Related
I have successfully downgraded my rc33 g1 to rc29 and i have managed to unlock and activate it. I was also able to update it to rc33 using jf's update. All was good until yesterday for some reason i wasn't able to download from the android market anymore so i decided to restore to factory settings! so i thought i'll just repeat the whole process again but i was wrong! I was able to downgrade to rc29 again but my computer doesn't recognize my android anymore! i tried <enter>setprop persist.service.adb.enable 1<enter> multiple times but my pc is just not recognizing it! <enter> reboot <enter> works as expected but for some reason i cant make my computer access my android. I checked my hardware settings and there is no HTC dream device there anymore. When i plug my android to the USB it's just charging! Anybody help please
Make sure your phone wasnt auto detected as usb mass storage device. if you are running windows. go to the device manager. open up the section. then watch closely as you plug your phone in. if you see a mass device show up, you need install the android usb drivers.
I have been looking into that closely but for some reason it's not acting up the way it used to. When i first got the android i was able to see that usb device at the device manager. I've tried doing so in different pc's and operating systems ( windows xp , vista64 and 32 ) but it just wouldn't load. It's charging though but the device just wont get recognized.
kinda a dumb suggestion but when u plug g1 into comp are u mounting it from the g1??(notifcation that comes up) again i kno thats something stupid...
I appreciate your post bladepbc i don't think it's a dumb question. I cannot mount the SD since i am locked in the activation screen. Thanks for trying to help mate! cheers!
Try a Linux operating system. If it works there, you have a Windows problem.
Thank you for trying to help. Are you sure about linux i'm a little skeptical, because it worked with vista64 before i don't understand why it's not working anymore after factory reset. Thanks!
anyone? please? Jesusfreke please help me!
Really? Am I missing something? Activate, then mount. Put the files on sd, go blue team go.
Hello disonance i can't mount since i have to go to activation again :| <enter>setprop persist.service.adb.enable 1<enter> isn't working
mods, this thread needs to be closed/locked/ patmagpantay has started another one of these with the same issue.
patmagpantay - if you have JF recovery console flash ADP1.1 update, you can skip initial activation login - then connect to wifi - then open a google app (Gmail market, calendar etc.) you will then be prompted to activate (over wifi)
yeah, this other cross-thread is here:
http://forum.xda-developers.com/showthread.php?t=493324
My apologize I din't mean to offend anyone. Again i'm sorry.
korndub said:
mods, this thread needs to be closed/locked/ patmagpantay has started another one of these with the same issue.
patmagpantay - if you have JF recovery console flash ADP1.1 update, you can skip initial activation login - then connect to wifi - then open a google app (Gmail market, calendar etc.) you will then be prompted to activate (over wifi)
Click to expand...
Click to collapse
Thank you for your reply! I now think that there is hope for my android! Where do i get this sir? and how do i do it? Thank you so much!
I have a rooted Nexus 5. MTP and PTP refuse to work. Doesn't matter how I install/remove drivers or anything. I've tried every trick on the internet and no avail.
The PTP storage used to work when I didn't have root, so what's the deal?
Could this be due to my rooting process? To be honest, I don't remember how I rooted. I'm new to the Nexus scene, having come from a samsung device.
However, I was just having this issue with my older E4GT (GS2 variant) when running rooted/custom roms.
Now, I have a friend with a S4 who decided to get rooted/custom roms and is now having the same issues, except before, both his MTP and PTP worked!
I'm lost and losing hope for this stuff.
aaa12585 said:
I have a rooted Nexus 5. MTP and PTP refuse to work. Doesn't matter how I install/remove drivers or anything. I've tried every trick on the internet and no avail.
The PTP storage used to work when I didn't have root, so what's the deal?
Could this be due to my rooting process? To be honest, I don't remember how I rooted. I'm new to the Nexus scene, having come from a samsung device.
