tried updating with software from ZENITHINK US, the screen said the image update failed. Unplugged then rebooted the device and there is nothing but a black screen...lol
If it is bricked, can it be unbricked? I could build a jtag if neccessary, but I'm not too sure I can make this thing go...
Any help would be nice.
Related
Does anyone know how to un-brick a Motorola Cliq Xt/Quench? If possible...I recently bricked it (tried to load a custom recovery unsuccessfully). I used RDS lite v4.6 to restore it to stock version but it failed. I turned on my phone and went to and did a factory reset (i really don't know why.... i'm to much of an idiot) it turned off and back on but this time it to a blue screen displaying my phones info usb fastboot, machine id, and build date and S/N and says below ** Security on, fastboot disabled**
can any one help, please?
I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hey guys, I've accidentally hard bricked this tablet (SGH-i497) by flashing the wrong recovery image. No download mode or recovery, black screen only. Computer only sees it as qhsusb_dload.
What I'm wondering (obviously short of a JTAG repair) is if anyone could potentially make a working backup of their model using QPST as a last ditch effort? I want to see if this can restore it, and I know it's a long shot.
Hello
I have a soft bricked (?) p40 pro , after downgrading to a wrong firmware version, the phone booted up normally inside android and was working for a while.
But after trying to OTA update it, the phone went into a bootloop. Failed at installation and restarted.
I can access now only eRecovery and Fastboot modes.
I can't get it recornized by a PC with usb, i dont know if i do something wrong.
eRecovery also doesn't work. It managed to find once a package, downloaded it and while installing the deviced rebooted and went into bootloop again.
Now its stuck to unable to find package info.
Haven't try dload from usb-tongle, because i dont have any usb tongle / adapter. Im willing to get one to try out, if i can flash anything from there.
I went to a service shop, they said they tried with test point and they still didn't find a work around it. Maybe they lack experience on this device.
If someone can help me please, im very desperate
I had the phone only for 4 hours
Thanks
Alex