Hi, I just registered here but i've been searching these forums for awhile.
I found few topics about this subject but i want to try one more time.
So, I have Galaxy tab 3 7", it had android 4.1 version but i updatet it to 4.2.2 and it works fine.
Im running blackhawk kernel and cmw recovery.
My question is there _any_ chance to get usb otg work. I mean i want to get usb memory stick access to tablet.
Its working in my galaxy s2 plus but not this tab.
s2 didnt need anything to do it worked right away when i connected it in with adapter.
I read about xml files, I copy few into /system/etc/permission, no help.
so is there any way to get this work?
Hmm, cant find any working thing.
Does any custom ROM helps with this problem or is it all about kernel or hardware or what?
I tried to install Rocket tab, no success. I guess i had wrong version of recovery anyway no system is stable so maybe no need for that.
But still the main problem, connect usb stick...
No one can give any information?
Okey, now i have rocket tab and its very smooth. Maybe I keep this one. Had JB 4.2.2 but my bt keyboard didnt work anymore,
not its working.
This is version 4.1.2 but well, its working so thats enough for me.
Its just saying cant find usb host. JB it found that but didnt still work.
Do i just have to give up and forget possible to use usb stick?
My 959V is rooted, had plenty of roms,ect over the last 3 years decided to do Gremlin remover and update it...,
Couple days ago upgraded to the "909" download of CM11,4.4.4, but every site I get it from gives me 908 (even though they all say 909) (last 3 digits of download version). The 908 will not recognize on my Win 7 laptop, but was fine up to now with previous cm11 same phone..
I have used the same cable for the last year for both my Galaxy and 2 Sidekicks phones, data and charging, now the Galaxy only charges, Windows detects but wont recognize, does on the sk4g's
Also (908) will not allow me to paste into sys/media with a " read only issue", although up to now swapped 15 different bootani without problems. Tried 3 different root file managers,same outcome.
Is the driver for the phone firmware windows looks for(on the phone itself) replaceable from sdcard? Im guessing its a bootloader issue and the 908 is the one not to of put on my phone.
Whats the probability I am getting the 909 but the 908 will not allow it to surpass it. Goes through the whole flash and on reboot I have to reenter emails,playstore apps,ect, but on 908 still in settings.
I can/ have been able to swap 1 rom via twrp and sdcard on 908 ( to slimkat4.4.4 and back to 909, but comes up 908) any other roms error before flash(and slimkat does not recognize on usb either).
is it a Kernel fix, and can it be flashed via sdcard? Bootloader via sdcard? Bad usb port? Does charge, and the drivers/ cable verified.
Thank you for any help, been 3 days now, redone my laptops (2) from scratch, everything ,c++,java,netframework,samsung,zadig 2.0, and more.
DId you do a clean upgrade (did a factory reset) before you installed CM11? If you didn't, go into TWRP and do a full backup (/system, /data) and do a factory reset, then boot up the phone and see if your computer will recognize it.
FBis251 said:
DId you do a clean upgrade (did a factory reset) before you installed CM11? If you didn't, go into TWRP and do a full backup (/system, /data) and do a factory reset, then boot up the phone and see if your computer will recognize it.
Click to expand...
Click to collapse
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.
Floridasun said:
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.
Click to expand...
Click to collapse
I didnt do a backup, if thats an issue , can I backup 2nd motherboard and apply to the first?
Floridasun said:
Yes, cashe,factory and davlik, before and after flash. I also have a 2nd motherboard,swapped them out and seen that it also is the 908 download but does recognize and allows me to ES Explorer swap boot animation. Im guessing I somehow erased the driver from the phone itself.
Ive done some Iphone jailbreaking unlocking for friends and found that a certain baseband (if I remember right 5.13.xx or 5.16.xx) would basically lock the phone unable to downgrade or upgrade and was to be avoided. Wondered if this a similar issue. (screwing up my bootloader)
What does windows look for via usb in the phone, adb,? Is it in the kernel and reflashable via sd?
I read also that the mini usb port can get bent over time and needs centering, tried that, cord fits better but not the issue.
Tried to zagdig the 2nd motherboard (worked) for drivers, but the 1st one still has error,device malfunctioned and cant be recognized by windows (7).
If i can get the Anton basic with a twist (no rom just the cm,I have it for Oden but wonder if Its possible cm flash)., Im good I believe,thats how I first rooted and got 4.3 cm,then 4.4.4, 908. Dunno,willing to try anything, not worried about it as I have a 2nd motherboard.
