Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
put the phone in bootloader and tell me exactly what it says there.
jjb007 said:
Hey guys, I am trying to flash Dutty's newest rom, but im having some trouble...
When I double click the RUU.exe file, I put a check in the checkbox, hit continue. then put another check, hit continue, then I get an error saying:
"Error [200]: Invalid update tool"
"Please get newer update utility"
This is odd because I read on the Wikki that you get this error if you don't have HardSPL, but I do. In fact, I have flashed at least 4 or 5 different roms on this phone. Another thing is that my phone isnt in activesync mode, and for some reason when I try to install activesync (directly from microsoft's website and from the CD that came with my tilt) I get an error saying that it wont install... And another weird thing is that this never stopped it before, I have flashed a rom without it being in activesync with the computer...
When I tried to install Microsoft's activesync directly from their website, I double click the setup.msi file, and then it says :
"preparing installation..."
"The wizard was interrupted before Microsoft ActiveSync 4.5 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again.
Click Finish to exit the wizard"
And this happens every time I try it... I have tried redownloading the file and I get the same issue... I even checked to see if maybe I downloaded the wrong version (like the vista version or something) but I downloaded the correct one.
Now, when I try to install activesync from the CD that came with my Tilt, I get an error saying that I need to update my Adobe Flash Player, So i click on the link that it gives me, and I updated it. Even though it is currently up to date, I STILL get this error every time I try, even after restarting my computer.
Any ideas?
Click to expand...
Click to collapse
I can't help with the active sync problem (you don't have vista, do you?) but as for flashing...flash from the sd card http://forum.xda-developers.com/showthread.php?t=336158
P1Tater said:
put the phone in bootloader and tell me exactly what it says there.
Click to expand...
Click to collapse
excuse my noobness , but im not sure what that means
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
OK, with the phone powered on, press and hold the camera button and insert the stylus in the reset hole until the tri-colored screen comes up. This is bootloader. Tell me what it says there, exactly.
jjb007 said:
excuse my noobness , but im not sure what that means
Click to expand...
Click to collapse
After you put your phone in bootloader mode as P1 said, you will see something like this:
KAIS1*0
SPL-1.93.0000
CPLD-8
Once you make a record of what is displayed, reply back with it.
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
jjb007 said:
ok, this is what it says (in the top red box):
KAIS1* MFG
SPL-1.0.OliPof
CPLD-8
Then in the white box it says: "Serial"
Click to expand...
Click to collapse
Since you already have it in the boot loader just keep it there and try to flash it, see if you get any errors that way.
What version of Windows is on your computer?
If your running vista you need the mobile device center, not activesync.
Im using windows XP, I will try flashing while it is in bootloader, I edit my post once I see if it is successful or not.
**It did not work when I tried flashing from the bootloader screen, I got the same error
which rom are you flashing your device with?
I am trying to flash Dutty's newest ROM, and right now Dutty's 3rd or 4th newest one is on my phone.
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
XtreMe_G said:
after you put your device in bootloader, and connected it to the pc, did the word "serial" change to "usb"? and were drivers loaded for the device? there should be a htc usb sync or microsoft usb sync in your device manager
Click to expand...
Click to collapse
Yea, I dont see either of those in my device manager...
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
GSLEON3 said:
Sounds like you're missing the drivers. Need to roll 'em back to the XP drivers.
Click to expand...
Click to collapse
Alrighty... so how do I go about doing that?
jjb007 said:
Alrighty... so how do I go about doing that?
Click to expand...
Click to collapse
You use google or XDA search via google. Try ROM flashing with Vista, etc...
Remember, there is a lot of valid data in Hermes forum as well
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
ptgptg said:
jjb, I had the same problem the other night on my home computer with XP. Luckily, I did not have the same problem with my work computer, also with xp. Something happended on the home computer to fcuk up the drivers (i'm guessing, as GSLEON pointed out). I had the same install issues with Activestinc. I had these issues in the past (at least 6 months ago) and was able to finally get Activestinc installed after rebooting multiple times. This time I only tried once before I waited to go back to the office and flash. I'm not sure what to do to rebuild(?) the drivers, but you might try a different computer. Also, my google search (for the 200 error) the other night pulled up a different web site that listed a lot of error codes and what they mean. I'm gonna try and figure out my driver issues with activstinc this weekend and I will post if successful.
Click to expand...
Click to collapse
Thanks for the input... im going to try re-installing windows when I get the chance and hopefully that will clear up this driver issue.
rather than going through all the trouble trying to solve this problem, i would just flash using the microsd card
So let me start by saying I have been researching these forums for the last 8 hours trying to following instructions on getting my phone to connect to my computer and with no luck, hoping someone out there can please help me step by step in correcting my problem.
1)I flashed DC's Rom, then flashed the most current radio, then flashed the most current Wimax.
2)I noticed that when I connect my phone to the computer, it says device is not recognizable. The phone charges but does cannot be seen by the computer as a disk drive (I'm trying to RUU to stock but the comp. will not see my phone and I've already tried running RUU but it also is having probs seeing the phone).
3)I've read Calculin's instructions in fixing the SD Card and USB as close as possible but also no luck. I've downloaded Android-SDK Tools and ran CMD with the Instructions saying type in "fastboot oem boot", from there, thats where I get stuck, it just says "waiting on device". Not sure where I go from there, I'm in Reboot mode where it has Fastboot on my evo screen.
Any help would be much appreciated, I'm just so frustrated and I'm trying to get back to square one.
Unplug your phone and restart it, then plug it back in. I had to do this 3 times before it started working again. Other than that, you might just need to download the new drivers.
