Folks, forgive me if this subject has already been addressed. I did run a search and found nothing relevant using "navigation" as my search criteria so here goes...
I used to own a t mobile mda compact and as I recall the nav button (circle) used to flash on a circular motion to give an indication of some sort of alert be it a missed call or a text message for example. Has this feature been overlooked on the Vario IV, touchpro or is there something I need to do in order to enable this useful feature?
If I am honest my patience is beginning to wear thin with this device and its growing list of flaws/missing features which have been left to talented guys on these forums to sort out. Surely T mobile has had plenty enough time iron out these things before this phones release.. (we waited long enough for the thing after all)
My TP does this with the stock rom, no tweak or setting were needed.
Same here.
kingtendo said:
Folks, forgive me if this subject has already been addressed. I did run a search and found nothing relevant using "navigation" as my search criteria so here goes...
I used to own a t mobile mda compact and as I recall the nav button (circle) used to flash on a circular motion to give an indication of some sort of alert be it a missed call or a text message for example. Has this feature been overlooked on the Vario IV, touchpro or is there something I need to do in order to enable this useful feature?
If I am honest my patience is beginning to wear thin with this device and its growing list of flaws/missing features which have been left to talented guys on these forums to sort out. Surely T mobile has had plenty enough time iron out these things before this phones release.. (we waited long enough for the thing after all)
Click to expand...
Click to collapse
Apparently you can turn the LED on or off doe missed calls and messages and things like that according to the posts below mine.
There is no way to turn the feature when charging. So if your navigation light does not work when the phone is charging. Then i would say try a hard reset (make sure you backup) and if that does not work then you might have to send your device for warranty or exchange it whatever your options are.
On my Vario IV the settings for flashing the light (around the touch circle thingummy - I really need to read up on what it's called) were disabled by default.
So, under settings/personal/sounds & notifications, check that in the notifications tab that "flash light" is checked for e-mail, text, whatever. Actually, just checked mine after a hard reset and had to re-enable
ptyindian said:
There is no way to turn the feature on or off on the Touch Pros OR Fuze. So if your navigation light does not work when the phone is charging or if you have a text or missed call. Then i would say try a hard reset (make sure you backup) and if that does not work then you might have to send your device for warranty or exchange it whatever your options are.
Click to expand...
Click to collapse
Actually there is a way to turn on/off the feature for different events (except charging).
Try Start > Settings > Personal > Sounds & Notifications > Notifications
When you choose something like New Text Message, you see an option to "Flash light". Check the box and choose how long you want the nav light to flash.
EDIT: Never mind...forgot to post it and it's a little late.
Thanks guys for your suggestions.. I'll try some of this stuff out and get back to you as to whether any of it worked for me.
Disabled Option
I saw this thread and thought that I'd like this too. I have a stock Sprint TP Rom. I checked out my notification settings and the Flash Light option is there for everything but Incoming Call. However, it's greyed out and won't let me check it. Is there a reason this would be disabled?
Kevin
Hello!
chewie8han said:
I saw this thread and thought that I'd like this too. I have a stock Sprint TP Rom. I checked out my notification settings and the Flash Light option is there for everything but Incoming Call. However, it's greyed out and won't let me check it. Is there a reason this would be disabled?
Kevin
Click to expand...
Click to collapse
It probably becouse on incoming call the whole divice is waked up and the send key is blinking.
There is also settings>sounds and notifications>notifications "phone:missed calls". There you can set an action: popup, blinking and vibration.
hope this helps (names of the options translated from polish TP stock ROM so mey not be acurate )
BHole
Thanks folks..!!
Seems like I totally missed those options for the flashlight alerts. They all work for me now. I have combined them with various ringtones to differentiate the alerts i'm getting. It appears the flashlight indicates alerts even when the device is being charged. Thanks again guys, at least "SOMETHING" now works as expected.
I am sharing some profiles and projects which are very useful for me. The background is that I have installed tasker to minimize the apps for little things. I am not posting night profiles or profiles turning wifi off etc., so I think this thread will not be boring.
Here they are:
Project New Messages:
It has following profiles/tasks:
Show custom notification of new text
Open a Jellybean-like message reply popup upon clicking notification
If we decide to view message via default notification, clear the tasker's generated notification
Light up screen on receiving new text, if screen is locked.
