Downloaded Rom from cm7 and at load screen it just keeps replaying over and over again. Tried to download Cm7 zip file on my sd card and when I put it back into my phone it didn't do anything. Any suggestions from you brains of xda?
Did you follow the instructions when flashing the rom such as wiping dalvic cache and data prior to flashing the rom.
Sent from my DROID X2 using Tapatalk
frost0180 said:
Downloaded Rom from cm7 and at load screen it just keeps replaying over and over again. Tried to download Cm7 zip file on my sd card and when I put it back into my phone it didn't do anything. Any suggestions from you brains of xda?
Click to expand...
Click to collapse
You need to download google apps as well my phone did this when trying to flash. Download gapps (located on this thread) and put that on your sd. Reboot into recovery and do wipe of cache and data before installing gapps first and cm7 again. This happened to me as well and as soon as gapps was on there everything worked fine. Good luck!
Related
You can get it here:
http://download.cyanogenmod.com/?device=p999
Also, mirrored here:
http://www.multiupload.com/GPC6UIWZWT
Thanks CyanogenMod team!!!!
Do I install it with ROM Manager?
Thanks Cyanogen ModTeam
i haven't used a custom rom hehe i hope it fix some bugs like wifi etc
Well, hows it workin for everybody?
rroyter said:
Do I install it with ROM Manager?
Click to expand...
Click to collapse
Yup! It's flashable with ClockworkMod Recovery...just flash it like any other flashable ZIP.
Okay so I backed up the stock ROM, installed ROM from SD and said Wipe Data and Cache. It rebooted, I had to setup the google account again, but in the settings it still shows version 2.2.2. Maybe I should do a manual wipe?
rroyter said:
Okay so I backed up the stock ROM, installed ROM from SD and said Wipe Data and Cache. It rebooted, I had to setup the google account again, but in the settings it still shows version 2.2.2. Maybe I should do a manual wipe?
Click to expand...
Click to collapse
That auto wipe that pops up has never worked right for some reason. Do it manually when youre in recovery- wipe data, wipe cache, wipe dalvik cache.
also do the update through recovery manually.
I've only flashed roms after downloading them through Rom manager, never had to boot into recovery. Is there a good video anyone can recommend on how to do this?
Here's a link to the wiki to assist with installing.
HTH
Ok so I wiped it manually and installed the rom. Make sure you put the rom onto external SD partition because in recovery mode you wont be able to access the internal SD.
So far looks like the basic functionality is working. I had a lot of force closes and the reported battery voltage is wrong, shows 3mV instead of 3000. As for battery life I'll report back tomorrow.
Sent from my LG-P999 using XDA Premium App
I was flashing CM 7 nightly 49 and now my phone is stuck on the LG logo, how do I fix?
After reading all the steps req'd to "Flash a Rom" and "recovery" process, what part isn't working?
N1user said:
After reading all the steps req'd to "Flash a Rom" and "recovery" process, what part isn't working?
Click to expand...
Click to collapse
After going through the NV flash process and getting to the last step that says
Keep holding them, as soon as you see "ANDROID" in Green with the new boot logo let go of the buttons.
From there it goes into boot recovery. I then choose from one of the roms I have on my SD card, it loads okay but then when I try to reboot it hangs up on the LG logo again
What am I doing wrong
we def need more info then that like what recovery how did u install the rom did u wipe data then cache then dalvik? then install rom and gapps? did u install any kernels previously? and this is probably going to get moved it should be in general
ok when u go into recovery do u wipe data factory reset, then cache, then go to advanced and wipe dalvik then install rom and gapps and it should boot up fine, did u make a backup of ur stock rom first?
sarni84 said:
ok when u go into recovery do u wipe data factory reset, then cache, then go to advanced and wipe dalvik then install rom and gapps and it should boot up fine, did u make a backup of ur stock rom first?
Click to expand...
Click to collapse
Damn. for one month on XDA you sure do have a lot of posts
On topic: I'm assuming you forgot to fully wipe before flashing the new rom.
If you can get into recovery, it's not bricked.
Read the install directions, you missed a step or got a bad download.. Or a bad build, as they are nightlys...
In recovery, do factory reset, then mounts and storage, select format system. Then install the rom.
Also, get the stock nandroid and put it on your card so you can drop to a known good setup.
I had back it up using rom manager but its on another computer. I took had gotten a SD card with more storage and never transferred it.
omarsalmin said:
Damn. for one month on XDA you sure do have a lot of posts
On topic: I'm assuming you forgot to fully wipe before flashing the new rom.
Click to expand...
Click to collapse
wow i do huh i cant stay away
Goldbatt said:
I had back it up using rom manager but its on another computer. I took had gotten a SD card with more storage and never transferred it.
Click to expand...
Click to collapse
You could copy the backup from your computer and make a folder called clockworkmod/backup/ on your new SD and put the backup file in that folder. When you go into recovery, backup and restore. restore - it should be visible. Select it and you should be OK - IF your backup is good.
If not, download a ROM and Gapps with your computer and put them in the root of your SD. Then after a full wipe, flash them.
If you have the latest Recovery, you can mount storage and then cut and past to your device while connected. If not, or if you have any problems moving them, just take it out and do it while it is plugged in your computer.
You have several options - so one of them will work.
Want to thank all you guys. I got it working again.
Sent from my LG-P999 using XDA App
Moved to proper forum.
Hey!
First let me say that I know all about flashing SGS and SGS2. Im a proud owner of SGS1 from day 1.
Last week I decided to finally flash my brothers i9023 so I flashed stock 4.0.3 with stock recovery. Then we wanted to flash some XDA stuff and I don't understand these guides...
