Database Info

Jogging Armband for the N1

Doing a bit of research and came across these:
* Tuneband for Nexus One (US Amazon)
http://www.amazon.com/Tuneband-Grantwood-Technologys-Silicone-Protector/dp/B003GMHJAS
* iGadgitz (UK Amazon)
http://www.amazon.co.uk/iGadgitz-Neoprene-Sports-Jogging-Armband/dp/B003QJ6MR2/ref=pd_rhf_p_t_1
* Belkin Sports Armband for iPhone 3GS (UK Amazon)
http://www.amazon.co.uk/dp/B002CVCK...de=asn&creative=22206&creativeASIN=B002CVCK0S
And a few others.
Also - a lot of iPhone straps, but not a lot of confirmation, despite the similar dimensions, that the N1 will fit snuggly.
Anyone tried any of these who can advise on which are good \ bad? Any good ones I have missed?

There was a lot of arkmband discussion on another thread...maybe some scoop there.
Found it: http://forum.xda-developers.com/showthread.php?t=672443&highlight=armband

I rock the tuneband, its solid enough... i wish the strap was wider for a bit more support for the phone but definitely does the job...
I put on the screen protector as well for ****s and giggles and its actually not bad

Just Ordered the Iarmband one. Will let you know how it fits when it gets here.

JHaste said:
I rock the tuneband, its solid enough... i wish the strap was wider for a bit more support for the phone but definitely does the job...
I put on the screen protector as well for ****s and giggles and its actually not bad
Click to expand...
Click to collapse
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.

Slip it in between your heart rate monitor band its not in the best position but it works for me.
Sent from my HTC Desire using Tapatalk

cigar3tte said:
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.
Click to expand...
Click to collapse
yea it jostles around a bit... i would recommend you strap it high enough to tuck a sleeve over it

I run with the Belkin armband (from when I had an iPhone), and sony bluetooth earphones. I find it fits the Nexus quite snugly, the sound quality is great even while sprinting and no cables!

for those of you with a tuneband, does the phone fit with a case?

alvinleephd said:
for those of you with a tuneband, does the phone fit with a case?
Click to expand...
Click to collapse
It fits perfectly, but I haven't dared to do hard sprinting with it yet, since it's not a full coverage. It's like a silicon sleeve and the band goes through the back of the sleeve.

http://www.officedepot.com/a/products/412983/XtremeMac-Sportwrap-For-iPhone-Black/
This works perfectly for me. The normal way of using it with the iPhone will not work with the nexus because the hole for the 3.5mm jack is on the wrong side. Rather than destroy the thing, I put it on upside-down and it has two holes on the bottom, one of which I can use. Also this way the flap that allows you to slide the phone in and that's supposed to keep the phone inside the thing is on the top and somewhat secure thanks to the 3.5mm plug. Also, I've used it on about 15-20 different runs and it's never bothered me or showed any signs of wear.

http://www.iarmbands.com/product.sc...2809C526C754451921A.qscstrfrnt05?productId=21
Got it.. Ran 3 miles today, did back and biceps! Cord NEVER got in my way, and stayed plugged in the whole time!! **** YEA
Never even felt it was there, i can still swype text. Never really even thought it would be comfortable. I had to put it up higher than my bicep... If you have over 17" Biceps this would be a uncomfortable product.

has anyone else found any decent ones?

has anyone else found any decent ones?

cigar3tte said:
Have you done hard sprinting with it? I love my Tuneband, but haven't dared to run full sprint with it.
Click to expand...
Click to collapse
Really? I've done full-out sprints with the tuneband, no problem.

zok-star said:
has anyone else found any decent ones?
Click to expand...
Click to collapse
Try the one I linked to. I'm pretty sure you wouldn't be disappointed.

non of these places ship to Australia

I use the Belkin Sport Armband - but I wear it around my wrist so the N1 ends up riding like a big flat watch. The RunKeeper app is really well done, and wearing it like this allows me to see pace and distance, etc.
I haven't tried it with headphones yet.

I just got my Tuneband a couple of days ago. The days I got it I used it one the treadmill for a 30min jog at 6mph and no issues. Yesterday I used it at the gym on the weight machines and no issues either. I figure if it the N1 did pop out at least the speaker wire should keep it from hitting the floor. But it felt solid the whole time. Good product, especially when it was 12.99(?) on sale at amazon.

