SKernel - Power and Performance
SKernelv0.3 - http://www.mediafire.com/?19n6k3kee0k1kpk
Based 0n 2.6.35
OC 1.5ghz -
minimum [email protected]
maximum [email protected]
VR I/O scheduler as default
SmartAss set as Default
Know Bugs - Wifi Stops Working - should be sorted by tonight
http://forum.xda-developers.com/attachment.php?attachmentid=606109&d=1306261299 - link to og kernel thx to marylandcookie
Rom Compatibility
Should work on latest gb builds of loveboatcaptains and marylandcookies rom
For the Wifi Problem here is the driver - http://www.mediafire.com/?mewvu7ifxya8zx3
Not fixed the problem yet. but if anyone wants to try themselves they can or suggest a solution as usual methods not working.
For those that need wifi marylandcookie has given me permission to upload coredroid 6.6 with my kernel where wifi is working
coredroid 6.6 with this kernel if flashable zip leavin u with wifi off
http://www.mediafire.com/?dd3zzpa0c3902n4 - Part 1
http://www.mediafire.com/?1yu6a29a25l0a2g - Part 2
http://www.mediafire.com/?c5g9r5tlgw462rc - Part 3
http://www.mediafire.com/?77eleb6jed1fex5 - Part 4
Thanks
MaryLandCookie
LoveBoatCaptain
l0st.prophet
and everyone else who helped
Please let me know anymore bugs and suggestions are welcome too
PS speeeds above 1.5 can fry ur cpu or make phone unstable
git://github.com/chwads2k8/SKernel.git - source files
Hi! Great! I hope the wifi gets fixed soon
Good stuff @chwads2k8
I hope so about wifi
Anyone tried benchmarking ?
Quadrant 1892pts @ 1.5GHz vs. 1708pts @ 1.0 GHz...
great kernel. running very fast. i get linpack over 55 and
tap benchmark for s: 9375
desire hd: 2726
desire: 1152
not just benchmark, everything running faster thanks man!
kernel updated first post
can confirm that your flashable zip works out of the box with my latest version of my rom.
thank you very much for that. i will made some tests tomorrow with wifi, gps and bluetooth. but looks very good at first view
linpack: 58 MFlops
quadrant: 2450
regards
loveboatcaptain said:
can confirm that your flashable zip works out of the box with my latest version of my rom.
thank you very much for that. i will made some tests tomorrow with wifi, gps and bluetooth. but looks very good at first view
linpack: 58 MFlops
quadrant: 2450
regards
Click to expand...
Click to collapse
yh it does ur latest build is 0.4.2 and trested it on their so should work only the wifi problem. i havnt made a boot.img its the zimage so if u want u can that in ur build to get wifi working or ill do it tmoz if u want as many of ur faithfuls need wifi to work and until now all attempts have been futile but hope still remains
chwads2k8 said:
yh it does ur latest build is 0.4.2 and trested it on their so should work only the wifi problem. i havnt made a boot.img its the zimage so if u want u can that in ur build to get wifi working or ill do it tmoz if u want as many of ur faithfuls need wifi to work and until now all attempts have been futile but hope still remains
Click to expand...
Click to collapse
wifi is working... very well
even with my unreleased saga lbc mod v0.4.3
good job... whatever you´ve done
regards
By the way which wifi module have you used and which kernel?
Did you start with a pair?
P.S
In order to create a flashable kernel, create a boot.img.
If you answer the above i'll see what i can do.
only thing i found is that the performance is decreasing with clocks over 1,5GHz.
i wouldn´t recommands setting over 1,5GHz.
performance seems to be best with 1497 MHz / 245 MHz and interactive gouvener.
perhaps you can add this info to your first post, before someone grills his CPU
regards
can anyone else confirm wifi is working with flashable zip
chwads2k8 said:
can anyone else confirm wifi is working with flashable zip
Click to expand...
Click to collapse
I'll do a nandroid flash it and report back.
Edit: Doesn't work for me
Sent from my HTC Desire S using XDA Premium App
will this ruined the battery life? since it's overclocking the CPU which requires more power?
nodeffect said:
will this ruined the battery life? since it's overclocking the CPU which requires more power?
Click to expand...
Click to collapse
I've never overclocked before and am on my first android device so I too am concerned that this will cause battery life problems, I think that the phone performs well enough for my needs.
Sent from my HTC Desire S using XDA App
chwads2k8 said:
can anyone else confirm wifi is working with flashable zip
Click to expand...
Click to collapse
You need to create a boot.img with your kernel and ramdisk to be able to flash it in a zip. Use the kitchen to unpack/pack your boot.img and try that
thing is iv got Image in zip so all can use. if i mke with voot image same prob with wifi
which is wierd gna try n sft it today
Sent from my HTC Desire S using XDA Premium App
No no...
1. Unpack stock boot.img (or whichever boot.img you want to use) using kitchen to get "zimage" and ramdisk folder with init files
2. Replace above zimage with your zimage
3. Unpack your ramdisk and replace above files with yours.
4. Re-Pack boot.img using the kitchen again.
5. Create flashable zip with boot.img (your ramdisk + kernel) in root of zip and wifi module in system/etc/module and flash to phone in recovery.
