to fastboot
What is it for? can you teach me more about ?... forgive my ignorance.....
I just know to install the ROM's and clockwordmod ...
by the way, I installed the CWM 5.5.0.4 of $anek011
Update
I have to install all updates or just the latest?
Just the lastest
______________________________________
[Send by Tapatalk 2 from my u8500]