Related
I have an inspire running coredroid v8.1 and I cannot get a gps lock at all, even if I let it sit outside for 10 minutes...
I have reflashed the rom several times, and even tried the newest versions of virtuosity and cm
I have followed the video to pull the phone apart and I'm positive the gold pins are making connection
I have tried angel death's patch
I have ran gps status and cleared and re-downloaded in a-gps settings, ran gps test, and ran faster fix
I have tried the trick where you pull the sim out and get a lock (I still get no lock even with no sim)
I've looked everywhere and tried to do all the research before posting a new thread, but I just can't find anything else and I don't know what my problem is...
any insight would be greatly appreciated
EDIT: Also thought I should include that I have flashed radios 12.41.60.19_26.06.04.14_M, 12.54.60.25_26.09.04.11_M2, and 12.62.60.27_26.13.04.19_M with none making a difference
Sorry to tell you but you might just have a bad thing piece of harware. I started a thread a little while ago called "GPS Last Resort". I tried everything... And I mean Everything! I was told that there were "known" hardware issues with the Inspire. So I un-rooted and returned to a "stock" state and went through the PITA process of getting a replacement.
Once I got my replacement, it was a night and day difference. My new one locks in less than 15 seconds with 5-4 meters accuracy.
Don't drive yourself crazy. If it is still under warranty, get it replaced.
Sent from my Inspire 4G using xda premium
did your phone have any other signs of being defective or was it just the gps? I mean, the phone is great except for this! No boot loops, force closes, glitches, or anything...
Also, if it's just the antenna, could I buy an inspire with like a broke screen or something off ebay and just switch them out? Do you think that's a viable option?
Sorry it took so long to get back to you on this...
You may not even need to replace the antenna at all. When you pop off the cover for the LED camera flash (this is also your gps antenna) there are two little spring like clips that are the contacts for the antenna. If those contacts are not making a good connection - your phone will just keep searching for signal. If you are brave enough - you can pop out the antenna and carefully bend out those contact clips in order to make a better connection.
I was hesitant to do this myself - and sense the phone was still under warranty, I got a replacement.
Sorry again for the delay - hope that helps if you have not already found an answer.
dschreiber69 said:
Sorry it took so long to get back to you on this...
You may not even need to replace the antenna at all. When you pop off the cover for the LED camera flash (this is also your gps antenna) there are two little spring like clips that are the contacts for the antenna. If those contacts are not making a good connection - your phone will just keep searching for signal. If you are brave enough - you can pop out the antenna and carefully bend out those contact clips in order to make a better connection.
I was hesitant to do this myself - and sense the phone was still under warranty, I got a replacement.
Sorry again for the delay - hope that helps if you have not already found an answer.
Click to expand...
Click to collapse
Yea be careful with this. I decided I'd go ahead and pop off the camera cover to readjust my gps antennae contacts and ended up breaking the cover. ~2cm crack just under the flash, which raises up the cover enough that the contacts won't make contact at all unless I'm applying pressure that only Thor could exert on the cover.
side note - 2 weeks after I did this my screen shattered.
Haven't been having much luck lately..
homeslice976 said:
Yea be careful with this. I decided I'd go ahead and pop off the camera cover to readjust my gps antennae contacts and ended up breaking the cover. ~2cm crack just under the flash, which raises up the cover enough that the contacts won't make contact at all unless I'm applying pressure that only Thor could exert on the cover.
side note - 2 weeks after I did this my screen shattered.
Haven't been having much luck lately..
Click to expand...
Click to collapse
Ouch!
That is pretty much why I decided to go for doing the warranty replacement
I did the warranty after trying to remove the gps antenna because it still didnt work after i did that. The sent it back working !!!
Hi,
After a water damage I opened my Nexus S [GT-i9020T] and cleaned everything with eletric contact cleaner. Everything is working fine, except for no signal, but the operator name (from SIM) appears in the screen.
I tried with Gingerbread and now with Crossbone 0.2.5, wifi works perfectly.
I cleaned the antenna gold points too, anybody can help to find where could be the problem or sugest replacement parts and where to find?
Thanks a lot,
ticofortes
Sounds like your radio might of gotten damaged also. Try to find stock Odin images for your device and try re-flashing it.
ticofortes said:
Hi,
After a water damage I opened my Nexus S [GT-i9020T] and cleaned everything with eletric contact cleaner. Everything is working fine, except for no signal, but the operator name (from SIM) appears in the screen.
