Related
I'm trying to perm root my mytouch 4g using Visionary
I have android 2.2.1 and have successfully temp rooted using Visionary
I download the root folder from HERE
I put them in the root of the SD card and open up Terminal Emulator and type in
su
cd /sdcard/root
sh root.sh
when I type the first line (su) I get the # and am told that Terminal Emulator has been granted superuser permissions.
when I type in the second line (cd /sdcard/root) I get this message
cd: can't cd to /sdcard/root
What could be causing this?
Thanks
Jonathan
The "cd" command is a "change directory" command, and there is no directory called "root" on your SD card, because either you haven't unzipped what you downloaded, or you unzipped it in the wrong place.
Unzipping what you downloaded creates a directory (or a "folder", if you're a Windows user) called "root" that has several files in it -- a kernel module and a script, if I remember correctly. The script loads the kernel module and makes a call to it in order to set S Off.
thank you much, I think I figured out the problem. I'll try again later and see what happens. I'll post back with the results later. Thanks again!
Jonathan
NOTE: Ok, I can now run through the
su
cd /sdcard/root
sh root.sh
commands but when it's done and I check for s-off I don't have it (I still have s-on)
I've tried this twice to no avail. any advise?
i am having the same problem. i've tried this method about 15 times, mostly with visionary r14, but also a couple times with r11. i have also tried the gfree method a couple times as well via the semi-automated method. no s=off!
i have a new MT4G direct from phone upgrade order. i've read of others who have rooted the MT4G before multiple times, but can't do it now with a new phone. i'm wondering if it's something HTC has changed with the newest releases.....
kenrippy said:
i am having the same problem. i've tried this method about 15 times, mostly with visionary r14, but also a couple times with r11. i have also tried the gfree method a couple times as well via the semi-automated method. no s=off!
i have a new MT4G direct from phone upgrade order. i've read of others who have rooted the MT4G before multiple times, but can't do it now with a new phone. i'm wondering if it's something HTC has changed with the newest releases.....
Click to expand...
Click to collapse
HTC was going to install a measure that would prevent "rage methods" from working on their phones. How ever, none of the tech blogs are reporting that this has been rolled out. So i doubt that is the case.
make sure the its set up as sdcard/root. If you've just extracted the folder and copied the extraction to the sdcard it's not set properly.
neidlinger said:
HTC was going to install a measure that would prevent "rage methods" from working on their phones. How ever, none of the tech blogs are reporting that this has been rolled out. So i doubt that is the case.
make sure the its set up as sdcard/root. If you've just extracted the folder and copied the extraction to the sdcard it's not set properly.
Click to expand...
Click to collapse
yes, i understand the root folder in the root of the sdcard, and not 2 root folders. (sdcard/root/root)
like i mentioned, i read posts from a couple people on here with the same problems with new mt4g's after having done it multiple times before with success.
kenrippy said:
yes, i understand the root folder in the root of the sdcard, and not 2 root folders. (sdcard/root/root)
like i mentioned, i read posts from a couple people on here with the same problems with new mt4g's after having done it multiple times before with success.
Click to expand...
Click to collapse
then set up the ADB (see my sig) and do it the long way.
neidlinger said:
then set up the ADB (see my sig) and do it the long way.
Click to expand...
Click to collapse
after doing that, would i start on #4 in this guide?
http://forum.xda-developers.com/showthread.php?t=858996
kenrippy said:
after doing that, would i start on #4 in this guide?
http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
nope you would start @ number 1.
you need to download those files and check the MD5SUM of every download load. the files need to be PERFECT for it to work correctly.
and i cannot stress enough. take your time and read directions. Read through the list a few times and make sure you have a good understanding of what you are doing. Doing that wrong can make your phone an expensive paper weight.
instead of pushing stuff to the "SDK tools folder" you store it to the ADB folder TrueBlue had you create in his walkthrough. And make sure to change your target folder to "c:\adb".
