Bluetooth & WiFi Calling, Won't work together - T-Mobile LG G2x

I cannot use bluetooth headset and wifi calling simultaneously on the same call. If I attempt to initiate such a call it promptly disconnects before even attempting to dial. If I try to turn bluetooth on while already in a call over wifi it immediately disconnects the call.
I would like to know if this is a hardware or software design issue or if it is a problem with my particular phone. Can anyone make such a call?
Otherwise both my wifi and bluetooth are rock solid. I walk all around using either technology in a call without problem.
G2X
Cyanogen Nightly 50
Cyanogen stock kernel
No 3rd party CPU/Battery programs running.

Cubeology said:
I cannot use bluetooth headset and wifi calling simultaneously on the same call. If I attempt to initiate such a call it promptly disconnects before even attempting to dial. If I try to turn bluetooth on while already in a call over wifi it immediately disconnects the call.
I would like to know if this is a hardware or software design issue or if it is a problem with my particular phone. Can anyone make such a call?
Otherwise both my wifi and bluetooth are rock solid. I walk all around using either technology in a call without problem.
G2X
Cyanogen Nightly 50
Cyanogen stock kernel
No 3rd party CPU/Battery programs running.
Click to expand...
Click to collapse
I consistently had that problem with CM7 on Mt4G.
It works with Froyo on G2X (EB 1.0.2 and faux 'stock" UV Ext4 kernel). I have not tried it on G2X and CM7 - but it sounds like it is a CM7 issue.

Related

Bluetooth Issues

I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
golfman32 said:
I am having multiple issues with Bluetooth on TouchPro2:
Issue # 1 with no solution
When trying to end calls using the end button of Jawbone Prime, it does not work, you must end call using the handset.
Issue # 2 (New)
When ending calls with any Bluetooth device (in my case built in Bluetooth in Nissan Altima) the calls will not terminate, have to press end button many time before calls ends
Are there any Bluetooth registry hacks that may solve either one of these issue?
Click to expand...
Click to collapse
I see the same issue. Sorry no solution.
I confirm same end issue ....although until reading above i didnt know it stemed outside of the plagued nissan vehicles with navigation.
I have a lot of confidence that this will be fixed sooner rather than later since it is now affecting everyday bt headsets vs. one isolated group of nissan / infinity vehciles.
For those who own this phone and a nissan / infinity. we will take this partial victory as it has been a long two years since the last known phone from htc that worked correctly with our cars was a mogul with WM5 / before that the apache.
Its nice to have a working touchpro 2 and nissan ...even if its not 110% with the disconnect issue.
I have an 08 Nissan with the Bose/Communications/convenience package, and my bluetooth worked fine with my i760, xv6800, and Touch Pro. But I experience the disconnect issue as well now with my TP2. Must be the new HTC drivers.
We'll standby for a patch. But I'm pretty sure even though the time keeps running on the radio, that the call still disconnects. In any case, it isn't right, and I doubt we'll see it when we get patched to 6.5.
FYI, from my research this is the widcom stack on the TP2. I thought i read that in the tmobile TP2 forum.
That would explain why it works because microsoft rarely fixes things on windows mobile.
If so it only more confirms ms at fault and not nissan.
The nav radio was always different than the non nav bose radio in the nissans. Different BT modules i believe.
That would explain why you didnt have the problems that so many others did.
I might be wrong on the widcom stack but I woudl think the tmobile and cdma variety are using same chipsets and drivers. for the BT radio
BMW bluetooth
Same issues on BMW bluetooth
Having simmular problems with an JVC BT1 specielly if i use AD2P at the same time.. phone can lag for like 10-20-30 sec someethimes even more....
Getting VERY tired of this!
several BT issues
I seem to be having the same issue as most of the post on this thread ...my headset, and my Infiniti will not end my call , but has anyone else had a problem just trying to get the bluetooth to open from comm manager or settings ? When I try to turn on Bluetooth through my comm manager it says cant turn on bluetooth , and when I try trough settings it says cannot start the Blutooth stack ???? If i do a soft reset BT will work but if i disabale and try to connect again im having the same issue ....some one help me out
TP2 sprint
have exact same issue with my parrot MK6100
have to press end call many time on the remote to end the call sucessfully
Me too, also using Parrot 6100
The bluetooth is a nightmare. I have a Pioneer AVIC-F90BT with v3 software and I can't even answer the phone when it rings. I even sent to phone to automatically answer after 1 ring and when BT is connected it just freezes the dialer. Then when I hang up a call the phone freezes for about 20 seconds. It sucks so bad.
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
I think the blue tooth issues are due to the locking of the fm raido they reside on the same chip they talk about this on ppcgeeks
I have issues with my Ford Sync as well. If bluetooth is on and I want to use the Sync system I have to turn off bluetooth then turn it back on to get it to work. Quite annoying. I never had any issues with my XV6800 so it must be the bluetooth radio in the phone. Hopefully they come out with an update or when 6.5 is out it gets fixed.
WITHOUT DOUBT THE BLUETOOTH on the TP2. I have the same issue with Parrot 3200. It may be that different drivers would help.
Anyone been brave enough to try anything else?
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
arche3 said:
verizon tp2, jawbone prime.
from prime: I can initiate voicecalling. I can answer a call. I just cannot end a call from the headset.
Click to expand...
Click to collapse
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Ohiowa said:
Ditto here, but I'll take it a step farther:
I'm using a Jawbone Prime with my Verizon Touch Pro2 and it's not only unable to end calls from the headset, but it will disconnect the headset at random in the middle of calls. The only way I figure it out is to pick up the phone when I can't hear anything, only to find the "headset disconnected, place the handset to your ear" message.
Annoying.
Click to expand...
Click to collapse
Seeing exact same random disconnect issue with my jawbone prime and my sprint touch pro 2. It happened twice today. One time I was speaking and didn't even realize it had happened for several minutes! Any fix for this?
I contacted HTC over this. The more people that complain about it to HTC, the quicker they will release a fix.
MS BT Stack on TP2
helix139 said:
Same setup and results here, and additionally the redial last number feature is spotty at best.
When HardSPL comes out, I'm going to offer a bounty for $50 for whoever can get the MS stack working correctly on our devices with all profiles. Anyone else in with me?
Click to expand...
Click to collapse
I am in. I need the MS stack for my wireless keyboard and mouse.