You can find the stock kernels to replace if everything goes "pete tong" using recovery here:
http://forum.xda-developers.com/showpost.php?p=14103229&postcount=21
Is it possible to patch the kernel to a newer version ?
Related
AnyKernel zips will only replace the kernel in your boot.img.
To define a boot.img:
Kernel(zImage) + ramdisk(root file system + init scripts) = boot.img
Where AnyKernel came from:
While searching for different kernels for my Motorola Droid I stumbled on a great idea implemented by Koush. Basically it will split the boot.img from recovery while your phone is running then replace the kernel and make a new boot.img and flash it along with the correct modules for the kernel.
I figured I would implement it on the CDMA Hero and it worked out.
This will work on any rooted rom with a custom recovery running Sense UI including the stock rom.
------------------------------------------------------------------------------------------------------------------------------------------------------------
Here are the undervolted and overclocked kernels for Sense ROMS
These kernels are built from the HTC heroc-2.6.29-bc0d2ccf source with toasts overclock patch modified by darchstar/Decad3nce to include undervolt.
The git repo for this is @ http://github.com/zenulator/htc-heroc-2.6.29-bc0d2cff
The GPL license can be read @ http://www.gnu.org/licenses/gpl.html
ZenKernel-HTC-08122010 no perf lock
It has perf lock disabled to allow full overclocking with out the need use setcpu to disable perf lock. The clock speeds will stay at what ever the target rom uses unless you running a rom with no overclock built in. If so it will scale from 19mhz to 768mhz.
Download
ZenKernel-HTC-08122010 perf lock
Same as above but with perf lock enabled. It will run at stock values on any sense Rom until you use setcpu. To overclock it you will need to set setcpu to autodetect and then disable perf lock inside setcpu.
Download
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
StockVoltage Overclocked Kernel:
This kernel is built from the same source as the rest except the voltages were changed to stock values. It will max out at 691 and the governor is set to performance.
Download
Setcpu is free for xda memebers and can be found here:
http://forum.xda-developers.com/showpost.php?p=3638937&postcount=1
Instructions:
Download the update and copy it to the root of your sdcard.
Reboot into recovery.
Nandroid (just in case you want to go back)
Flash the update
Reboot
Check Settings > About phone > Software information > Kernel version
_____________________________________________________________________________
If you wish to modify this with another kernel just extract the update and replace the zImage in the kernel directory with the one you want and replace the corresponding modules. Then rezip and resign and flash. It will work on any 2.1 sense rom regardless of boot.img.
Damn good work zenulator I am downloading it now and will test thoroughly tomorrow and see how it go's.
Thanks for the hard work.
Works great, using it with your beta ROM. Lock screen lag is gone
I got used to it so I barely noticed it... but now it seems a lot faster
I know you just started this and it says for sense. But I gotta ask is there anyway that this will work with froyo? I'm not a fan of overclock roms because of the lag when you push the menu key till when you screen is actually ready to go. And this gives me hope
of having a kernel that doesn't do that
thatguythatdid said:
I know you just started this and it says for sense. But I gotta ask is there anyway that this will work with froyo? I'm not a fan of overclock roms because of the lag when you push the menu key till when you screen is actually ready to go. And this gives me hope
of having a kernel that doesn't do that
Click to expand...
Click to collapse
Yes it will work for froyo if you modify it and put in the correct zImage (kernel). It won't work with the update I posted since it's made for Sense roms and uses HTC's Synaptics driver which isn't compatible with AOSP 2.2 Froyo/Cyanogenmod.
If you want a AOSP kernel with no overclock and no ability to overclock at all then I can do that but not for a couple days. If you ask darch he might be able to do it quicker since he already has everything set up and most likely only two files will need to be changed before a compile.
zenulator said:
Yes it will work for froyo if you modify it and put in the correct zImage (kernel). It won't work with the update I posted since it's made for Sense roms and uses HTC's Synaptics driver which isn't compatible with AOSP 2.2 Froyo/Cyanogenmod.
If you want a AOSP kernel with no overclock and no ability to overclock at all then I can do that but not for a couple days. If you ask darch he might be able to do it quicker since he already has everything set up and most likely only two files will need to be changed before a compile.
Click to expand...
Click to collapse
Thanks for the reply I'm gonna give the new kernel a chance to see how it does
Excuse my ignorance but how is this different from Standard DarchKernel vUV2 691 MHz found here http://forum.xda-developers.com/showthread.php?t=705074 ?
That's what I'm using and it already says
Kernel version
2.6.29-cyanogenmod
[email protected] #6
Thanks for this zen works great
this is undervolted correct? does this really help the battery life?
c00ller said:
Excuse my ignorance but how is this different from Standard DarchKernel vUV2 691 MHz found here http://forum.xda-developers.com/showthread.php?t=705074 ?
That's what I'm using and it already says
Kernel version
2.6.29-cyanogenmod
[email protected] #6
Click to expand...
Click to collapse
Uhh. I'm going to give a brief explanation.
AnyKernel is a tool created by Koushik Dutta found here on github.
The beauty of it is that it can flash/add a kernel to any boot.img regardless of ramdisk. It literally does the unpacking of the boot.img, extracting of the ramdisk, deletion of the original kernel and repacking of the boot.img together with the kernel of your choice.