However, I was just having this issue with my older E4GT (GS2 variant) when running rooted/custom roms.
Now, I have a friend with a S4 who decided to get rooted/custom roms and is now having the same issues, except before, both his MTP and PTP worked!
I'm lost and losing hope for this stuff.
Click to expand...
Click to collapse
Is the device showing up under Device Manager (which would indicate that the driver is installed--see #2 here)? This is not a "root" issue. I've run rooted devices for over three years and have only had the problem in the early days with the Pandigital Novel. Have you used USBDeview to look at what you have for USB drivers and to make sure all drivers are being removed? Try another cable and another usb port. Some cables don't handle data, they just charge; cables are a variable in the process.
ritchea said:
Have you used USBDeview to look at what you have for USB drivers and to make sure all drivers are being removed? Try another cable and another usb port. Some cables don't handle data, they just charge; cables are a variable in the process.
Click to expand...
Click to collapse
Yes, I've tried all three of those things. This seems almost to be mission impossible.
I am running rooted stock and my friend is running a new rom altogether. using different computers, but getting the same issue.
See, while I can get Fastboot and ADB to work without a hitch, I can't get PTP or MTP working AT ALL.
ADB and Fastboot seems to be the only thing people are focusing on, and that's not my issue... so It's even harder to find solutions online
aaa12585 said:
Yes, I've tried all three of those things. This seems almost to be mission impossible.
I am running rooted stock and my friend is running a new rom altogether. using different computers, but getting the same issue.
See, while I can get Fastboot and ADB to work without a hitch, I can't get PTP or MTP working AT ALL.
ADB and Fastboot seems to be the only thing people are focusing on, and that's not my issue... so It's even harder to find solutions online
Click to expand...
Click to collapse
So it does show under device manager? Have you right-clicked and updated driver? Step #2 in the link pointed to USB drivers rather than adb. Yes, adb Is the usual culprit, but I've seen quite a few reports of your problem lately. Usually, removing the drivers and allowing the PC to reinstall works. Have you tried wireless to transfer files--at least a temporary solution?
If you're interested (desperate enough) to do a factory reset, I'd recommend WUGS toolkit. It will wipe do backup everything. Revert to stock and unroot. Then root and install custom recovery.
Sent from my Nexus 7 using Tapatalk 4
Happened to me when i rooted the device with wugs. I think because I used the RAW drivers. Just uninstall adb android driver from device manager and all the other drivers that resembles the nexus on usbdeview, reboot . Then put again the usb in the pc , and you are ready to go
ritchea said:
So it does show under device manager? Have you right-clicked and updated driver? Step #2 in the link pointed to USB drivers rather than adb. Yes, adb Is the usual culprit, but I've seen quite a few reports of your problem lately. Usually, removing the drivers and allowing the PC to reinstall works. Have you tried wireless to transfer files--at least a temporary solution?
If you're interested (desperate enough) to do a factory reset, I'd recommend WUGS toolkit. It will wipe do backup everything. Revert to stock and unroot. Then root and install custom recovery.
Click to expand...
Click to collapse
I have tried that too, but I end up with the same outcome. Same drivers I would normally have installed and give me no recognition of the device for file transferring.
Fortunately, knowing how this goes down, as it has happened before with me and my S2, I'm not desperate enough to factory reset. As I would ultimately reach the same issue.
I've been interested in wireless file transferring, but I much more prefer not having to upload the file to something like dropbox or manually setup a server. I'm more into the press-and-go (similar to the plug-and-go method... haha, get it?... made a funny there cause it relates to a cord ordeal) routine.
I haven't actively searched that route yet because I'm in hopes that there is a fix for this problem. I'll get to it if there really is no other choice. So, if there is a program that will allow me that ease of access, I'm open to suggestions!
AkaGrey said:
Happened to me when i rooted the device with wugs. I think because I used the RAW drivers. Just uninstall adb android driver from device manager and all the other drivers that resembles the nexus on usbdeview, reboot . Then put again the usb in the pc , and you are ready to go
Click to expand...