The rom is awesome, with no isuues except the battery stats vary. It says 3 hrs left then dies 10 min later, tried to erase the battery cashe in recovery but doesnt change anything. (related via usb?)
Thank you.
Click to expand...
Click to collapse
You can flash new kernels via recovery but it sounds like your issues are bigger than that. The fact that the 2nd motherboard is recognized via USB but not the 1st suggests that there's some kind of hardware issue. The drivers on your computer are working fine since the 2nd mobo is recognized, and so is your USB cable.
Why not just keep using your 2nd mobo? Is there something wrong with the 1st?
FBis251 said:
You can flash new kernels via recovery but it sounds like your issues are bigger than that. The fact that the 2nd motherboard is recognized via USB but not the 1st suggests that there's some kind of hardware issue. The drivers on your computer are working fine since the 2nd mobo is recognized, and so is your USB cable.
Why not just keep using your 2nd mobo? Is there something wrong with the 1st?
Click to expand...
Click to collapse
O.K., so Ive been playing with the second mobo just to test different angles.
1) E.S. File manager is the culprit, swapped out for a paid app Ive used with Sidekick 4g, Root Explorer, and boot ani. goes fine, on both mobos.
2) The latest gapps (cm 11 w/ gaps 4.4.x) was giving me a "Google servers cannot be reached" error on both mobos, used the gapps for cm 10.1 (jb 4.3) and all is working, both mobos.
3) Was reading that possibly the adb driver is in the kernel, and thats what windows is looking for? Ive tried but can only sd card flash at this point so, giving up. I can bluetooth,wifi share or email files to myself if need be. Im guessing its a hardware issue beings that the 2nd mobo was reflashed identical to to the first. (with exception of one click 2.3.6,and w/a twist oc/uv on the 2nd),1st one will not downgrade at all below 4.4.4 by sd, I was trying to ics a rom guessing the foundation might overwrite any missing stuff then upgrade back to 4.4.4.
One post mentioned that the mtd/bml cross flash is a no-no, could that mess up usb driver identity on the phones side?
Not a big deal, both phones/ roms are working great and have no issues (except 1 doesnt connect to a computer for file transfer). Thank you for your help.
Little early to ask but are you going to be in this forum long enough for lollipop to be ported? I would send you this phone for devving if you think you can get it to transfer files. Also need to get a lcd/digitizer, i have the rest of the phone.
Also, the phone was working fine up to about a month ago, it was recognized by the computer, only difference I made was trying apps, off playstore, five fingers for ebay,different weather apps for widgets,silver/gold prices apps. Thats when it started not recognizing.
I was getting the same error about the google servers, then I tried a earlier version of gapps. Connects now.
Floridasun said:
Little early to ask but are you going to be in this forum long enough for lollipop to be ported? I would send you this phone for devving if you think you can get it to transfer files. Also need to get a lcd/digitizer, i have the rest of the phone.
Click to expand...
Click to collapse
I have no plans to try a Lollipop port, this phone is almost 4 years old now. You might be better off sending the phone to @bhundven since I recently got two dev phones donated to me.
As far as the phone itself goes, the phone should be recognized even if there is no driver for it installed on your computer. You can use this software to verify that
http://www.nirsoft.net/utils/usb_devices_view.html
I don't believe you can even edit anything on the phone to make the USB device not be recognized when plugged in short of bricking your phone, so if there isn't even a USB connection being made, as I mentioned before, it looks like a hardware issue is causing your problems.
In that case, it'll be hard to flash anything without going through a lot of hassle since all the reliable recovery methods we have need that you are able to use your USB port on the phone.
EDIT
If you do still have TWRP available on the phone, flashing any ROM will reflash a kernel, but be careful because the recovery is tied to the kernel and some ROMs have a non-working recovery, so if you happen to flash some of these you'll be stuck with a nice paperweight . The latest CM11 I have posted does have a working kernel/recovery but I still don't think it'll fix your issue.
FBis251 said:
I have no plans to try a Lollipop port, this phone is almost 4 years old now. You might be better off sending the phone to @bhundven since I recently got two dev phones donated to me.
Click to expand...
Click to collapse
I'm currently looking into it, as well as fixing some issues with cm11. I have an SGS4G, so no need to send a phone.
Not just is it a 4 year old phone, but I am not sure how many people even use this as a daily driver anymore.
bhundven said:
I'm currently looking into it, as well as fixing some issues with cm11. I have an SGS4G, so no need to send a phone.
Not just is it a 4 year old phone, but I am not sure how many people even use this as a daily driver anymore.