The difference with this is probably changes in base address/cmd line and possible how it's extracted(haven't looked at it). Very awesome tool nonetheless, and is a lot more efficient that going through the process of coupling the kernel with each specific ramdisk before releasing a boot.img.
That's how it's different from your quoted "kernel".
Decad3nce said:
Uhh. I'm going to give a brief explanation.
AnyKernel is a tool created by Koushik Dutta found here on github.
The beauty of it is that it can flash/add a kernel to any boot.img regardless of ramdisk. It literally does the unpacking of the boot.img, extracting of the ramdisk, deletion of the original kernel and repacking of the boot.img together with the kernel of your choice.
The difference with this is probably changes in base address/cmd line and possible how it's extracted(haven't looked at it). Very awesome tool nonetheless, and is a lot more efficient that going through the process of coupling the kernel with each specific ramdisk before releasing a boot.img.
That's how it's different from your quoted "kernel".
Click to expand...
Click to collapse
I understand the explanation but have to ask what rge different change. I know this will just change the kernal from the boot imiage which is great and it has the HTC synaptic drivers in the kernal but that kernal with the HTC drivers has already been implemented into the latest boot.imgs. its a cool concept and would make it easier to change just the kernal for a one shot stop when a newer kernal comes out but as of right now that's the same kernal most of the sense based roms have already implemented into them at this time. If im wrong I'm sorry.
Now with the HTC Synaptics driver included, the swipe action once the screen is on is no longer lagged. However, I notice that there is still lag from the time the power button is hit to the time the screen comes on as compared to stock where there is almost no lag. Is there some other driver or something that causes this?
Well just an update but it has been very smooth so far, 8 hours as still smooth . Great job. Screen rotation and scroll seem quicker also .
Sent from my HERO200 using XDA App
Papa Smurf151 said:
I understand the explanation but have to ask what rge different change. I know this will just change the kernal from the boot imiage which is great and it has the HTC synaptic drivers in the kernal but that kernal with the HTC drivers has already been implemented into the latest boot.imgs. its a cool concept and would make it easier to change just the kernal for a one shot stop when a newer kernal comes out but as of right now that's the same kernal most of the sense based roms have already implemented into them at this time. If im wrong I'm sorry.
Click to expand...
Click to collapse
This will just make it a lot easier instead of having multiple boot.img for different roms like in the other thread. Plus this will work on other roms not supported in the other thread. I know the kernel brings nothing new but for instance if someone wants to overclock my old ZenHero they can now do that. Or if someone just rooted their phone and installed RA or some other recovery this is all they need to over clock and still keep their stock system.
So when someone makes a new kernel they can use this and have it work on any Rom instead of just a specific Rom.
Sent from my HERO200 using XDA App
zer0vette said:
Now with the HTC Synaptics driver included, the swipe action once the screen is one is no longer lagged. However, I notice that there is still lag from the time the power button is hit to the time the screen comes on as compared to stock where there is almost no lag. Is there some other driver or something that causes this?
Click to expand...
Click to collapse
I've always wondered about this delay with the OC kernels as well.
Sent from my HERO200 using XDA App
zenulator said:
This will just make it a lot easier instead of having multiple boot.img for different roms like in the other thread. Plus this will work on other roms not supported in the other thread. I know the kernel brings nothing new but for instance if someone wants to overclock my old ZenHero they can now do that. Or if someone just rooted their phone and installed RA or some other recovery this is all they need to over clock and still keep their stock system.
So when someone makes a new kernel they can use this and have it work on any Rom instead of just a specific Rom.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Makes sense. I thought about it actually and it will make things easier. I used it earlier today on a boot.img I flashed first that had the ramdisk mod for battery tweak but I think was missing the HTC synaptic driver. Lag is all gone and it worked great.
Papa Smurf151 said:
Makes sense. I thought about it actually and it will make things easier. I used it earlier today on a boot.img I flashed first that had the ramdisk mod for battery tweak but I think was missing the HTC synaptic driver. Lag is all gone and it worked great.
Click to expand...
Click to collapse
It's definitely going to make it easier for me at least since I plan on doing a bunch of new kernels based on toasts and darchstars work. As well as the official HTC kernel with toasts overclock.
Sent from my HERO200 using XDA App
zenulator said:
It's definitely going to make it easier for me at least since I plan on doing a bunch of new kernels based on toasts and darchstars work. As well as the official HTC kernel with toasts overclock.
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Now this is what I'm talking about
I was looking for something like this. Darchstar is one helluva dev, but it seems like the only kernels in use these days are Toasts (base) then modded toast kerenels by Darchstar (which are great as well). But I'd like to see a couple of tweaks fixed in the most recent Kernel #6 such as the typo that Uroshiol mentioned that is located in the actual zImage in the DArchstar uv2 kernel 710 with freememkiller
Nice nice work ya'llz and great stuff Zen... makes the addition of new kernels a breeeeze
Wait...so there is an under volted, oc kernel available for nfinite's .6 stock rom that eliminates the menu button wake lag?? i dont like the lag but deal with it. although if there is a way to eliminate the lag, please share!!
Zen, you're definitely an unsung hero (no pun intended I swear) around these parts and I for one definitely appreciate your work. Cheers!