I tried with Gingerbread and now with Crossbone 0.2.5, wifi works perfectly.
I cleaned the antenna gold points too, anybody can help to find where could be the problem or sugest replacement parts and where to find?
Thanks a lot,
ticofortes
Click to expand...
Click to collapse
You know those gold pins are nfc right? Radio is down the right side of phone under case(looking at the screen)
Sent from my ice cream powered Nexus S
mabry, I tried stock image (android.clients.google.com/packages/ota/google_crespo/1ada25375426.signed-soju-ota-189904.1ada2537.zip) and radio still not working.
DarkhShadow, please take a look at the attached image there are some contact points what i think is for radio antena, can you confirm that?
So I think my radio is damage, please where is it located? Where can I buy replacement parts or any alternative method to repair it?
Thanks all!
http://www.ifixit.com/Teardown/Nexus-S-Teardown/4365/1
Looks like you got you picture from the above link, I would take apart to the point I am confident I can put it back together and use warm air blowing over it to dry it out over a day or so.
Contact cleaner may get most of the water out but not all of it. that is what I would do if I was in your position, before buying new parts for it.
Yes Gazoo222, I used this site.
I will try this drying procedure and come back in two days.
Thanks!
Just in case if it don't work, do you think the problem is in SIM card board?
(h t t p : / / guide-images.ifixit.net/igi/fDHYCvcIUepftlOQ.medium)
Or the antenna can be damaged with water too?
Is there any way to diagnose it better?
Thanks all!
ticofortes said:
mabry, I tried stock image (android.clients.google.com/packages/ota/google_crespo/1ada25375426.signed-soju-ota-189904.1ada2537.zip) and radio still not working.
DarkhShadow, please take a look at the attached image there are some contact points what i think is for radio antena, can you confirm that?
So I think my radio is damage, please where is it located? Where can I buy replacement parts or any alternative method to repair it?
Thanks all!
Click to expand...
Click to collapse
they could be, but I think the radio is on the other side because if I cover it with my hand my wifi and phone signal drop a fair bit
You could try asking Adam outlet, ik he's probably poked around Nexus S hardware a fair bit
Sent from my ice cream powered Nexus S
The antenna uses current and has very little resistance, so yes if it shorts out it could cause damage
Didn't work guys, I'll buy the sim board (link bellow) and replace it, what do you think? Tks!
h t t p : / / w w w .globaldirectparts.com/Nexus-S-GT-I9020T-SIM-Card-Tray-p/smsng6098700.htm
ticofortes said:
Didn't work guys, I'll buy the sim board (link bellow) and replace it, what do you think? Tks!
h t t p : / / w w w .globaldirectparts.com/Nexus-S-GT-I9020T-SIM-Card-Tray-p/smsng6098700.htm
Click to expand...
Click to collapse
After a lot of months waiting I found this and replace it without sucess the phone still identify the sim card but no signal.
I don't have more ideas... Is it possible the antenna is in short?
Tks!
Anybody else's gps connectivity generally crap? Seems to take for ever to connect then struggles to keep a connection.
Any known software conflicts? Running stock 2.35 rom.
No trees, walls, flying saucers in the way and Tried various gps info and fixer appear but to no avail.
Starting to really p*ss me off now.
Ta!
Sent from my HTC Desire S using XDA App
Yes, happens to me too. expecially when i go for walks. It takes reaally long time to load. Use Gpsfix ( Google it, Not able to post link because of post count) . It makes to process a lot faster.
khamoshpathak said:
Yes, happens to me too. expecially when i go for walks. It takes reaally long time to load. Use Gpsfix ( Google it, Not able to post link because of post count) . It makes to process a lot faster.
Click to expand...
Click to collapse
Be warned that gpsfix adds air push adverts to your phone. You may want to also instal add-on detector to find and remove them.
OP: Are you using a case? You may find that without root, you can't change the agps server location (mine was set to Asia by default) so it takes a while to lock pulling satellite info via 3g from the other side of the planet!
GPS Status and toolbox (which doesn't need root) forces an AGPS data download on startup and might help. Make sure 3g is on.
https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2
Sent from my HTC Desire S using xda premium
Have observed that the GPS fix times are ROM dependent during my journey through many many excellent ROM's available for Desire S. I have even tried the AGPS fix which is recommended in the Dev section which was indeed helping to get a faster fix but the fix wasnt stable afterwards, especially while using apps like endomondo sports tracker..
