New to all this rooting and flashing ROM's and need some serious help since I can't figure it myself. I'm running a HTC Droid Eris, Firmware 2.1, have it rooted, and ROM manager. When I go in to back up my ROM, it reboots, then the screen comes up with a red /!\ over a phone. This also happens when I try to install a new ROM as well. I don't know what's going on or how I can fix this. Any help would be appreciated. Thanks for all your time.
I think you should fully wipe your phone.
When you reinstall new rom without wipe may cause some unexpected error.
I can't even back up my Rom on there right now. By the way, how do I fully wipe my phone? Thanks for all the help.
Did you press flashclockwork recovery in RM first? And about that /'\ when you hold volume down and power youll get a menu then you should select recovery, once there youll see /'\ then you should hold volume up and power and then youl be in stock recovery. Once you have flashed a successful clockwork recovery image through RM , you might have to either select reinstall packages twice through your stock recovery first before clockwork will kick in. If you dont have that option in stock recovery, then just enter stock recov twice and the clockwork should overide the stock. If that doesnt help search amon ra's ( custom recovery )for your device videos of this are on theunlocker.com
SGS I-897 CM7- ESCAPIST KERNEL & TKGLITCH 1.55GH
Did you use Titanium Backup? Great app btw.. And Rom manager, you used the Clockwork recovery mod correct? That's how I flash.
I did click on Flash Clockwork Recovery a few times, but can't find where it says to reinstall packages. I tried volume down and power, but didn't see a menu that says recovery. I'll try to find something on the unlocker. Thanks for the help. Hope I can get it to work.
InfiniteStorm said:
Did you use Titanium Backup? Great app btw.. And Rom manager, you used the Clockwork recovery mod correct? That's how I flash.
Click to expand...
Click to collapse
Be very careful with Titanium. It's a great app, and very useful for a lot of things, but many users have had problems when restoring apps.
A general rule of thumb is when switching ROMs, try to restore as little apps+data as possible. App only is usually the best route.
I was experiencing many ROM issues on multiple ROMs after restoring, even only apps without data. Now I just use titanium to freeze apps, detach apps from the market, and uninstall apps. I reinstall all my apks directly from the saved files on my SD card.
Sent from my Inc using Nil's Business Gingersense. Now that's Incredible.
Rockchris said:
I did click on Flash Clockwork Recovery a few times, but can't find where it says to reinstall packages. I tried volume down and power, but didn't see a menu that says recovery. I'll try to find something on the unlocker. Thanks for the help. Hope I can get it to work.
Click to expand...
Click to collapse
Make sure your phone is off before the volume down+power to boot into recovery. If that doesn't work and it only makes the phone reboot itself, battery pull first, then volume down+power. That should get you into recovery.
If you still have a lot of problems with CM, try amon-ra instead.
Sent from my Inc using Nil's Business Gingersense. Now that's Incredible.
I copied a ROM to my SD card, but when I go in to Apply sdcard:update.zip, I get the following:
Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/update.
zip (no such file or directory)
E:signature verification failed
Installation aborted.
Why does this happen?
After I hold the power and vol up buttons in stock recovery this appears too.
E:Can't open /cache/recovery/command
Are you using clockworkmod by RM? Or you doing this all by stock recovery. In rom manager. Flash clockwork, then below that is reboot into recovery try that and see what you get. Also, if you flashed clockwork via rm, you should see an update.zip file. On your internal sd. Do you have that on your internal SD. And are you putting the rom file on your internal sd?
Sent from SGS Captivate CM7 or MIUI with Escapist orTKGlitch using XDA premium app.
I did all that and still get this (E:Can't open /cache/recovery/command). I downloaded the ROM I want on to my computer, then copied it to my sd card, but nothing seems to work. I even went in to RM and tried to get the ROM straight from the sd card and keep getting that message. What am I doing wrong? Would Verizon help me if I took it in? Also, if there is anyone in Beaverton Oregon willing to help me, that would be awesome so they could see it hands on. Thanks for all the help and info.