The sceenshots are also attached for this project.
PROFILES:
Find phone, a "productive" GPS Locator solution.
When we send a text "findphone" to our number, following tasks are performed:
Set Wifi to off
Airplane mode on
GPS on
Get location via GPS (timeout 4 minutes)
Wait 4 minutes IF GPS location is not set yet
Airplane mode off
Wait 15 seconds (the time it takes for the network to be useable)
Send SMS to the number from which the findphone text had been sent (last incoming text number) (text will be: GPS [email protected] 00.000000, 00.00000)
Wait 15 seconds (to ensure the text has been sent)
Wifi on
Get Location via network (timeout 4 minutes)
Wait 4 minutes IF Network location is not set yet
Send sms again, now with the text like: Non-GPS [email protected] 00.000000, 00.00000
This turns wifi and mobile network off and turns gps on so the phone collects exact location data via satellites. after that, it turns the networks on and sends the exact gps location text. Then it also collects and sends the approximate gps data with the help of network, so the receiver will receive two texts. The format in which the texts are sent is made in such a way that if we copy the whole text of message and search in google maps's app, it will pinpoint to the exact location and not the nearest road.
Instant Missed Call Notify
Send text "Missed call from" followed by the number we had a missed call from, to a predefined number. (ignore the word instant)
Instant SMS forwarding
Forward all texts to a predefined number with text like "From [Name][Number]: [Text]
Send Email To Faraz
When composing an email, if we long press the search button, it will type in a part of email address, then press down then enter, hence selecting the first contact from the dropdown menu. Then it presses the down button like 4 times, then left then enter button (ALL ARE D-PAD FUNCTIONS), So, the send button is pressed. This is useful for facebook page admins and those who want to share every other picture via email to a contact.
And... Faraz is the name of page
About the image of browser, this is just a screenshot I wanted to share, just to send out a message that even a simple web browser-like "application" can also be made within two days of using tasker, so tasker is not too difficult and that the new users should give it a try
How come you make the screen go ON in #1
AnkitChanne said:
How come you make the screen go ON in #1
Click to expand...
Click to collapse
I did it with Secure settings plugin
Thank's man! I wish there was a specific thread for tasker where we could share profiles / scripts for tasker. It's a really underrated powerful tool that requires a bit of a learning curve, but once we get on with it, the possibilities are literally endless!
MidnightDevil said:
Thank's man! I wish there was a specific thread for tasker where we could share profiles / scripts for tasker. It's a really underrated powerful tool that requires a bit of a learning curve, but once we get on with it, the possibilities are literally endless!
Click to expand...
Click to collapse
Yes, there are many useful implementations, but I haven't found posts other than those who teach about turning wifi off in car or turning volume down at night.
I will hopefully post another, better than this, implementation soon. It's about adding widget-like functionality on the lockscreen of HTC.
See this preview, I am still building it.
The text at the bottom is email's subjects followed by the sender's names. Text looks broken here because this image was uploaded in intention of getting help with this exact matter.
usman farhat said:
Yes, there are many useful implementations, but I haven't found posts other than those who teach about turning wifi off in car or turning volume down at night.
I will hopefully post another, better than this, implementation soon. It's about adding widget-like functionality on the lockscreen of HTC.
See this preview, I am still building it.
The text at the bottom is email's subjects followed by the sender's names. Text looks broken here because this image was uploaded in intention of getting help with this exact matter.
Click to expand...
Click to collapse
There are some tutorials here on xda onder Android category. A brief search came up with extended results in how to use tasker. Some of them are quite good.
But yes, I agree that the app itself should have an official tutorial for the basic / medium stuff, the rest we would exploit and figure out on our own
Sports activity tracker
* ALPHA * state.
I'm looking forward for people to test and send suggestions.
Track your sports activities capturing
location
cadence
altitude
power
heart rate
speed
bearing
slope
etc...
Plot progress, lap time and other
Set targets and receive feedback while tracking your session
Works in landscape and portrait
Audio rithmic control.
Reproduce your music at modified tempo to match your cadence.
Enable metronome to help with cadence.
Download or import routes.
Routes export to GPX and KML
Google earth route export *Broken*
Check compass and GPS status
Integration of sensors and wearables
Heart rate and other BTLE sensors.