The first ROM I saw that the GPS was excellent was in MIUI (GB) - without any AGPS or any other market apps or hacks I began to see a fix within 20 secs. Now, I'm presently on Reaper 2.2 (without AGPS fix) and the GPS continues to be excellent (<20 sec fixes).
I'm using ice cold sandwich with GPS+agps fix and find satellites in 3 seconds
Sent by my fingers to your head.
GPS fix issues can be as simple and HW-related as bad contact between the phone cover that includes GPS antenna (I guess it's the lower cover, but it might be an upper cover too), and the golden connector pin on the board. If you test all possible SW workarounds and they don't help - try to locate the antenna and make sure the connection is firm. Look for Vibrant GPS problems, they had such problem in the early batches.
For me the thread AGPS Patch Desire S 3.1 & 2.2 | GET BACK TO RAPID GPS LOCK, CAN LOCK ONTO MORE SATS helped a lot to get rapid GPS lock. Though, I'm not sure if root is needed for all installation methods. Good luck!
P.S.: The described patch is allready included in some custom roms like Endymion.
Jack_R1 said:
GPS fix issues can be as simple and HW-related as bad contact between the phone cover that includes GPS antenna (I guess it's the lower cover, but it might be an upper cover too), and the golden connector pin on the board. If you test all possible SW workarounds and they don't help - try to locate the antenna and make sure the connection is firm. Look for Vibrant GPS problems, they had such problem in the early batches.
Click to expand...
Click to collapse
The GPS and WiFi antennas are in the upper (camera lens) plastic cover, and, yes they use sprung pins to (hopefully) make connection. The phone antennas are in the lower (battery) cover.
I have found that many types of case massively deteriorate GPS reception of my phone. What puzzles me is why some users seem to be entirely unaffected; it's almost as if individual phones vary; even as an experienced engineer I cannot expalin it.
Since cases create mechanical pressure on the phone body and the contacts are very sensitive to their cover bending (they usually have a very light touch), it might be one of the reasons for reception deterioration. Sometimes even a hit of a falling phone can either destroy reception or improve it - saw it happening live on friend's Desire HD, it was very funny to see how the GPS that wouldn't lock properly for weeks, after the phone fell, started locking in 5 sec all of a sudden. Pure plastic cases shouldn't matter for reception otherwise, or at least I can't think of how can they possibly interfere.
By the way, Desire S' GPS is a bit on a weaker side - I compared it side-by-side to my MT4G, and it's always several lock seconds and a couple of locked satellites below. It should be plenty powerful for a good fast lock, though, and that's why I suspect disturbance on the HW side, rather than SW misconfiguration.
now that you guys are talking about cases, I was using a case mate barely there case before... long time ago gps fix was on the slow side (around a min).. but somewhere down the line of moving across ROM's I moved to MIUI GB (with the case still present) and the fix improved (without any AGPS patches or GPS fix apps).. now I dont use the case and have moved to Reaper CM7 based ROM and the GPS fixes are brilliant... looking at the build of Desire S I dont think that the contacts for GPS, wifi or phone antennas are at fault or can change with just a fall.. I can't pin the problem but I definitely feel removing the case has helped the gps fixes.
Jack_R1 said:
GPS fix issues can be as simple and HW-related as bad contact between the phone cover that includes GPS antenna (I guess it's the lower cover, but it might be an upper cover too), and the golden connector pin on the board. If you test all possible SW workarounds and they don't help - try to locate the antenna and make sure the connection is firm. Look for Vibrant GPS problems, they had such problem in the early batches.
Click to expand...
Click to collapse
Seems legit. By so far I am experiencing also constant GPS problem. It really might be the problem. I will make a try and let here know how it goes.
Forwox said:
Seems legit. By so far I am experiencing also constant GPS problem. It really might be the problem. I will make a try and let here know how it goes.
Click to expand...
Click to collapse
Clining contact did not help..
adding some wires to the antena (made some improvement)..
Than i orderd "new antena" for 8 eur form "Taiwan".
no may fix quick and with 12-18m an i does not lose fix anymore..
(and now i have working gps.. after 1 year of trying roms and waiting for better radio firmwares)
---------- Post added at 08:11 PM ---------- Previous post was at 07:38 PM ----------
fasty said:
What puzzles me is why some users seem to be entirely unaffected; it's almost as if individual phones vary; even as an experienced engineer I cannot expalin it.
