Database Info

1.6 oc stable!!!

WARNING: I AM NO RESPONSIBLE FOR ANY DAMAGE YOU HAVE CAUSED YOUR PHONE!!!
OC CAN BE DANGEROUS FOR THE CPU, EVERYONE KNOWS THIS AND IF YOU DONT YOU DO NOW
Ok some people will find this useful and some might not care for it, but i wanted to post this to help those who like to OC there android or in this case the SGS4G.
NEW DIRECTIONS:
what you'll need:
any sgs4g rom that supports drhonks bali 3.0 or higher
bali 3.0 or higher
IM NOT POSITIVE but you possibly need ext4 on ALL partitions
tegrak ultimate
im pretty sure drhonks kernel is what made the OC stable at higher frequencies so definitely thank him for that
its simple after you have the rom and bali 3.0 or 3.1 installed the phone will be stable at a higher frequency
so far the highest frequency ive been to is 1620 and it was very stable with the voltages at 1400 and 1200
OLD DIRECTIONS:What you will need:
fugu Tweaks which can be found here (http://forum.xda-developers.com/showthread.php?t=981125)
DRHONKS UV KERNEL
TEGRAK OC PAID VERSION!!!
NO SETCPU OR ANY OTHER PROGRAM LIKE IT, TEGRAK COMES WITH SCALING OPTION!!!
ok so now that you have what you need its time to push that puppy up a notch!!!
Make sure you the fugu tweaks are installed and working.
then go into Tegrak OC and use the following options for a 1.5 OC:
go into optimization option and edit CPU level 0 ONLY!!!(unless you dont have DRHONKS UV KERNEL you can change all the other levels by -25 core voltage)
Assuming you have the kernel go into CPU LEVEL 0 and change the 1000 to 1504 or 1500 it doesnt matter,
after that has been changed, change your core voltage to 1400 and your internal voltage to 1175. Last thing you need to do is make sure you scaling option in tegrak is set to conservative with 200 as your lowest frequency not 100 or else it might crash while in sleep mode.
THATS IT!!!
if you want to OC but not so high try optimizing things step by step and see what frequencies are best with what voltages.
1.4 OC settings are as followed
level 0 1000 to 1400, core voltage is 1325 and internal is 1150
1.3 OC settings are as followed
Level 0 1000 to 1300, core voltage is 1300 and internal 1125
1.2 OC settings are as followed
level 0 1000 to 1200, core voltage 1225 internal 1100
(also to improve smoothness even more try adding spare parts and blade buddy)
hope this helps!!
THANKS TO:
TEGRAK for his amazing app
NIKADEMUS for FUGU tweak
DRHONK for his amazingness in general and making the fugu tweaks known also for his kernel!
Chadster: i think you posted something on fugu tweaks as well lol
Fatherof4 for confirming that my methods work besides on my phone

can you post quadrant scores i dont have the tegrak paid version but just want to see what this puppy can do

rickyc19 said:
can you post quadrant scores i dont have the tegrak paid version but just want to see what this puppy can do
Click to expand...
Click to collapse
im having problems with uploading my screenshots at the moment, maybe fatherof4 can do it or ill fix it
but im reaching 1300's in quadrant and fatherof4 was reporting the same scores after OC sooo

I get 1300+ quadrant @ 1.4 haven't tested @ 1.5, will have to do that soon
Sent from my SGH-T959V using Tapatalk

Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk

Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
repost the pic i cant see it
and what settings do you use for 1.5
is it any different then what im doing?

Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
dang!!! 1400 im not even getting that!!
hahaha what are you doing to your phone I MUST KNOW!

Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
nice!!! finally went to the top

How is your battery life?
How is your battery life after the OC 1.5? Also, does it make a substantial difference in speed of the UI? What advantages have you seen with overclocking your device to 1.5 ghz? I'm just checking before I try it out. Thank you.

dsexton702 said:
repost the pic i cant see it
and what settings do you use for 1.5
is it any different then what im doing?
Click to expand...
Click to collapse
Pic reposted. I used the same settings as the OP.
Sent from my SGH-T959V using Tapatalk

Somairotevoli said:
Pic reposted. I used the same settings as the OP.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
lmao yay for my settings,
i think i know why i dont get the 1400
i dont just have the fugu tweaks on my phone
i have been doing a lot of modding! lol
looks like i need to redo some of my mods D:

bruceleroyjr said:
How is your battery life after the OC 1.5? Also, does it make a substantial difference in speed of the UI? What advantages have you seen with overclocking your device to 1.5 ghz? I'm just checking before I try it out. Thank you.
Click to expand...
Click to collapse
I only went to 1.5 for the test. I've been at 1.4 for about 2 weeks. 1325/1150 and the rest core voltages underclocked by 25 except 100mhz I use setcpu for profile options and have it set to throttle down to 400/200 when screen is off. I also am using chainfire 3D.
I get 20 plus hours heavy usage.
Sent from my SGH-T959V using Tapatalk

Somairotevoli said:
I only went to 1.5 for the test. I've been at 1.4 for about 2 weeks. 1325/1150 and the rest core voltages underclocked by 25 except 100mhz I use setcpu for profile options and have it set to throttle down to 400/200 when screen is off. I also am using chainfire 3D.
I get 20 plus hours heavy usage.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
how exactly do you install chainfire 3d his instructions slightly threw me off

dsexton702 said:
lmao yay for my settings,
i think i know why i dont get the 1400
i dont just have the fugu tweaks on my phone
i have been doing a lot of modding! lol
looks like i need to redo some of my mods D:
Click to expand...
Click to collapse
I got that 1307 before fugu
Sent from my SGH-T959V using Tapatalk

The market wont let me buy tegrak.....!

Could some1 explain the plus and minus of OC? Would be much appreciated. Wouldn't this also generate more heat?
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!

GDofWR420 said:
Could some1 explain the plus and minus of OC? Would be much appreciated. Wouldn't this also generate more heat?
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!
Click to expand...
Click to collapse
When i first got the phone and there wasnt much development on it and I OC it, the phone would get all the way to 50C
Now with the tweaks, mods, kernel even when i run my phone on heavy use playing the game Modern Combat 2 Black Pegasus it doesnt even get to 50C on the 1.5 OC
the battery life takes a SLIGHT TOLL
i still average 20 to 30 hours on my phone with 1.5 and no charge, that is also with a pretty heavy use:
on xda, twitter, facebook, email, internet, texts, games and this is non stop all day soooooo even with the OC
ALL I SEE ARE ADVANTAGES

How the heck do you get 20-30 hours heavy usage with it overclocked? I have mine with bali kernel UV not overclocked and I get maybe 10-15 hours moderate to heavy use
Sent from my SGH-T959V using XDA Premium App

rickyc19 said:
How the heck do you get 20-30 hours heavy usage with it overclocked? I have mine with bali kernel UV not overclocked and I get maybe 10-15 hours moderate to heavy use
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Have you calibrated your battery correctly, my battery has been precisely calibrated lol
Seriously though my phone lasts forever and I run a 1.5 oc with UV kernel
Freshness!
Sent from my SGH-T959V using XDA Premium App

dsexton702 said:
Have you calibrated your battery correctly, my battery has been precisely calibrated lol
Seriously though my phone lasts forever and I run a 1.5 oc with UV kernel
Freshness!
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I would have to agree that battery life has drastically improved due to the Bali kernel. So my next question would be is it worth it to OC versus loss of battery life or is the loss so slight that its worth sacrificing for better performance? I do have to say its pretty smooth already.
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!