Found New Rom in htc spain
ROM 20B in stock .. zip roteada CWR
-Roteada, superuser -Boot at 1150 OC We thank Comrade estrajo BERIARU that the boot of the 20B and has served us to make the OC causes the kernel l
Installation -From the recovery .. do not forget WIPES This intestate. (Just me). If there is any bug report it, but should only appear who are on official
http://www.wuala.com/jechus/ROMS/
Say thx Tor acura and when like press THX button
trying now
cjx75 said:
trying now
Click to expand...
Click to collapse
Same here.
Is there any other boot versions? The samba beta v2 had many to choose from.
Nope. Only one. But I am able to use with Samba boot option. So far so good. never hanged or ghost call.
Just installed over samba rom without any wipe. Used original boot from samba, i never overclock my phone. Everything is smooth, some apps are missing (cell broadcast widget :-( , whatsapp...) and some are added, some NeverWillUse buddy apps etc. I will definetly stay on this rom for some time.
Sent from my LG-P920 using XDA App
very nice, stable and smooth rom. (installed on german p920 over v21 thiaiz clean v.0.2)
Jechus said on htcspain.com that this rom is almos the same as samba, and that the final samba will be out soon. I wish samba will have gpu oc @400 MHz..
IFLPI
I wish samba will have gpu oc @400 MHz.
+1
Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?
Ok found 1 flaw so far , the camera fc and the phone reboots when u open the camera app in landscape mode.
overall a smooth rom
douglam said:
Anyone know the difference between this and the AcuraTeam_20A_stock_SAMBA_.zip that is now showing in the download link?
Click to expand...
Click to collapse
One is four p920
Other p920h
kampfbestie said:
One is four p920
Other p920h
Click to expand...
Click to collapse
Thanks. I have the p920, but I have tried the samba beta before and it works well for me as well. So is there a real difference?
Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h
kampfbestie said:
Tested also both and didnt saw a difference
For dayly use im using rushdroid (modificated samba) also p920h
Click to expand...
Click to collapse
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.
douglam said:
I would like to try rushdroid, but unfortunately there is only one OC speed at 1.2ghz and my phone is not really stable at that high OC. 1.15ghz is the highest it will go.
Click to expand...
Click to collapse
Have at time only the 1188 killer kernel maybe at home more here the link
http://hotfile.com/dl/148223809/0d47003/Samba2020.1188-KIllers.zip.html
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Ok. Then I guess I should wait for the rushdroid to patch the ROM and release the different oc
boots before trying. 20B is good for me at the moment.
jechus said:
samba beta corruptus had two files, which are also present in rushdroid ...... "netcfg" and "run-as" in-Bin System should be replaced for proper functioning ... informing Rhus to the fix
...............................................................................................................................................................
Soon new boots with the new kernel to different roms OC.compatbles with both 20B and 20A
Click to expand...
Click to collapse
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.
The BEST Rom for me!
Thanks
IFLPI said:
Nice. Would it be possible to make OC and undervolting kernel that will run 1,3GHz cpu and 400MHz gpu on Gingerbread rom as it is on Maximum Velocity froyo rom? I would like to have it on ginger cause I dont want to downgrade and flash Froyo baseband. It would be nice in a final Samba rom.
Click to expand...
Click to collapse
The kernel released by LG, for Ginger 21A ... does not work, does not the network coverage, and they have not fixed or released other.
This kernel aims to improve performance, while still maximizing stability (and getting rid of reboots and SODs). It's working on all ROMs so far, so here it is for your approval. It can overclock to 1704Mhz, but doesn't override your user limit. I've added SIO and Init.d support and some various tweaks, and rebased to the newest source. Next is more cpu governors and general tweaks. Thanks to Roach for his commits from github, and guevor for new suspend code to imitate.
Some ROMs use a different build config, so Use The Right Version Below! Please Wipe Cache in CWM before flashing.
Update 4/11/12: Added test version of Veno, read about it at: http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf1.0 is up for All testers. Voodoo should be supported, please report. Wifi has been tested on Stock/ARHD/Revolver/Megatron/CNA/AOKP, but please test with other ROMs. I'm trying to compile one kernel for all ROMs, but EOS is still separate. Mega props to Guevor for the new suspend code. I'm trying to implement it without directly copying him though, so I need testers again. I will compile for other ROMs if necessary.
Update 4/7/12-2: 0.8 Added OC up to 1704mhz, Under/Overvolt support, made some changes to error handling for wifi stack, tweaked default voltages, and some stuff I can't remember right now. For testing, 0.8 downloads are in green. CIFS, TUN, and NTFS are cooked in, you should not need to load modules. There is a download link provided below for people who want the modules anyways.Personally tested on all ROMs listed, haven't had time to try Frozn.
