Well today i had everything setup like i wanted. I had JFv1.41 rc33 version install on my g1 and a custom Theme. I wanted to switch my them for a new more looking one. So i download a new custom and install it. to my surprise i install an old them which i install. Boot the phone and got the T Mobile G1 logo and that it i get stoke there. So here why i made this tread to tell JesusFreke in the next or when ever he could add a USb toggle in recovery mode. I am stoke with this till 2 days. This will help allot of first g1 noob. Thanks for your time.
ok
A: next time make sure you download a theme that works with your version of JF
B: why didnt you put this under JF's thread?
C: if you have an update.zip(or something that can be renamed and used as such) you can go to the recovery console, type "mount sdcard", then use the basic linux commands to put it on the top directory of the sdcard and restart and load it up, thus fixing your phone. If not, you should keep on somewhere on your phone just in case such a need arises
[email protected] said:
ok
A: next time make sure you download a theme that works with your version of JF
B: why didnt you put this under JF's thread?
C: if you have an update.zip(or something that can be renamed and used as such) you can go to the recovery console, type "mount sdcard", then use the basic linux commands to put it on the top directory of the sdcard and restart and load it up, thus fixing your phone. If not, you should keep on somewhere on your phone just in case such a need arises
Click to expand...
Click to collapse
So you want to be a smart ha here i go.
A) People can make mistake
B)I did that because i wanted to make Jf read this thread and it will help people like me who don't really have the knowledge on using Linux easy.
C)I don't really know that much of using linux like u.
I'm sure many people send JF many PM's wanting the same thing as you do. Do you think he has the time or want to answer a question that someone else might be able to answer?
Making mistakes is something you need to be more careful about. Having root means the phone will let you do whatever you want. This means safety features that are made to protect you from yourself are not active. Read about what you are doing before doing it. That is the message n00bs need to be given.
Put the sd card in your computer, place the .nbh file on it, reboot into bootloader and downgrade your phone. Then work your way back up to JF 1.4x and read more carefully before you install themes. I know my way around the G1 very well (if I dont say so myself) but I still do not install themes. They are nice, but they are not at the point where installation is as easy or system friendly as they could be.
Blue*lable said:
C)I don't really know that much of using linux like u.
Click to expand...
Click to collapse
I've never really used Linux myself, as it seems more complicated than it's worth most of the time, but I've had no problems so far using a rooted G1, or installing custom firmwares, etc. I haven't tried themes, but from what little I've read into it, not only does it seem fairly straight forward, but I've also noticed quite a few of them warn the user that they need to be running the Lite version of JF 1.4x before they install a theme because otherwise there simply isn't room. That said, it's not up to JF to babysit everyone that decides to delve into the unknown.
I dont understand what your problem is,
if u dont know about linux buy an microsd to SD adapter, extract microsd from your phone and use a computer to copy JF's latest update.zip to your card and then upgrade usual way
what is the problem?
JesusFreke if your reading this I just wanted to say "Hi" and "Thanks" and ... and.... Ummm ...
Everyone in here relax.
Try not to direct threads to a specific person. This is a developement thread. You want a specific someone to read something, send them a PM. If you are lucky he will read it, if he doesnt have them turned off.
Im trying to get someone to help walkme through the rooting process of a motoactv watch that I received for christmas. The device was recently rooted, and it appears that the process is fairely easy. I have limited rooting experience with android phones, and have jailbroken a few iphones, but have never had to mess with command lines, or adb. If someone is willing to walkme through the process on here I will be more than willing to make a modest paypal donation to them (we can discuss payment terms.)
I have posted the link website below for the rooting procedure. Also note that I am only interested in doing this as long as the core fitness apps and capabilities of the device arent completly destroyed, as this was a gift from my girlfriend and it needs to function in a fitness capacity. Im thinking that they shouldnt be affected, and that I probably will only gain the ability to delete them, but I could be wrong. I am also trying to learn from this expereince and am willing to pay if necessary to do so. Thanks so much, and hope everyone has a happy new year.
http://www.cmw.me/?q=node/55
I have one on order. I thought the process was pretty straightforward. It is easier on a Mac or Linux as there are scripts that use zergrush already available. If you are unfamiliar with using the command line I would recommend finding someone else to root it for you.
I am rooting mine for Google music and adding watch faces but I am kind of tickled by the idea of watching NetFlix on a wristwatch.