[GUIDE] Undervolting for better battery life

Since this is a popular topic and since MSNBERG requested that i make this, i have decided to make it.
THE GUIDE TO UNDERVOLTING
What you will need:
PREFERABLY the application Tegrak OVERCLOCK PAID! can also use set cpu
TEGRAK
LOAD THE OVERCLOCK MODULE
go into the "TWEAKS" section and be sure to select DEADLINE as your scheduler!!!
you will see the option "OPTIMIZATION" go there
now you will see 5 levels to customize
ONLY LEVEL 0 CAN YOU CUSTOMIZE EVERYTHING
Now if you only want to undervolt with no overclock here is the chart you need to use ON GINGERBREAD:
UNDERVOLT SETTINGS
level0 - 1000 - 1155 - 1065 -------this level can change frequency but volts need to change as well
level1 - 800 - 1040 - 1035
level2 - 400 - 955 - 960
level3 - 200 - 835 - 950
level4 - 100 - 825 - 930
once you enter these in you can go to tegraks main menu and go into "PROFILE" and you can save your current settings or choose previous ones.
Here are some overclock values you can use for level 0
LEVEL 0 1100 1100 1090
LEVEL 0 1200 1195 1095
LEVEL 0 1300 1295 1115
LEVEL 0 1400 1315 1125
LEVEL 0 1500 1375-85 1150
LEVEL 0 1600 1400 1175-1200
***THIS WILL BE UPDATED WITH MORE INFO SOON

In my best Mr. Burns voice: Excellent!

Always wanted a undervolting guide. Nice!

:C my phone reboots with these undervolt values for some reason. I'm running Valhalla 1.1(haven't has the time to update and don't have wifi so...) and adrenaline shot X. I also have stability checker off so I'm sure that's not the issue. Its fine at first but then rebootes once I start mulititasking like listening to music, texting and getting on Facebook at the same time. Seems to work fine for everyone else so I don't get what's going on
Sent from my SGH-T959V using XDA App

icy56 said:
:C my phone reboots with these undervolt values for some reason. I'm running Valhalla 1.1(haven't has the time to update and don't have wifi so...) and adrenaline shot X. I also have stability checker off so I'm sure that's not the issue. Its fine at first but then rebootes once I start mulititasking like listening to music, texting and getting on Facebook at the same time. Seems to work fine for everyone else so I don't get what's going on
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
What governor and scheduler.are.you using
Sent from my SGH-T959V using XDA Premium App

I'm using ondemand as the governor. I have no idea what a scheduler is.
*edit*
The io scheduler? Well its set to cfq.
Sent from my SGH-T959V using XDA App

Thanks a lot for this. I have been looking forward to this guide! Awesome work again Dsexton

icy56 said:
I'm using ondemand as the governor. I have no idea what a scheduler is.
*edit*
The io scheduler? Well its set to cfq.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Change cfq to deadline
Sent from my GT-P7510 using xda premium

jager555 said:
Change cfq to deadline
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
THANK YOU!!!! its finnaly working. Haven't had a single reboot yet. You sir just saved me a trip to T-Mobile. I thought there was something wrong with my phone since I was the only one getting that issue.
Sent from my SGH-T959V using XDA App

jager555 said:
Change cfq to deadline
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
Thats what I was going to say, good job
Sent from my SGH-T959V using XDA Premium App

thanks dexter like always!!
Sent from my SGH-T959V using XDA App

Hi guys,
Sorry for the rookey questions, but :
1. Do I need to install TegraK kernel ? If so, before or after installing TegraK overclock ?
2. Will TegraK OC free version do, or i need the paid version ? what's the difference ?
3. ICY56 - I'm having the exact configuration you have (Valhalla 1.1 and Adrenaline ShotX) can you please explain what changes you noticed regarding battery consumption, and doesn't it affect your phone responsiveness, stability and performance ?
Thanks,
Itzik.

Answers
1) Tegrak will work fine with valhalla, most (if not every) custom rom has the needed kernel already.
2) You need the paid version because free version only allows overclock up to 1.3 you cant adjust anything else.
3) I can't answer as I'm not set up the same, but from my understanding you shouldn't see any negative affects, just increased battery life.