Related
okay my phone is stuck on a force close loop so i cant do much but i have managed to flash clockwork mod onto my phone but now i dont know how to get to it, i read i could get to clockwork by doing update.zip but how do i do that?
what phone are you using?
samsung fascinate
http://www.mydroidworld.com/forums/fascinate/4786-how-flash-clockwork-recovery-fascinate.html
To use clockwork, you can reboot recovery and Rom Manager, or cold boot into recovery (power off phone, power back on while holding both volume keys). If you cold boot into recovery you need to select apply update.zip and it will launch ClockworkMod.
the apply update.zip doesnt do anything
have you tried to use ROM Manager?
no idea what that is but keep in mind i can not do anything on my phone at all, everything force closes only thing i can do is mount and unmount
clockwork wont really help in this case then. Clockwork allows you to make a nandroid backup that you can restore in an instance that something fouls up. I know with the droid 2 we can do something called a SBF flash which will do a factory restore to the phone. Sorry I cant be of more assistance for this issue. Best of luck buddy.
put a custom rom on your SD card, boot into clockwork and then flash the custom rom from sd card
I have been unable to restore any of my nandroid backups. They are all listed, but nothing happens when I select one. I tried doing it first with ROM Manager and then tried the Vol Down - Power button approach. All I get is a blank screen. Does anyone have any suggestions? I have no trouble installing ROMs from the SD card.
u should have a custom recovery installed in the first place.. do this..
go to recovery by holding down home+vol down+power..
use the stock nandroid backup..
Did you say to hold down Home+Vol Down+Power? I haven't heard of using the Home button before.
yes in some buttons its home button+power+vol down
try it
Try updating CWM in ROM Manager. The latest version is 3.0.1.0
I tried flashing ClockworkMod using ROM manager, and the first time I tried it I got ClockworkMod 2.5. I have tried several more times, but now it immediately responds with a message saying it was successfully downloaded. It couldn't have downloaded anything that fast! Also, I have made several nandroid backups but am unable to restore them and am wondering if I need to have S-OFF for it to work. If so, how well does the Unlockr unrevoked-forever.zip program work? I can flash it from the SD card since I have successfully flashed the Froyo USCC ROM. That much does work.
They should be there.
Sent from my DROID2 using XDA App
After successfully flashing ClockWork RecoveryMod, I placed SU on the root of my SNS, powered it off, went into fastboot, but when I went into Recovery, it just went to Stock Recovery, the Exclamation Mark inside the Triangle with the Android next to it appeared, but no text or anything else is on the screen. I've let it sit for about 15 minutes, and nothing. I also can't do anything by clicking the volume buttons, or the power buttons. I've also unplugged the Phone, held the power button to try to reboot it, held volume-up and power to try to go back into fastboot, but nothing. Should I pull the battery? Why didn't it go into ClockWork RecoveryMod? Command Prompt gave me the whole " sending 'recovery' (3980 KB)... OKAY [ 0.621s]
writing 'recovery'... OKAY [ 0.511s]
finished. total time: 1.132s" thing...
What do I do? I can't just leave it sitting like this forever.
Edit: I unplugged and replugged it a few times, and it rebooted. But I've tried going back to fastboot and going into Recovery, and I get the same screen, over and over. I've even tried flashing CWRM again, and nothing. I'm using 3.0.2.4. Should I just use 3.0.0.5?
When you are in the stock recovery mode and you see the exclamation mark inside the triangle: Just hold the power button and hit volume up and you will get into stock recovery where you can perform a reboot etc.
Just try 3.0.0.5. There is something wrong with clokwork mod it you just went into stock recovery. You should be fine if you follow one of the guides on this forum.
If you still are using the stock rom. This only applies of on stock root rom because the custom rom have the edited already. You must do this. If you don't then you will have to flash clockwork ever time you reboot.
Reboot your Nexus S
Download and install Root Explorer app from Android Market
Open Root Explorer and navigate to etc directory
Tap on the gray box that says Mount R/W
Tap and hold on the file install-recovery.sh and rename this file to install-recovery.sh.old
Once renamed, download and install the app called ROM Manager from Android Market
Once installed, open ROM Manager app and choose Flash ClockworkMod Recovery option.
Hawky_ said:
When you are in the stock recovery mode and you see the exclamation mark inside the triangle: Just hold the power button and hit volume up and you will get into stock recovery where you can perform a reboot etc.
Just try 3.0.0.5. There is something wrong with clokwork mod it you just went into stock recovery. You should be fine if you follow one of the guides on this forum.
Click to expand...