Click to collapse
Seeing this makes me question whether I'm confusing the purpose for each of these drivers or you haven't read what I wrote. However, our circumstances differ. I didn't root through conventional means of the toolkits, I just came across it through my search for driver issues. I have tried the method you are suggesting, as the toolkit driver installation steps take me through that step before I do anything else; but this doesn't work. I end up with the same outcome: Device is recognized and drivers are installed (if I allow windows to automatically search for them), but no PTP or MTP for any file transferring.
ok, silly question : Is it enabled on your android phone? under memory ->tap the 3 dots and you will see mtp/ptp try to uncheck and check.
Otherwise I don't really know anything u could do about it.
By using the NRT or toolkits to root, all of the pc's usb drivers were deleted and new/generic/universal ones installed to re-install custom recovery & achieve root. Go to Control Panel on the PC, do you see Portable Devices listing including the Nexus 5 ? Most likely, no - only Android Interface.
A simplistic approach that worked for me is to roll it back - if you are using PC running Windows OS, use System Restore to go back to a previous state to an earlier (earliest possible) time before - with the N5 disconnected. When the PC is restored, turn OFF USB debugging on the N5, connect via the OEM N5 cable - it should be recognized, then turn ON USB debugging if there are missing drivers - let Windows search & install.
At some point, N5 will be recognized as a Portable Device along wit Android Interface, and "Auto Play" would pop up, with full access to all the SD folders & files. Toggle MTP and PTP if necessary as it might install more drivers - you should be good to go.
Reboot the PC just to reconfirm that everything is back to normal, connect N5 and profit - enjoy.
If this work, please share & if it doesn't - please comment what didn't work.
The simplest and shortest way to connect google nexus5 with PC as MTP(Media device)
When I plugged it, there wasn't any yellow exclamation mark within Device Manager. So for me, the drivers were OK. But the device was not listed within my Eclipse DDMS. After a little bit of searching, it was just an option to change in the device settings. By default, the Nexus 5 USB computer connection is in MTP mode (Media Device).
What you have to do is:
Unplug the device from the computer
Go to Settings -> Storage.
In the ActionBar, click the option menu and choose "USB computer connection".
Then select Media device(MTP) or Camera(PTP) based on your requirement...
Plug the device and you should have a popup on the device allowing you to accept the computer's incoming connection..
I hope this will help!
Wow the threads make it look so easy but here are my steps so far and I'm a couple hours into S-Off but had to go through all this stuff (The basics I guess but this is my first time on android 4.4 so I was pretty lost.
1) First I found the XDA Developer link here which has a QR code to scan to download the file.
2) Realized I did not have a QR Scanner installed so I installed google goggles.
3) Scanned the code and realized it did not work and simply takes me to the xda developers forum
4) Searched for another link and found this one http://dottech.org/156395/how-to-roo...verizon-guide/ (This QR code works)
5) downloaded and installed the weaksauce exploit.
6) Decided I will backup my data on the phone before continuing .
7) Installed titanium backup
8) Was told to enable USB debugging
9) Found this can only be enabled if your phone has development mode enabled.
10) Searched for how to do that on this newest version of android and found this link. http://www.pcadvisor.co.uk/how-to/go...formance-mode/ which I was able to figure out the exact steps for the M* on my own.
11) In the newly unlocked developer options from the enabled USB debugging.
12) Titanium backup reminded me I do not have the paid version (but I do own a licesnse!) Need to copy the license file to the SD card.
13) Realized I don't have an external SD card installed.
14) Searched the house for a paperclip to pop out the SD card slot, no dice... Found a needle and trimmed the head off it with wire cutters, and popped out the door.
15) Installed the SD card!
16) Titanium backup says it cannot write to the external SD card (Well this is where I like to keep my backups not on the internal Card....)