and remember you are choosing to do this. so if you screw it up. it's on your shoulders not mine.
neidlinger said:
nope you would start @ number 1.
you need to download those files and check the MD5SUM of every download load. the files need to be PERFECT for it to work correctly.
and i cannot stress enough. take your time and read directions. Read through the list a few times and make sure you have a good understanding of what you are doing. Doing that wrong can make your phone an expensive paper weight.
instead of pushing stuff to the "SDK tools folder" you store it to the ADB folder TrueBlue had you create in his walkthrough. And make sure to change your target folder to "c:\adb".
and remember you are choosing to do this. so if you screw it up. it's on your shoulders not mine.
Click to expand...
Click to collapse
thanks for all the help/info. i'll hold off for a while to see what else unfolds in the coming weeks in regards to alternate root methods. i don't want to brick this thing, just to get it rooted.
kenrippy said:
thanks for all the help/info. i'll hold off for a while to see what else unfolds in the coming weeks in regards to alternate root methods. i don't want to brick this thing, just to get it rooted.
Click to expand...
Click to collapse
The way this phone is made it's going to be pretty difficult to write a "one click s=off" program.
If you are wanting the benefits of being rooted you can always use VISIONary.apk when you need the root features like AD-HOC tethering or Screen Shots.
neidlinger said:
The way this phone is made it's going to be pretty difficult to write a "one click s=off" program.
If you are wanting the benefits of being rooted you can always use VISIONary.apk when you need the root features like AD-HOC tethering or Screen Shots.
Click to expand...
Click to collapse
what i'd really like to do is remove some bloatware and demo games. (not just hide them) any way to do that aside from perm root?
kenrippy said:
what i'd really like to do is remove some bloatware and demo games. (not just hide them) any way to do that aside from perm root?
Click to expand...
Click to collapse
not really. As soon as you reboot they'll pop right back up.
ok thanks.
Two things.
1. I've decided to put off perm rooting until I can understand adb and use it properly. No need to rush, I've got time.
2. Is it true that given time, effort, and ingenuity there really isn't such a thing as a bricked phone? It can always be recovered, it's just a question of how far you have to go to do it?
I've read around a lot and though I've heard many people talk of bricking their phone, it seems like many say that if you can use things like adb commands you can pretty well fix any issue, it's just difficult.
Like I was saying in point 1, I'm newer to all this and I'm learning so thanks for answering!
Jonathan
lanternslight456 said:
2. Is it true that given time, effort, and ingenuity there really isn't such a thing as a bricked phone? It can always be recovered, it's just a question of how far you have to go to do it?
Click to expand...
Click to collapse
At minimum, I believe the phone requires a functioning bootloader in order to be able to connect via USB to fastboot.
Any update on this? I also just got a mytouch 4g yesterday and am trying to root it. Is it possible right now?
Root the mt4g
Friend, I used the adb method here on xda, after I got the forked childs msg, and restart terminal w/e, make sue to pull out battery. Restart, the LAST THING I DID WAS USE VISIONARY r14, to attempt permroot, took me a week before I figured out to try this, the guide said phone would be rooted after terminal commands went through. So, to recap if u entered everything correctly, (my avg protection was telling me my phone was rooted for a week after I pushed gfree using the adb method but had no s-off, tried visionary permroot, BINGO!) THANKS TO ALL THE HARD WORK/GUIDES ON XDA, using ICE GLACIER ROM, titanium backup, rom manager, root explorer, my internet security (ad free web) set cpu, cache cleaner ng, drocap, couldn't get barnacle to work, the tethering on board works fine. Quadrant standard for benchmarking.