Click to collapse
I tried it again with 3.0.2.5 from http://forum.xda-developers.com/showthread.php?t=988686. Did not work. Went again into Stock Recovery.
jerrycycle said:
If you still are using the stock rom. This only applies of on stock root rom because the custom rom have the edited already. You must do this. If you don't then you will have to flash clockwork ever time you reboot.
Reboot your Nexus S
Download and install Root Explorer app from Android Market
Open Root Explorer and navigate to etc directory
Tap on the gray box that says Mount R/W
Tap and hold on the file install-recovery.sh and rename this file to install-recovery.sh.old
Once renamed, download and install the app called ROM Manager from Android Market
Once installed, open ROM Manager app and choose Flash ClockworkMod Recovery option.
Click to expand...
Click to collapse
I'm a bit confused with your post.
I am still using the Stock Rom, but I don't have root access.
I've tried, after unlocking the Bootloader, going into Rom Manager and Flashing ClockWork, but it tells me first:
"You must root your phone for ROM Manager to function. Superuser was not found at "/system/bin/su" or "/system/xbin.su". (...)"
Then, when I still attempt to flash ClockworkMod, it tells me:
"An error occurred while attempting to run priviliged commands!"
I should have told the full story first.
I was once rooted, but it was through ROM Manager and flashing Clockwork from there. But then I had a few issues with my Wifi, and I decided to flash back Stock Rom. I still had an unlocked Bootloader though, so I thought that just redownloading Rom Manager and flashing CWRM and having Superuser installed would work. It didn't. So I attempted to root all over again, this time, manually.
But, I always go back to square one, it seems, when I try to get into Recovery.
What up with that?
After you flash CWM recovery, go straight into recovery from the fastboot menu. Do not reboot. Do not power off. Flash CWM and when it finishes immediately press volume down to select recovery and then press power to go in.
The Nexus S will overwrite CWM with stock recovery every time the phone boots by default. This could be what is giving you trouble.
Sent from my Nexus S using XDA App
matt2053 said:
After you flash CWM recovery, go straight into recovery from the fastboot menu. Do not reboot. Do not power off. Flash CWM and when it finishes immediately press volume down to select recovery and then press power to go in.
The Nexus S will overwrite CWM with stock recovery every time the phone boots by default. This could be what is giving you trouble.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Thank you so much!
That was it!
After I did that, I went straight into Recovery, flash SU, rebooted, went into ROM Manager, Flashed CWRM from there, and boom.
I don't understand why AllGamer's guide didn't already say that could happen. I'll post a comment there.
Thanks again!
EonHawk said:
Thank you so much!
That was it!
After I did that, I went straight into Recovery, flash SU, rebooted, went into ROM Manager, Flashed CWRM from there, and boom.
I don't understand why AllGamer's guide didn't already say that could happen. I'll post a comment there.
Thanks again!
Click to expand...
Click to collapse
No problem.
There is a script located in the /etc folder called install-recovery.sh. it runs every time you boot and installs stock recovery. You have two choices: always use rom manager to flash CWM every time you need to access recovery, or use root explorer to rename install-recovery.sh to install-recovery.sh.bak so that it will not run and will leave CWM installed.
Glad you got it figured out!
Sent from my Nexus S using XDA App
Or a third choice of course would be to install a custom ROM because they tend to not include that script
Sent from my Nexus S using XDA App
EonHawk said:
Thank you so much!
That was it!
After I did that, I went straight into Recovery, flash SU, rebooted, went into ROM Manager, Flashed CWRM from there, and boom.
I don't understand why AllGamer's guide didn't already say that could happen. I'll post a comment there.
Thanks again!
Click to expand...
Click to collapse
If you are talking about this guide then it does warn about this problem. I used the guide to root my nexus s and I followed all his steps, including renaming the necessary file - http://forum.xda-developers.com/showthread.php?t=895545
This is from his 2nd post - called notes:
NOTES:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
buachaille said:
If you are talking about this guide then it does warn about this problem. I used the guide to root my nexus s and I followed all his steps, including renaming the necessary file - http://forum.xda-developers.com/showthread.php?t=895545
This is from his 2nd post - called notes:
NOTES:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Actually I think that guide does have two unnecessary steps that cause confusion. After flashing CWM, the guide instructs the user to power off, power on, and then to access recovery. The user should just access recovery immediately after flashing.