Cheers,
-M
XDA member since 2007
Hi
I already rooted the MotoACTv that I have. But I am having problems installing the Google APPS zip file downloaded from the cynagoen web site. Can some one explain how to install this so I can get the Market up and running on the watch. I already installed other apps like pandora and they work. Only thing is that I installed this with adb install command and not the via the market. Would love to have the market working. Please help.
rdavidowski said:
Hi
I already rooted the MotoACTv that I have. But I am having problems installing the Google APPS zip file downloaded from the cynagoen web site. Can some one explain how to install this so I can get the Market up and running on the watch. I already installed other apps like pandora and they work. Only thing is that I installed this with adb install command and not the via the market. Would love to have the market working. Please help.
Click to expand...
Click to collapse
If you downloaded the gapps from cyanogenmod as you should have, you need to adb push everything that isn't an apk.
There are a few libraries that need to be installed. adb push filename /file/location/name is the way to do this. The locations match the unzipped folder names.
Cheers,
-M
XDA member since 2007
I also need step by step directions please, bricked my watch
I tried to follow the directions and I finally got the phone to root. Then when applying the new interface it must have not liked the commands I was trying to use.
Can anyone give step by step directions. It took me about 2 hours to figure out what applications I needed and how to use them so I am sure others would benefit from this.
The directions on that original post was way too vague for us noobs
Hardcore73 said:
I tried to follow the directions and I finally got the phone to root. Then when applying the new interface it must have not liked the commands I was trying to use.
Click to expand...
Click to collapse
Oh, no... Are you sure your watch is bricked? That really is awful... I thought mine was for a bit after I used Super One Click to root it, but I was able to recover it by holding Start + Power for 10-15 seconds then plugging it in.
It seems zergRush is safer -- I ended up with root after that, but a couple of others in the #motoactv channel on freenode tried it and ended up with the phone seemingly dead (though a start+power off like above fixed it) and without root.
I posted this in the other thread but I am impatient and figured it wouldn't hurt to ask here too so,
moonzbabysh said:
Okay so last night I attempted to root my motoactv but my adb for some reason say it cannot load the root.img, I had the same problem where it's couldn't load the recovery.img for my photon when attempting to apply CWM or twerp recovery. Fastboot devices definitely sees both my devices (no I didn't do them are same time, and the files needed are in the same file location as instructed) and I can even Fastboot reboot and have that work. Any ideas or suggestions?? Any help would be appreciated.
Click to expand...
Click to collapse
Your system.img is defunct. PM me or come in IRC and I'll send you the links for them and more.
Sent from my Galaxy Nexus using Tapatalk
MOTOACTV update without Windows
I'd like to root my MOTOACTV. My clock is running version 4.53.50. To root I had to update at least to version 4.55.78. I found the file delta-ota-Blur_Version.4.53.50-4.55.78.Motorola-F100.Retail.en.US.zip but I've no idea how to flash that to my clock without Windows.
Any ideas?
Thanks.
This is my first post here so please don't hit me if I am doing something wrong.
Hi, everyone
I hope that I am in the right part for posting? I am new to this android thing.
I am trying to find a how to root idea usa 7" tablet from fry's for $77.00. Their is a lot of rooting programs but I have not been able to find anything on this model.
Also what would be a good rom to flash it with? I tried finding out if uberoid and cyanogenmod would work but I could not find any info on this model.
Not to sure what model I have that I would be able to flashing this rom with, either uberoid or CM7? Help
Model: MID, sv7206 v1.4, kernel 2.6.35.7-infotm
processor armv6 rev5,
hardware imapx200,
android 2.3.3,
brand infotmic,
display gri40,
release codename REL
bootloader unknown
I don't know if this is the right model IDea USA IUMID-0071 because the spec's are off. Http ://ideausa.us/produects.html but similar. I am looking for rom that is more update/modern. any potters?
Does anyone have the original rom for this or know how to make a backup this rom?
Well I am thinking that is might be this model but not to sure wm8650,SV7206 v1.4 or IDea USA IUMID-0071.
It's not flytouch
The screen is very slow on this model. Unless you use a pen then is works better.
Also hoping to be able to flash this to ics 4
Thanks
I just bought one, too. What a pos? it works but the screen is almost unusable, lots of mis-fires.