[TIP] Improve Audio Quality of Calls or Music Over Bluetooth on the Captivate

I have been having intermittent issues with Bluetooth audio cutting out on my Captivate while I am on a phone call over Bluetooth. I believe the problem stems from Samsung's inability to do anything right and their implementation of Bluetooth 3.0. A new feature of Bluetooth 3.0 is the ability for a Bluetooth connection to transfer data over Wifi if both Bluetooth devices support 3.0 and have compatible Wifi chips. Samsung implemented this poorly, not a real surprise, and now Wifi is causing the Bluetooth data transfers to be spotty causing streaming data, voice calls or audio streaming, to to be adversely affected.
I was able to finally narrow down the problem. I received a phone call yesterday on my cell phone and I picked up the call on my Bluetooth enabled home phone. The call sounded horrible, noise and the other caller was cutting out, but not enough that I couldn't understand the other person, so I continued the call. The person on the other end did not seem to have any idea that the call sounded so badly, so it seemed to be something limited to my end. During the call, I went over to my Captivate and turned off Wifi. Instantly, the call cleared up and the quality was good to excellent.
I use Wifi all of the time especially at home, so I wasn't going to be turning off Wifi all of the time, so I needed a workaround. Using an App called Setting Profiles, I am able to have Wifi automatically turn off anytime I am on a call and then when the call is completed it turns Wifi back on. What's even better is that the app will note the state of Wifi before a call, so if Wifi is already off before a call, it will not turn Wifi on when the call is ended. The Tasker app will allow you to do the same thing, so if you already have Tasker you won't need Setting Profiles.
This tip will probably only work on the Samsung Galaxy S line because these phones use Bluetooth 3.0, where most Android phones use 2.1 or earlier and do not support Bluetooth file transfers over Wifi. I have only experienced it on the Captivate so I can't say if it will work for any other Galaxy S phone.
Since both wi-fi and BT uses the same 2.4Ghz frequency, interference maybe anticipated although new BT hardwares are pretty good at reduce such interferences.
Did you try change your wi-fi router frequency/channel so that it won't interfere with your BT? Try that so that you may not need to turn off wi-fi on the phone at all.
I have had the issue occur in my car while not near any Wifi router. Also, the router was still on when the call quality improved. It's not like the radio waves from the router and three other Wifi devices in my house disappeared around my phone just because I turned off the Wifi on my phone.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the tip