EDIT: I guess the problem is just that the bolded part should be added:
Then back on the SNS select Power Off (Reboot also works)
Power ON the SNS while holding volume up
buachaille said:
If you are talking about this guide then it does warn about this problem. I used the guide to root my nexus s and I followed all his steps, including renaming the necessary file - http://forum.xda-developers.com/showthread.php?t=895545
This is from his 2nd post - called notes:
NOTES:
It's normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you'll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you'll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
That's partly my fault, I never went down to the 2nd Post and saw those Notes, but what's the point of not including that already in the steps in the main Post? He could have just told to go straight from Recovery after flashing CWRM, but decided not to.
matt2053 said:
Actually I think that guide does have two unnecessary steps that cause confusion. After flashing CWM, the guide instructs the user to power off, power on, and then to access recovery. The user should just access recovery immediately after flashing.
EDIT: I guess the problem is just that the bolded part should be added:
Then back on the SNS select Power Off (Reboot also works)
Power ON the SNS while holding volume up
Click to expand...
Click to collapse
I think he should just have instructed to place the SU zip on the root of the SD card before flashing CWRM. That way, there wouldn't be a need to reboot to mount the SD to place SU, that way potentially losing the CWRM.
Dear people of awesomeness,
The story: I was following the exciting thread about the new CWM support for SGS4G by krylon360 and team, followed the directions (overwriting the recovery file WITH R/W enabled, placing update.zip into the root of my SD card...), and got stuck. Didn't know what to do exactly after that, other than try to use ROM Manager to backup my phone. Saw the "Reboot into recovery" option in the ROM manager menu and thought hey, let's see what this does. Most careless, stupidest thing I've done this year. fail.
The question: What is/are the way/s to boot into stock recovery mode? I can't seem to find a definitive method for booting into "stock recovery mode", though I've found plenty of ways to boot into download mode (a whole thread of them lol). I managed to find ONE method after reading through hundreds (honest) of posts in dozens of threads here and elsewhere: Hold vol+ Vol- and Power simultaneously from a powered off state.
The secondary fail: Obviously this didn't work for me, and although I'm near certain I'm going to have to do the "Odin" thing, I just wanted to ask if anyone could clearly explain the method to boot into stock recovery?
The shameless 2nd question: This question may have been asked elsewhere, shame on me, but... the .tar I'm downloading ([ROM-ODIN]T959VUVKB5 Stock + Root -- (hxxp://forum.xda-developers.com/showthread.php?t=978836)) will it wipe my phone?
akira6968 said:
Dear people of awesomeness,
The story: I was following the exciting thread about the new CWM support for SGS4G by krylon360 and team, followed the directions (overwriting the recovery file WITH R/W enabled, placing update.zip into the root of my SD card...), and got stuck. Didn't know what to do exactly after that, other than try to use ROM Manager to backup my phone. Saw the "Reboot into recovery" option in the ROM manager menu and thought hey, let's see what this does. Most careless, stupidest thing I've done this year. fail.
The question: What is/are the way/s to boot into stock recovery mode? I can't seem to find a definitive method for booting into "stock recovery mode", though I've found plenty of ways to boot into download mode (a whole thread of them lol). I managed to find ONE method after reading through hundreds (honest) of posts in dozens of threads here and elsewhere: Hold vol+ Vol- and Power simultaneously from a powered off state.
The secondary fail: Obviously this didn't work for me, and although I'm near certain I'm going to have to do the "Odin" thing, I just wanted to ask if anyone could clearly explain the method to boot into stock recovery?
The shameless 2nd question: This question may have been asked elsewhere, shame on me, but... the .tar I'm downloading ([ROM-ODIN]T959VUVKB5 Stock + Root -- (hxxp://forum.xda-developers.com/showthread.php?t=978836)) will it wipe my phone?
Click to expand...
Click to collapse
does your phone still boot up normally?
also when you get to the recovery menu it should be blue. scroll down to reinstall packages, and that will get you to CWM recovery
Ok first, Rom Manager should not be used until Koush incorporates our device in it.
Your findings are correct, the vol+,vol-, + the power button should get you into recovery, besides that the only other way is to use an app/power menu mod but that requires the phone to be on.