I did figure-out the real OEM web-page,
http://www.sinovideo.com.cn/Products/indexshow.asp?lang=EN&SortID=61&ID=85
This correctly identifies the installed 2.3 OS and reveals that it's some kind of 1 GHz processor. The real performance problem, however, is the 256 MB of memory, ouch!
I have not had any luck finding any updated ROMs. Actually, I suspect the installed ROM is tweaked to work around the defective screen (I think it's configured to ignore any 'touch' lasting less than 0.5 second?) so I'm not going to change it.
---------- Post added at 08:58 AM ---------- Previous post was at 08:49 AM ----------
FYI - I found another site that has lots of discussion about the "M7206" tablet
http://www.techknow.t0xic.nl/forum/index.php?board=51.0
Here's some more info. (Yes, I have continued to investigate even though I bad-mouthed it )
- This tablet is also sold as the "infotmic m7206"
- the screen works MUCH better if you use a stylus
Currently, my tablet seems to be getting about 24 hr standby battery-life, and the battery-usage report says "Cell standby" is using 75%, even though there's no cell radio? Some of the discussion on the techknow forum seems to be about this same issue but all the solutions seem to involve rolling your own ROM, which I'm not prepared to do. For now I just plan on leaving the tablet plugged-in overnight.
Rooting Idea USA Tablet
Oh my, what a mess...
This post is in regards to the Idea USA Tablet (Unable to Root)
My specs:
- Idea USA Tablet (Made in China)
- Model Number: MID (Unknown)
- Android Version: 2.3
- Kernel Version: 2.6.35.7
- Build Number: MID-userdebug 2.3 GRH55 (ENG)
Issues:
Whelp, I have tried the basics and I can't get this thing to root for anything. I was able to get it to hook into the PC through USB. There are 2 usb slots on the side of the tablet. I believe one is for HOST and the other usb is for OTG (Charging). Once I figured out the host port, then I had to download the drivers for this poorly made tablet...But, what drivers? You go to the Idea US website and you get no helpful information. So, there are no drivers made specifically for this $100 dollar generic tablet from FRY's. Ok... No big deal... So, I download the default "Android USB Drivers".
Peachy, it worked! Now, I can transfer files back and forth between the card(s). Wonderful, first step down, next step was to root. So, I read up on how to root with Super One Click.
Ok, so now, I set the tablet to "USB Storage" and "Host"...Then I download and run Super One Click.
Ok, I run the "Super One Click v.2.3.3"; by clicking the root button and then all I get is a frozen screen that reads:
Code:
Killing ADB Server.... Kill Server 0.11s
Starting ADB Server.... StartServer 4.09s * daemon not running. starting it now on port 5037* *daemon started successfully*
And then it just freezes the program. So, now I'm completely stuck. I mean I learned a great deal, that I can hook up a keyboard, mouse, etc to this thing, but, obviously Super One Click was not designed for these generic tablets. I have read other articles which have suggested that the .inf driver for the default "Android USB Drivers" needs to be edited for your specific tablet model and you must enter the specific CODE# for it to recognize for rooting with Super One Click... But, god forbid, I haven't found any useful information on where that might be. Also, someone suggested to install the Android SDK and edit those files along with the .inf files to make this work. But, that didn't work either. I did everything right. I turned off USB debugging and then I would wait for super one click to come up with waiting for device...but that never happened. I even tried it with USB debugging on... still nothing.
Has anyone created a generic batch program to root these types of devices? What am I doing wrong here?
Rooting Idea USA Tablet
Well, this took me all night to read and learn about how to root this basic tablet from Fry's.
First off, I tried many different things and it just didn't work. Using super one click is definitely out of the question for this particular tablet.
I read all night and thankfully found the forum article on how to solve this issue on xdadevelopers own forum.
As per quoted quotes below:
.....You can use gingerbreak to root this. Run it once and let it reboot, then use supermanager free from market to rename the su symlink from /bin/ to "old" or something, and reboot again.
You should now have root ........ It might take a couple of trys but it works.
You need to download supermanager from the market. Enable root in supermanager settings and click yes when superuser pops up.
Then use the file explorer within supermanager to navigate to the /bin/ directory and you will find a sysmlink called su
You need to rename this su symlink to old - completely take out the name su.
Just to be safe run gingerbreak again and then you can install busybox from market.
pablo11
Click to expand...