Click to expand...
Click to collapse
I still use two of them. Great little phones really. I see no need or use for 5.0 I think running this CM11 from you guys is about the end of the road for these phones. A great ride indeed. Ill be sticking around regardless just to see what happens. Thanks guys☺
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .
Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.
After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow
Hey all,
My H60-L02 was running EMUI 3.1 B535 and i upgraded it to EMUI 4.0 6.9.1
It works fine and i installed TWRP 2.8.7.0 V5 which also works
but the second i try and root or sideload Gapps, it boots back into Android and its pretty corrupt, the launcher is just blank, but the lock screen, camera etc all work, i even managed to open the huawei app store and install apex launcher which works, but the whole OS freezes and is clearly corrupt.
I tried the downgrade method posted here but the recovery always freezes as 5% no matter what.
So im happy to make the best out of EMUI 4, just curious if anyone else has has this issue, also the multi tool seems a bit outdated for EMUI 4.0 support, is there somewhere else i can look for the latest OTA/TWRP/Gapps for EMUI 4.0?
Thanks
I managed to successfully downgrade back to EMUI 3.1
When it said to put the update on an SDCard, it meant a physical SD card
serpentxx said:
I managed to successfully downgrade back to EMUI 3.1
When it said to put the update on an SDCard, it meant a physical SD card
Click to expand...
Click to collapse
You can pretty much do anything Multitool does but manually.
Have you do factory reset after updating? It solves many problems.
zinko_pt said:
You can pretty much do anything Multitool does but manually.
Have you do factory reset after updating? It solves many problems.
Click to expand...
Click to collapse
yeah i typically do my own unpacking and flashing, i just use the multi tool for easy access to the correct versions of recoveries etc.
i should have tried factory reset, sometimes the best methods the most simple.
I have pretty much given up on EMUI 4.0, im back on 3.1 with B535 which is fine and stable.
Planning to get a new phone next month so i wont bother tinkering too much more with all this
serpentxx said:
yeah i typically do my own unpacking and flashing, i just use the multi tool for easy access to the correct versions of recoveries etc.
i should have tried factory reset, sometimes the best methods the most simple.
I have pretty much given up on EMUI 4.0, im back on 3.1 with B535 which is fine and stable.
Planning to get a new phone next month so i wont bother tinkering too much more with all this
Click to expand...
Click to collapse
Alrighty then. I just think it's a shame to give up on a firmware just because it seems unstable when it's not.
What are you getting?
Bit of a late reply i know.
I got a Xiaomi mi5 but returned it because i didnt realise how bad the camera was.
I have a google pixel xl now, and i was going to put my H60-L02 to good use and give it to my dad who has a galaxy S3, but a $5 sim adaptor destroyed the 4G sim card slot, so now i need to find a replacement board online
serpentxx said:
Bit of a late reply i know.
I got a Xiaomi mi5 but returned it because i didnt realise how bad the camera was.
I have a google pixel xl now, and i was going to put my H60-L02 to good use and give it to my dad who has a galaxy S3, but a $5 sim adaptor destroyed the 4G sim card slot, so now i need to find a replacement board online
Click to expand...
Click to collapse
eBay or AliExpress. Usually have lots of parts
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021
IMO you should contact developers of Bliss OS to get your issue fixed.
Recovering Spaghetti said:
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Click to expand...
Click to collapse
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
jwoegerbauer said:
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021View attachment 5799499
IMO you should contact developers of Bliss OS to get your issue fixed.
Click to expand...
Click to collapse
Hi,
The thing is I also tried DotOS & OctaviOS & the issue perseveres
vdun1188 said:
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
Click to expand...
Click to collapse
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Recovering Spaghetti said:
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Click to expand...
Click to collapse
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Recovering Spaghetti said:
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Click to expand...
Click to collapse
Understood. For some reason that is beyond my comprehension, it seems it is sometimes suggested to install stock and then a different custom ROM. Again, I don't know what it is actually supposed to do, as I've stayed with LineageOS to keep it simple. I'm not saying to stay with stock, just use it to get phone back to default, then start from there.
nuclear option..stock - hahaha )
Gawd Damit, I tried LineageOS too & a bunch of other stuff & it's always the same problem. I'm all out of ideas now.
Please help, Tried every ROM, same result, doesn't boot
Hi, I've got a Samsung Galaxy A10 SM-A105F and I tried installing all kinds of different roms on it and they install just fine but then when i go to boot to system I end up in this hell hole of perpetual booting and restarting. I've been at it...
forum.xda-developers.com