WARNING: I AM NO RESPONSIBLE FOR ANY DAMAGE YOU HAVE CAUSED YOUR PHONE!!!
OC CAN BE DANGEROUS FOR THE CPU, EVERYONE KNOWS THIS AND IF YOU DONT YOU DO NOW
Ok some people will find this useful and some might not care for it, but i wanted to post this to help those who like to OC there android or in this case the SGS4G.
NEW DIRECTIONS:
what you'll need:
any sgs4g rom that supports drhonks bali 3.0 or higher
bali 3.0 or higher
IM NOT POSITIVE but you possibly need ext4 on ALL partitions
tegrak ultimate
im pretty sure drhonks kernel is what made the OC stable at higher frequencies so definitely thank him for that
its simple after you have the rom and bali 3.0 or 3.1 installed the phone will be stable at a higher frequency
so far the highest frequency ive been to is 1620 and it was very stable with the voltages at 1400 and 1200
OLD DIRECTIONS:What you will need:
fugu Tweaks which can be found here (http://forum.xda-developers.com/showthread.php?t=981125)
DRHONKS UV KERNEL
TEGRAK OC PAID VERSION!!!
NO SETCPU OR ANY OTHER PROGRAM LIKE IT, TEGRAK COMES WITH SCALING OPTION!!!
ok so now that you have what you need its time to push that puppy up a notch!!!
Make sure you the fugu tweaks are installed and working.
then go into Tegrak OC and use the following options for a 1.5 OC:
go into optimization option and edit CPU level 0 ONLY!!!(unless you dont have DRHONKS UV KERNEL you can change all the other levels by -25 core voltage)
Assuming you have the kernel go into CPU LEVEL 0 and change the 1000 to 1504 or 1500 it doesnt matter,
after that has been changed, change your core voltage to 1400 and your internal voltage to 1175. Last thing you need to do is make sure you scaling option in tegrak is set to conservative with 200 as your lowest frequency not 100 or else it might crash while in sleep mode.
THATS IT!!!
if you want to OC but not so high try optimizing things step by step and see what frequencies are best with what voltages.
1.4 OC settings are as followed
level 0 1000 to 1400, core voltage is 1325 and internal is 1150
1.3 OC settings are as followed
Level 0 1000 to 1300, core voltage is 1300 and internal 1125
1.2 OC settings are as followed
level 0 1000 to 1200, core voltage 1225 internal 1100
(also to improve smoothness even more try adding spare parts and blade buddy)
hope this helps!!
THANKS TO:
TEGRAK for his amazing app
NIKADEMUS for FUGU tweak
DRHONK for his amazingness in general and making the fugu tweaks known also for his kernel!
Chadster: i think you posted something on fugu tweaks as well lol
Fatherof4 for confirming that my methods work besides on my phone
can you post quadrant scores i dont have the tegrak paid version but just want to see what this puppy can do
rickyc19 said:
can you post quadrant scores i dont have the tegrak paid version but just want to see what this puppy can do
Click to expand...
Click to collapse
im having problems with uploading my screenshots at the moment, maybe fatherof4 can do it or ill fix it
but im reaching 1300's in quadrant and fatherof4 was reporting the same scores after OC sooo
I get 1300+ quadrant @ 1.4 haven't tested @ 1.5, will have to do that soon
Sent from my SGH-T959V using Tapatalk
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
repost the pic i cant see it
and what settings do you use for 1.5
is it any different then what im doing?
Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
dang!!! 1400 im not even getting that!!
hahaha what are you doing to your phone I MUST KNOW!
Somairotevoli said:
Here's 1.5 . See for yourself.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
nice!!! finally went to the top
How is your battery life?
How is your battery life after the OC 1.5? Also, does it make a substantial difference in speed of the UI? What advantages have you seen with overclocking your device to 1.5 ghz? I'm just checking before I try it out. Thank you.
dsexton702 said:
repost the pic i cant see it
and what settings do you use for 1.5
is it any different then what im doing?
Click to expand...
Click to collapse
Pic reposted. I used the same settings as the OP.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
Pic reposted. I used the same settings as the OP.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
lmao yay for my settings,
i think i know why i dont get the 1400
i dont just have the fugu tweaks on my phone
i have been doing a lot of modding! lol
looks like i need to redo some of my mods D:
bruceleroyjr said:
How is your battery life after the OC 1.5? Also, does it make a substantial difference in speed of the UI? What advantages have you seen with overclocking your device to 1.5 ghz? I'm just checking before I try it out. Thank you.