My wifes mt4g arrived today, and I had it perm rooted, with s-off in about 20 minutes, following this guide from the wiki:
http://forum.xda-developers.com/showthread.php?t=858996
Sent from my Nexus One using XDA App
danger-rat said:
My wifes mt4g arrived today, and I had it perm rooted, with s-off in about 20 minutes, following this guide from the wiki:
http://forum.xda-developers.com/showthread.php?t=858996
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
dude this method is great especially if your a noob or cant use adb for whatever reason just use visionary for temp root and then using root explorer move the gfree file to data>local then open terminal emulator and follow the instructions that gives you s-off and allows you to use visionary to permaroot when you reboot and then rommanager it now supports 3.xx so you can flash gingerroms just be careful and have fun
I wanted to learn the manual ADB method suggested by JCASE in the developemen forum, however i've had trouble understanding, seting up, & using ADB.
I have rooted two two htc eris phones before with JCASE's simple one click root method, so that doesn't realy count. I also roote my Moto Droid, but that was a file that was downloadable by the phone it's self, so that was pretty simple also.
The thunderbolt root seems a little more complicated for my knowledge level, so I've decided to go about it using a youtube tutorial called How To: Root A HTC Thunderbolt ( Easiest Tutorial / Step by step .
this method envolves a program called TB-Auto-Root. I attempted to download it to the PC using slow DSL connection, but it said expected download time is over 8 hours. I followed the same link to my phone and it is at 12% in less than 30min. Can't i Just download it it my phone then copy it to my pc? If so, do I need to copy it directly to the C\ drive, or does it matter?
Thanks in advance, ~Dave
Sub-Standard said:
I wanted to learn the manual ADB method suggested by JCASE in the developemen forum, however i've had trouble understanding, seting up, & using ADB.
I have rooted two two htc eris phones before with JCASE's simple one click root method, so that doesn't realy count. I also roote my Moto Droid, but that was a file that was downloadable by the phone it's self, so that was pretty simple also.
The thunderbolt root seems a little more complicated for my knowledge level, so I've decided to go about it using a youtube tutorial called How To: Root A HTC Thunderbolt ( Easiest Tutorial / Step by step .
this method envolves a program called TB-Auto-Root. I attempted to download it to the PC using slow DSL connection, but it said expected download time is over 8 hours. I followed the same link to my phone and it is at 12% in less than 30min. Can't i Just download it it my phone then copy it to my pc? If so, do I need to copy it directly to the C\ drive, or does it matter?
Thanks in advance, ~Dave
Click to expand...
Click to collapse
First of all, don't use easy roots. If you insist on it, then yes you can download on your phone then transfer it to the PC. Check the MD5 to ensure the file is good. As far as where to put it, I am sure the tutorial should tell you.
Sent from my ADR6400L using XDA Premium App
You should YouTube a video called "thunderbolt adb setup" or something. Set up the Google driver, fix the config file so it works with the thunderbolt (google adb thunderbolt and its one of the first links). The rooting software shouldn't take that long to download, even on slow dsl...
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
And follow the root guide stickied in the forum
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
admiralspark said:
And follow the root guide stickied in the forum
sent from my rooted Thunderbolt with das BAMF 3.0 rc4
Click to expand...
Click to collapse
Wish people would read before responding
on auto root when i get to the step of pressig 1 it responds that "ADB is not a vlid internal or external......" what does adb have to do with auto root? please help me root my device.... thanx for every ones help, ~Dave
I replied to the other thread but if you insist on using the auto root I can only say this:
The auto root script does EXACTLY what is described in JCase's root sticky. It just automates the process so less user interaction is required. (i.e. It types in the commands for you) That is what it has to do with adb.
Sent from my HTC Thunderbolt
JBO1018 said:
I replied to the other thread but if you insist on using the auto root I can only say this:
The auto root script does EXACTLY what is described in JCase's root sticky. It just automates the process so less user interaction is required. (i.e. It types in the commands for you) That is what it has to do with adb.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
it might...but automation is prone to unforeseen errors, which is why no one recommends it
yareally said:
it might...but automation is prone to unforeseen errors, which is why no one recommends it
Click to expand...