Cannot use Bluetooth on WiFi

I had a similar problem on CM ROM's on Mt4G, but that was because of poor strength of WiFi in CM kernel - it would disconnect the WiFi.
With G2X, it stays connected, and the Bluetooth is connected when on WiFi calling, but sound only on the device - not through the bluetooth. Calling on Network - Bluetooth works fine.
I am in home office, so use WiFi most of time.
Another issue - but probably not the G2x- Google voice dialing really sucks. Also was the case on MT4G - used Dragon Diction/Genus App - much better. Trying a market app, but not as good as D&G.
Works for me. I turned Bluetooth on first, and then Wi-Fi calling.
i syned my earpiece to BT had to restart the phone now it wont pair or find the device when i hit scan
BarryH_GEG said:
Works for me. I turned Bluetooth on first, and then Wi-Fi calling.
Click to expand...
Click to collapse
May not have tried it that way yet - will give it a whirl.
I have a similar issue relating to bluetooth and wifi...here is my issue:
If I have both BT and wifi tether on it works, but as soon as i turn off WiFi tethering none of my BT devices will connect untill I reboot
I am also having trouble with my blue tooth. I use a handsfree device in my car. It syncs the blue tooth but seems to mute the sound. It doesnt work.

Call "muted" (both sides) when activating bluetooth during a call

Hello,
since I've upgraded the ROM I am using now (Endymion) to the latest version (3.4) I have a strange problem.
I am opening a new thread because I am not pretty sure it is a ROM related issue (instead it could be a radio related problem, but this has never happened before, with the same radio I am using now). Kernel issue??
The problem is that if I activate the bluetooth and then connect my bluetooth headset, the call is like interrupted so I can't hear the voice of my interlocutor and vice versa for about 10-15 seconds. Then it goes as usual.
I've noticed this issue because I have a Tasker rule which activates the bluetooth if a certain person calls and if I am at home. But this happens even if I activate the bluetooth by hand.
Do you have an idea of what could the cause of this problem be?
I'm sorry, i can't really help you i just can tell you that i'm also on Endymion V3.4 and i often use a Bluetooth headset.
But everything works fine, i have no issues like you.
I often use Bluetooth headset too and the headset is working good for me, but it's the bluetooth activation that makes this problem happen.
Did you try to switch bluetooth ON during a call?
What radio do you use?
Yes i often switch on my Bluetooth headset during a call and I immediately hear the partner in my ear
I have never changed radio, because everything works fine for me (never change a running system).
The second reason is, that i can't flash radio, because I'm S-On. I used HTCDev in case of unlocking the bootloader.
I've actually not had a problem making or receving calls when using a Bluetooth head set.
However i have some time had problems listing to music on the headset when i'm out in public, however i think that might be the headset.
Would changing the radio change that?
Shamz84 said:
I've actually not had a problem making or receving calls when using a Bluetooth head set.
Click to expand...
Click to collapse
Again, such sentence tells me I wasn't clear enough.
I've never had a problem making or receiving calls when using a Bluetooth headset too!.
Indeed, the problem occurs when, and only when I activate the bluetooth during a call.