So Starting from 18 how do I:
1) Use titanium backup to backup to my external SD card (No write permission). I have tried the SDFix application and that did not work. How do i get write permission to backup with titanium backup?
2) Where do I download the HTC M8 Drivers?
Ok so I guess I cannot backup the phone, lets say I will just skip the backup.
I'm trying to S-Off using the weaksauce method. I go to the folder where I downloaded firewater and type adb reboot and I get a message that my device is unauthorized..
What now?
Did you look here ? http://forum.xda-developers.com/showthread.php?t=2708628
Works great.
You can just use internal storage for your backup, once you get the phone s offed . Then do a backup to the external sd card. You need root access and a kernel without write protection. Take your time, it'll work.
Sent from my Nexus 7 using XDA Premium 4 mobile app
I would recommend watching some of these videos, they are very helpful.
http://forum.xda-developers.com/showthread.php?t=2697957
+1 on the videos well worth watching!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Did you get it figured out? If you didn't and still need some help, send me a PM and I'll walk you through step by step and help you get it done. I've walked three people through the S-OFF method now (using Teamviewer and chat) and am getting pretty efficient at it. Shoot me a PM if your still stuck.
Watch this...
https://www.youtube.com/watch?v=sLtmwN1UyUU
I'm having the exact same problem. I rooted the phone thinking that's all I'd need to do. But with TiBu I can't backup to my SD card. So now I'm trying to do the S-Off so I can solve that problem. But I can't get the adb to work either.
I installed the HTC Sync Manager "package" from HTC, which allegedly comes with the driver. But, when I plug the phone into the computer it doesn't even see an adb device for my phone. I'm familiar with adb devices because I used it on my Droid Bionic.
Then I downloaded what has been nicknamed the "HTC One Toolkit M8" and installed the "Universal Adb Driver" from that. Still, no adb device is detected. Frankly, I'm laughing and disgusted with this phone. I'm laughing because someone with my prior skills with android should have no problem with this. But disgusted because this phone has been the most counter-intuitive phone I've ever owned. Just trying to disable the lock screen took almost 30 minutes.
Anyone know what I'm doing wrong? When I plug the phone in right now it shows up under "Portable Devices" and that's it. My Bionic would pop up 3 devices(CD-ROM, media device or something of that sort and the adb device).
I've literally spent the last hour searching with Google trying to figure out what I'm doing wrong. I thought it was a driver problem, but now that I'm not seeing any "unknown" devices nor am I seeing the adb device I'm convinced I've screwed this up somehow.
Yay me. I can't find my old account info, so 1 post for me.
Edit: Also, after installing the "Minimal ADB and Fastboot" as well as the Android SDK, the command "adb devices" has never found my phone. LOL
Just an FYI...the tool to open the SD card slot comes with the phone. It's the metal piece with the HTC logo in the packaging that the manuals come in. You'll have to pull that part of the box apart to get it out.
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Pauls57 said:
It was suggested to first install htc sync manager with the drivers, then uninstall sync manager, but leave the drivers installed. Try that.
Click to expand...
Click to collapse
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
robocuff said:
Also, if you have any other type of phone software such as pdanet installed on your computer, either uninstall it or close it before trying to run the exploit.
Click to expand...
Click to collapse
I don't. I haven't gotten that far since I haven't gotten s-off done.
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Joshy8 said:
Yeah, I did that already. I'm convinced this isn't a driver issue since I never actually see the adb device(or an unknown device) in my device manager.
I don't. I haven't gotten that far since I haven't gotten s-off done.
Click to expand...
Click to collapse
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
robocuff said:
Are you using a USB 2.0 port on your computer. USB 3.0 will cause problems with ADB. What operating system does your computer have on it? Windows 8 doesn't seem to get along well with ADB either. Seems to work for some, and not for others.
Click to expand...