I ended up buying some iphone armband for like $7aud. Went for a 10KM jog the other weekend, and i cant fault it!!!
I had to cut a hole for the nexus one head fone jack but other than that perfect! Just on the outside of the where the phone sat was sweaty but inside not one drop!

[DIY] Nexus One car holder

Hi,
Here is my new DIY Nexus One car holder I just put together:
The base is from Garmin nüvi 200 series and the holder for phone is just plain hard shell I bought very cheap from eBay.
What do you think?

Rinegpeace said:
Hi,
Here is my new DIY Nexus One car holder I just put together:
The base is from Garmin nüvi 200 series and the holder for phone is just plain hard shell I bought very cheap from eBay.
What do you think?
Click to expand...
Click to collapse
Curious how it holds up in the car, but looks pretty good and low profile.

khaytsus said:
Curious how it holds up in the car, but looks pretty good and low profile.
Click to expand...
Click to collapse
It looks great and slim also holds phone quite well.
Here are few photos in 'action' (sorry for the mess in my garage):

That looks really good. Much better than my "universal" POS that wobbles and rattles and occaisonally drops my phone:
http://www.halfords.com/webapp/wcs/...uctId_381889_langId_-1_categoryId_165452#dtab
Can you link to the case you bought (or a similar one) please?
And where did you get the base? Was it a spare you had?

b0dge said:
That looks really good. Much better than my "universal" POS that wobbles and rattles and occaisonally drops my phone:
Can you link to the case you bought (or a similar one) please?
And where did you get the base? Was it a spare you had?
Click to expand...
Click to collapse
I'm new user and I am not permitted to post outside links.
For case just search for 'BLACK HYBRID HARD BACK CASE FOR HTC GOOGLE NEXUS ONE' on UK eBay.
For base search 'GARMIN NUVI WIDESCREEN MOUNT FOR 200, 200T, 200W & MORE' - you will get several results from Hong Kong - they are very cheap.
I've attached photo of this mount.
You just have to cut off two horns on Garmin cradle and stick it on case with some thin mirror bond sticky pads.
Hope this is not too confusing.

Not confusing at all. You've made the whole thing very clear, in fact!
Thank you for the info. I'll be making mine very soon!

WOW BRILLIANT IDEA. JUST ORDERED THE PARTS. Do you think it's better to use superglue instead of mirror adhesive?

maniaxzero said:
WOW BRILLIANT IDEA. JUST ORDERED THE PARTS. Do you think it's better to use superglue instead of mirror adhesive?
Click to expand...
Click to collapse
Thanks. I'm glad you like it.
I think superglue will also works but I put mirror tape for future considerations - it will be easier to remove tape and change shell case when I change phone.

Rinegpeace said:
Thanks. I'm glad you like it.
I think superglue will also works but I put mirror tape for future considerations - it will be easier to remove tape and change shell case when I change phone.
Click to expand...
Click to collapse
lol you're always one step ahead of me. Thanks for the idea

Haha I have the exact same holder and a very similar case and I was trying to come up with a way to make them work together. I hadn't considered getting another case and then modifying the garmin holder. I'll be doing this as well!

Rinegpeace, can you please give some comment about the quality of the back case? How thin is it? rubbery on the inside/outside? Would you feel comfortable using the phone with the case on all the time?
Thanks in advance!

zecoj said:
Rinegpeace, can you please give some comment about the quality of the back case? How thin is it? rubbery on the inside/outside? Would you feel comfortable using the phone with the case on all the time?
Thanks in advance!
Click to expand...
Click to collapse
For everyday use I would pick little harder case. This one is thin and it is very easy to pull phone in and out. This is preferable for car dock but for real case it is maybe too flexible.
After couple days of testing I feel very secure about holding my N1 while driving and even if you turn this dock upside down it will hold your phone in the cradle. So, maybe you will like it as everyday case.

Here is one short video of detaching and attaching my N1 in this car dock:
http://www.youtube.com/watch?v=t6xsHC_RQXA

that's awesome, thanks mate!