Every time I try to undervolt my phone. It reboots constantly. Even with ICBINB KJ1. Scheduler is set to deadline and governor is set to ondemand. What am I doing wrong?

itzik2sh said:
Hi guys,
3. ICY56 - I'm having the exact configuration you have (Valhalla 1.1 and Adrenaline ShotX) can you please explain what changes you noticed regarding battery consumption, and doesn't it affect your phone responsiveness, stability and performance ?
Thanks,
Itzik.
Click to expand...
Click to collapse
Well I haven't noticed a decrease in performance and stability. The phone actually feels the exact same. As for bettery life, I can't really comment on that yet since I'm in the process of recalibrating my battery and I haven't been on UV long enough to say but so far battery life seems to be a little better
Sent from my SGH-T959V using XDA App

Nice work... tried and works .... 1600mhz looks like unstable in phone....
Sent from my SGH-T959V using XDA App

wizardslovak said:
Nice work... tried and works .... 1600mhz looks like unstable in phone....
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
It can be stable you just need to up voltages a lil more
Sent from my SGH-T959V using XDA Premium App

dsexton702 said:
It can be stable you just need to up voltages a lil more
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Well ill play with it more.... usually ill get restarts within few seconds of setting up new parms... thx again...
Sent from my SGH-T959V using XDA App

Even if I increase voltage it still freezes and then restarts phone @ 1600mhz
Sent from my SGH-T959V using XDA App

I've had 1664 mhz before stable. It can ne done, every phone will be different with what voltages work. experiment a little. But I wouldn't go to high, don't want a $500 paperweight.
@ 1.3 GHz, this phone its rock solid, so anything higher is over kill imo.
Sent from my SGH-T959V using xda premium

Kernal voltages?

I'm sorry for the noob question but I really don't understand voltage terms and what's it for and how it work I was wandering if anyone could explain it to me?
In the past I would use set CPU and create a few profiles and would be done with it but I been reading on the forums about setting voltages higher and lower for better performance.
Currently i'm on eagles blood 2.3.5 ROM, trinity t15 (fun) kernel.
Any help would be much appreciated.
Sent from my LG-P999 using XDA App

Don't know what it does don't use it
Sent from my LG-P999 using XDA App

ritthyhang said:
I'm sorry for the noob question but I really don't understand voltage terms and what's it for and how it work I was wandering if anyone could explain it to me?
Click to expand...
Click to collapse
It's to save power and get better battery life. You lower the amount of power the chip gets at various clockspeeds until it starts not working correctly, then back up to a voltage at which the chip is stable at that clockspeed. Some chips can handle lower voltages than others while still working correctly.
Overclocking = get better performance
Undervolting = get better battery life
Both can lead to phone instability if you set the values to extremes.

Thank you for the info
Sent from my LG-P999 using XDA App

lannister80 said:
It's to save power and get better battery life. You lower the amount of power the chip gets at various clockspeeds until it starts not working correctly, then back up to a voltage at which the chip is stable at that clockspeed. Some chips can handle lower voltages than others while still working correctly.
Overclocking = get better performance
Undervolting = get better battery life
Both can lead to phone instability if you set the values to extremes.
Click to expand...
Click to collapse
So lemme ask this how do I undervolt and what voltage is safe to undervolt?
Sent from my LG-P999 using XDA App

ritthyhang said:
So lemme ask this how do I undervolt and what voltage is safe to undervolt?
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
It all depends on the kernel your using and if it supports UV, it should say if it does in the name of the kernel tho(just look for uv ) Setcpu 2.2.4 will allow you to change voltages only if your kernel/rom support it.
you can safely undervolt -50 -75 at most all the way up to 1.0ghz-1.1ghz i wouldn't undervolt past that.

d12unk13astard said:
It all depends on the kernel your using and if it supports UV, it should say if it does in the name of the kernel tho(just look for uv ) Setcpu 2.2.4 will allow you to change voltages only if your kernel/rom support it.
you can safely undervolt -50 -75 at most all the way up to 1.0ghz-1.1ghz i wouldn't undervolt past that.
Click to expand...
Click to collapse
So what your saying is I can use setcpu to change the voltage?I just recently changed kernels I saw that option available but I didn't understand how to use it.under voltages it shows all the GHz underneath it it shows 0.From here what do I do?, do I go too each GHz profile and -50 from all of it?
Sent from my LG-P999 using XDA App