It sounds like the next thing for you is Odin. From your phones current state you can, hold vol+, vol- and then plug USB Cable into phone (Brings you into download mode), ive read some users pull battery and put it back in, but the first way i explained it should get you into download mode. From there, choose Roms KB5, KC1, or KD1, and yes your device will be factory reset. Your documents should be on your SD. I dont know if you have Titanium Backup to restore your apps, if not, you will have to manually install them after your odin session.
hope this helps
E:signature verification failed
chris.... said:
also when you get to the recovery menu it should be blue. scroll down to reinstall packages, and that will get you to CWM recovery
Click to expand...
Click to collapse
When I boot into recovery mode and select reinstall packages it starts out:
install from SD card
Finding update package
Opening update package
verifying update package...
E:signature verification failed
installation aborted
I have downloaded krylon360's cwm final update.zip and put it in my root directory.
The only posibility I can think of was a friend rooted my phone with an older update.zip file and i am trying to put the new one on. I deleted the old update.zip and copied over the new one.
i then downloaded odin and followed the instructions on a post to flash my rom with the t959+root from krylon360 as well. I believe that worked, because a lot of the apps that came with the phone are back now.
i tried reinstalling packages after this and still the verification error.
i have been doing a lot of browsing, searching and reading tons of posts on here... cant seem to figure this one out. any ideas?
Thanks
If you successfully flashed your phone and have root access, double check the update.zip is in the root and make sure its the latest one. Another thing is to make sure you copied over the Recovery file and pushed (Copied) it over to System/bin folder. Once you have those two in place you can reboot into stock recovery then "re-install packages" to get to CWM Recovery.
Hooray!
I did the ODIN thing, according to the post mentioned in my OP, and it fixed everything My custom shutdown vid, startup/shutdown sounds were gone, but my apps were still there, even paid apps. No titanium backup.... guess I got lucky lol. Scared the crap outta me when it wouldn't load past the T-Mobile startup image.
I knew not to use CWM yet, was following the thread about imminent implementation of sgs4g support for CWM, but just didn't really think that booting into recovery mode from CWM would get me stuck like that. Didn't even try to install recovery for CWM, knowing that "Epic 4G" and "Vibrant", etc were not the right choice despite the seeming similarities.
I had been keeping up with moving all apps i could to SD, so maybe that saved me, I dunno.
Followed pixelbrains post to use odin and worked perfect. Thank you all!!
glad you got your phone back. \m/
fknfocused said:
If you successfully flashed your phone and have root access, double check the update.zip is in the root and make sure its the latest one. Another thing is to make sure you copied over the Recovery file and pushed (Copied) it over to System/bin folder. Once you have those two in place you can reboot into stock recovery then "re-install packages" to get to CWM Recovery.
Click to expand...
Click to collapse
Thank you for that info.... I actually finally figured it out, but it took me forever. the key kind of is what i thought, that i did not have the recovery file in the right spot. I finally found a free file manager, super manager (recommonded on one of theses posts, i read so many cant remember which one ) after fiddiling with that for like 30-40 mins i finally figured the correct procedure to allow me to paste that recovery file and once i did that, bam, cwm recovery worked fine.
so, the fact that i am able to get to that screen and the latest update.zip file is in my external sd cards root dir. i am all goo there right?
i also used odin to flash "PDA_KD1.tar.md5" my phone after i got that recovery file in the correct place, and then when that was done i booted into the cwm recovery after i downloaded "Bali_SGS4G_v1.4UV.zip" and then i hit install zip from SD card, and i selected choose zip file and selected that bali one, and then i had to scroll down like 7 spots to hit yes to install and it went for a few seconds and then acted like it was done, so i just hit back and then reboot. how do i know if that worked? cuz i dont see anything saying bali at all on my phone...
does it sound like i did that right?
thanks again
edge228 said:
Thank you for that info.... I actually finally figured it out, but it took me forever. the key kind of is what i thought, that i did not have the recovery file in the right spot. I finally found a free file manager, super manager (recommonded on one of theses posts, i read so many cant remember which one ) after fiddiling with that for like 30-40 mins i finally figured the correct procedure to allow me to paste that recovery file and once i did that, bam, cwm recovery worked fine.
so, the fact that i am able to get to that screen and the latest update.zip file is in my external sd cards root dir. i am all goo there right?
i also used odin to flash "PDA_KD1.tar.md5" my phone after i got that recovery file in the correct place, and then when that was done i booted into the cwm recovery after i downloaded "Bali_SGS4G_v1.4UV.zip" and then i hit install zip from SD card, and i selected choose zip file and selected that bali one, and then i had to scroll down like 7 spots to hit yes to install and it went for a few seconds and then acted like it was done, so i just hit back and then reboot. how do i know if that worked? cuz i dont see anything saying bali at all on my phone...
does it sound like i did that right?
thanks again
Click to expand...