And you posted in the wrong section.
Sorry about posting in the wrong section, what drivers should I install, are you talking about the new HTC Sync Files or something else? Can you point in the direction to get these files?
okay, I think I'm getting close, I have a box thats popping up now thats trying to located the Device Driver the phone. It says "Failed" next to the line "MY HTC" Where can I download the necessary drivers for this phone?
faquedado said:
okay, I think I'm getting close, I have a box thats popping up now thats trying to located the Device Driver the phone. It says "Failed" next to the line "MY HTC" Where can I download the necessary drivers for this phone?
Click to expand...
Click to collapse
You should be able to get the proper drivers from either Sprint or HTC's web site. There are links on both sites. Also, when you install / reinstall the sync drivers make sure anti-virus is disabled. If the situation continues and you've tried everything else other folks suggested look at program permissions in your anti-virus program. I was having something similar and CA anti-virus was not letting the program start-up. I had to toggle it to "allow".
Good Luck.
I've got a very unexpected and disruptive problems.
Noticed yesterday that Odin no longer find my phone. When I went into the download mode and connect the phone it pops up a windows message, "USB Device Not Recognized". Everything worked just fine until yesterday.
I've tried to install the drivers again without success.
I have also reinstalled Windows, but even then, without success. How should I do? Something is very wrong with my phone :/
Another problem is that I cant do something in the recovery anymore. Some signature is missing. Same thing with Clockwork.
Dont know what to do anymore. The only thing I can do is root with Super One-Click.
Has anyone got any ideas?
Btw, I have done factory reset. Many times
I solved it. I connected the phone to my old laptop with Windows XP and it ran on really well
Hey,
my phone was stock gingerbread v21e when I decided to try ICS. After all I got it working but was not really convinced. So I tried to downgrade to gingerbread again. First try everything was working, except one thing: When I enter the download mode it shows the korean letters, still. Is it normal or have I done a mistake while downgrading?
Sry for my bad english
edit: I used the LG Flahstool for everything and the Resurrection Guide
I've got this problem, too
it's normal you have downgraded
I had the same, when i downgraded still everytime when the download screen apeared the korean was there.
After downgrading a ran the official lg tool, it updated to v21e, still korean download mode. Then i flashed the files out the downgrade the undowngradeble topic.
That solved it
Don't ask me why:laugh:
defcomg said:
it's normal you have downgraded
Click to expand...
Click to collapse
But was the screen not something like "SW DOWNLOAD" before?
Samstag494 said:
But was the screen not something like "SW DOWNLOAD" before?
Click to expand...
Click to collapse
Yes
You just followed the undowngradeable guide and it was like before? Ill give it a try tommorow
I can't enter the Fastboot mode... Everytime I install the LG driver 1.0 und the OMAP drivers and plug the phone to the PC it just installs all the LG drivers, but OMAP wont pop up... what am I doing wrong?
Samstag494 said:
I can't enter the Fastboot mode... Everytime I install the LG driver 1.0 und the OMAP drivers and plug the phone to the PC it just installs all the LG drivers, but OMAP wont pop up... what am I doing wrong?
Click to expand...
Click to collapse
use wkparks omap4boot, it will enter fastboot for you.
Install newest lg drivers, and have omap drivers ready, go to devices then plug your phone WITHOUT batery in the usb port, omap will flash three times.
You need to click fast, first flash i opened the device properties, second flash i opened driver settings (then the actual driver not loaded message dissapears, just wait. third flash (you're still in the driver screen) click as fast as possible on the appearing driver fault line.
Then manual search for driver, the go to your omap drivers folder. instal amd64 for 64 bit (doesn't matter which procesor your pc use) if on 32 bit, install the other.
thats's all
ps i'm on a dutch system so i've translated the device screen as best as possible, but i don't know the real names. So maybe you've need extra clarificfation
Every time I try to install the drivers manually, it just shows the message "drivers could not be installed". Doesnt matter which folder I chose. Is it because Win 64 bit? I read that OMAP drivers are not compatible?
On Win 32 OMAP doesnt show up, maybe after a reboot, ill try tommorow
Okay, I got OMAP installed and the fastboot program recognizes it. But when I remove the USB cable, no LG logo is coming
when you've started wparks omap prog, choose 2, then in your screen there's a message, wait 5 seconds. Then put your battery in. no you should enter fastboot mode. It's not neccesary to remove usb cable, something i've experienced. But what works for you
I did it, problem was LG COSMO wasnt installed... (Im an idiot ) How can I test the Downloade Mode Screen?
i tried to hard rest my Karbonna9+ android phone. i pressed Power+volume+home button. after that there was an error displayed on the screen saying "ENTRY QPST DOWNLOAD". i quickly searched on the internet but wasnt able to find any successful link. but then my computer asked me to format the device, i thought this will reset my phone but unfortunately i was totally wrong. after the format i tried to start my phone again but nothing happened. i also tried different combinations of keys but all nothing happens not even a single pixel lit up lol. then i downloaded cherry mobile flare software and AIO flasher and all the image files and other files required. they didnt work for me too coz my laptop (windows 7, 64 bit) doesn't recognise the device (unknown device or Com5 error). i tried to flash it in fastboot in AIO flasher. it says flashing but nothing really happens even after 10-15 minutes. all the online forums i searched they say enable debugging mode on ur phone in order to reboot but i dont know how the heck i can do it when my phone doesnt even start up lol. I am left with a dead phone now. can anyone please help me out and solve my problem. and please advise me step by step what to do next in order to get my phone working please...
Try this thread and let know if its what you want.