I found one guide where you get superuser access with one click and usb cable, I did that, then I flashed CWM through Rom manager and flashed 4.0.4 from evilisto (v1.1) and it worked. Now I'm trying to flash some others, like nuhetri reloaded or pixel rom and I'm always getting stuck at boot animation. It just keeps "working" and nothing happens for 5+ minutes.
What am I doing wrong? Please help!
Best Regards
Luka
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
sean1984 said:
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
Click to expand...
Click to collapse
Hey and thanks for such quick reply!
I did all these now, rebooted to recovery (from CWM) and flashed this Fully Touched:
http://forum.xda-developers.com/showthread.php?t=1411734
Its stuck at boot image for 5 minutes now.
What now?
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
sean1984 said:
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
Click to expand...
Click to collapse
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
devianceluka said:
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
Click to expand...
Click to collapse
do yourself a favor, do it the right way the first time and save yourself headaches in the future. its not hard. fastboot oem unlock(bootloader), flash a custom recovery, flash a custom rom(and gapps) via the recovery, then boot up. thats it.
If you are more of a visual type of guy I suggest going on YouTube and search "zedomax". He has some really simple videos on how to root your nexus s, he has a couple videos on how to root but make sure its for a GSM nexus.
Simms got all in a simply way.
Unlock boot loader
Install or flash cwm
install the new stuff from SD card
reboot
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Excuse my ignorance, I'm pretty new to this and I might not be of any help at all... but is it even possible to flash a custom recovery without unlocking the bootloader on the Nexus S?
I followed the instructions found on the NexusShacks.com website (How to root Nexus S or Nexus S 4G on ICS or Gingerbread) without any issues at all (sorry, can't post links due to low postcount :/)
No problems for me, I had zero experience with this sort of stuff but I have flashed a new ROM a every few days now without any issues whatsoever.
devianceluka said:
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Click to expand...
Click to collapse
use this link: http://nexusshacks.com/
its complete with the files, pictures, video and some ics roms that you can try. let me know if you have any other question
I recently rooted my T-Mobile G2x and was wondering how to flash a Rom without the use of my computer unless 100% necessary, i have titanium backup and Rom manager, i tried flashing one directly from there but it got stuck in recovery. I took out the battery and everything is normal, what i think the problem is, is my SD card its a 4GB but it only has about 300MD left. Can anyone help?
-Thanks so much
MyNameMikee said:
I recently rooted my T-Mobile G2x and was wondering how to flash a Rom without the use of my computer unless 100% necessary, i have titanium backup and Rom manager, i tried flashing one directly from there but it got stuck in recovery. I took out the battery and everything is normal, what i think the problem is, is my SD card its a 4GB but it only has about 300MD left. Can anyone help?
-Thanks so much
Click to expand...
Click to collapse
You need to Nvflash ClockworldMod recovery on your phone. Then when you have it. You put a ROM which you want to try on your SD card or internal memory as you don't have much space in your SD card.
Clear Factory/Data
Cache
DAlvik Cache
format system
Flash your new Rom
Flash Gapps (google apps)
Enjoy.
does anyone have the link for the gapps? i go to http://goo.im/gapps/ but i cant download then for some reason
Could search Google, can't really give you a link without knowing what version of android you're flashing
Sent from my LG-P999
MyNameMikee said:
does anyone have the link for the gapps? i go to http://goo.im/gapps/ but i cant download then for some reason
Click to expand...
Click to collapse
Search Google for 290412 dated apps for ics and something0811 for GB.
Sent from my LG-P999
Hi everyone, Im relatively new to the whole flashing and custom rom scene. I rooted my wind mobile (Canadian carrier) LG-P999 and ran CMR before trying to flash EGB. I used the instructions on the forum post to install EGB. In the installation process however, It looked like Gapps were already installed, I installed the Gapps I was told to download here http://forum.xda-developers.com/showthread.php?t=1575199 again anyways. My phone will now not start, all that happens when I press the power button is the LG logo flashes, and then the Eaglesblood logo flashes then the phone shuts down. I have the CWM recovery file saved on my computer. Can someone help me unbrick my phone? thanks in advance, and please excuse my horrible grammar, I'm quite terrified right now.
EDIT: I messed around with my phone, and I am able to get into the Android System Recovery. Should I wipe data/factory reset? Will that solve my issues?
First get the rom you want to install on a sd card boot into recovery and wipe and install. If you factory reset it still will try and load eaglesblood. If using a cm 7 rom like eb or hellfire flash gapps right after the rom. Hope this helps
Sent from my LG-P999 using xda premium
How I do it with no problems
monte666 said:
First get the rom you want to install on a sd card boot into recovery and wipe and install. If you factory reset it still will try and load eaglesblood. If using a cm 7 rom like eb or hellfire flash gapps right after the rom. Hope this helps
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Anytime you flash rom, I recommend these steps. (Some may argue that it's over kill)
Get a Copy of Titanium Backup Pro.apk
Batch back-up all your user apps if you so wish. (These first two are optional, but I highly recommend)
Copy ROM, Kernel, and Gapps to MicroSD card. (EXTERNAL)
Boot into CWM.
Do a Wipe data/factory reset
Wipe cache partition
select advanced-->wipe dalvik cache
mounts and storage-->format /system
Install zip from sdcard (not the apply update option!)
select your ROM, flash
select you kernel, flash,
<optional, if your on March BB and depending on ROM, you may need to flash new baseband.zip, forum search for it)
select gapps, flash
Reboot!
Sometimes upon booting you made need to wait 5-10min for phone to come up and be speedy. Be patient.
Hope some of this helps since your able to boot into CWM, which means your not bricked, yet. I;ve been there in a loop, called it soft bricked. Performed all of the above steps, never had the problem occur since. I jump between two GB 2.3.7 ROMS and two ICS ROMs with ease.