Click to collapse
Which is the reason the only advice I had was to tell him what the auto root has to do with adb.
Sent from my HTC Thunderbolt
yareally said:
it might...but automation is prone to unforeseen errors, which is why no one recommends it
Click to expand...
Click to collapse
Exactly. I did the rooting (and eventually unrooting) manually by simply copying and pasting the commands from the tutorial jcase wrote up into ADB. Process of rooting took me roughly I'd say 25 minutes but honestly its not that hard. Just follow the steps and you'll be just fine.
Oh and unrooting took me all of four minutes to do lol.
Search YouTube for "HTC Thunderbolt root". Find the tutorial by Nat3Mil, explains step by step starting with how to set up adb all the way to installing the custom recovery image. Don't get overwhelmed just take your time. Probably takes about 45 minutes give or take. He did a handful of videos including flashing roms, radios, and kernels. See you on the other side my friend...
how are we to know what is wrong when you are using a tutorial posted on youtube as your guide?
Most of us used jcase tutorial to root. Really, it is very simple to do. You probably don't have the files in the right spot on your pc, or you don't have adb in the right spot.
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
http://www.htc.com/www/SupportDownload.aspx?p_id=312&cat=3&dl_id=1073
Sent from my ThunderBolt using XDA App
oxidant11 said:
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
http://www.htc.com/www/SupportDownload.aspx?p_id=312&cat=3&dl_id=1073
Sent from my ThunderBolt using XDA App
Click to expand...
Click to collapse
They're not bashing the guy.. you're a prick for saying that. OP, if you look in the Thunderbolt help and info thread in the Dev section, there is a llink to a thread that has an ADB auto installer and set up guide
Sent from my ThunderBolt using XDA Premium App
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
ScoobarSTI said:
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
That might be the case with your pc, but usb port has never mattered on my desktop pc, laptop or from within a virtual machine. Perhaps if you attach to some sort of weird device usb like a monitor's usb ports it might.
I would advice the OP to read the tutorial in the development section that's stickied and as a fallback for more information, find a youtube video that explains the same process. I don't know of any links offhand, but I'm sure a 2minute search or less will make a couple show up that do basically what you see in the tutorial sticky thread. However, I would not use the youtube videos alone.
ScoobarSTI said:
Dont know if you know this but you have use the rear usb ports on the pc or the program doesnt read it also need the htc sync drivers
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Not true on my PC. Sounds like your front ones are messed up. In response to the OP simply watch a youtube video. You are really going to want to learn ADB instead of using one of the auto-rooters. You will still need an ADB connection either way as it is just automated.
oxidant11 said:
Wow ok aside from the pricks that are not helping...make sure your phone is in charge only, debug is checked, and make sure you have the HTC drivers installed on your PC, if you downloaded the file onto your phone I'm assuming you didn't install the drivers and that what's probably wrong. Here's the link if ya need it, also make sure you haven't done the latest update if you did its not going to work.
Click to expand...
Click to collapse
Nobody was trying to be a jerk, but there are 19 different auto root scripts that all have a pretty high possibility of failing at a random point. Leaving you with no clue which step things went wrong at. This makes it really hard to offer any help aside from telling them it is a much better idea to do it the "long" way.
So OP I apologize if you took what I said as being rude. It was not my intention. I was trying to answer what I could without giving bad advice about the problem with the auto script.
Sent from my HTC Thunderbolt
I agree with most everyone else's answers. Don't be afraid to follow the standard method jcase laid out. It's not hard, there's little margin for error so long as you follow the instructions, and it never hurts to learn a little adb knowledge. I came from a DINC, and I never used adb before (I rooted the DINC with unrevoked). It's simple. Getting the proper drivers installed is probably the hardest part for someone not experienced in this department, but even so, still really simple.