Click to expand...
Click to collapse
I only went to 1.5 for the test. I've been at 1.4 for about 2 weeks. 1325/1150 and the rest core voltages underclocked by 25 except 100mhz I use setcpu for profile options and have it set to throttle down to 400/200 when screen is off. I also am using chainfire 3D.
I get 20 plus hours heavy usage.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
I only went to 1.5 for the test. I've been at 1.4 for about 2 weeks. 1325/1150 and the rest core voltages underclocked by 25 except 100mhz I use setcpu for profile options and have it set to throttle down to 400/200 when screen is off. I also am using chainfire 3D.
I get 20 plus hours heavy usage.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
how exactly do you install chainfire 3d his instructions slightly threw me off
dsexton702 said:
lmao yay for my settings,
i think i know why i dont get the 1400
i dont just have the fugu tweaks on my phone
i have been doing a lot of modding! lol
looks like i need to redo some of my mods D:
Click to expand...
Click to collapse
I got that 1307 before fugu
Sent from my SGH-T959V using Tapatalk
The market wont let me buy tegrak.....!
Could some1 explain the plus and minus of OC? Would be much appreciated. Wouldn't this also generate more heat?
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!
GDofWR420 said:
Could some1 explain the plus and minus of OC? Would be much appreciated. Wouldn't this also generate more heat?
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!
Click to expand...
Click to collapse
When i first got the phone and there wasnt much development on it and I OC it, the phone would get all the way to 50C
Now with the tweaks, mods, kernel even when i run my phone on heavy use playing the game Modern Combat 2 Black Pegasus it doesnt even get to 50C on the 1.5 OC
the battery life takes a SLIGHT TOLL
i still average 20 to 30 hours on my phone with 1.5 and no charge, that is also with a pretty heavy use:
on xda, twitter, facebook, email, internet, texts, games and this is non stop all day soooooo even with the OC
ALL I SEE ARE ADVANTAGES
How the heck do you get 20-30 hours heavy usage with it overclocked? I have mine with bali kernel UV not overclocked and I get maybe 10-15 hours moderate to heavy use
Sent from my SGH-T959V using XDA Premium App
rickyc19 said:
How the heck do you get 20-30 hours heavy usage with it overclocked? I have mine with bali kernel UV not overclocked and I get maybe 10-15 hours moderate to heavy use
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Have you calibrated your battery correctly, my battery has been precisely calibrated lol
Seriously though my phone lasts forever and I run a 1.5 oc with UV kernel
Freshness!
Sent from my SGH-T959V using XDA Premium App
dsexton702 said:
Have you calibrated your battery correctly, my battery has been precisely calibrated lol
Seriously though my phone lasts forever and I run a 1.5 oc with UV kernel
Freshness!
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I would have to agree that battery life has drastically improved due to the Bali kernel. So my next question would be is it worth it to OC versus loss of battery life or is the loss so slight that its worth sacrificing for better performance? I do have to say its pretty smooth already.
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!
Related
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Sooooo you over clocked to it to 1.5, but yet you still need to find a way to do it?? Read..... all the answers are in this very section....
Oh by the way wrong section to post.
Sent from the fifth dimension...
rafarataneneces said:
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
ok first set cpu will not be able to oc for you. use pimp my cpu you should be able to find it if you do a search. second if you want to oc use faux's kernel for that.
rafarataneneces said:
Quadrant I got 3000 points with 1.5Ghz
Click to expand...
Click to collapse
4500 with faux rom 1.2.4 and 0.2.2 kernel.
Sent from my LG-P999 using XDA App
I used SetCPU before on my OptimusT, and it was actually working pretty good, BUT NOT ON LGE STAR. For now, the best overlocking app for LGE STAR is PimpMyCPU WITH CUSTOMIZED KERNEL.
With FR and Faux's kernel, you can easily get 4000+ on Quadrant.
With GB and its own kernel, I think we just get like 3000+
Sent from my LG-P999 using XDA Premium App
Oh 1 more thing, T-mobile doesn't release the GB update for LGE Star yet. The CM project is built based on the GB source code only...
Sent from my LG-P999 using XDA Premium App
Use pimp my cpu, setcpu doesn't let you overclock. It only shows your cpu speed but nothing else.