Click to expand...
Click to collapse
You have first version of gps antenna which has been silently improved..
I bougt new antena (upper cover) and wifi antena is printed the sesame number, but gps antena has an number increased by 10. (which by my means, mean new version)
And with "new antena" i have reliably working gps now.
(htc service (here in SLO) wanted th have the phone one service for 14 day-s thats teh reason i didnt apply for warranty repair)
on stock rom gps is really slow..i have that experience before,actually one of the reason i rooted mine...now,got gps locked in less than 15 minutes...(my gps always turn off,on when want to use navigation only)
oTeMpLo said:
Clining contact did not help..
adding some wires to the antena (made some improvement)..
Than i orderd "new antena" for 8 eur form "Taiwan".
no may fix quick and with 12-18m an i does not lose fix anymore..
(and now i have working gps.. after 1 year of trying roms and waiting for better radio firmwares)
Click to expand...
Click to collapse
That's awesome! Could you please share a link to that item, please? I am really interested in that. I am still fighting with GPS. Sometimes it works, sometimes it don't...
Hi everyone pretty new to the Chinese phones and apologies if this has been done before (i cant find it) but i have a JIAYU G4 youth which is running the latest custom rom off needrom.com (JY-G4 Yabe V7.0.2) this is the 3rd rom i have flashed and each one the GPS is very slow or does not work at all and you can not get a fix. The only way i can get it to pick up satalites is to use the engineer mode on mobille uncle tools which is quite long winded.
Ok so to my question "can the gps be improved by some sort of configuration?" I notice in the root of the sd card is a gps config file does this need altering somehow when used in UK?. Any help would be much appreciated as other than this it is a great phone.
The problem is rather the antenna in the back of the device when the device screen up and metallic body, the blocked antenna. GPS works well when the device display down.
But there are some guides on how to improve GPS software (according to me do not work):
http://gizbeat.com/2159/gizbeat-101-gps-not-working-on-mtk6589-mtk6577-mtk6575/
http://www.youtube.com/watch?v=ZnY_425NgB0
This is more than only a hardware (antenna) problem. I've noticed that when I connect an external BT mouse that the mouse itselfs gets a "spot on" fix, but the phone is struggling to keep this fix.
By editing the build.prop and disable JIT the phone has a much better GPS fix.
GPS fix issue in Jiayu G4
Finally the issue is solved by 100%
The problem is rather the antenna in the back of the device .
The PCB has contacts for GPS antenna , the 1st & 3rd are the ground & the middle i.e 2nd is the main antenna.
I just skipped 1 & 3 contact by putting insulating tape between contact & the antenna.
Only 2nd point is touching the antenna .
just that's all.
Now my phone fixes GPS with in a minute in cold start.
I tried with most of the available ROM.
Pls note : If you are not a technical person do not open.
refer to some mobile repair person .
soon release the photos of the same.
Re:Finally the issue is solved by 100%
pankaj459 said:
Finally the issue is solved by 100%
The problem is rather the antenna in the back of the device .
The PCB has contacts for GPS antenna , the 1st & 3rd are the ground & the middle i.e 2nd is the main antenna.
I just skipped 1 & 3 contact by putting insulating tape between contact & the antenna.
Only 2nd point is touching the antenna .
just that's all.
Now my phone fixes GPS with in a minute in cold start.
I tried with most of the available ROM.
Pls note : If you are not a technical person do not open.
refer to some mobile repair person .
soon release the photos of the same.
Click to expand...
Click to collapse
Hi Pankaj459,
I tried the software fixes, which got me a quicker fix. Unfortunately the fix is not very accurate.
Very often the GPS loses its way and I find myself about 100yards beside the road or in a nearby street.
I opened up my G4A and noticed that the 3rd pole had already been isolated with black tape. I did also isolate the left pole. Nevertheless, did not see any difference.
The fix took just as long/ short. Accuracy was just as dismal.
Is there anything else I can do? Would it actually help if I modded some copper wire to the GPS contacts, or would that not solve the issue?
Thanks in advance for your help.
Litening
for those who can speak german (like me) here's a link to my gps antenna project
h ttp://w ww.android-hilfe.de/jiayu-g4-forum/441446-jiayu-g4-gps-20.html#post7161636
litening said:
Hi Pankaj459,
I tried the software fixes, which got me a quicker fix. Unfortunately the fix is not very accurate.