Click to collapse
Thank you so much Pablo11. The idea is to download the APK for GingerBreak from online onto your IDEA USA tablet directly. The trick here is that the brand name is IDEA "USA", but the real workings behind the "MID" is "ViMicro". You will notice that displayed as you turn on your tablet. So, in order to find real information about your MID device, you have to search articles for vimicro.
Once you run gingerbreak, your tablet will go completely nuts. Nothing will run right. Things will break and it will be a complete mess. It will however, install superuser apk. However, it will not work. You can download the Root Checker from the market and you will notice it is NOT rooted. So...thanks to pablo11, you will want to download supermanager from the google play market. Install it.
Next go into the supermanager settings and click on ROOT. Make sure root is enabled and checked marked in the settings. When you enable root in the settings, it will prompt you with "allow root?" Click on Yes. This will give you the access you need.
But, your not done, once again as per Pablo11, go to the super managers file manager section. Get to the root directory by clicking up, and then find the folder "bin". Look for the file "SU" and rename this to "old".
Now, you will be able install busybox and any thing else thats root.
By the way, restart your tablet again, and I "personally" recommend that you go into your settings> Privacy> Check mark both (Backup my data and Automatic Restore) and then click on Factory data reset. Start the tablet from like it was brand new. Don't worry it will keep the root that you did intact. You will just have to re-register the tablet with your existing gmail that you originally used with that tablet.
Lastly, use the root checker from the market and you will see that it is successfully rooted.
Okay... Now, my next step. To crack open this tablet and put in a bigger SD Card as the 2G SDCARD is way too small, especially if you want to use new roms and install a linux operating system onto it....
:fingers-crossed: ok so I've FINALLY been able to root my net10 zte merit z990g using a simple .zip install suggestr
d to me by a friend. (I know I took the easy way)
Since rooting it, I've went from the factory 2.3.5 stock and installed an ICS based verioson, which seems to be running great minor exception internet browser crashed & installation of opera web browser seemed to work smoothly on.
Since rooting it, I've bought another phone (Lg Optimus Dynamic) and activated it so that I may study the rooted device futher.
My questions are as follows:
1. Could someone possibly tell me the complete list of su commands are for my zte merit z990g and how to enter them? (Id like to use my su rights to explore the device componets, network (since its deactivated and has no working sim) and bootloader files/settings, etc for my own educational purposes to POSSIBLY futher my knowledge of the android based device. (quite new still yet to the whole technology mods, hacks & tricks) as well as explaining the whole shell thing?
2. Bootloader: how do I know if its unlocked, and if it isnt then what do I do to unlock it?
3. Is it possibe for one flash or install another custom rom or kernel to unlock a device? As stated I've went from gingerbread 2.3.5 to ICS . I first installed a .zip of TouchNav then a DexMeritRoot. zip, shortly after that I installed the ICS.zip. Though it seems to be stable, the battery drains extremly quick and there still is hardly any memory. Any ideas on a tweak setting to optimize
these issues?
4. Does anyone have another suggestion for a rom that I could try?
I ask advice as I know there are possibly other users out in the xda forum who are waaay more experienced with this device and could possibly share their wisdom with an inexperienced noob thats looking to expand her knowledge. So far, whats been done since the root, Ive enjoyed it (I use it to connect via wifi only to connect with friends and play online games when not tinkering with trying to enhance it to full potential) Ive just grown sightly accustomed to the udated zip of ICS and would like to try something new.
So, there it is guys, is there anyone who would like to offer their advice on the subjects? Id love to get some feedback.
Thanks in advance!!
ok, so I now know that I can install a .zip custom rom contaning no kernel since the merit is known to have issues rebooting and its linked to an "unstable kernel....but this confuses me. Doesnt the android based Zte Merit z990g have to have a kernel to function??
And I've come across the Stayboggy blue steel custom rom but Im apperhensive due to conflicting replies in the forum area I located it in. Dont get me wrong, he has some wonderful ROMS and software that Ive researched online. I just get a little nervous upon installing anything (Fear of drastic noob brick)
I've yet to find any real answers in my researches just yet, however I will continue to explore the device.
I guess upon reading Ive realized the bootloader thing has pretty much been addressed all on its own. Im guessing I wouldnt of been able to install the icecream Scamwhich custom rom, version of the ICS, would I??
Im still trying to find out the whole su commands, how to create shell etc so thats what Im tryin to grasp now.
Still would appreciate any opinions, and advice from others. on anything in the thread...
Okay so just to clear a few things up.