You can also get the air vent mount for the nuvi instead of the suction mount. I kinda don't want it to stick to glass so this is nice.
what are those mirror adhesive pads? buy them at home depot?

shkwest said:
You can also get the air vent mount for the nuvi instead of the suction mount. I kinda don't want it to stick to glass so this is nice.
what are those mirror adhesive pads? buy them at home depot?
Click to expand...
Click to collapse
You'd be better off finding them at an automotive store or maybe walmart if they are to repair a rear view mirror that fell off inside a car as I'm suspecting.

This has been featured in Lifehacker some weeks ago, with the same materials... the idea was from a OcUK user.
I've already made one myself for my HTC Legend and it looks great, it was cheap, and it's really sturdy.

Is it me or does the first photo in the original post look like it has a windows logo!?!

This is a great idea. I just finished it for my Touch Pro 2 with no problems. I hvae a slight difference though. I cut the very top off of the silicon case so that my tp2 can slid in and out with ease. Although there is plenty of friction to keep it in normally.
I just wanna say that after 2 days of using this in my car it is just working absolutely perfectly. The easy rotation is very convenient and it looks really good as well, being so form fitting to my phone.

Now that is cool.
I shall be getting the bits this week.

Droid Charge Holster / Case Combo - Feedback needed

http://www.amazon.com/gp/product/B0051HAYQ2/ref=ox_sc_act_title_1?ie=UTF8&m=A16LRMPAGNQB4W
Thinking of picking this up, but wanted to know if anyone here uses it and can comment on it before I pull the trigger.
Thanks!

corys00 said:
http://www.amazon.com/gp/product/B0051HAYQ2/ref=ox_sc_act_title_1?ie=UTF8&m=A16LRMPAGNQB4W
Thinking of picking this up, but wanted to know if anyone here uses it and can comment on it before I pull the trigger.
Thanks!
Click to expand...
Click to collapse
I have it and like it!

corys00 said:
http://www.amazon.com/gp/product/B0051HAYQ2/ref=ox_sc_act_title_1?ie=UTF8&m=A16LRMPAGNQB4W
Thinking of picking this up, but wanted to know if anyone here uses it and can comment on it before I pull the trigger.
Thanks!
Click to expand...
Click to collapse
i have it too.. i like it as well.. the kick stand is cool

corys00 said:
http://www.amazon.com/gp/product/B0051HAYQ2/ref=ox_sc_act_title_1?ie=UTF8&m=A16LRMPAGNQB4W
Thinking of picking this up, but wanted to know if anyone here uses it and can comment on it before I pull the trigger.
Thanks!
Click to expand...
Click to collapse
after seeing a coworker's Bionic (lucky bastard ) which had the same style case with kickstand (apparently they sell those at the verizon store) I bought one from amazon as well. It should be coming tomorrow, so hopefully I can give a more thorough review. I've been looking for a kickstand case for a while, and none have been even remotely slim except this one.

just got this case. From what i can tell... it checks all the right boxes for a case. its light, its thin, its slightly soft but still durable, and most importantly, IT HAS A KICKSTAND. My only concern is the durability of the kickstand as it seems like the hinges and movable parts feel flimsy even though the rest of the case feels solid. On the plus side there are no folding plastic bits which you know will eventually snap.

Bad ass case, I love it. I had it for my Droid 2, Fascinate and my Charge.

I have one. I love it, and the kickstand is pretty sweet feature for watching stuff at lunch break in the conf room.
I broke off my clip eventually as I am always catching it on something while getting in and out of equipment and my desk chair. (kinda a wide ass). I super glued it back on with some Barn's FSA Adhesive and it's back in business.
Best case/holster I have had of all time.

It's pretty good for all of the reasons already stated, but my only complaint is that it's kind of a pain to get the case off if you're a guy like me who needs to remove it twice a day in order to switch batteries. That's all.

I have it
I got mine in a package deal when I purchased my phone. I love it, keep the phone nice and secure. I love belt clips, especially when you can rotate it. Sometimes I clip it to my messenger bag to catch videos of my bike rides. Once you start using the kick stand, you can't go back. Get it from verizon so if it breaks, they will provide you with a replacement.