I'd avoid the 1 click root's. Like mentioned previously, basically all they are is a batch script that runs the same exact commands you'd be copying and pasting yourself if you followed the jcase tutorial. Given that, there's margin for error as you have no control over it unless you modify the script yourself. You're much better off to listen to most people's advice here and just follow the jcase method.
cstrife999 said:
Not true on my PC. Sounds like your front ones are messed up. In response to the OP simply watch a youtube video. You are really going to want to learn ADB instead of using one of the auto-rooters. You will still need an ADB connection either way as it is just automated.
Click to expand...
Click to collapse
yareally said:
That might be the case with your pc, but usb port has never mattered on my desktop pc, laptop or from within a virtual machine. Perhaps if you attach to some sort of weird device usb like a monitor's usb ports it might.
I would advice the OP to read the tutorial in the development section that's stickied and as a fallback for more information, find a youtube video that explains the same process. I don't know of any links offhand, but I'm sure a 2minute search or less will make a couple show up that do basically what you see in the tutorial sticky thread. However, I would not use the youtube videos alone.
Click to expand...
Click to collapse
No with that program it needs to be the rear usb ports i dont know why its that way but thats how it is. Research it. All my usb ports are in perfect working condition. But for what ever reason you will get that error if you use the front ports.
Sent from my ThunderBolt using XDA Premium App
Sent from my ThunderBolt using XDA Premium App
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
Android adb http://developer.android.com/guide/developing/tools/adb.html
which is in the sdk http://developer.android.com/sdk/index.html
You dont really need to know what the other tools are listed do, you just need to do what it says with them and the tools are linked in the thread you're reading to download I assume. If they aren't, then read through the manual method that is stickied in the developer's forum. A link for the tools (misc.img, busybox, and psnueter) can be found there.
I was a little nervous at first myself. I read over the directions several times and then found some information on how to get adb installed and working. Once I got that step understood the actual rooting process was super easy. You can cut and paste all the commands to ensure you don't typo. Just make sure to validate your checksums to save any potential headaches. My first attempt at it took about 20 minutes and I had absolutely ZERO issues.
It is well worth your time and effort. It is also far better to use this method than the easy root 1 steps as you will gain a slightly better understanding of how your phone works and what steps you can take when you inevitably mess something up flashing ROMS, mods and radios
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
There are also videos on YouTube showing JCases method and adb setup. I would link but I'm on my phone but it shouldn't be to hard to find.
Sent from my ADR6400L using XDA App
priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
reading through this might help http://forum.xda-developers.com/showthread.php?t=1143188
There is no "easy", reliable way to root sans ADB and command lines. You will need to know this stuff before you try to root. You're going to need ADB in any event. If learning it isn't knowledge you desire, you shouldn't root your phone. For terms, you should refer to the dictionary stickied at the top of the forum. The best way to learn is to get the Android SDK, set it up, make sure your drivers are there, then play with ADB. Do simply stuff like check your serial number, the md5 of files on your SDcard, and harmless stuff like that. If you've got any questions along the way, feel free to PM me any time. I'm here often. And I'm usually faster than hunting through forums or the internet.
priapos said:
Greetings,
I am looking for an easy to understand method of root.
I have read the new user thread. I am afraid with this so called "easy" method for beginners, there is a lot of jargon used that I simply don't understand.
For example in the thread for easy root, I am lost at step #2 where I am instructed to:
"Note that adb is required.
Push misc.img, busybox, and psnueter using the following commands:"
I don't know what adb is let alone how to push misc.img, busybox and psnueter.
Can someone please point me to the instructions for absolute morons to this process like me.
Thanks in advance.
Click to expand...
Click to collapse
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
I would not recommend "easy" root methods, since there is greater room for error. Understanding ADB will help you in the long run
MeAt.HoOk said:
From what i think if u dont want the adb command line ****s you should try the software named "z4root". It automatically roots your phone.
Worked for me. And i think itz the easiest method available.
After installing the apk.