Install with CWM or Rogue
Download 1.0(All ROMs, except EOS):http://db.tt/nNEbqufy
Download 1.0 With TCP_VENO(All ROMs, except EOS):http://db.tt/CqEqLMDQ
Download 1.0(EOS):http://db.tt/nnn4x9mN
Download 0.8(Stock/ARHD/Revolver/Megatron):http://db.tt/XyxW8WTK
Download 0.8(CNA/CM9Mar29/AOKP):http://db.tt/fiOXe16e
Download 0.8(EOS)http://db.tt/rcUAfPjz
Download 0.6 (Stock/ARHD/Revolver):http://db.tt/YDIInoKn
Download 0.6 (CNA, CM9, AOKP):http://db.tt/wdwPhWVt
Download 0.6 (EOS):http://db.tt/1yAOB7tq
Download 0.7 (Stock/ARHD/Revolver):http://db.tt/YsOdC3Tk
Download 0.7 (CNA, CM9, AOKP):http://db.tt/91iLDpKq
Download 0.7 (EOS):http://db.tt/HVY81MUQ
CIFS/NTFS Modules: http://dl.dropbox.com/u/21284412/modules.zip
You shouldn't need these, but I'll leave the link for old time's sake.
This is still beta. You must have balls to flash this(metaphorically speaking). Don't rip mine off if you have to reflash something else.
I had a couple requests for a donation link, so I'm posting one below. Feel free to buy me a beer if you want, but most of the work was done by the source code and people before me.
Click Here To Donate To My Delinquency
Github is at: https://github.com/msticninja/asus_kernel_tf101
Changelog:
Code:
1.0-Veno Add TCP_VENO as default ipv4 Congestion Control Method
1.0 Change suspend code to be closer to guevor's. Hopefully fix reboots again. Add post_boot exec for ARHD.
0.9 Change clk_disable_locked code to be closer to Nvidia source. Hopefully fix reboots.
0.8 Add BFQ, Over/Undervolt support, wifi patches, OC to 1704, etc.
0.7 Rebased off Asus March 29th Kernel Source. SIO/Init.d is now included in all kernels.
0.6 Fixed Wifi on CNA SIO Version(still getting the hang of using git branches, sorry)
0.5 Add Init.d support to ramdisk
0.4 Add SIO IO Scheduler
0.3 Add EOS Version
0.2 Add CNA/CM9/AOKP Version
0.1 Add OC and compile tweaks
Compatible with cyanogenmod?
psyk974 said:
Compatible with cyanogenmod?
Click to expand...
Click to collapse
Depends. Try it. The worst thing will be that the wifi doesn't work. I'm working on the bcmdhd version for people with AOSP roms, that may use the same driver.
Thx. I will try it !
Thank you , but can u chack if the dock 2xUSB (removable disk) is working?
Because on every OC ICS kernel that i tried so far on the tf101 , the dock USB stop working
psyk974 said:
Thx. I will try it !
Click to expand...
Click to collapse
Let me know what happens. If anything isn't right, give me as much detail as you can.
i9apps said:
Thank you , but can u chack if the dock 2xUSB (removable disk) is working?
Because on every OC ICS kernel that i tried so far on the tf101 , the dock USB stop working
Click to expand...
Click to collapse
Just checked with a couple of flash drives, works perfectly.
msticninja said:
Let me know what happens. If anything isn't right, give me as much detail as you can.
Click to expand...
Click to collapse
Okay ! I inform you
msticninja said:
I just compiled this from my github, which is forked from Roach's(He's working on EOS, so I'm filling in the void for now, with his permission). It's working beautifully for me on stock ROM and ARHD so far, so here it is for testing. It can overclock to 1600Mhz, but doesn't override your user limit. Blades' test kernel "meh" overrides the user limit once the screen is off, which makes my TF reboot constantly. That's really the only reason I compiled my own kernel, but I know other people have this issue, and Roach said he doesn't have time to compile and post it for us. Thanks to Roach of course, and Blades, because I used his "meh" updater-script (because I forgot which partition the kernel was supposed to be dd'ed to.)
Install with CWM, (or Rogue(untested though))
Download:http://db.tt/wKQ6ho2h
This is still beta. You must have balls to flash this(metaphorically speaking). Don't rip mine off if you have to reflash something else.
Going to bed now. Will respond to responding responders in morning. Seriously. Me So Tired.
P.S. @guevor Didn't mean to post this right after you merged Roach's fix, we must've been compiling at the same time, little did we know.
Click to expand...
Click to collapse
Dont forget the source or patches main rule !!!
Could you list the Core mV per frequency too please?
Jhinta said:
Dont forget the source or patches main rule !!!
Click to expand...
Click to collapse
Grrr...lack of sleep. I thought I did. Appended.
cspiby said:
Could you list the Core mV per frequency too please?
Click to expand...
Click to collapse
https://github.com/msticninja/asus_kernel_tf101/blob/d1da185880877e22c7881fe69d4cb650e7a84ba5/arch/arm/mach-tegra/tegra2_dvfs.c
Too sleepy to make a table out of it. I'll do it tomorrow if you can't figure it out from the source.
Just flashed the kernel , got a first reboot after 4 seconds
will try again now
i9apps said:
Just flashed the kernel , got a first reboot after 4 seconds
will try again now
Click to expand...
Click to collapse
Like I said, if you have issues, give as much info as possible. ROM, frequency settings, etc. I only have one TF to test on, so you'll have help me out.
initd support?
drakal said:
initd support?
Click to expand...
Click to collapse
Haven't had time yet, just made it for my own purposes originally. I'll put a new ramdisk together and repack tomorrow if someone else hasn't done it by then.
msticninja said:
Like I said, if you have issues, give as much info as possible. ROM, frequency settings, etc. I only have one TF to test on, so you'll have help me out.
Click to expand...