Very often the GPS loses its way and I find myself about 100yards beside the road or in a nearby street.
I opened up my G4A and noticed that the 3rd pole had already been isolated with black tape. I did also isolate the left pole. Nevertheless, did not see any difference.
The fix took just as long/ short. Accuracy was just as dismal.
Is there anything else I can do? Would it actually help if I modded some copper wire to the GPS contacts, or would that not solve the issue?
Thanks in advance for your help.
Litening
Click to expand...
Click to collapse
So do you think the solution has to do with putting aluminium paper in the antenna? I have seen that fix in THL and it seems to fix the accuracy, maybe it is the solution.
Would anybody share a little tutorial on how to do it?
ertioct said:
So do you think the solution has to do with putting aluminium paper in the antenna? I have seen that fix in THL and it seems to fix the accuracy, maybe it is the solution.
Would anybody share a little tutorial on how to do it?
Click to expand...
Click to collapse
Hi
You should try to follow this step by step tutorial about configuring GPS + antenna mod , it reaches up to two meters accuracy in motion in a Jiayu G4T :victory: :victory:
A version in Spanish is available as well --> Versión en español :highfive:
[Q&A] WiFi stuck on turning on; MAC 02:00:00:00:00:00; G2 G3 G4 G5 Nexus5 Nexus 7 etc
Hi!
If you are reading this now, you are probably one of the unlucky fellows who's WiFi (and Bluetooth) stopped functioning, and if so, you are probably deperately searching for a solution/fix. I might have something for you, but first:
*** DISCLAIMER/WARNING ***
You yourself are exclusively responsible for whatever may (or may not) happen to your mobile device, to yourself or others. I am only giving hints/advices here that *MAY* help, but I will not take any responsability, nor will I provide any support, in absolutely *ANY CASE*, including, but not limited to: your problem not being solved or/and your mobile device becoming partially or completely broken. Let me be very clear: If you do anything to your device rendering it useless, destroying it, seriously or fataly injuring you or others, and then come blaming me or/and cry for help, I will point my index finger at you and laugh at you. Period.
If you are a impatient person and want to get straight to the point, jump right to section 6.
Table of Contents
0. Foreword
1. Description of the problem
2. Urgent advice
3. Things that didn't work
4. There is little hope
5. My most obvious advice
6. LET'S GET SERIOUS!
6.a Sellotape / Scotch tape
6.b Refrigerator / Freezer
6.c Oven
0. Foreword
Two or three months ago, one fine morning, the WiFi/BT of my LG G2 suddenly stopped working. Initially I thought this would be only one stupid annoying minor thingy, that I’d be able to solve it fast. I was wrong.
1. Description of the problem
When turning on the WiFi, it would just stay in "Turning on..." forever. Similar thing for Bluetooth: It would stay on for a few seconds and then turn itself off again after. (But then, who needs Bluetooth anyway, WiFi ist probably 100 times more important...). I have thoroughly searched the internet, and I found quite some videos with exactly the same problem (remove the two blanks from the links to watch):
h ttps://w ww.youtube.com/watch?v=fRGnQz1zUmw
h ttps://w ww.youtube.com/watch?v=4W8YJMDFM88
h ttp://w ww.dailymotion.com/video/x2cuyjt_nexus-5-turning-wifi-on-frozen-problem_tech
2. Urgent advice
I want to prevent you from wasting countless hours searching for a solution - I wasted so much of my time already, no need for you to repeat that. Therefore: *Please* be aware that there is a VERY HIGH PROBABILITY that this issue is being caused by a hardware defect. I can not speak for all devices of course, but keep in mind that the main reason I wasted so much time, was me beliving it was some software issue! See the next section for a glimpse of stuff I have tried without any success:
3. Things that *DIDN'T* work
01. Restarting WiFi/Bluetooth several times
02. Rebooting the phone
03. Turning airplane mode on/off several times
04. Slapping/hitting the phone (this was indeed suggested in a forum)
05. Using WiFi-Fixer apps
06. Resetting to factory settings
07. Upgrading to newest Android version
08. Fully drained the battery and left it uncharged for several hours
(Rooted the phone)
09. Deleting the /data/misc/wifi/wpa_supplicant.conf
10. Deleting the whole /data/misc/wifi folder
11. Creating a file named ".bdaddr" in /persist/bluetooth containing a MAC-Address in hexadecimal format
12. Creating a file named ".macaddr" in /persist/wifi containing a MAC-Address in hexadecimal format
13. Flashing several custom ROMs to it (CyanogenMod, ParanoidAndroid, ...)
14. Going back to stock ROM
15. etc. etc. etc.