Miband
Ready to integrate more
Google fit integration
https://play.google.com/store/apps/details?id=com.tincore.and.gliderun
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT NOTES
The app will only discover wearables like MiBand if they are not used at the same time by another app like MiFit. You need to close MiFit for the band to be discovered.
In the case of the MiBand when you change the app your band stored data will be wiped. I'm investigating a way to avoid this.
What does it do..?
First message updated a bit
How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space
giorgis91 said:
How to connect with mi band? I search for devices but it find nothing
Edit: just figured it out
I have a question. After connected to my miband I tapped on the top left settings icon and I saw in the bottom of the list the option "factory reset". Is it really possible? What are the consequences? In the official app this option doesn't exist
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.
tincore said:
To connect the MiBand you unpaired it first from the other app havent you?
The Admin section of wearables exposes all kind of operations. Some of them are rather low level and even should be executed on a particular order. I may hide/show all that under a setting to avoid mistakes.
Factory reset just does that. It will wipe all the pairing data.
Click to expand...
Click to collapse
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space
giorgis91 said:
Thank you for answering quickly I ask that because lot of people on an Italian forum that I know had many problems with this wereable and I thought that a factory reset could solve them.
Another question: after using you're app I noticed that after reconnecting the mi band to its official app all the data was lost. Is it normal?
Sent with my Nexus 5 through time and space
Click to expand...
Click to collapse
About the data wipe. This is normal the app is setting new user data based on the personal profile.
Same with the alarms. The band, as far as I know, does not have a way to retrieve the current alarm configuration.
Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.
saltinbas said:
Thanks for the app. I think it very promising. I just installed the app from google play, unpaired the band with mi fit app and connected with gliderun. After connection, it stays short time as connected and disconnects after 4-5 seconds. Is there a reason you can tell? I use smartlock app and I am on cm11.
Thanks again.
Click to expand...
Click to collapse
Sorry for not answering before. Is it working better now. There have been a good number of versions.
Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!
Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
You have,at least, two steps counters the band and your phone. Each of them has an absolute step count.
"Sensor step counts" indicator shows the steps of the active step counter so depending on the band being connected or not it may toggle to your phone. I hope this makes sense.
I will add a "Blank" indicator asap.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
I'm trying now to fix a few issues to move to beta. I hope I can make a video and some captures soon.
adobrakic said:
Hey, tincore. Thank you for making the app compatible with the Mi Band! Since there's a lack of feedback here for you, I'd like to leave you some general issues/thoughts/etc. If you'd like to inquire about any of my comments, or would like logs of anything, please let me know and I'll provide that. If you wouldn't mind just quoting some of my comment so I can get an e-mail notification of your reply, that'd be great!
I'm on Android 4.4.4.
- Initially, I had trouble pairing the Mi Band with the app. I unpaired my band from MiFit, killed MiFit, and attempted pairing to Gliderun. Initially, Gliderun would connect to the band, this is where band's lights light up, and you have to tap the band to 'accept' the pairing; but when you tapped the band nothing happened. However, a minute later the band connected to Gliderun as if I tapped it.
- When I connected to Gliderun, it recognized that I had 6,000 steps, but once I began walking, the app started counting from 0.
- I'm kind of confused about the 'start' function on the Activity tab. Am I supposed to have this enabled? Normally, I just go into MiFit, refresh the page for it to download the data from the band. Can I essentially do this with Gliderun without using this start function?
- On the Activity tab, is there a way to make 'empty' cells completely blank?
- Is there a way to track sleep?
Previously, I had trouble getting my MiBand to reliably stay connected with Gliderun, but now it seems to keep the connection fine. I'll start using this app daily instead and I'll check back here with any updates. Thanks again!
Click to expand...
Click to collapse
tincore said:
Thanks for the remarks!
After the band is paired once the app tries to find and reconnect to it automatically. I imagine that first time there was a problem with the connection so it connected on the retry . It *should* also syncronize itself every 1-2 hours..
Click to expand...
Click to collapse
Yup! After wanting to view my current steps for today, I just opened up Gliderun, waited a bit, and it connected to my MiBand after a couple of minutes. I have to close Gliderun in the meantime because my phone is relatively old (HTC One S -- 2, 3 years?) so I can't have the app running all the time.