Click to collapse
I am running Revolver rom 1600 GHz and the kernel not working for me , the tf freeze or reboot, on the other kernels i manage to OC to 1.68Ghz stable
i9apps said:
I am running Revolver rom 1600 GHz and the kernel not working for me , the tf freeze or reboot, on the other kernels i manage to OC to 1.68Ghz stable
Click to expand...
Click to collapse
I haven't tested on Revolver. I didn't add init.d support yet, so it could be that. Can you run at lower frequencies without rebooting? Mine can't handle 1600 on any kernel, so I can't really troubleshoot that, but if it still reboots at 1000 or 1200, then it's probably a ROM incompatibility. We'll see if anyone else can test it on Revolver in the mean time.
Hi,
tested your kernel with CNA 1.5.5.3 sadly no wifi.
Now I'm back on stock
Greetings
Nice to see more kernels popping up
I would help you test it, but frankly Im not in the mood to troubleshoot (if needed) today
Been screaming at a PC all day that refused to work properly hehe
Hi guys, me again. So i bring you my SuperStock kernel. The purpose of these kernel's is to provide stock stability with some tweaks from custom kernel's to improve the experience. Made from the LG kernel's with a ram disk modified by me for performance & feature purposes. So let's get down to business then
Features
-Completely Stock LG Built Kernel From Original P920 21E, 20F, & SU760 20F
-Stock Features
-*Standard Clocked @ 1.2Ghz Upto 1.4Ghz (Only If You Have Modules)
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
Installing The Kernel
-Make Sure Your Rooted
-Make Sure You Have CWM
-Copy The Zip To Your SD
-Select Install Zip From Internal/External SD (Wherever You Put It)
-Select The Kernel File
-Simple As That, You should Be Good To Go, Just Restart & Enjoy.
Things YOU Need To Be Aware Of
NOTE: *For The Use Of Overclocking Frequencies You Must Have The Modules In Your Rom. These Are NOT Provided In Bone Stock Rom's. Use The Search Button Or If Your Using A Custom Rom, Then Congratulations You Most Probably Already Got Them. Mine, Thiaiz, Meemo & Accura's Just To Name A Few, Latest Roms Contain These Modules So You Should Be Fine.
You MUST Be Using The Equvalent Or Compatible Baseband For You To Get Signal. If You Dont Have Signal Its NOT The Kernel's Fault. Either 21E(Recommended), 20F, 20P, Maybe 20C & 20G Are Required.
Kernel Source(Ram Disk Only)
@ My Git Complying With GPL & XDA Rules: https://github.com/samno1607
Enjoy!
Changelog
Changelog 03/07/2012
-SU760 Version Added
Changelog 27/06/2012
-Initial Release See OP For Details
Extra's & Stuff
Extra's
Stuff
Love this kernel!
Ok forgive the noob but will either of these work for me or do (I think I do) I need to flash my baseband?
GetRIL tells me my baseband is V20c
If I do need to can someone please link me to the best option for flashing a baseband (V21e?) that will allow me network access in Australia. I really want to try out these kernels and roms!
Sent from my LG-P920 using XDA
Thanks Samno, just what the Doctor ordered.
saint_cow said:
Ok forgive the noob but will either of these work for me or do (I think I do) I need to flash my baseband?
GetRIL tells me my baseband is V20c
If I do need to can someone please link me to the best option for flashing a baseband (V21e?) that will allow me network access in Australia. I really want to try out these kernels and roms!
Sent from my LG-P920 using XDA
Click to expand...
Click to collapse
Should work with 20c but you'd be better of moving to a newer baseband to get rid of GC issues. Will be testing it out later today with 20a before moving to 20g. I'd say go for 20f as that is what Samno has been developing with. You can get it here:
http://forum.xda-developers.com/showthread.php?t=1540163
If you want to go for 20g you'll have to follow a different procedure. There's a video guide in this thread:
http://forum.xda-developers.com/showthread.php?t=1629529&highlight=20g+baseband+flash
If you get issues with 20g check, look here:
http://forum.xda-developers.com/showthread.php?t=1609437&highlight=kdz+offline+fix&page=9
For 21e check out: http://forum.xda-developers.com/showthread.php?t=1635011
samno said:
Hi guys its almost 2 45 in the morning here got to be up for work soon so i'll keep this short & sweet for now.
Features
-Completely Stock LG Built Kernel
-Stock Features
-Standard Clocked @ 1.2Ghz Upto 1.4Ghz
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
For Overclocking Frequencies You Must Have The Modules In Your Rom.
Mine, thiaiz, meemo & accura's latest roms contain these modules so you should be fine.
Flash Through CWM Your Appropriate Version, Reboot, Done!
Enjoy and i'll update this post later.
Click to expand...
Click to collapse
hi samno,
just tried v20f on my phone, i'm on stock v20c, and the kernel seems to be clocked at 1GHz by default. i'm on stock so no initd for me
thanks
More from the noob, and thanks!
Guantonio said:
Thanks Samno, just what the Doctor ordered.