Click to collapse
Windows 8 doesn't have any problems with adb. I've used it flawlessly on several computers. USB 3.0 neither. USB 3.0 can however cause problems with Firewater running correctly.
nicholi2789 said:
That just seems to me that it IS more likely a driver issue. You should see your device name or at least unknown device. Open up your device manager, then unplug your phone and replug it in. See what it shows when it refreshes. It will be under portable devices or Android USB devices or both. Mine shows both. If you still need help shoot me a PM and I can walk you through.
Click to expand...
Click to collapse
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know, I have had lots of driver issues on lots of devices and had to sort it out many times. Most notably was my Nexus 7 that thing was the hardest device to get drivers installed for, it took me hours. I've gotten pretty dang efficient at installing drivers nowadays though. I need more specific information about your set-up before I can really offer good advice though. The HTC Media Cd rom that you see pop up when you plug in is the CDROM.iso. It's just stupid HTC bloatware crap, you can disable it or delete it once you have root. When you plug it in you should see the CDROM popup on your desktop then it should mount as MTP too. You should be able to browse your internal and external storage.
One thing I would suggest though and you may think i'm crazy for it.. Swap the USB cable your using for a different one and try that on a different usb port. I've messed around trying to get drivers installed for hours, only to switch the USB cord and have it work just fine. I've even had this problem with brand new USB cords.
If you do still need help tomorrow don't hesitate to shoot me a PM, I would be glad to help.
Joshy8 said:
Right, you just argued why I don't think it's a driver issue. I've played with ADB before. I plug my Droid Bionic in and ADB comes right up on my desktop. On my HTPC that doesn't have the driver installed I get an unknown device.
But, with my HTC One M8, I never get any ADB device or an unknown device.. I get the HTC media device or whatever it is(mounts the storage on the desktop0, but I have *never* seen an ADB device or an unknown device from my HTC One M8... ever.
Thanks for the offer of the PM. I'm going to bed since I'm only 3 hours past my bedtime. But I'll PM you tomorrow and hopefully we can figure this out.
Click to expand...
Click to collapse
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
hager03 said:
I don't know if this will help but I see you typing in adb device, it must be adb devices you must have the s.
Don't ask me how I know.
Click to expand...
Click to collapse
Haha. I wont' ask. Thanks for the tip, but I am doing adb devices. It comes back and says something like "List of devices found" or something and then is blank. Of course, it works just fine on my Bionic.. haha. It's always listed.
This is going to be a silly question, but did you turn on USB Debugging in the developer options? Does the phone say USB debugging connected on the phone's notification tray?
You should either have unknown device or you should see it listed properly in device manager.
I would go through device manager and uninstall any devices related to the phone. When prompted I would also remove the drivers. Then follow the below guide.
http://forum.xda-developers.com/showthread.php?t=2742295
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
ericdg said:
Firstly, thank you for this great forum! I've already found a lot of great info on here, and love my new phone. I was trying to get drivers on my PC to start rooting my phone, but now that I can't even do that, I'm unsure that I should even be trying to root at all. Most, if not all of the driver's links that I've found here are dead so I tried a few other methods: Plugging in the phone after selecting USB debugging. Windows searched for drivers automatically, but found none. Downloaded HTC Sync, but it doesn't recognize my phone. I'm confused because I was already able to transfer my mp3's to the SD card via usb, but otherwise it seems like my phone isn't recognized.
My HBoot is the 1.45.0013, so I take it that it can't easily be turned S-off, but I probably don't need that anyway for what I want. I simply want to be able to remove all of the bloatware, and have access to functions like CPU control. For just that, I think that rooting while S-on will be fine?
I know that this is an old phone, but I bought it because the specs are still quite good, and I was able to get it brand new on Amazon for a song...............I would hope that there are at least drivers still available for it. Thanks for any help in advance!
~E
Click to expand...
Click to collapse
ADBSetup will get you the drivers you are looking for:
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Worked for any Android phone I tried.