About step count and the start button. Gliderun tries to combine activity and general tracking. When you start a particular activity (by clicking on start) it should count the steps of that activity. When you are not in a activity it should count those steps globally for a daily total.
Click to expand...
Click to collapse
Ohh, I see, that makes a lot of sense! I'm a student for the majority of my day and don't really have any separate 'activities', so I didn't see the inherent benefit of activity mode, but that does make sense.
To activate global tracking you can go to preferences > tracking or tap on some of the inactive dashboard indicators. Without global tracking activated you should still see some totals after syncronization with the band.
Click to expand...
Click to collapse
Ahh, I apologize about that, I completely neglected this tab. I figured the Activity tab was more important simply because of its location. This actually looks more like how I was hoping the app would function.
About sleep. The app should be already tracking your sleep periods. You can see those on Global stats screen. I would like to add the deep sleep phases but I need documentation or advise on what exactly I have to look for in order to provide a faithful solution.
Click to expand...
Click to collapse
Thank you! Again, if there are any logs I can provide that would help, please let me know and I will certainly do so.
--edit--
I'm having an issue where the app doesn't seem to be updating the Global Stats tab. On the Activity tab, my total steps have been counted properly, but when I go to Global Stats, it only shows information from the previous time I synced (about 8 hours ago). I killed the app, re-connected, and re-synced, and the same thing happened.
--edit #2--
After messing around with the Global Stats tab, and switching views (24 hours/day/week), the app resynced on its own (not sure if it was a coincidence or from me switching views), and now the Global Stats tab has updated; but now it has slightly more steps than the Activity tab.
Not a big deal at all, but I figured you'd like to know!
I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks
maishsk said:
I just found your app. It looks very promising.
Where would you prefer to have me send the feedback.
I understood there was also a Reddit thread somewhere - I could not find it.
Thanks
Click to expand...
Click to collapse
If you want you can send me an email. If it something more general or open to discussion by other people feel free to post it here.
That Reddit thread is not getting any rythm.
I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.
Thanks for all that feedback! I add everything to my list. Will tackle the more important stuff first.
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
I will increase the daily goals to something in the ultramarathon range.
About imperial input. You are absolutely right. Will change it soon..
I will see what I can do with the compass. It is all a matter of priorities.
Altitude comes from GPS.
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Devo7v said:
I had a Mi Band and used the MiFit app for the last couple months, but I lost the device. I've ordered a new one and I'm going to start using Gliderun mostly because of the Google Fit integration. While I'm waiting for my package I've been messing around with your app and trying to figure some things out so I'll be ready to go when my new band arrives. Here's some feedback:
The headphone icon opens up the music controls and the audio notifications; music controls/library only works with music stored on the phone, is there any way to integrate this with Google Music? There's only a couple of apps that I've seen do this (specifically GMusicFS), but it would be nice.
On the user screen: for any user input requiring a number (weight, height, goals, etc.) you have a scrolling number which is nice from a UI perspective, but when I have to enter any of these values for the first time, scrolling is very tedious. This is particularly brutal when I'm trying to set up a goal for the first time, I have to scroll all the way from 0 to 8,000. There should be a way to manually input a number using an on-screen keyboard as well. It also looks like the goal is limited to 20,000 steps, theoretically this should be unlimited.
User profile: I have my units set to imperial. When inputting my height for the major intervals you might want to make the height max out at 7-ft just in case. For the minor intervals, you should put the unit next to the number (inches) and I would limit the user to discrete numbers 1 through 12. I'm not sure how you're calculating height, but the way you have it set up it is very hard for a user to input their height in imperial units. For example: I am 6-ft 2-inches, in order to input my height I have to calculate how many hundredths of a foot 2-inches is. So in my case 2/12=.16666. The average person isn't going to do this and is going to give up when you can't just enter 6-ft 2-inches.
The compass UI needs a little work, it isn't quickly evident where north is. I would prefer a more traditional looking compass (maybe something similar to this). Also, for some reason my altitude is always blank.
Synchronize: I have the first three options enabled for Google Fit integration. The app always says disconnected, when I press the synchronize button it changes to connected, but I don't think anything is actually being synced. There should be some sort of progress bar when synchronizing with Google Fit so the user knows it's actually working. In my case I don't think it's working at all. I've enabled the option to download tracked activities from GFit, but nothing ever shows up in the stats.