Should work with 20c but you'd be better of moving to a newer baseband to get rid of GC issues. Will be testing it out later today with 20a before moving to 20g. I'd say go for 20f as that is what Samno has been developing with. You can get it here:
http://forum.xda-developers.com/showthread.php?t=1540163
If you want to go for 20g you'll have to follow a different procedure. There's a video guide in this thread:
http://forum.xda-developers.com/showthread.php?t=1629529&highlight=20g+baseband+flash
If you get issues with 20g check, look here:
http://forum.xda-developers.com/showthread.php?t=1609437&highlight=kdz+offline+fix&page=9
For 21e check out: http://forum.xda-developers.com/showthread.php?t=1635011
Click to expand...
Click to collapse
Thanks mate, I have a couple of more questions;
Are APN's built into the ROM's themselves?
If I use this kernel on V20c should the other ROMS suggested in the first post work for me?
I had a go at flashing ThiaiZO3D V2.7.1 on V20c baseband and whilst it worked great I couldn't get any network (I used getril but to no avail).
So much to learn!
Update for those interested, I have flashed ThiaiZO3D V2.7.1 ROM (no network for me usually on this ROM I assume because of V20c baseband?) and then flashed this kernel and all is good so far!
Hi,
I am using your Promethius 1.4+ ROM with Promethius Kernel V1.4.5.1+
Will the SuperStock+ V21E.zip be better than that?
Also one request. will it be possible to use INTERNET PASS THROUGH in O3D ( by using a flashable zip or Add on apk?)
will you be able to help with the internet pass through feature?
desperately need that.
thanks
schubeir
Do Stock rom v21e work with this kernel?
Sent from my LG-P920 using Tapatalk 2
Hi Samno,
flashed this kernel (v21E) on Promethius Rom v1.4 + BB v21E. Everything perfect so far:
-Wifi ok.
-BT ok.
-Music: no stuttering at all (PowerAMP).
-oc: up to 1.35GHz perfectly stable.
Big thanks!
samno said:
Hi guys its almost 2 45 in the morning here got to be up for work soon so i'll keep this short & sweet for now.
Features
-Completely Stock LG Built Kernel
-Stock Features
-Standard Clocked @ 1.2Ghz Upto 1.4Ghz
-Overided Automated Voltage Control
-Standard LG Frequencies
-Standard LG Voltages
-Ram Management Tweaks
-Modules Loaded At Boot
-Init Tweaks
-Init.d Support
-Full Ext4 Mount Compatibility
-Screen Off Frequency Set To 300Mhz
For Overclocking Frequencies You Must Have The Modules In Your Rom.
Mine, thiaiz, meemo & accura's latest roms contain these modules so you should be fine.
Flash Through CWM Your Appropriate Version, Reboot, Done!
Enjoy and i'll update this post later.
Click to expand...
Click to collapse
I don't find Gulliver's travel & Polaris office after i flash your kernel,except it everything's there but without these two superb app your kernel is still not complete stock kernel.:crying:
Having some odd battery behaviour on this kernel with Thaiz V2.7.1 ROM. Seems to stay at the same percentage for a while then has a huge drop.
Have rebooted a few times and fully charged and now the drain is rather fast. Anyone else having these issues?
Sent from my LG-P920 using XDA
So far so good phone performance wise, Running Promethius 1.4 BB 21E.
Can't say if I have more of a battery drain with this Kernel compared to Promethius Kernel 1.4, as I am currently doing a bunch of stuff on my phone to check stability. But it does seem like it is draining faster.
Had it overclocked to 1344 without any issues, phone started lagging at 1400 though. I currently have it set back to default speeds as the phone was starting to get hot.
Also wanted to add that my music hasn't skipped since I put this kernel in. Using the Stock Player with Dolby Mobile On. I have it full volume out to my computer line in.
thx for your job! but bluetooth not working for me (rom: prometheus 1.4+ kernel: stock+, prom 1.4.5.1+, and superstock+)
wreedx said:
thx for your job! but bluetooth not working for me (rom: prometheus 1.4+ kernel: stock+, prom 1.4.5.1+, and superstock+)
Click to expand...
Click to collapse
If you installed bluekernel, it's a common issue. You will have to reinstall the rom again
Sent from my LG-P920 using xda premium
yes...thx!
and...if internet is turning off (3g & wifi), and restart phone, after booted, the screen cyclically switched on.
when i turn on the internet, this problem disappears...
I only have it?
2.3.5 STOCK
IAM USING DEFAULT STOCK ROM 2.3.5 v21e and rooted. Will the kernel work on 2.3.5 stock?
oR i should have download other rom?
barkat ali said:
IAM USING DEFAULT STOCK ROM 2.3.5 v21e and rooted. Will the kernel work on 2.3.5 stock?
oR i should have download other rom?
Click to expand...
Click to collapse
it will work
Sent from my LG-P920 using xda app-developers app
I flashed it over stock 21E. But nothing visible changed. CPU is still on 1GHz and can't be overclocked using an app. What went wrong? I erased Dalvik-cache before and after the Kernel flashing (if it makes any difference).
Hi Friends,
Was Roaming around all over Tamil nadu and with my Nikon taking precedence over mobile, was away from laptop for few weeks. Now am Back with a kernel. With JB development going in photon speed, it may luk odd with a development work in ICS. But for those who are still persisting in ICS, it may matter. It is still a beta version. It has only the features that are listed below. Planning to add more features soon.Test and let me know on Battery drain, Performance and Deep sleep.