Open the application, click PERMANENT ROOT,
Then dnt let your phone sleep or lock itself, wait for about 10 minutes,
After the process reboot ypur phone.
Voila, you are rooted ..
Am new to the forums. please guide me..
Thanks and sorry for my poor english. Hope you like this.
Cheers!
__________________________________________________________
MODEL : LG Optimus GT540 (Rooted)
MOD : SwiftDroid v2.0 M6 (Based on CyanogenMod v7.1 RC0)
KERNEL : 2.6.29 (VirtualBox #309)
BUILD : GRJ22
RECOVERY : ClockworkMod Recovery v4.0
___________________________________________________________
BusyBox v1.19
SuperUser v2.3
SetCPU v2.2
Click to expand...
Click to collapse
Don't think z4root works on the Thunderbolt just search youtube for Thunderbolt root and watch the tutorials. Links are provided for everything that needs to be downloaded.
Sent from my ADR6400L using XDA Premium App
I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.
loonatik78 said:
I know z4root doesn't work for any modern HTC. You can have permanent root without s-off. The only way to do that is through ADB, using an engineering hboot, and applying various exploits. All the "easy" root methods are just scripts that do what jcase's guide lays out. And unlike the guide, if something goes south, you're lost and screwed. I think it would be safe to say "easy" roots have probably bricked more phones than anything else.
Click to expand...
Click to collapse
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App
nerogold said:
Is that u dbzfanatic? Looks awfully similar, lol.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.
loonatik78 said:
Nope. Just a pieced up, inked up, "I been everywhere, man", freak of many talents and interests. Android phones are just one of them.
Click to expand...
Click to collapse
Sorry man I just wanted to say thanks to the other user I mentioned ,his method of rooting was and still is a great help to me already rooted 5 bolts and currently on #6 as I'm typing.
Sent from my ADR6400L using XDA Premium App
Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.
Greywolf66 said:
Do a google search for thunderbolt auto root. There is one posted in the Thuderbolt forums. I can't link directly to it because I don't have enough posts yet. I tested it on my wife's thunderbolt without a problem.
Click to expand...
Click to collapse
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.
Ive used the one click root four times with no issues. Four diffrent tb's from 3 diffrent states. 2 of them had alrdy takin the ota's. Dont have the link handy but if was a time saver. Though a half arse understanding of the method helps avoid issues. Ill post the link when i get home.
Sent from my ADR6400L using XDA Premium App
loonatik78 said:
Yep, and the past guy to go that route, after being warned it was highly prone to failure, had it fail. Then he came back looking for help, but nobody could because what went wrong wasn't at all clear. Just not wise.
Click to expand...
Click to collapse
I rooted mine manually first. As you said in a previous post most "easy" roots are just scripts. That's what the one I used on my wife's was. I was following along the text of the batch file as I was running it so that if something happened I would know at what part of the script I was at. I had no problems with it though.
I'll agree that I could see where if someone where to run into a problem using script without any knowledge of what the script was doing they would probably end in a very bad place.
I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.
TabGuy said:
I think the obvious was missed in this thread: The OP is not a candidate for rooting. It's a risky task for experienced users and a non-task for noobs. He hasn't even stated a valid need for rooting the phone.
Click to expand...
Click to collapse
Come on, cut him some slack. Everyone was new once. He has already been warned.
Sent from my ADR6400L using XDA App
priapos said:
Thanks for the quick reply.
I am not nervous, I just don't understand what any of this is.
I don't know what adb is or how to use it.
I don't know what copy and pasting the commands means.
I certainly don't know what "validate checksums" are.
I realize I am coming across as a comlete shmo, but explaining how to do this with more computer jargon doesn't clarify the process.
I really need instructions for dooshbags like me.
Thanks in advance.
Click to expand...
Click to collapse
ADB "Android Development Bridge" Simply put just helps you develop apps and fix bugs. (In this case, you will use this to reinstall Android without a locked bootloader (a.k.a. S-Off) (the bootloader is code that is run when you first turn on your device that tells Android to run).