Sent from my G2x
Thread moved to proper forum.
rafarataneneces said:
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
I got 4094 in quadrant OCed to 1.5Ghz on Ultimate, very impressive considering its a froyo rom nonetheless
Sent from my NookColor using XDA Premium App
rafarataneneces said:
If I have CM7 #54, do I need a special kernel or not?
SetCPU is not detecting the frequencies for me
I am using CPUMaster but I have the free version only
What is the best software to overclock automatically?
I also want profiles (Battery temp, battery %, screen off...)
In Quadrant I got 3000 points with 1.5Ghz
Now I only need to find a way to overclock it and have all the profiles and boot overclock work right out of the box
Thanks a lot
Click to expand...
Click to collapse
I thoroughly tested OC on CM with different kernels. I got the best results with the Trinity kernel. My highest recorded Quadrant score was 4920 and I averaged 4690 over 10 trials with that configuration.
http://forum.xda-developers.com/showthread.php?t=1078049&highlight=trinity
What do you think is the best OC/UV app ? If so can you also post the recommendations ? THANK YOU IN ADVANCE!
There's been thousands of posts, not sure of threads, in the forum regarding this.
Tegrak OC seems to be the most popular though. Most tend to stay away from SetCPU.
I personally never OC or UV. I find that my speed and battery life are perfectly acceptable.
Yeah tegrak seems to be what everyone uses. I stay away from OCing though because i don't really see the purpose of OCing just for browsing the web, text messaging, Facebook, twitter, and YouTube. The phones really smooth already. I'm probably going to UV though to get a little better battery life.
Sent from my SGH-T959V using XDA App
You can't oc with set CPU without an overclock kernel
sent from my real Gs move in silence like lasagna
Tegrak Ultimate since it allows OC/UV with a kernel module as opposed to requiring a OC/UV kernel.
Compxpert said:
Tegrak Ultimate since it allows OC/UV with a kernel module as opposed to requiring a OC/UV kernel.
Click to expand...
Click to collapse
What's the difference?
Sent from my SGH-T959V using XDA App
For this phone tegrak is the best with the most control paid version is well worth it
at first this phone relied on overclocking but months later it is no longer needed imo, i just stay at 1000 mhz stock with undervolting and my phone feels as smooth as a 1.2 thank you gingerbread lol
Sent from my SGH-T959V using XDA Premium App
I use tegraq (paid) version to UC.. everything is so smooth now, the UC gives battery life and my quadscore is still in the 2500 range.
TegraK
Hi,
I'm interested only in UV, since my phone is super fast with Valhalla 1.1 ROM
and Adrenaline Shot X, but i drain my battery every day!
can you please explain -
1. can i undervolt using the free edition of tegrak ?
2. do i need to replace the kernel or can i work with tegrak app out of the box?
i didn't get that.
Thanks !
Well I just downloaded Taegrak ultimate, but it seems like my values will never stay ! I tried setting my CPU Lv 0 to 1000,1165,1055 but it'll always revert back to normal. Sometimes I'll catch a glimpse of "Targrak has unexpectedly.."
I openly consider the opinions of those who are for or against overclocking, I have heard both sides of the argument regarding its usefulness. Personally, I'm not fully decided. I respectfully ask we keep the thread on topic- posting your overclocks!
Here is mine with no noticeable heat or stability issues.
1.252 GHz
2791 Quadrant score
Humble 4.22
Imoseyon Kernel 3.10
Tegrak Overclock
I have heard people getting 1.4 GHz with the Charge, although I have heard of that some can't get above 1.2 GHz stable.
1.3 ghz Performance
EP4 Debloated
Imoseyon repacked kernel
Quadrant score: rape
Sent from my SCH-I510 using xda premium
kvswim said:
1.3 ghz Performance
EP4 Debloated
Imoseyon repacked kernel
Quadrant score: rape
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Rape +7
1.3 ghz. Govoner is performance
Quadrant score runs at about 2700 3000 btw quadrantts do mean anything other than a bunch of stupid numbers
Sent from my SCH-I510 using xda premium
I go the opposite route. Rather than overclocking, I'm undervolting. It really helps battery life and doesn't affect your performance. I'm running stock clocks with -30mV across the board using Tegrak with the interactiveX governor on EP4 at the moment. Using StabilityTest from the Market in scaling mode to test stability. Going to try to drop the voltages down a bit more soon, as I've been fully stable for almost a week on these.
over 9000!