16. Several combinations and permutations of the above
4. There is little hope
Again, as the cause of the problem is most likely a hardware issue, I don't recommend going through all the steps as described in the previous section; however, though none of the steps worked for me, this doesn't mean that none won't work for you neither; you might be luckier than I was. In that case, enjoy your restored WiFi and be happy.
5. My most obvious advice
You need to replace the motherboard (main board) of your device.
Honestly, if you can afford it and it doesn't cause too many inconveniences to you, you'll be better off by simply buying a new device. If you don't want to buy a new device, send it in for repairs. If you don't want to do that as well, you'll have to fallback to a DIY solution:
I. Buy a new main board for your device. Be careful to get exactly the right component for your specific model. If you dont find any shop selling those, there are plenty of individuals out there that own devices with broken displays. You dont need the displays, you need the motherboard. Buy one such broken device, and you'll have your main board replacement.
II. Replace your main board or let someone else do it for you
Continues below.
continuation
6. LET'S GET SERIOUS!
If you are reading this, you either didn't read or you decided not to follow my most obvious advice in section 5. So be it. If you want to carry on from here, be sure to re-read my disclaimer at the top of my post.
There are 3 DIY possible fixes for the WiFi problem - none is guaranteed. I will describe them from the most harmless to the most kamikaze/deadliest. All of them will require you to open your device; if you are not careful and damage any of the components inside, you will end up with a worse device than before - but hey, don't say I didn't warn you.
At this point we assume that the cause of the problem is a faulty solder joint of your WiFi IC. The goal is to try to restore that solder joint. To do that, you will have to:
I. Open your device
II. Find your main board and separate it from all connected plugs
III. Find / identify the WiFi IC chip on the main board. I recommend searching for a service manual for your device, or/and searching for a disassembly video for your device; you need to know which one of the chips on the main board is the WiFi one.
Once you have identified your WiFi chip, you have 3 options, which you may combine with each other, but I recommend to try them out one-by-one as follows:
6.a Sellotape / Scotch tape
You need to make sure that your WiFi chip is pressed against the main board (ideally, this ensures the broken contacts touch each other, solving the problem). The best way to achieve this, is to attach a series of tape strips on the top of the WiFi chip, causing it to be pressed against the main board by the surrounding cover/hull once you reassemble/close the device. The tape strips are just a suggestion, do whatever you find convenient as long as you ensure that the chip is pushed against the board at all times.
This method may solve the WiFi problem already. When you turn your device back on, give it some time (5-10 minutes) and reboot it a few times if the problem still persists. My own WiFi didn't function right away, but after a while it finally recovered - hurray!
6.b Refrigerator / Freezer
Instead of using the tape as described in 6.a, you may first try to put your motherboard in a fridge for a few hours/days. But make sure to put it there in a plastic bag, and avoid moisture as much as you can, specially when taking it out of the fridge. Make sure its completely dry before reassembling your device!
By the way, try the refrigerator option BEFORE you try the freezer option!
6.c Oven
If everything else fails, the oven might be your last chance. This is not a joke, but as you probably can assume, it is "All-In" i.e. highly risky. The theory behind this is that high temperature will cause defective solder joints to reflow, reconnecting and thus fixing the problem.
You should only try this as a matter of last ressort. Be warned that you may fully destroy your main board, and there is a high chance that you will. Also, you may cause serious injury to yourself or others. Make sure you make backups of your data first. DO NOT BAKE THE WHOLE DEVICE, ONLY THE MAIN BOARD. DO NOT BAKE THE BATTERY!!
If you are still reading:
I. pre-heat your oven to 385° Fahrenheit (196° Celsius)
II. put your main board in the oven, bake it there for 7 minutes
III. remove from the oven, let it cool down until every component of the board has room temperature
Finally, here is a video of a guy doing a similar thing, but with a heat gun:
h ttps://w ww.youtube.com/watch?v=A4n0j3uaS7E
Ok, this is all, I hope I could help you.
Good luck!