Thanks, I'll give that a shot and see what happens!
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
ericdg said:
Okay, I installed the driver from ADB, but still can't get HTC Sync to work...........................from reading other threads, it sounds like that's a common issue, though. Is there any way to confirm that I have the drivers installed? Under "devices and printers" on my PC, it will recognize an android phone when the phone is set to disk drive or charge only, but not USB tethering. When I switch the phone to the tethering option, the phone's icon on the PC moves from devices to unspecified. Then when I hover over it, it says there's no drivers. Again, I'm in debugging mode and have already copied MP3's to the SD, but I'd just like to confirm whether or not I have the needed drivers before starting the root process.
Thanks,
~E
Click to expand...
Click to collapse
Easiest way to tell is open up a command prompt in the folder that adbsetup installed to (C:\ADB I think) and type:
Code:
adb devices
If all is well, then the device will be part of the listing.
Thanks Joel.............I think it worked.
The ADB command came back with:
List of devices attached
HT22_______7 device
That's not a number that I've ever seen associated with my phone, but I assume that's it.
Confirmed.................I was able to reboot the phone by ADB!
Excellent! This will also mean the fastboot commands needed to unlock your bootloader will work too.
.........one would think so, Joel, but I can't get fastboot to do anything. ADB recognizes the phone, and will reboot into bootlocker, but once there it'll do nothing. Windows pops up a message shortly after bootlocker opens that says something to the effect of "there was a problem with USB device not recognized". I tried the command "fastboot devices", but got nothing. I know that I'm darned close, and it's probably something simple, but just can't get it to work. Maybe I need additional drivers for fastboot, or need to move it to another directory?
Thanks,
~E
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
joel.maxuel said:
Interesting. Try this:
Go into fastboot mode on the device, with the USB cable plugged in. On the computer, open up device manager. What is read for Android Device? Is there a noted problem with the driver? Open the properties for that device, and select Update Driver. The search process should find something appropriate now (as ADB Setup saves the drivers in the system32 folder - I think).
If not, what kind of user did you run ADBsetup as? If it was one without admin privileges, try installing again as admin (this allows the drivers to be saved where you want them to be).
If there are still problems, unfortunately I cannot think of anything else.
Click to expand...
Click to collapse
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
ericdg said:
I'm almost sure that the problem lies with the drivers now, but just don't know how to fix it!?! In device manager the phone moves into different categories, depending on the connection type; Charge only, and disk drive both work fine, but the icon for tethering shows no drivers installed. After rebooting into bootlocker the phone automatically switches to tethering, so I assume that's needed for getting root. I can't install drivers when the phone's in tethering from device manager, with either auto or manual. It just won't take! I've tried re-installing HTC sync, removing and re-installing multiple driver files, and the phone's just not being recognized. The sync instructions say that it should be a connection option on the phone also, but I've only ever seen the three: charge, disk, and tether. As for user, I'm pretty sure that I did install ADB as admin...............not sure how to check for that now, but the drivers are not in system32 like you mentioned; they're in program files (x86). Maybe the location of the drivers is the only problem I'm having, but I don't know where I want them to be? I hate quitters, but soon I'll just be enjoying the stock ROM for the best of it, if these problems persist!
Thanks,
~E
Click to expand...
Click to collapse
Dont know where you got your HTC drivers, but you should try the ones in this post (step one - hopefully its still live - if not I can dropbox it for you):
http://forum.xda-developers.com/showthread.php?t=1801106
Sent from my LG-D520 using XDA Free mobile app
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
ericdg said:
You're awesome, Joel!
That is the thread that I've been using predominantly, but I found that link to the drivers dead. I sourced them elsewhere, but couldn't really say where exactly since I've tried so many now. If you could dropbox for me, I'd really appreciate it.
Click to expand...
Click to collapse
Uh-oh. Either the link was dead when I went through this process back in April, or I had bad organizing skills at one point and didn't put the file in the Doubleshot folder before completing a purge. Either way, I don;t have the file.