No way your over 9000
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
No way your over 9000
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
I'm pretty sure that was a commentary on the complete uselessness of Quadrant scores
nitsuj17 said:
over 9000!
Click to expand...
Click to collapse
pretty sure this guy was joking. Sounds like a line from a show. Can't remember the name though (it's over 9000!!!!!!!)
bvsbutthd101 said:
pretty sure this guy was joking. Sounds like a line from a show. Can't remember the name though (it's over 9000!!!!!!!)
Click to expand...
Click to collapse
Dragon Ball Z. And yes, Quadrant is probably the least useful of benchmarks.
Sent from my SCH-I510 using xda premium
kvswim said:
Dragon Ball Z. And yes, Quadrant is probably the least useful of benchmarks.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
I actually find Quadrant useful for verifying lagfix and verifying over or under clocks.
One thing that overclocking allowed for was smoothing out 480p Flash video in the Browser that was choppy before.
Now that you guys vented your overclocking and Quadrant hate, back to the posting your overclocks!
*EDIT* Forgot to ask, does anybody know if there is an appreciable difference in battery life when overclocking at stock voltage? Theoretically, battery life should be the same no matter the clock speeds if the voltage is constant.
xdadevnube said:
I actually find Quadrant useful for verifying lagfix and verifying over or under clocks.
One thing that overclocking allowed for was smoothing out 480p Flash video in the Browser that was choppy before.
Now that you guys vented your overclocking and Quadrant hate, back to the posting your overclocks!
*EDIT* Forgot to ask, does anybody know if there is an appreciable difference in battery life when overclocking at stock voltage? Theoretically, battery life should be the same no matter the clock speeds if the voltage is constant.
Click to expand...
Click to collapse
Overclocking without a kernel that supports undervolting probably scales the voltage up appropriately.
Sent from my SCH-I510 using Tapatalk
xdadevnube said:
I actually find Quadrant useful for verifying lagfix and verifying over or under clocks.
One thing that overclocking allowed for was smoothing out 480p Flash video in the Browser that was choppy before.
Now that you guys vented your overclocking and Quadrant hate, back to the posting your overclocks!
*EDIT* Forgot to ask, does anybody know if there is an appreciable difference in battery life when overclocking at stock voltage? Theoretically, battery life should be the same no matter the clock speeds if the voltage is constant.
Click to expand...
Click to collapse
If you look at the overclock app it actually runs on medium volt. ..
SENT FROM THE DOG POUND
In other words if you set it at 1275 volts it's 1275 medium voltage.. Not 1275 standard volts... get it..
SENT FROM THE DOG POUND
xdadevnube said:
*EDIT* Forgot to ask, does anybody know if there is an appreciable difference in battery life when overclocking at stock voltage? Theoretically, battery life should be the same no matter the clock speeds if the voltage is constant.
Click to expand...
Click to collapse
That is not true. Transistors have different power dissipation when they are switching versus when they are not. The faster you clock them the higher the power dissipation even when the voltage to them is the same.
I can't believe how long it took for someone point out the DBZ reference on a message board filled with nerds.
I'm using AOSP+ ICS ROM with the latest Matr1x kernel. Whenever I try to OC to 1460 the phone freezes and I have to pull the battery, so I'm forced to run at a maximum of 1300MHz.
Also, on a related matter, is it good practice to use SetCPU with various profiles (battery<, temp>, screenoff, charging) for various frequencies? Or should I just use AOSP+ tweaks to chose a min and max frequency and let it be?
Thanks for taking the time to answer these.
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
My Phone freezes when i try to OC to 1460
Read the above comment or read my FAQ...god..
Lol
Sent from my Nexus S using XDA App
http://www.youtube.com/watch?v=DPclc3eKgiQ&feature=youtube_gdata_player
Sent from my Nexus S using XDA App
zgomot said:
Also, on a related matter, is it good practice to use SetCPU with various profiles (battery<, temp>, screenoff, charging) for various frequencies? Or should I just use AOSP+ tweaks to chose a min and max frequency and let it be?
Click to expand...
Click to collapse
If you are using deep idle you shouldn't underclock since it causes a race-to-idle condition. In other words your battery will drain faster. If you don't use deep idle, feel free to underclock when the screen is off or whatever you want.
sakisds said:
If you are using deep idle you shouldn't underclock since it causes a race-to-idle condition. In other words your battery will drain faster. If you don't use deep idle, feel free to underclock when the screen is off or whatever you want.