Idol 3 Bluetooth + Wifi while driving or changing Wifi

While driving bluetooth stops or some time lag voice if wifi is on. same issue noticed without wifi enable also but very less.
It seems whenever wifi changes to different network or connects or disconnects bluetooth is loosing or lagging voice.
Where as if i put it on speaker i can hear sound from speaker. I tried 5-6 different bluetooth and having same issue. i got replacement of phone also but same issue with new phone also. I could verify with older phone and it seems issue is only with Idol 3. Is any one else facing similar issue?
I tested this using a Bluetooth headset, and I am unable to replicate it. Turning WiFi on and off has no noticeable effect on playback via a the Bluetooth headset. Unfortunately , I have no way to test this while driving .
stl1859 said:
I tested this using a Bluetooth headset, and I am unable to replicate it. Turning WiFi on and off has no noticeable effect on playback via a the Bluetooth headset. Unfortunately , I have no way to test this while driving .
Click to expand...
Click to collapse
This issue is mainly happening while driving. It seems like while driving phone tries to goes from LTE to different modes and same with wifi as it tries to connect to different wifi. In this process it starts to lags voice on bluetooth and in few cases sound get disconnected.
Are you listening to music on your phone or streaming?
I haven't had any issues while driving using both Google music and slacker. Those are the only two streaming apps i use tho. I leave my Wi-Fi on all day. My deck is a Bluetooth pioneer unit, though the model number escapes me at the moment. I'm on T-Mobile BTW.
I don't drive anymore but I stream Rhapsody overnight onto my BT speakers and it never has conked out on me yet. There was one time I did lose the BT connection to the speakers before I did the factory reset but no issues with the BT since.
Issue is not with listenting music, it is during call through bluetooth while driving and having wifi and bluetooth both on.
OK I'll test that later on today. How often/with what frequency does it happen to you?
psu2fan said:
OK I'll test that later on today. How often/with what frequency does it happen to you?
Click to expand...
Click to collapse
Almost 2 out of 3 attempts i am having this issue. even now in home i started call on bluetooth when wifi was off, then just put wifi one during call and voice from bluetooth started to get blurry and then other party could not hear me. and i had to disable wifi and then disable bluetooth and then on bluetooth again in phone.
Seems like issue is happening when phone is trying to connect to wifi and call is on bluetooth...
airplane mode on, wifi and blutooth on, LG HBS700 oem + netflix = audio lag. firmware update did not help. not ready to switch from s4 just too many quirks.
pepper454 said:
airplane mode on, wifi and blutooth on, LG HBS700 oem + netflix = audio lag. firmware update did not help. not ready to switch from s4 just too many quirks.
Click to expand...
Click to collapse
I do not have Netflix - but I tested with HBO Go - and YouTube - with airplane mode , WiFi and Bluetooth - And I am not seeing any audio lag - or audio interruption when switching from speakers to Bluetooth mid session. I am using Arctic P253BT headphones.
Alright I did a call today. It was only 5 minutes long but didn't notice anything. I'll try doing what you did starting a call in my driveway and turn WiFi on/off repeatedly at various time intervals.
I got replacement, but i can still see the issue with new phone also...
attitude_it7 said:
I got replacement, but i can still see the issue with new phone also...
Click to expand...
Click to collapse
Sorry, my testing is put on hold as I had to send the device in to get a new screen (cracked). I couldn't get it done before because my wife kept stealing my car
I'm having kinda' the same problem. The thing is everytime I connect/disconnect there's a general lag in the phone! after one minute or so, it starts working ok
jcipactli said:
I'm having kinda' the same problem. The thing is everytime I connect/disconnect there's a general lag in the phone! after one minute or so, it starts working ok
Click to expand...
Click to collapse
It's possible the bluetooth is unreliable because the phone gets busy as you indicated...I posted a couple of apps in the idol 3 apps section that help reduce lag and may help this...
Something I've done has made my bluetooth totally unreliable....whether linked to car or home phone system I can answer...talk for a few seconds and then it transfers the call back to the cell instead of the bluetooth device. I'll have to go back through my backups and find a version that doesn't do this.
I have demonstrated the same effect with my bt device (lg). When switching wifi networks bt microphone stop receiving so other party cannot hear me and the audio begins to break up and lag. I can switch off bt then back on and am fine till next wifi switchover. I was hoping the update from Alcatel would address this, was not the case. ;(
I also had the same kind of issue while listening music in car using Bluetooth, strangely it is happening when the WiFi try to connect to open WiFi available. And when that open WiFi is not able give internet accesses, then the phone just get stuck for some time. I have these issues frequently I need to restart my phone
I just purchase Alcatel Onetouch Idol 3 and and am having similar problem. I had a Plantronics M50 connected and people complained that I was breaking up and they couldn't hear me and it happened on my end sometimes too. When I'm calling someone, the ring will be normal at the beginning of the ring and then it will fad out at the end of the ring. Store rep told me this was normal. Has never done it with any of my other phones. Bought another bluetooth to try to determine if it was the bluetooth or the phone. Bought the Plantronics E50 and the same thing happens. Alcatel says it's the bluetooth and Plantronics says it's the phone. Betty at Alcatel also says the Plantronics bluetooth are not compatible with the Alcatel, however, the store sells the Plantronics Marque II to use with the Alcatel. Anyone have any suggestions or having the same problem?
I'm having the problem in car on bluetooth where the caller sounds like they are underwater and garbled and I'm told I do too. It comes and goes, very frustrating. I tested another Android and no problem.
skisom said:
I just purchase Alcatel Onetouch Idol 3 and and am having similar problem. I had a Plantronics M50 connected and people complained that I was breaking up and they couldn't hear me and it happened on my end sometimes too. When I'm calling someone, the ring will be normal at the beginning of the ring and then it will fad out at the end of the ring. Store rep told me this was normal. Has never done it with any of my other phones. Bought another bluetooth to try to determine if it was the bluetooth or the phone. Bought the Plantronics E50 and the same thing happens. Alcatel says it's the bluetooth and Plantronics says it's the phone. Betty at Alcatel also says the Plantronics bluetooth are not compatible with the Alcatel, however, the store sells the Plantronics Marque II to use with the Alcatel. Anyone have any suggestions or having the same problem?
Click to expand...
Click to collapse
There's a problem with the phone. It happened after the last Android update. My bluetooth was fine until marshmallow. It's so bad I went back to my Galaxy S4. I loved the Idol for just about everything, but horrible bluetooth. People can't hear you, it's a deal breaker.

Categories

Resources