The bootloader for the merit is already unlocked due to Touch Nav being able to be flashed and replace the Stock Recovery with the update.zip. The bootloader would be the first menu that you "tampered" with in order to flash a permanent recovery that would allow you to use Touch Nav or ClockWorkMod recovery and then install ROMS. In my experience, I haven't ever come across a ROM being "pre-unlocked". This is because the way to unlock most phones is using the IMEI and being that is different in every phone it just can't be done until after the ROM is flashed. Some phones have apps for them like the Galaxy line and others are harder to unlock.
As far as running shell commands, you'll need to do that through ADB or a Terminal App. That's really the manual way of performing tasks on your device like pushing or pulling files with read/write privileges aka SuperUser. So it depends on what all is you want to try to learn to do manually. Like pulling system apps from your phone, replacing boot animations zip files, or what have you. In ADB, if your device is connected and have ADB debugging checked off you can try the command: "Adb devices". Minus the parentheses to check if can run other commands. "Adb help" will show you a quick command paragraph. You should still Google ADB commands or Android Terminal commands to explore further. Since your phone doesn't have a service, I recommend you trying a voip app to make calls through wifi just as neat thing to mess around with. Well that's just a bit of what I've gathered in my short time here in Xda Developers. If you like the challenge of research in the android/Linux world, this is really exciting way to start.
Oh and as far as the Ice scam Sandwich ROM, it is still Gingerbread. It's only themed system ui to look like ICS. There isn't an ICS based rom out for the ZTE Merit. Even SpeedFreak2.0 is Gingerbread. The low system storage issue was greatly addressed in SpeedFreak2.0 by creating an sd-ext3 partition on the micro sd. I had to create that in either TouchNav or ClockWorkMod and format. So backup all your data prior to doing this and installing the New Rom. I now have 4gb free of system storage and the Merit clocking at 864mhz. Pay close attention as I believe you install that ROM by restoring a backup file NOT flashing the. zip.
Now for the unstable kernel, I would recommend you download the 1.0 kernel I mentioned in another thread. The kernel comes in the ROM and it wouldn't run "without a kernel". Again, this would be after installing SpeedFreak2.0 by backup restore using ClockWorkMod that I believe is installed by flashing an update.zip that reboots TouchNav and let's you use a Temporary ClockWorkMod from which to backup(install) SpeedFreak2.0. You extract the SpeedFreak2.0. zip and get the backup file from there. I hope I made sense. I'm up late and I'll come back and check on you. Feel free to PM me if you find yourself lost.
Sent from my PantechP9090 using xda premium
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Nick Hill said:
Hi
I am new to hacking android. I have built linux distros in the past, and have worked with Linux for 15 years,
I have just rooted a ZTE V965. It doesn't come pre-installed with Play store, and has all sorts of ZTE-specific Chinese apps. It has a good baseband circuit, a good screen, reasonable camera and I think is a great value phone, apart from the awful UI.
It is an android phone, although heavily customised. It has an MTK6589 processor coupled with 4Gb ROM and 512Mb RAM.
I have other phones which operate a much more "Vanilla" android. For example, the Guophone 9105 which also uses an MTK6589. This has a troubling tendency to reboot every random interval. Approx 6 times a week.
I have had success in the past running Linux systems built for much earlier kernels on later kernels. This suggests the ABI (application binary interface) for the Linux kernel changes rather slowly.
I am wondering how well the userland apps are separated from the kernel and drivers on Android.
Specifically, is it feasible to dump all the UI stuff from one phone onto another then change the init to launch the other UI?
Would this risk bricking the phone, or would the shell commands and ADB infrastructure still likely operate?
I guess I should change the bootloader to one that supports fastboot first, right? Is ther a how-to on achieveing this from the root shell?
Thanks for any thoughts
Nick.
Click to expand...
Click to collapse
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
I really need to get google play working in this phone, read a lot of stuff, tried many things, but I havent succeeded yet. Please let me know if you make any progress.
In China they are flashing this phone, found some ROMs even, but I am not sure how they manage and google translate isn't much help there.
http://www.romjd.com/Device/zte-v965/hot/all/1
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Byte_Me said:
Hmmm my V965 is having some issues now
After a factory reset, the setup wizard keeps crashing. Even after another resest. So I can't get in the phone anymore.
Any chance you can send me the USB drivers that are on the phone? My phone isnt deteceted anymore, so I can't access the drivers, which I want to reinstall. And of course they are not on the ZTE website.