In the settings, General: I would make an expert section to the settings menu that has to be manually activated and move Optimize track points and Recalculate calories there. Also for any option where you could be deleting or modifying data (everything under the "Other" section) I would have a confirmation dialog box pop up. That way if somebody accidentally presses one of those options they don't completely wipe out all there data.
In the settings, Audio: I would either explain the difference between Audio engine A and B or give the user an option to play example audio. Similar to how you have the option to "Listen to an example" of text-to-speech output in the main android settings.
In the settings, Notification: I think there needs to be a little more configuration for notifications. I really like the way the Notification version of the MiFit app allowed you to set the colors for the LEDs on the Mi Band as well as the number of times it vibrated and the number of times the LED blinked. I know this is a beta version, but I think a little more work needs to be done in this particular area if you want users to switch from the MiFit app. Being able to tell what app I'm getting a notification from just by looking at the band is extremely useful and it's going to make switching hard without it. I don't want to say you should copy the Notification settings screen from the MiFit app, but it has been implemented very well.
Settings: somewhere you need to provide Help information. For most of the options I'm not sure exactly what they're supposed to do, maybe have a ?-button next to the option that the user can press that will pop up a longer description of exactly what the option does.
Any thoughts on providing a dark theme as well? Just something simple where you change the background to black and the text to white, the green color should look good with both a dark and light background.
I saw you have sleep tracking on the list of things to improve upon, really looking forward to that. The MiFit app and Sleep as Android app provide a very clean UI for visualizing your sleep. I would try to implement something similar. I'm sure you've seen it, but this thread might have some hints on how to better pull the sleep data from the MiBand.
I know I wrote a lot, but you have done great work with this app in the short amount of time you've been developing it. I can't wait to see how this app progresses because I think you've got a really good app here. The design looks very good and polished it just needs a few tweaks here and there. Once I get my new Mi Band I'll provide some more feedback.
Keep up the great work. If you want to discuss any of this more I would be more than happy to do so.
Click to expand...
Click to collapse
Thanks for reading through my comments:
tincore said:
About audio.
I may eventually add a fallback into system players. The player provides a rythm guidance for your exercise by adjusting the playback rate to your desired cadence so it is rather specific. it is custom built.
Click to expand...
Click to collapse
The current implementation is good, it was more of a wish list item.
tincore said:
About scrolling. If you tap you do not need to scroll. You can enter the number directly. This is NumberPicker standard. I may have missed one or two fields though.
Click to expand...
Click to collapse
You're right I don't know how I missed that, apparently I've been using Android wrong this whole time.
tincore said:
I will increase the daily goals to something in the ultramarathon range.
Click to expand...
Click to collapse
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
tincore said:
About imperial input. You are absolutely right. Will change it soon..
Click to expand...
Click to collapse
Thanks
tincore said:
I will see what I can do with the compass. It is all a matter of priorities.
Click to expand...
Click to collapse
I don't see this as a priority, it was just a suggestion. Feel free to put this at the bottom of your list.
tincore said:
Altitude comes from GPS.
Click to expand...
Click to collapse
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
tincore said:
GFit issue is a glitch too. Click sync again. I'm now focusing more on FitnessSyncer as it is much more powerful.
Click to expand...
Click to collapse
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
tincore said:
Sleep tracking is working. You can see it on Daily Stats. It may need some tweaking though. The band does not really export sleep data so I had to write the algorithms myself and I've already noticed a couple of issues.
Click to expand...
Click to collapse
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
tincore said:
Also the custom notifications is a great idea. I have to fit that into a general API. The app is meant to integrate other bands. Just need to get some samples.
Click to expand...
Click to collapse
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to decompile the Notification version of the MiFit app or see if the api calls on this website are useful.
The more we talk and the more I mess around with the app the more I'm liking it.
Thanks again for all the valuable input!
Devo7v said:
Thanks for reading through my comments:
Click to expand...
Click to collapse
You are not the first one having trouble with the NumberPickers. I think they are not very well designed. I do not find the field edition intuitive either. Most of the time I forget to click accept so I lose the edition. Maybe I'm doing something wrong.
Devo7v said:
I honestly would remove scrolling completely from the goals and just leave it as user input. I don't know if scrolling is very useful when we're talking about differences in thousands of steps.
Click to expand...