Is it really made by Samsung? I need one of the "holster" with clip, so that I could use it while at the gym.

I just bought a new spare of these holsters from Amazon for $6.00. I go through a couple a year and don't want to come up short.
These are the Verizon ones and are pretty nice.
Sent from my Verizon Droid Charge using the Tapatalk App

dmwagner said:
I just bought a new spare of these holsters from Amazon for $6.00. I go through a couple a year and don't want to come up short.
These are the Verizon ones and are pretty nice.
Sent from my Verizon Droid Charge using the Tapatalk App
Click to expand...
Click to collapse
I can't seem to find the item on Amazon that you mentioned. Actually, I'm really just interested in the case part that attaches to the phone, I already have the part that has the belt clip. Have you seen where to get those?

xdadevnube said:
I can't seem to find the item on Amazon that you mentioned. Actually, I'm really just interested in the case part that attaches to the phone, I already have the part that has the belt clip. Have you seen where to get those?
Click to expand...
Click to collapse
Right here bud:
http://www.amazon.com/gp/product/B0051HAYQ2/ref=oh_o01_s00_i01_details

Dam.sweet ass case

I got this the other day from Amazon. It's a great value at around 8 bucks. I'm enjoying it So far.

Bike mount for Desire Z

Hi,
any experience of having this phone as bike computer?
I ve used my last year just for GPS tracking - turned on and put it to the bag. Now Iam looking for good bike mount, that would allow me to use this as normal bike computer.
Thx for answer

I'm assuming a motorbike? what type? Does it have a visor? If you do, you could probably get one of the suction cup arm mounts and have the phone on that. A clamp system would probably work better though, for security.

i would also like one too,
but for a bicycle
any idea? =D

I would love to have one for my motorbike too!! .. but I think it's hard to find something compatible with our desire z

For bicycle holders, there is this: http://www.ebay.com.au/itm/Bicycle-Bike-Mount-Holder-Cradle-HTC-Desire-HD-Z-/120645190552.
I haven't actually got it on my bike but another user on another forum has it and said it's pretty good for his use.

I just got me one of these
I ended up cutting the bike mount off as I only wanted it for the dry bag (touch screen still works)
Might fit the bill?

waydownsouth said:
I just got me one of these
I ended up cutting the bike mount off as I only wanted it for the dry bag (touch screen still works)
Might fit the bill?
Click to expand...
Click to collapse
Did you buy it? i am also looking for a bike "attachment" for my dZ ...

If you've got the otterbox case like I do, this is nice.
http://www.ebay.com/itm/140529480135?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_2549wt_1163

I use the "ultimate add-ons" one from Amazon on my motorbike. £20, comes with a 2 piece mount and waterproof case. Touchscreen works through the case too, so that's pretty handy. Some people have said the mount is flimsy and doesn't feel secure, but I just done mine up nice and tight and it is fine.
http://www.amazon.co.uk/UltimateAddons-Motorcycle-Release-Resistant-Desire/dp/B005EQQV0I/ref=sr_1_4?ie=UTF8&qid=1332417582&sr=8-4

havingadump said:
I use the "ultimate add-ons" one from Amazon on my motorbike. £20, comes with a 2 piece mount and waterproof case. Touchscreen works through the case too, so that's pretty handy. Some people have said the mount is flimsy and doesn't feel secure, but I just done mine up nice and tight and it is fine.
http://www.amazon.co.uk/UltimateAddons-Motorcycle-Release-Resistant-Desire/dp/B005EQQV0I/ref=sr_1_4?ie=UTF8&qid=1332417582&sr=8-4
Click to expand...
Click to collapse
Ooo very nice
but too bad only from the UK
shipping to canada is gonna be a killer =[
otherwise i'd jump it

there's tons of stuff on ebay to hold your z down.
make a dyi and buy some super strong velcro and have it detatchable :laugh:

So out of the few choices available, which is really the "best" for the G2/Dersire Z? I don't want to buy one that isn't any good, but I don't want to purchase anything really expensive either. I was skeptical about this one mainly due to the fact that it looks like it'd fall out (on a biycle, not a motorbike).