Click to collapse
settings menu then go to about phone and check the kernel
Sent from my SGH-T959V using XDA Premium App
thank you, it shows the bali as kernel... so glad to see i did it correctly
How do I revert back after one-click root to the stock everything including radio, rom, build, etc. I am currently running Cynagon mod RC1 7 and have had numerous issues, I would just like a clean, simple cut answer so I can give this to someone for the holidays, any help would be mightly appreciated, as i've asked this in the past and can never seem to get a clear cut answer, thanks.
wierd165 said:
How do I revert back after one-click root to the stock everything including radio, rom, build, etc. I am currently running Cynagon mod RC1 7 and have had numerous issues, I would just like a clean, simple cut answer so I can give this to someone for the holidays, any help would be mightly appreciated, as i've asked this in the past and can never seem to get a clear cut answer, thanks.
Click to expand...
Click to collapse
Just flash a full rom, it should restore the radio, the recovery, and the OS. Then do a reset to factory defaults if you are paranoid.
Get the proper rom for you phone here:
http://forum.xda-developers.com/showthread.php?t=1063664
If you're on T-Mobile, you have an i9020-T, this should work for you. It is the full 2.3.6 image.
http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip
Is this also working if you're coming from stock unrooted ICS 4.0.3 ?
And
Is there any risk of loosing IMEI if you're going full ROM ?
mahanddeem said:
Is this also working if you're coming from stock unrooted ICS 4.0.3 ?
And
Is there any risk of loosing IMEI if you're going full ROM ?
Click to expand...
Click to collapse
I have reverted back from 4.0.3 yesterday by reflashing the full 2.3.6 rom without any issues. I'm not sure I understand what you mean by losing IMEI.
My phone works just fine after doing this (more than once!).
pcbroch said:
Just flash a full rom, it should restore the radio, the recovery, and the OS. Then do a reset to factory defaults if you are paranoid.
Get the proper rom for you phone here:
http://forum.xda-developers.com/showthread.php?t=1063664
If you're on T-Mobile, you have an i9020-T, this should work for you. It is the full 2.3.6 image.
http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip
Click to expand...
Click to collapse
Ok here's my problem i did the ics update earlier before you told me this and still having issues, now when I go to recovery I get a android with his chest open with a red caution sign on it...how could I just format everything, essentially make it the way it was out of box so I could start over...because of all the issues I'm currently having.
When you get to that point, you need to hold down power then press vol up. Then you will be able to flash the zip. You need to put the zip on the phone first though, unless you have CWM recovery, in which case you can mount the sdcard section and move it across then, and flash it after.
OK thanks...Just please let's summarize this
1.You were on I9020T bone stock , unrooted
2.You had GB 2.3.6
3.You updated manually (or OTA) to 4.0.3
4.You decided to revert to GB 2.3.6
5.You used exactly the same method of manual update (stock recovery after copying the .zip file and in this case the full ROM of 2.3.6 to SD)
6.You followed the stock recovery steps and chose the .zip 2.3.6..
7.After everything was setup , you booted into GB 2.3.6 without any problems
Is that right ? or better if you make the exact detailed steps you did to revert to GB 2.3.6 would be apreciated
Thanks
furiannn said:
When you get to that point, you need to hold down power then press vol up. Then you will be able to flash the zip. You need to put the zip on the phone first though, unless you have CWM recovery, in which case you can mount the sdcard section and move it across then, and flash it after.
Click to expand...
Click to collapse
Tried, but then I get this error:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: !less_than_int(1316544229. getprop("ro.build.date.utc"))
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Any help?
I think u need a custom recovery to be able to revert back to gingerbread
Sent from my Nexus S using XDA App
Raver27 said:
I think u need a custom recovery to be able to revert back to gingerbread
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
how would I go about flashing the custom recovery? I tried to flash another full rom package with the recovery in it and like i said i got that error...