Summary
Hello all,
first of all, I want to thank brysclar and xbing6 for their valuable feedback! Thanks a lot guys! :good:
Now, in an effort to update this thread and in an effort of trying to summarize it in fewer words (my disclaimer above applies!):
- The described problem seems to affect mainly (all kinds of) LG devices
- The issue seems to be caused by a defective soldering of the Wi-Fi chip on the main board
- The defect seems to be induced by dropping or/and overheating the device; recharging the battery, big/long app or android updates or the flashing of custom roms could cause excessive heating
- brysclar pointed out that replacing the battery might solve the problem (I haven't tried this out myself, so I can neither deny nor confirm this)
- My recommended solution is 6.a - applying pressure on the Wi-Fi chip, pushing it against the main board, using tape stripes
- There is a video of a brasilean guy doing some similar, but using pieces of an old credit card instead of tape strips: https://www.youtube.com/watch?v=OJkdva2iOag BUT PLEASE NOTE THAT HE IS APPLYING THE PRESSURE ON A RANDOM SPOT, NOT DIRECTLY TO THE WIFI CHIP! It *may* work for you, but if it doesn't, find/identify your Wi-Fi chip and apply the pressure there
- If everything else fails, and only as a matter of last ressort, you may try what I have written in 6.c
So... this thread has over 500 views, but not one single reply.
Guys... what has your experience been? Have you tried anything out from the posts above, and if so, what was the result? Did it help you? Do you recommend anything? Has something else, not written here, worked for you?
There are a lot of people out there having the same problem. It would be great if you could give any feedback, share anything that helps the community.
Click to expand...
Click to collapse
I honestly didn't see this post before. You really covered every detail very well. So far, returning my G3 to stock and replacing the battery has fixed it for me. Weird. I know. I did try 90% of the things on your "things that don't work" list and you are correct. They don't work.
wlanmac 02/00/00/00/00, Bluetooth is OK
Hey, i just got an LG LS990 with same Wifi issue and i'm ready to try so WITNESS ME!
Thanks for an amazing and detailed post lml
Simply awesome.
I have similar issue with my Nexus 5x. It is QCA6174 hw 3.2 chip, lspci does not detect this chip any more. I am going to do a little bit investigation from device driver (cnss) perspective. It enables one GPIO to provide power to this WiFi chip, I will try read back this GPIO status to see if it is enabled. I do not have the schematics, I do not know how to check if power is supplied to this wifi chip.
lspci used to show below:
$ ./lspci
00:00.0 PCI bridge: Airgo Networks Inc Device 0300 (rev ff)
01:00.0 Network controller: Atheros Communications Inc. Device 003e (rev ff) (this is qca6174)
If kernel driver investigation does not reveal anything helpful, I will ask other guys to replace the chip.
I thought it is because of vendor partition is accidentally wiped out, maybe it is unlikely.
---------- Post added at 08:49 PM ---------- Previous post was at 08:40 PM ----------
As Bluetooth can not be turned either, I am tending to think this is hardware related as well. As described previously, I will see if I can check that gpio status.
investigating
xbing6 said:
I have similar issue with my Nexus 5x.
(...)
I am going to do a little bit investigation
Click to expand...
Click to collapse
Hi xbing, and thank you for your feedback! :good:
I am really curious and looking forward to hear the results of your investigation! I believe that in your case, too, the Wi-Fi/BT chip is not being supplied correctly due to a defective soldering. Note that I don't think that the chip itself is defective, only the contacts between the chip and the main board. So, before replacing the chip, I'd recommend to first try what I've written in 6.a (or check my update/summary above).
Keep us posted about everything you find out!
Sprint declined to fix my LS990 due to "water damage" being the reason for it not working, and wanted to charge me a $150 deductible for a $100 phone. Shimming the WiFi chip against the metal covering with some thermal pad I had lying around and adding a bit of sticky foam on top of the ribbon cable for the camera worked great! Much thanks!
Tomcat5 said:
Sprint declined to fix my LS990 due to "water damage" being the reason for it not working, and wanted to charge me a $150 deductible for a $100 phone. Shimming the WiFi chip against the metal covering with some thermal pad I had lying around and adding a bit of sticky foam on top of the ribbon cable for the camera worked great! Much thanks!
Click to expand...
Click to collapse
Any idea if thermal paste/grease could work?
unlikely
NavHur said:
Any idea if thermal paste/grease could work?