Features:
Based on Samsung ICS Update 2 Source
eMMC brick bug disabled
Pre-rooted
Overclocked - Currently added 1.2 Ghz alone
RAM Hack - Thanks to Adi_Pat
Governors - Conservative, Interactive and Performance
Schedulers - Noop, Deadline and CFQ
BLN Support with liblights - Thanks to Adam77Root
Custom Boot Animation Supported
Few Ramdisk tweaks
Auto-brightness fix - Thanks to Ardatdat
Voodoo sound patch
Download - Dropbox
Features working on:
Intermediate frequencies for OC
Custom Voltage
Memory Management and Misc tweaks
Kernel Source - Github
reserved
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Just flashed the kernel. For some reason unable to use WiFi. Not being detected. Initial reactions: pretty smooth. I'm on bb rom. Will test for a while and update.
Sent from my GT-I9103 using xda app-developers app
drarunmmc said:
Is this exclusive for mazel rom?
Or can we use this in stock ics?
Click to expand...
Click to collapse
it can be used on any ice based rom:screwy:
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
---------- Post added at 07:40 AM ---------- Previous post was at 07:33 AM ----------
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
Thank you selva for the effort buddy:beer: so
used the kernel for a while.
Pros
1. Deep sleep perfect
2. Zero game lag. Tried with Subway surfers
3. Silky smooth
Cons
1. WiFi not working/connecting even after wiping cache/dalvik.
As I don't have much 2g data left for this month reverting back to ardatdat beta 6.
Sent from my GT-I9103 using xda app-developers app
@amar I set the set cpu to 1ghz only and rebooted buddy. It did not go to 1.2
Sent from my GT-I9103 using xda app-developers app
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
HIt tHnX iF i hElP u
Sent from my GALAXY RoYaL
amar1548 said:
buddy I used ur kernel , but the battery life is terrible,
I think it is because of oc , I set it to 1ghz but for some reason it stays in 1.2ghz, I checked in CPU spy...
so my suggestion is to delete the oc because no one is using it
although with this kernel the phone runs very smooth and snappy
Click to expand...
Click to collapse
amar1548 said:
I used rom toolbox before and now I use set CPU everything is fine now and I also try temple run no glitches whatsoever
btw Selva buddy can u release two kernels one with oc and the other without oc......
Click to expand...
Click to collapse
Battery Life, yes it may be terrible as its only beta version. Its not because of OC. Its because i have not included all the tweaks needed for battery life. Still its in testing stage. Reason for including OC and having only 1.2 ghz is to test whether its preventing the game lag. Generally when i OC with limits and intermediate ranges as 1.1, 1.2 and 1.3, mostly the mobile clock in 1.1 ghz and very rarely going to 1.2 ghz. So i skipped 1.1 and included only 1.2 ghz.. Just a testing.
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Adam77Root said:
Will you add BFQ scheduler at a later stage? I have good experience with that and have been using it since I moved permanently to CM.
Sent from my CM10-powered GT-I9103
Click to expand...
Click to collapse
Have not thought about it. Will check on it once im done with other basic stuffs. Surely will get in touch with u when including the scheduler.
MaZel Kernel v1.0 Beta-2
MaZel Kernel Beta-2 has been uploaded in dropbox.
Features added:
Auto Brightness fix
Voodoo Sound patch
Few tweaks
Please test and let me know guys.
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
dragosh01x said:
Regarding the annoying lags and freezes in ICS, could this kernel for the Galaxy Tab 2 10.1 be of any help : http://forum.xda-developers.com/show....php?t=1950052 ?
Click to expand...
Click to collapse
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
selva.simple said:
Problem with the link u provided buddy...Returns 404....few users reported that with this kernel, they didn't get lags...You can try and let us know..
Click to expand...
Click to collapse
Let's try again : http://forum.xda-developers.com/showthread.php?t=1950052 - it's a "fixed" kernel by codeworkx for the Galaxy Tab 2 10.1, my other device, which also had serious lags and freezes in ICS as our Galaxy R. Hope there is magic you can add from that to your kernel.
Ok now..included intermediate freq of 1100 and then the BFQ scheduler as suggested by Adam. Getting few compiler errors for BFQ. Will check it tomorrow.
And finally setup the environment for AOSP build. As Ubuntu 12.04 was not supporting all the branches to do AOSP build (though its gud for kernels), now setup a diff environment using 10.04. Will Start init/sync tomorrow.
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Adam77Root said:
Nice work buddy! You can spare a lot of upload bandwidth by adding a '.gitignore' file. It tells git to ignore the specified files so they will not be pushed. Get one (specified for kernels) here: https://github.com/Adam77Root/android_kernel_samsung_i9103/blob/jellybean/.gitignore
Click to expand...
Click to collapse
Thanks a lot buddy. I surely need tat because of my poor data bandwidth.
Testers needed for CM10 kernel
Friends,
Need some testers for a new CM10 kernel. I have not even tried it as im doing some testing with ICS kernel in my device. So those who are about to test, have a back-up and then test this kernel. No special features added yet. Just wanna check whether its boots-up in cm10.
Link - MaZel CM10 Kernel
Sooo...did you find anything useful in that blamesamsung kernel : http://forum.xda-developers.com/showthread.php?t=1950052 ?