Do you have a folder in windows where you have been flashing stuff from, using fastboot?
If so, just get this recovery image http://forum.xda-developers.com/showthread.php?t=988686
Download either the blue or green 5023 image. Doesnt matter which just changes colour of mod place the file in the same folder as the fastboot.
Next, with the phone off and after attaching the phone to USB, turn it on while pressing vol-up and power. You should see the boot option screen, the fastboot screen. Leave the phone there.
Now go back to cmd window in windows, and browse to the folder where you have all the fastboot files and where you have put the above image file. Then type in the following:
fastboot flash recovery <image name.img> (without the < >)
press enter and it'll flash the recovery and then you can install the old version of android
furiannn said:
Do you have a folder in windows where you have been flashing stuff from, using fastboot?
If so, just get this recovery image http://forum.xda-developers.com/showthread.php?t=988686
Download either the blue or green 5023 image. Doesnt matter which just changes colour of mod place the file in the same folder as the fastboot.
Next, with the phone off and after attaching the phone to USB, turn it on while pressing vol-up and power. You should see the boot option screen, the fastboot screen. Leave the phone there.
Now go back to cmd window in windows, and browse to the folder where you have all the fastboot files and where you have put the above image file. Then type in the following:
fastboot flash recovery <image name.img> (without the < >)
press enter and it'll flash the recovery and then you can install the old version of android
Click to expand...
Click to collapse
I don't believe I have a folder as such, being a person who is not familiar with the lingo, etc of all this i rooted it with one-click mod, and just flash things through this, are you saying I can flash things externally? sorry to sound like a bum, but i'm trying to understand thanks.
No problem, we're all noobs once, hell i still am and only just coming to terms with it all! Just need to do a bit of researching, but heres the basics...
fastboot lets you flash stuff to the phone from windows, when the phone is attached to the USB and is in fastboot mode (just turned on, from vol-up/pwr).
Can unlock the boot loader and flash recovery images from there. Once thats done, most other stuff can be done from within the new recovery mode, clockworkmod being the one that everyone uses.
over at nexusshacks it's explained really well how to root your phone. And he provides a zip with everything you could want. That zip is the folder I was talking about in the last post. It comes with drivers to install when you first plug the USB in and the PC recognises the phone. Download the pack, install them drivers and then go back to my last post and take it from there
http://downloadandroidrom.com/file/NexusS/rooting/nexussrootnew.zip
EDIT: Also do a full wipe/data reset just before you flash the new rom
furiannn said:
No problem, we're all noobs once, hell i still am and only just coming to terms with it all! Just need to do a bit of researching, but heres the basics...
fastboot lets you flash stuff to the phone from windows, when the phone is attached to the USB and is in fastboot mode (just turned on, from vol-up/pwr).
Can unlock the boot loader and flash recovery images from there. Once thats done, most other stuff can be done from within the new recovery mode, clockworkmod being the one that everyone uses.
over at nexusshacks it's explained really well how to root your phone. And he provides a zip with everything you could want. That zip is the folder I was talking about in the last post. It comes with drivers to install when you first plug the USB in and the PC recognises the phone. Download the pack, install them drivers and then go back to my last post and take it from there
http://downloadandroidrom.com/file/NexusS/rooting/nexussrootnew.zip
EDIT: Also do a full wipe/data reset just before you flash the new rom
Click to expand...
Click to collapse
I'm using clockwork right now, but it seems to be corrupted, im running 4.0.3 right now on a full rom package, so your saying I should still do this? I think i may have done all that before, as the phone is rooted, but I used the one-click method instead.
Just download that file and then you'll have what you need on your pc to do what i mentioned above. Plug the phone in and reflash the new recovery which will not harm it, and then you'll be able to stick gingerbread or ICS back on. You gotta try things out otherwise you'll not understand what is going on. I dont know of any one click thing that will let you go back to default as it was before. After it flashes the new recovery, scroll down to "recovery" on the screen and press the power button, dont restart the system.
In hindsight, while the one click methods are easy to use, theyre getting used by people that dont do the necessary research to learn about the rooting and flashing process. This means you end up skipping so much that you learn about the whole rooting and flashing proocess when doing it manually, which in turn means you have more trouble getting out of it if you want it back to the way it was! No offence intended here, but you just need to man up and do it! All will be well