Click to expand...
Click to collapse
To the point and verry helpful, thanks a bunch
mathkid95 said:
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Can I do this via AOSP+ tweaks and still use SetCpu to OC and UC? Are they conflicting apps? (Deep idle OFF)
Sent from my Nexus S using XDA App
I would recommend just using setcpu
Sent from my Nexus S using XDA App
mathkid95 said:
Raise all voltages by +30 across the board
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Just an update, Using CNA 1.4.0 and Matr1x v17, I am stable oc'ed to 1460.
this is what I am running
1)800/1460
2)gov =Ondemand
3)Scheduler =Noop
4)all voltages to +30 (used the cna rom's voltage tweaker)
I tried ShadowGun: the Leftover.. and It was flying. Of course, make sure that have enough battery or that you have a charger ready. But finally it works, try this and let me know
I can run it for 10-20 min of usage then get a freeze. I never raised the voltages before though. It seems like its working for other people. And the actual developer of Matrix Kernel is telling you to ....
Nexus S (GSM i9020a)
AOKP (Build 25)
Eugene's Kernel (Speedy 7)
OC 800/100 (Lionheart)
Live OC (105)
It still amazes me how so many people that ask about overclocking have no frigging idea at all how cpus/gpus in general are binned etc.
I have a question. Why do you guys overclock that much? It might be snappy but battery life is just bad and it just doesn't worth it in my opinion.
Sent from my Nexus S from Tapatalk
albundy2010 said:
It still amazes me how so many people that ask about overclocking have no frigging idea at all how cpus/gpus in general are binned etc.
Click to expand...
Click to collapse
Care to shed some light for us people that have no frigging idea at all how cpus/gpus in general are binned etc? If not, well... why did you even bother posting?
ljordan2 said:
I have a question. Why do you guys overclock that much? It might be snappy but battery life is just bad and it just doesn't worth it in my opinion.
Sent from my Nexus S from Tapatalk
Click to expand...
Click to collapse
Personally, I do it because I can. Seriously... I'm a geek, I love gadgets and tech and I like to tinker.
On the subject at hand, I'm still unable to OC to 1460 (ARM voltages +30, INT voltages +25) but at 1300 it runs fine, no issues whatsoever.
i can run 1460 stable all day. bigxie/matrix. just did +30 to all the voltages above 1000. deadline and lulzactive..
If you are a geek you would know about something as simple as binning chips. Do what a tech geek would do...look it up. Same thing the op should have done with his ?. Hell mathkid has a answer to his ? In the op of his kernel thread. Which is the kernel he is running
albundy2010 said:
If you are a geek you would know about something as simple as binning chips. Do what a tech geek would do...look it up. Same thing the op should have done with his ?. Hell mathkid has a answer to his ? In the op of his kernel thread. Which is the kernel he is running
Click to expand...
Click to collapse
You're kinda bitter for someone married to a busty redhead
jesusice said:
You're kinda bitter for someone married to a busty redhead
Click to expand...
Click to collapse
Haha, I thought so too.
Sent from my Nexus S
As the title states, put up your dukes!
Running manually debloated stock odex'ed
0502 PBJ EXT4
Scheduler BFQ
Governer Performance
100Mhz-No UV
400Mhz-No UV
1000Mhz-No UV
1,400Mhz-No UV
There is still an annoying lag here and there but for the most part it rips!
Eclipse v1.4, FP1 radios, sio scheduler, smartassV2 governor, 0130 PBJ
Code:
1400MHz -> -50mV (don't typically use this one)
1300MHz -> -50mV
1200MHz -> -50mV
1000MHz -> -75mV
800MHz -> -100mV
400MHz -> -100mV
200MHz -> -125mV
100MHz -> -150mV
[edit: Forgot to add my governor. OP, you use performance all the time? How does that not destroy your battery?]
Tweaked v2
PBJ May EXT4
0-800mhz -100mv smartassv2 sio
Anything else?
Sent from my SCH-I510 using xda premium
Tweaked 2
Pbj 0502
Smartasv2
1200 - 50
1000 -75
800 -100
400 -125
200 -150
100 -200
Sent from my handheld Linux computer using electromagnetic radiation.