You don't have to know how to use ADB, but you must install it on your computer.
As far as copying and pasting commands go, the tutorial that you choose to visit will tell you to type this command ex: cp image.zip/sdcard/
You will just copy this code out of your browser (FireFox/Internet Explorer/Chrome/etc.) and paste it into a command line.
Your command line will depend on what operating system you use on your pc. Ex for Windows, you will use "Command Prompt" or on Linux/MAC you will use "Terminal".
As far as validation checksums goes, it is used to make sure that the file that you downloaded is 100% the same file that the developer made.
Basically, open up your command line and type (without quotes) "md5 image.zip" also, make sure you change to "image.zip" with whatever/where you file is at.
I would be more specific with these instructions I'd I knew what OS (operating system) you are using on your computer is.
After you type in the command and hit enter, it will spit out a long string of gibberish. Just make sure this "checksum" is the EXACT same as whatever the devolver put in the tutorial you are following.
As far as putting together an idiot proof guide, you will have to forgive us, but I don't think the people here want to have a bunch of people here flooding the forums with very basic questions that have been answered already on the internet. However, don't let that stop you from asking questions. Just make sure you help yourself first (Google what you don't understand) and then ask for clarification.
P.S. I claim touchscreen amnesty for any typos.
Sent from my ADR6400L using XDA App
Im trying to get someone to help walkme through the rooting process of a motoactv watch that I received for christmas. The device was recently rooted, and it appears that the process is fairely easy. I have limited rooting experience with android phones, and have jailbroken a few iphones, but have never had to mess with command lines, or adb. If someone is willing to walkme through the process on here I will be more than willing to make a modest paypal donation to them (we can discuss payment terms.)
I have posted the link website below for the rooting procedure. Also note that I am only interested in doing this as long as the core fitness apps and capabilities of the device arent completly destroyed, as this was a gift from my girlfriend and it needs to function in a fitness capacity. Im thinking that they shouldnt be affected, and that I probably will only gain the ability to delete them, but I could be wrong. I am also trying to learn from this expereince and am willing to pay if necessary to do so. Thanks so much, and hope everyone has a happy new year.
http://www.cmw.me/?q=node/55
I have one on order. I thought the process was pretty straightforward. It is easier on a Mac or Linux as there are scripts that use zergrush already available. If you are unfamiliar with using the command line I would recommend finding someone else to root it for you.
I am rooting mine for Google music and adding watch faces but I am kind of tickled by the idea of watching NetFlix on a wristwatch.
Cheers,
-M
XDA member since 2007
Hi
I already rooted the MotoACTv that I have. But I am having problems installing the Google APPS zip file downloaded from the cynagoen web site. Can some one explain how to install this so I can get the Market up and running on the watch. I already installed other apps like pandora and they work. Only thing is that I installed this with adb install command and not the via the market. Would love to have the market working. Please help.
rdavidowski said:
Hi
I already rooted the MotoACTv that I have. But I am having problems installing the Google APPS zip file downloaded from the cynagoen web site. Can some one explain how to install this so I can get the Market up and running on the watch. I already installed other apps like pandora and they work. Only thing is that I installed this with adb install command and not the via the market. Would love to have the market working. Please help.
Click to expand...
Click to collapse
If you downloaded the gapps from cyanogenmod as you should have, you need to adb push everything that isn't an apk.
There are a few libraries that need to be installed. adb push filename /file/location/name is the way to do this. The locations match the unzipped folder names.
Cheers,
-M
XDA member since 2007
I also need step by step directions please, bricked my watch
I tried to follow the directions and I finally got the phone to root. Then when applying the new interface it must have not liked the commands I was trying to use.
Can anyone give step by step directions. It took me about 2 hours to figure out what applications I needed and how to use them so I am sure others would benefit from this.