Click to collapse
Yes. The plan is at least to space them in 100 or 250 units
Devo7v said:
Apparently I was just in a bad location at the time. However it is reporting a different altitude than GPS Test. Gliderun shows me at an altitude of 119ft whereas GPS Test shows me at an altitude of 233 ft so I'm not sure what is going on. Is there some sort of log I can provide?
Click to expand...
Click to collapse
At the moment I'm just showing the Altitude reported by GPS and I think that it has to be corrected by a complex calculation that can be retrieved from a webservice. That may be the issue.
Devo7v said:
I don't personally use FitnessSyncer, but I'm sure there are a lot of people who do. Looking forward to GFit integration. One quick question: once GFit is fully integrated, will I be able to sync all the data I collect with Gliderun or is there a limit on how far back I can go? Likewise will I be able to import all of my past GFit data into Gliderun?
Click to expand...
Click to collapse
Last time I tried it I could upload and download all gliderun data. I found GFit rather odd. Up to now it is unclear to me when it really uploads the data to the servers making it is visible from the web or other device. Also you do not retrieve exactly what you save.
Devo7v said:
As I mentioned, I don't have my new Mi Band yet so I can't test sleep tracking yet. When I get it, I'll give you some more detailed thoughts on it.
Click to expand...
Click to collapse
Sleep periods seem rather accurate. Still I have to do something to detect short sleep interruptions. Phases analysis is there too although I think that it has to be taken with a pich of salt. (Not only in this app)
Devo7v said:
The detailed control over notifications is the one thing I'm going to miss the most from the MiFit app. Hopefully it's not too much trouble to add these controls. The only thing I can think of to figure out how to add these controls would be to
Click to expand...
Click to collapse
It is no real trouble. I will add that rather soon (I hope)..
Hey Tincore
I think you have done some really great work on the app .. but when I tried to use it yesterday I got a bit confused (maybe you can help me out here).
I couldn't actually see where my step count was being shown. I was assuming it would be on the activity screen but it just didn't seem to update. Is there a way to force a refresh of the count? The only time the app seemed to update was when I reconnected my miband.
The update to fitnesssyncer worked well .. is there anyway to have it automatically sync (either time period or when you open the app possibly)?
I found a spelling mistake as well Where you add your weight and waist, chest, hip sizes there is a "thight" measurement (im guessing its meant to be thigh).
Thanks for your hard work!
Hello, has anyone had problems with the watch notifications?
The problem I have is that the notifications do not appear on the clock screen, nor do they vibrate, nor do they sound; only until I swipe from bottom to top I see that there are notifications.
I already spoke to Huawei support and they ask me to activate special notification permissions that I cannot find in the settings.
I hope someone can help me.
Have you already attempted to enable any available permissions from the app details under Apps in Settings?
Hello, thank you very much for answering.
I have already managed to get the notifications to work for a few hours, but after a few hours the same thing happens again. I have activated all accesses of the Health application, such as access to notifications (In the menu "special access to apps"), permissions to contacts, phone, etc. The Health app is also out of battery optimization.
Huawei's support asks me to activate this:
Settings> Privacy> Management> Special app permissions> Notifications> Huawei Health.
I hope I have explained myself well.
If it consistently seems to work until the phone is idle for a couple hours, you should check all of the different settings for battery and background data throughout the phone and see if one of them is to blame. There are quite a few different settings for this, including some also in Developer Options if you enabled those.
Hi.
When it worked for a while and then no longer, it was the first thing I thought. Something is killing some service or task and that's why they stop coming. But it is nothing like that, the notifications do reach the clock, but it does not vibrate or sound. I already put the application without battery optimization, which starts automatically, blocked in tasks, application services the same. I can not think of anything else.
Thanks for the help.
After doing more research, I came to a huawei forum in Chinese and found the answer. The watch can detect that it is not being used, that you are not wearing it and tattoos can make the watch think that it is not being used. I have my entire left arm tattooed, change the wristwatch and it works perfectly. But I don't know how this leaves me a little unsatisfied, I don't know.
It doesn't have a way to disable that? Might want to suggest it to them. Usually features like that aren't hardcoded because such situations exist.
No, the GT2 series has a sensor dedicated specifically to that. I can only return it, change the hand to the one that is not tattooed or erase the tattoo.