Nor did I really need it. The second Doubleshot I rooted I ended up using it in my native Linux environment (no drivers needed), vs my Windows XP emulated through VirtualBox. That's what you could do. Get a live Debian DVD (Im like the XFCE desktop version), boot in, get fastboot:
Code:
sudo apt-get install fastboot
And then use fastboot:
Code:
sudo fastboot ...
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
ericdg said:
Thanks for the link and instructions; I'll probably not be able to try this for a couple of days now................just super busy, but I'll let you know how it went (or, more likely, have questions)! Any linux stuff is completely foreign to me, but it looks fairly straightforward. One question about the link that you provided, though: It looks like an index of a lot of individual files that I'd need. Under the parent directory, the folder named "iso-hybrid/ " is what I want, correct? I do really appreciate your time and help, Joel.....with as many dead links and outdated drivers that I've found, I don't think I could've got root otherwise!
~E
Click to expand...
Click to collapse
Just need the one. My recommended file to download is this:
http://cdimage.debian.org/debian-cd...ybrid/debian-live-7.6.0-i386-xfce-desktop.iso
Burn the image (not the file) onto a DVD (can be a rewritable) and reboot with the disc in the drive. Once it's fully loaded, you can either enter commands by clicking on the "terminal" icon on the bottom of the screen (preferred), or press Ctrl + Alt + F1 to get a prompt (may have to log in as "user", there shouldn't be a password). Hope this helps.
I was messing with my galaxy core prime (android 4.4.4) using a app to remove system apps that you can't with the stock app manager.. (no reason for crap like smartcard manager, bluetooth, wifi sharing..etc to be running when i haven't authorized such things, seems like security risk imo)
Was also editing the autorun list and messing with Norton applock and phone encryption settings to try to further secure it.
Welp, I f'ed things up because phone crashed and now can't do anything.. can't access home screen, settings, call/txt, nothing. So I booted into the stock bootloader and tried formatting the entire thing including cache..
Didn't fix the problem, can't finish the setup wizard without it crashing, get message saying setup, hangouts, and keyguard stopped working and then my phone bricks and can't do absolutely anything. No backup either.
I have been googling and googling for solutions but everything I read says to either:
-Reformat from bootloader (tried a 100 times)
-Wipe with TWRP or CWM (don't have either and can't access play store)
-Use Kies (won't detect my device since I can't enable MTP)
-ADB sideload twrp or cyanogen (cant, usb debugging probably not enabled since I formatted and no way to enable it since setup of android fails)
Odin can't detect anything either.. probably due to same reason. (Cant enable MTP or usb debugging)
So am I totally screwed? What are my options here?
I noticed the stock bootloader has a option to install from external storage.. can I put my sd card in a phone that does work and download twrp, cyanogenmod, (or ANYTHING else to fix this) to that, then put it back in my bricked phone and re flash it that way? That way I wouldn't need mtp or usb debugging... or won't that work?
Wasted so much time trying to fix this guys, googling and even formatted my pc removing Linux and reinstalling Windows hoping suddenly my pc would detect it.. atleast on linux when I used "adb devices" command it detected my device (trying to sideload anything didn't appear to work though, phone says error about verifying it and tries again and says completed and reboots but no sign of the rom I just supposedly sideloaded anywhere)
removing Linux and installing Window seems to have been a mistake because on windows using "adb devices" returns a blank list.. Tried different cords, ports, kies 2 and 3, reinstalling drivers, disabling firewall..etc but like I said even if I do get adb to detect it, what can I do from there without mtp or debugging?
Sorry for wall of txt, just want to be descriptive as possible so I don't get all replies telling me to try stuff that I've tried 100 times or just flat out won't work for my particular problem because of the above reasons..
will be sincerely grateful to anyone that took the time to read this and try to help me.