The directions on that original post was way too vague for us noobs
Hardcore73 said:
I tried to follow the directions and I finally got the phone to root. Then when applying the new interface it must have not liked the commands I was trying to use.
Click to expand...
Click to collapse
Oh, no... Are you sure your watch is bricked? That really is awful... I thought mine was for a bit after I used Super One Click to root it, but I was able to recover it by holding Start + Power for 10-15 seconds then plugging it in.
It seems zergRush is safer -- I ended up with root after that, but a couple of others in the #motoactv channel on freenode tried it and ended up with the phone seemingly dead (though a start+power off like above fixed it) and without root.
I posted this in the other thread but I am impatient and figured it wouldn't hurt to ask here too so,
moonzbabysh said:
Okay so last night I attempted to root my motoactv but my adb for some reason say it cannot load the root.img, I had the same problem where it's couldn't load the recovery.img for my photon when attempting to apply CWM or twerp recovery. Fastboot devices definitely sees both my devices (no I didn't do them are same time, and the files needed are in the same file location as instructed) and I can even Fastboot reboot and have that work. Any ideas or suggestions?? Any help would be appreciated.
Click to expand...
Click to collapse
Your system.img is defunct. PM me or come in IRC and I'll send you the links for them and more.
Sent from my Galaxy Nexus using Tapatalk
MOTOACTV update without Windows
I'd like to root my MOTOACTV. My clock is running version 4.53.50. To root I had to update at least to version 4.55.78. I found the file delta-ota-Blur_Version.4.53.50-4.55.78.Motorola-F100.Retail.en.US.zip but I've no idea how to flash that to my clock without Windows.
Any ideas?
Thanks.
This is my first post here so please don't hit me if I am doing something wrong.
What it says on the tin. I've found lots of things about it freezing on step 7 but not step 2. I've followed the noob guide in this subforum to the T. What's going on?
Couldn't tell ya, I'm not a big fan of one clicks so I never have used them. If you would like made a quick guide on how to root without it
http://forum.xda-developers.com/showthread.php?p=40198560
Buried in this thread on like the third or so page you will find it, I've had to use this method to root countless times while I tinker with this phone, it may seem complicated but it works every time and takes me maybe 5 min from start to finish and works just fine in both windows and linux
Sent from my Nexus 7 using xda premium
demkantor said:
Couldn't tell ya, I'm not a big fan of one clicks so I never have used them. If you would like made a quick guide on how to root without it
http://forum.xda-developers.com/showthread.php?p=40198560
Buried in this thread on like the third or so page you will find it, I've had to use this method to root countless times while I tinker with this phone, it may seem complicated but it works every time and takes me maybe 5 min from start to finish and works just fine in both windows and linux
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thanks for the reply, I'm having a problem with your guide though. I get to step 7 where I have to use Heimdall but it says my phone is disconnected. I've tried reconnecting/using a different USB port to no effect.
Its probably a driver fault, but these steps (ones in red) are only if you need to restore to stock first, if you have a functioning os skip it (as the bottom of the post says, although not very clearly) if youre in download mode right now you may need to do a battery pull to get back to os, can't remember. but you can do these steps if you want. Won't hurt anything
Sent from my Nexus 7 using xda premium
Okay, I'm still having a problem though. When typing in the first line in the command prompt, it tells me adb is not a recognized internal or external command. I found that this is because I need the Android SDK which I downloaded, but it still doesn't work.
Worked around this by typing in the full path of adb.exe instead. Now Root Browser won't let me overwrite the recovery file in the system\bin folder
assuming windows, its nice to add the platform-tools into a path in enviromental variables, ill link you to a guide to do such as change directories all the time is a pain.
I use root explorer (paid app) but any root browser should work, just need to gived it read/write permissions.
Alternatively you can use a terminal emulator or adb to push the file in
Let me know if you have issues
Sent from my RubiX NonSense using xda app-developers app
http://forum.xda-developers.com/showthread.php?p=41374534