Cilraaz said:
[edit: Forgot to add my governor. OP, you use performance all the time? How does that not destroy your battery?]
Click to expand...
Click to collapse
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?
bwheelies said:
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?
Click to expand...
Click to collapse
No problems for me. And performance governor means the phone stays at max frequency all the time. You should never use it for real usage just for testing.
bwheelies said:
I have to give it a week or so to see how battery consumption is.
You guys' phones are so heavily undervolted.
No performance problems with that? Music playback difficulties?
Click to expand...
Click to collapse
Undervolting has zero to do with performance. The danger with undervolting is instability. If you undervolt too much, you'll crash because your CPU can't draw enough power to do an operation.
A certain CPU is able to do a certain amount of work in a given clock cycle, and that amount of work does not change in the slightest with voltage.
EDIT: Also, as JihadSquad said, performance keeps your CPU at 100% maximum clock speed at all times. It doesn't let it slow down. It is brutal on a battery for no real world gain.
Anyone notice when using smart ass governor it won't overclock to 1400 , it can over chick anything else but not 1400 for some reason so I have it at 1440
Sent from my SCH-I510 using XDA
And I'm using set cpu
Sent from my SCH-I510 using XDA
Ahh 1.5ghz is so smooth!, I'm running that from now on, it improves touch sensitivity
Sent from my SCH-I510 using XDA
juanzr1 said:
Ahh 1.5ghz is so smooth!, I'm running that from now on, it improves touch sensitivity
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.
JihadSquad said:
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.
Click to expand...
Click to collapse
I can only get 1300 on mine. 1400 randomly reboots on me after a while.
JihadSquad said:
Lucky lucky piece of silicon right there.
Click to expand...
Click to collapse
Or unlucky. At SetCPU's default for 1500MHz, it's running +325mV (+27.7%) from stock. So it's either really good silicon or a contender for a replacement in a few months.
Eclipse 2.0
CWM version 5.0.2.7
Baseband i510.06.FP1
Kernel 2.3.35.4-EP4-g311a209
Build SCH-I510.FP1
Lag is brutal sometimes. Speaker crackles and pops. Phone calls only last a couple minutes before the person on the other end can't hear me.
I am looking for a better solution. Any pointers would help greatly.
Oldtymehockey said:
Eclipse 2.0
CWM version 5.0.2.7
Baseband i510.06.FP1
Kernel 2.3.35.4-EP4-g311a209
Build SCH-I510.FP1
Lag is brutal sometimes. Speaker crackles and pops. Phone calls only last a couple minutes before the person on the other end can't hear me.
I am looking for a better solution. Any pointers would help greatly.
Click to expand...
Click to collapse
For one thing, you're running an EP4 kernel with a FP1 rom and radio. Install a FP1 kernel, either stock (http://forum.xda-developers.com/showthread.php?t=1582470) or PBJ (http://rootzwiki.com/topic/137-05-04-12peanutbutta-jelly-time/) and go from there.
shrike1978 said:
For one thing, you're running an EP4 kernel with a FP1 rom and radio. Install a FP1 kernel, either stock (http://forum.xda-developers.com/showthread.php?t=1582470) or PBJ (http://rootzwiki.com/topic/137-05-04-12peanutbutta-jelly-time/) and go from there.
Click to expand...
Click to collapse
I think I need to deal with the file system first. I have that discussion going in another thread.
Perhaps Odin back to stock and reapplying changes in order is in order.
JihadSquad said:
Lucky lucky piece of silicon right there. Mine can only get to 1400 and at 1440 it starts freezing sometimes, 1500 unusable.
Click to expand...
Click to collapse
Well 1500 crashed on me and 1440 was a little better but it also crashed
Sent from my SCH-I510 using XDA
What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium
wolverine38812 said:
What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Did you wipe cache and dalvik. I like doing it before and after flashing kernel and rom.... don't forget to mount system, if that does not do it mount everything.... post the steps you have used before so we can better help you.
Sent from my SCH-I510 using XDA
wolverine38812 said:
What's the highest anyone has overclocked?
IM running
Pbj 0130 kernel ( also I can't get the new kernel to install 0504, it boot loops when I try) any ideas?
Stock ROM
SmartassV2
Overclocked to 1.4mhz
Underclocked at 200mhz
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Try to fix permissions before leaving CWM. That has worked for some people trying to go back to stock.