Voltage Control

On Voltage Control with Entropy's Daily Driver, what I/O scheduler would you recommend? Also what voltage configuration? I'm looking for saving battery while staying at 1200MHz
Sent from my nice little phone... or should I say huge gigantic beast

Here's the uv settings I use. As for the io schedulers id say bfq
Sent from my SAMSUNG-SGH-I997 using xda premium

JordanElliott said:
Here's the uv settings I use. As for the io schedulers id say bfq
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I would say these are very extreme! My phone froze with 100 and 200 at 750. I would say keep them at 800 or 825. And don't forget to uncheck "set at boot" until they are stable.

So what are the ideal ones. Mind posting a list for 1200 and OC.

Optimus-Prime said:
So what are the ideal ones. Mind posting a list for 1200 and OC.
Click to expand...
Click to collapse
I would recommend being conservative. Take off "apply at boot", use for a couple hours and see how it goes. If there are no freezes whatsoever, set "apply at boot".
Also, SetCPU and voltage control app both of them allow to create a CWM zip file that would delete all their settings to let phone get back to default values, in case something goes wrong. Make sure to create those zips as a rollback option.
Here are what I use:
100: -150 = 800
200: -150 = 800
400: -125 = 925
800: -125 = 1075
(my phone is at max 800; works pretty good)
1200: -100 = 1175
1600: -100 = 1300

yup
I use the antutu cpu master, voltage control costs money, cpu master is free

B3tray3d said:
I use the antutu cpu master, voltage control costs money, cpu master is free
Click to expand...
Click to collapse
Voltage control is FREE! Voltage control extreme cost $$ !
Big dog Infuse I997 GB KJ4

bignate78 said:
Voltage control is FREE! Voltage control extreme cost $$ !
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
I second that
Sent from my nice little phone... or should I say huge gigantic beast

B3tray3d said:
I use the antutu cpu master, voltage control costs money, cpu master is free
Click to expand...
Click to collapse
bignate78 said:
Voltage control is FREE! Voltage control extreme cost $$ !
Big dog Infuse I997 GB KJ4
Click to expand...
Click to collapse
I bought SetCPU within a few days when I bought Captivate on the 2nd day of its release. Since then using the same. And now its been supporting voltages too from quite some time.

I use sio because super charger script changed it for me, and I have to say my battery life has gotten way better.
Samsung Infuse using XDA App

xdahgary said:
I use sio because super charger script changed it for me, and I have to say my battery life has gotten way better.
Samsung Infuse using XDA App
Click to expand...
Click to collapse
What's that blue square in the status bar in your screenshots?

diablo009 said:
What's that blue square in the status bar in your screenshots?
Click to expand...
Click to collapse
NoLED
Samsung Infuse using XDA App

This would need the Infusion kernel to run correct? Will Defuse work???

Post your stable PBJ settings

As the title states, put up your dukes!
Running manually debloated stock odex'ed
0502 PBJ EXT4
Scheduler BFQ
Governer Performance
100Mhz-No UV
400Mhz-No UV
1000Mhz-No UV
1,400Mhz-No UV
There is still an annoying lag here and there but for the most part it rips!

Eclipse v1.4, FP1 radios, sio scheduler, smartassV2 governor, 0130 PBJ
Code:
1400MHz -> -50mV (don't typically use this one)
1300MHz -> -50mV
1200MHz -> -50mV
1000MHz -> -75mV
800MHz -> -100mV
400MHz -> -100mV
200MHz -> -125mV
100MHz -> -150mV
[edit: Forgot to add my governor. OP, you use performance all the time? How does that not destroy your battery?]

Tweaked v2
PBJ May EXT4
0-800mhz -100mv smartassv2 sio
Anything else?
Sent from my SCH-I510 using xda premium

Tweaked 2
Pbj 0502
Smartasv2
1200 - 50
1000 -75
800 -100
400 -125
200 -150
100 -200
Sent from my handheld Linux computer using electromagnetic radiation.