Click to expand...
Click to collapse
Hi
You can temporarily download the ZTE v965 USB drivers from
www dot nickhill dot co dot uk forward slash ztev965usb dot zip
Byte_Me said:
Hi Nick, I have the same phone. I'm also very new to android, last phone was iOS and before that windows. I managed to root the V965 using Vroot. I also managed to install SuperSU and CWM. However, the CWM is not fully functional, I can only do a factory reset, not install any packages or roms. Probably the phone has a locked bootloader. I can't check, because the USB driver with the phone doesnt support fastboot.
Click to expand...
Click to collapse
Fastboot and ADB appear to be standard protocols, at least on my Ubuntu, which don't need special drivers. However, it does appear that the stock boot loaader on the v965 does fail to incorporate the fastboot option.
If you remove the battery, replace it then turn on holding the volume down, you will get a menu, but fastboot is not there.
I don't know for a fact, but I do suspect that if you have access to the running android system as root, then you could in principle change any of the internal flash data. Therefore, in principle, I guess you could replace the boot loader or anything else in the running android system. Anyone please correct me if I am wrong, or confirm if I am right.
The feature set of this phone seems to be the same as the feature set of my Guophone. MTK6589, dual SIM, etc. So this image may be a good place to start if considering a transplant.
If you have ROMs, then perhaps it is possible to flash the ROM from a root terminal. I'm thinking add the uncompressed ROM to the Micro SD card, then using the dd command, block copy it to the appropriate image area on the internal ROM, reboot, reset to factory defaults.
If anyone more experienced than me with the nuts and bolts of Android can confirm or deny this will work, or where it should be put, please let me know.
An important factor is that the NAND is not locked on the ZTE V965. So if you have a root shell on the phone, you can issue the following command:
mount -o remount,rw /[email protected] /system/
Once you have done this, you will have read/write access to the system partition.
The only thing I then need to know is what should I avoid changing that may break the ADB bridge/root console?
And is all the UI stuff kept together, if so, where?
Shuffle it around a bit, make a new ROM
Thanks for the driver!
Unfortuntely it doesn't help
I found out the culprit, I tried to install gapps (google apps package) to the system app folder. I thought these changes would be reversed with a factory reset, but they are not. Setupwizard.apk keeps crashing and is preventing me from accessing my phone, so I must find a way to remove it from the system app folder. However, since this error occurred, I am not able to contact the phone in any way from the PC. Adb toolkit does not detect it, even when I reinstalled your driver. It's quite puzzling, I dont understand why in recovery mode I cannot connect adb-toolkit anymore.
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
I'm convinced it's possible to flash the phone, it seems they do it a lot in China.
I found a website with a couple of custom ROMs specific for the V965:
http://www.romjd.com/Rom/Detail/17086
And what I suspect is a rooting & flashing tool. Rooting works, I haven't figured out flashing yet.
http://dl.vmall.com/c0xa12brvo
I've also tried flashing from the settings - update menu in the phone, but it never finds the ROM (update.zip)
I did find another problem, I can't be reached on my phone, it always goes to voicemail. Same SIM in another phone works fine. No idea what's causing this.
Byte_Me said:
Got my V965 working again, but it was a lot of hassle with shell access. Still not fully functional, no drives detected when i connect to USB, which is quite annoying, but not more than that. If you ever make any progress with google apps or flashing, please keep me informed, that would make this phone much more useable. I'll also keep hacking away at it, but without a bootloader unlock (I still think this is the problem), I don't think it will be possible.
Click to expand...
Click to collapse
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
You should be able to write this back to your phone using flashtool.exe.
I don't know for sure if this will work, so entirely at your own risk! Just trying to help. If unsure, ask around.
I am new to this forum, so please remember to click the thanks button if you find anything I have done helpful!
Meanwhile, the MTK droid root and tools has a function to remove much of the chinese stuff (once the system has been installed) and there is always the cyanogenmod gapps package. This may be worth investigating.
Nick Hill said:
Hi
I might be able to help you with the problem.
I have a mint, unused ZTE v965. I have used MTK Droid root and tools to extract a backup of the entire new phone. It is currently uploading to www dot nickhill dot co dot uk forward slash ZTE-V965_new_backup.zip
Click to expand...