Click to expand...
Click to collapse
Hi NavHur,
since the problem is mostly caused by a loose Wi-Fi chip, respectively a defective solder joint, using thermal paste or grease is unlikely to help; again, what you need to do is to have your Wi-Fi chip pushed against your main board. You can use your imagination on how to accomplish this; what Tomcat5 described he did ultimately led to exactly having his chip being pressed against the board.
Of course you are free to try whatever you want - if you find new solutions please post some feedback.
Good luck.
NimbleWeasel said:
Hi NavHur,
since the problem is mostly caused by a loose Wi-Fi chip, respectively a defective solder joint, using thermal paste or grease is unlikely to help; again, what you need to do is to have your Wi-Fi chip pushed against your main board. You can use your imagination on how to accomplish this; what Tomcat5 described he did ultimately led to exactly having his chip being pressed against the board.
Of course you are free to try whatever you want - if you find new solutions please post some feedback.
Good luck.
Click to expand...
Click to collapse
Thanks you so much, I placed a small piece of plastic above the wifi chip and one next to the camera lens. Now the wifi works fine. However my screen was pushed up so it bended a little. The faulty thing was my battery, not the added plastic. I compared mine with the one of a friend, mine was 1 mm bigger. (also with the battery of my friend's g3 the screen was fine)
I'll be changing it soon.
same problem as u but sometimes wifi works(mainly fully charged) and sometimes dont
i have lg g2 D802 model. It had a wifi problem as u shown in your videos,my phone also behaves same like yours but sometimes it works normally like while charging,works like 2 or 3 times a day(for 5-10 min).please tell me whether my phone got ic problem or software issue
Pratap94 said:
i have lg g2 D802 model. It had a wifi problem as u shown in your videos,my phone also behaves same like yours but sometimes it works normally like while charging,works like 2 or 3 times a day(for 5-10 min).please tell me whether my phone got ic problem or software issue
Click to expand...
Click to collapse
Hi Pratap94,
nobody, neither here in this forum nor elsewhere in the internet, will be able to give you a reliable answer without having a *physical* look at your phone. Nobody.
However, I can give you my opinion, based on the stuff you wrote: The fact that it works normally sometimes, specially while charging (probably it heats up in the process?), indeed seems to indicate a hardware issue. I believe you have a loose Wi-Fi chip i.e. a defective solder joint, like I had on my LG G2 D802 as well. I solved my problem by doing the stuff I described in 6.a.
Good luck.
Thank you so much
NimbleWeasel said:
Hello all,
first of all, I want to thank brysclar and xbing6 for their valuable feedback! Thanks a lot guys! :good:
Problem solved good bless you!! the problem is fix in that youtube video XD
Click to expand...
Click to collapse
Sadly step 6.a did not help me. Well, it worked for first 5-10 minutes and then back again.
Olzhas18 said:
Sadly step 6.a did not help me. Well, it worked for first 5-10 minutes and then back again.
Click to expand...
Click to collapse
Hi Olzhas18,
that might be an indication that your WiFi chip is still a bit loose and is not sitting tight enough on the main board. On LG G2, it is difficult to push the chip against the board because it's covered by a metal cover...
Also, did you check out this video: https://www.youtube.com/watch?v=OJkdva2iOag ?
Good luck!
NimbleWeasel said:
Hi Olzhas18,
that might be an indication that your WiFi chip is still a bit loose and is not sitting tight enough on the main board. On LG G2, it is difficult to push the chip against the board because it's covered by a metal cover...
Also, did you check out this video: https://www.youtube.com/watch?v=OJkdva2iOag ?
Good luck!
Click to expand...
Click to collapse
Thank you this tip and this whole thread. I have seen this video, but still the same effect. 5-10 minutes, I can rean some news and back to flashing. I'm going to buy Huawei Honor 8 soon, it was the last chance to recover my G4. I doubt I will purchase any other phone from LG.
Same boat
But bluetooth working
In cm roms also wifi tethring can be onn
But u cnt turn onn wifi
I had the same issue, can't turn on Wifi after factory reset.
I turn off my device off after one hour and reboot wifi was OK but when I want to upgrade some apps iwifi turn of again and my phone reboot with no SIM card.
I do "6.a Sellotape / Scotch tape" + a creedit card cut with this video https://www.youtube.com/watch?v=6_0jzp65eLY#t=73.319872
My LG G2 works fine