Cilraaz said:
[edit: Forgot to add my governor. OP, you use performance all the time? How does that not destroy your battery?]
Click to expand...
Click to collapse
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?

bwheelies said:
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?
Click to expand...
Click to collapse
No problems for me. And performance governor means the phone stays at max frequency all the time. You should never use it for real usage just for testing.

bwheelies said:
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?
Click to expand...
Click to collapse
Undervolting has zero to do with performance. The danger with undervolting is instability. If you undervolt too much, you'll crash because your CPU can't draw enough power to do an operation.
A certain CPU is able to do a certain amount of work in a given clock cycle, and that amount of work does not change in the slightest with voltage.
EDIT: Also, as JihadSquad said, performance keeps your CPU at 100% maximum clock speed at all times. It doesn't let it slow down. It is brutal on a battery for no real world gain.

Anyone notice when using smart ass governor it won't overclock to 1400 , it can over chick anything else but not 1400 for some reason so I have it at 1440
Sent from my SCH-I510 using XDA

And I'm using set cpu
Sent from my SCH-I510 using XDA

Ahh 1.5ghz is so smooth!, I'm running that from now on, it improves touch sensitivity
Sent from my SCH-I510 using XDA

juanzr1 said:
Ahh 1.5ghz is so smooth!, I'm running that from now on, it improves touch sensitivity
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.

JihadSquad said:
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.
Click to expand...
Click to collapse
I can only get 1300 on mine. 1400 randomly reboots on me after a while.

JihadSquad said:
Lucky lucky piece of silicon right there.
Click to expand...
Click to collapse
Or unlucky. At SetCPU's default for 1500MHz, it's running +325mV (+27.7%) from stock. So it's either really good silicon or a contender for a replacement in a few months.

Eclipse 2.0
CWM version 5.0.2.7
Baseband i510.06.FP1
Kernel 2.3.35.4-EP4-g311a209
Build SCH-I510.FP1
Lag is brutal sometimes. Speaker crackles and pops. Phone calls only last a couple minutes before the person on the other end can't hear me.
I am looking for a better solution. Any pointers would help greatly.

Oldtymehockey said:
Eclipse 2.0
CWM version 5.0.2.7
Baseband i510.06.FP1
Kernel 2.3.35.4-EP4-g311a209
Build SCH-I510.FP1
Lag is brutal sometimes. Speaker crackles and pops. Phone calls only last a couple minutes before the person on the other end can't hear me.
I am looking for a better solution. Any pointers would help greatly.
Click to expand...
Click to collapse
For one thing, you're running an EP4 kernel with a FP1 rom and radio. Install a FP1 kernel, either stock (http://forum.xda-developers.com/showthread.php?t=1582470) or PBJ (http://rootzwiki.com/topic/137-05-04-12peanutbutta-jelly-time/) and go from there.

shrike1978 said:
For one thing, you're running an EP4 kernel with a FP1 rom and radio. Install a FP1 kernel, either stock (http://forum.xda-developers.com/showthread.php?t=1582470) or PBJ (http://rootzwiki.com/topic/137-05-04-12peanutbutta-jelly-time/) and go from there.
Click to expand...
Click to collapse
I think I need to deal with the file system first. I have that discussion going in another thread.
Perhaps Odin back to stock and reapplying changes in order is in order.

JihadSquad said:
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.
Click to expand...
Click to collapse
Well 1500 crashed on me and 1440 was a little better but it also crashed
Sent from my SCH-I510 using XDA

What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium

wolverine38812 said:
What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Did you wipe cache and dalvik. I like doing it before and after flashing kernel and rom.... don't forget to mount system, if that does not do it mount everything.... post the steps you have used before so we can better help you.
Sent from my SCH-I510 using XDA

wolverine38812 said:
What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Try to fix permissions before leaving CWM. That has worked for some people trying to go back to stock.