Click to collapse
The file size should be 635,972,093 bytes and should finish uploading at 04:00 GMT
md5sum 17ecfdd1040d5dbfab70a3adbc24e07a
Thanks for the ROM, i'll give it a go. I will try to install it using the update option in the settings, that seems the safest.
Be careful with gapps. setupwizard.apk + factory reset = a lot of problems (if you install in system app folder)
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Byte_Me said:
OMG that tool is awesome. created CWM boot, installed your ROM, then installed a clean ROM, then installed gapps, all working!!!
Click to expand...
Click to collapse
Firstly, I'm glad it's working for you.
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Which clean ROM did you then install, and how did you install it?
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it.
I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
Thanks, me too
Secondly, which tools did you use? Did you unpack the zip, open flashtools, select the scatter file then program the phone, or did you use some other method?
Click to expand...
Click to collapse
I used MTK tools as described in that topic, rooted, made backup, installed CWM
Which clean ROM did you then install, and how did you install it?
Click to expand...
Click to collapse
I used the update tool from CWM to flash this ROM:
http://www.romjd.com/Rom/Detail/17086
That ROM is not very clean though, You might as well clean your own ROM
Did you then use MobileUncle to install CWM then use the cyanogenmod 10.1 gapps, or did you do something different?
Click to expand...
Click to collapse
CWM is installed using MTK Droid Root and Tools:
http://forum.xda-developers.com/showpost.php?p=44660171&postcount=417
This gapps version I installed: gapps-jb-20121011-signed
It's installed using CWM bootloader: install .zip package
It is useful to remember that MTKdroidtools has a useful function to remove chinese stuff. I think if more people contributed to the list of Chinese files that are safe to remove, that would be blade.
Click to expand...
Click to collapse
I used the delete China function, but it didnt catch very much. But with all the functions available now, it's quite easy to clean manually.
A detailed step-by-step guide might be helpful for anyone else with the same problem. One of the general problems I find is that there are plenty of guides around referring to this program, or that program, but few are detailed enough for someone who doesn't already know about those programs to use.
Click to expand...
Click to collapse
Yes, I plan to make a topic for this phone, but at the moment I am still testing many things.
I pretty much bricked a Lenovo A766 yesterday, and it took several hours to learn about the tools to eventually unbrick it. I would have rather spent my time understanding what is really going on, rather than spending my time learning vaguely what tool achieves what end result. If I understood more about the Android system, and built that knowledge on my understanding of Linux, I reckon I could achieve much more.
Click to expand...
Click to collapse
I know how you feel, I was ready to toss this phone in the trash
One thing I notice is that tablets and smartphones are actually replacing desktops and laptops. February this year, windows machines were down 7% YOY. I use Ubuntu for my main computer. Using these tools on Windows led me to significant frustration! This has led me to understand why there is a move. Maybe the tools provided for windows need to eventually move to android. We could then potentially use USB OTG to service other android devices. MTKdroidtools and flashtools runnng as a host on a separate Android system would be cool.
Click to expand...
Click to collapse
I have no idea about the possibilities there. I'm not a programmer, just someone who is good with computers and knows a little bit of everything.
PS. I could also use some thanks as well, maybe get some respect around here
Nick Hill said:
...
Click to expand...
Click to collapse
Did you give it a try yet? Another user did and google apps are working for him, so thats 2 for 2.
Are you still on your original ROM? If so, I have a question for you. Do you get notification badges on your icons, for instance, when you have a missed call, is there a red box with a 1 on the phone icon? Also, do your contacts get ID-ed when they call you? I have some problems with that, caused by the country code prefix. I am still running that ROM I downlaoded from the Chinese forum, but if your ROM doent have these issues, I will switch back ASAP.
Nick Hill said:
Firstly, I'm glad it's working for you.
Click to expand...
Click to collapse
as you are a Lenovo a766 owner, may you help me with this?
http://forum.xda-developers.com/showthread.php?p=49076877#post49076877
Where are configuration settings stored accross factory resets?
I have come to the (perhaps erroneous) conclusion that the user interface and what the user will experience is governed primarily from:
the APKs in
/system/app/
/system/vendor/operator/app/
and the configuration files pertaining to the installed apps, which is located at:
/data/user/0/
I guess that when the android device is factory reset, the /data partition is completely cleared, right?
Is there a set of standard configurations which are unpacked from somewhere into /data/user/0/ after a factory reset, or is it normal for all configurations to be stored in their respective APKs?