Anyone know someone that has tried this out?
http://www.amazon.com/Arkon-SM427-U...=1345050697&sr=8-1&keywords=htc+g2+bike+mount
I really dont want my G2 flying off on the highway lol. There really aren't that many options to choose from, kinda sucks.

Pop Sockets

Anyone using Pop Sockets for the v10 they're a life saver for people with tiny hands lol but also since the phone is a bit heavy this is useful for anyone!!! Got mine at TMOBILE but they're cheaper on the website! You can even make custom ones
(tried posting a link and pic but it won let me:crying

vexter777 said:
Anyone using Pop Sockets for the v10 they're a life saver for people with tiny hands lol but also since the phone is a bit heavy this is useful for anyone!!! Got mine at TMOBILE but they're cheaper on the website! You can even make custom ones
(tried posting a link and pic but it won let me:crying
Click to expand...
Click to collapse
Pretty interesting product. I like the fact that they seem to lay a little flatter than the FlyGrip. I'd definitely pick up the case with the sockets integrated into it but they don't seem to offer one for our phone.
http://www.popsockets.com/

sigmaxaa said:
Pretty interesting product. I like the fact that they seem to lay a little flatter than the FlyGrip. I'd definitely pick up the case with the sockets integrated into it but they don't seem to offer one for our phone.
I like that it's reusable and can be moved around wherever you want
I have it pretty much in the middle of the phone's back in the outside of my phone case which saved me from having to buy a new case since it also functions as a viewing stand! Neat little gadget for bigger devices and tiny hands
Click to expand...
Click to collapse

The girl who waited on me when I was buying my v10 was using one on her phone and really liked it.
I was tempted but since I already had my flygrip I decided to save the 14.99 (for a 2 pack in store)
If they had been selling 1 for $7 I probably would have bought it!
It's really the first time I've seen one of this type of product available in store vs online. It's about time!
Glad to hear it's working for you and that it's available with different options online.
Now I have another choice if I want something new!
Sent from my pretty nifty brand new LG V10

Lol one in the kitchen one in the crapper

sigmaxaa said:
Pretty interesting product. I like the fact that they seem to lay a little flatter than the FlyGrip. I'd definitely pick up the case with the sockets integrated into it but they don't seem to offer one for our phone.
http://www.popsockets.com/
Click to expand...
Click to collapse
lol. Yes, one in the crapper is always a good idea:good:

TonyStark said:
lol. Yes, one in the crapper is always a good idea:good:
Click to expand...
Click to collapse
I know, right??? I almost fell out of my chair when I heard that...actually rewound the video a little to make sure I heard it right! Hilarious!!!

Looks cool but how would that work when the v10 has cross stitch grip backs... The case I have also has rubber grip back...

r109 said:
Looks cool but how would that work when the v10 has cross stitch grip backs... The case I have also has rubber grip back...
Click to expand...
Click to collapse
+1...sounds like a great idea but im wondering how well it will stick to the v10

I'm pretty sure it's just using the 3m adhesive which is the same thing my flygrip uses. No problems here. It's stuck on nice and tight.
Sent from my pretty nifty brand new LG V10

r109 said:
Looks cool but how would that work when the v10 has cross stitch grip backs... The case I have also has rubber grip back...
Click to expand...
Click to collapse
It should work fine either way mine is functioning fine on my case and you can move it around whenever you want

I picked one up from Amazon while Christmas shopping. I had never heard of them before seeing this thread a few weeks ago.
I have to say, it's an awesome product. Works great as a stand while watching videos, and really helps in handling such a large device. Hitting the second screen with one hand is easy now.

knifedroid said:
I picked one up from Amazon while Christmas shopping. I had never heard of them before seeing this thread a few weeks ago.
I have to say, it's an awesome product. Works great as a stand while watching videos, and really helps in handling such a large device. Hitting the second screen with one hand is easy now.
Click to expand...
Click to collapse
No one has/had any issues with it detaching from the back of our wafflesque surface phones? I like the product and could see using it, but I'm looking for confirmation that it worked on a stock phone without a case.
Thanks in advance for replies.

I have used one on my phone without a case. It worked great. I took it off when I added a Spigen case and have been too lazy to put it back on. My wife is very small and she loves it on her Samsung S3 phone. And yes you can take them off and reuse them over and over. Nice invention.