Related
Well, i rooted my phone and that work then i wanted to install rom tryed that and used. An app called ROM manger and installed cyanogenmod 7 that happend but it kept doing the same thing with the andriod dude on the skateboard going around on the screen... did something to the phone with the clockwork recovery thing and then that was gone now the htc white screen boots up but just sits like that what can i do to fix this.... help please pretty big nooob i was dumb for doing this and didnt know what i was doing hopefully i can get my phone up and runing thanks
nobody can help?
Its better to flash a rom manually. And defenitely need to make a backup before you flash anything.
You also need to download titanium backup. It back ups your apps.
Now you need to boot into recovery, wipe data, cache, go to mounts and storage, then format cache boot. And dalvik cache. Then you go to install from sd card and install the rom from there(which means you have to put the rom file on the root of your sd.) Download from the comp and do it.
You need to wipe everything before you flash a rom.
And please read before doing anything.
________
Evo SHIFT
Evervolv ROM
x99 kernel
i know how to wipe the data, cache but i cant find the format cache boot and how do you put the rom on the root of the sd card sorry im a big noob at this :/
To format, you must go into mounts and storage and its in there. And since your on stock rom, you need to plug your phone into your comp via USB cable. A screen pops up on your phone, and set it to disk drive. Something should pop up on your comp, click on open files to view in folder, (if your on windows), then drag and drop. Don't drop into any folder. Just drop into main one. You obviously have to download the rom you want. There located in the developement section of this forum. I tried to explain as noobish as I can... I was once in your place.
________
Evo SHIFT
Evervolv ROM
x99 kernel
thanks mann! when i download the rom do i have to excute them/ is the thing that i need to format called - format /cahce
thing is my phone doesnt boot up so i cant get into my phone to set it to disk drive thats the thing
thanks so much man got it fixed !!!!!!!!
for those who are sufferring similar problems (i got this a few times myself) go back to the bootloader (vol. down+power) do a factory reset and cache wipe, then reinstall and it should load fine.
Hello Friends...
i'm a newbie
and i recently rooted my htc explorer
i just went through all the forums and threads regarding the ROM and Overclock
i'm unable to understand
Please help me out what to do with the phone after rooting it.
Can i play Modern War Fare, PES and FIFA in it..??
I have few doubts..
1.What is Clockworkmod, What to do with it. If backup is needed, how to take a backup?
2.How to take a Backup of stock ROM.?
3.How to install Custom ROM??
4.Can I Get Cyanogenmod in my phone??
ThaNkss
:laugh:
First install recovery from here
cwm recovery is a poweful tool to backup,restore,flash roms,also helps in formatting,partitioning,wiping cache from sd card
To install custom Rom -
Now firstly download any Rom that you like
Now put it in root of your sd card
just take out the battery and reinsert it
Now hold power key and volume down key for few seconds
You will get cwm recovery now select wipe data partition,wipe cache
Now select install from sd card select the file and select yes
Wait for some time to get it install
Reboot and now your new Rom is install
to backup a rom simply select backup and restore, then select backup in cwm recovery
For info about roms,themes,developments,tricks see this thread every thing about htc explorer
explorer also has working cm9 you can try it from here
cm9.1
Sent from my HTC Explorer A310e
soulheart17 said:
First install recovery from here
cwm recovery is a poweful tool to backup,restore,flash roms,also helps in formatting,partitioning,wiping cache from sd card
To install custom Rom -
Now firstly download any Rom that you like
Now put it in root of your sd card
just take out the battery and reinsert it
Now hold power key and volume down key for few seconds
You will get cwm recovery now select wipe data partition,wipe cache
Now select install from sd card select the file and select yes
Wait for some time to get it install
Reboot and now your new Rom is install
to backup a rom simply select backup and restore, then select backup in cwm recovery
For info about roms,themes,developments,tricks see this thread every thing about htc explorer
explorer also has working cm9 you can try it from here
cm9.1
Sent from my HTC Explorer A310e
Click to expand...
Click to collapse
or you can try jaggy rom 3.2.1 based on stock rom
Thank You For JAGGY ROM
Hpsgill said:
or you can try jaggy rom 3.2.1 based on stock rom
Click to expand...
Click to collapse
Thank you for Jaggy ROM
:good:
I have successfully installed it..
But the problem is that the internal memory is still low.
its 55 Mb
i have followed the procedures mentioned in the threads..
but in vain..
please help me out
have you partitioned your sd card?
if yes,and then also getting same problem then in a2sdgui select move and rebuild, followed by rebuild dalvic cache
Sent from my HTC Explorer A310e
Install Apps
Install apps Like Titanium backup,setcpu,etc.which will help you to increase ur cell capacity after that u hv rooted ur cell
archit datta said:
Hello Friends...
i'm a newbie
and i recently rooted my htc explorer
i just went through all the forums and threads regarding the ROM and Overclock
i'm unable to understand
Please help me out what to do with the phone after rooting it.
Can i play Modern War Fare, PES and FIFA in it..??
I have few doubts..
1.What is Clockworkmod, What to do with it. If backup is needed, how to take a backup?
2.How to take a Backup of stock ROM.?
3.How to install Custom ROM??
4.Can I Get Cyanogenmod in my phone??
ThaNkss
:laugh:
Click to expand...
Click to collapse
Or else if you want to skip all the tedium......an ideal rom would be NEXTGEN 1.2
it's better because the development is still active and no problems....no overlays and bugs.....also the tutorial is noob friendly....An ideal replacement to A BUG FREE CM9
After rooting, you get (near)complete control over your device for your warranty. You can do almost everything your device(and your experience level) can handle.
If you want to play very safe, you can just try the new root only apps in market.
If you don't like the way Sense looks, you can use UOT Kitchen to cook a custom theme for your phone.
If you want to tinker with your phone's performance, you can use a variety of scripts and flashable zips for Explorer.
If you run out of internal memory and want to extend it, you can use Link2SD.
If those tweaks don't cut your hunger to customize, you can try using new ROMs. And yes, you can use CyanogenMod 9.
archit datta said:
Thank you for Jaggy ROM
:good:
I have successfully installed it..
But the problem is that the internal memory is still low.
its 55 Mb
i have followed the procedures mentioned in the threads..
but in vain..
please help me out
Click to expand...
Click to collapse
Try moving app data to sdcard in titanium backup
Sent from my HTC Explorer A310e using xda app-developers app
thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..
Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse
No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm
Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise
cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse
thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..
edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:
ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.
So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app
what made me root my explorer was the fact of the low internal memory and i after i found out i could use a partition on my sd card to use as internal memory i started to search for more info.
But its too confusing what ROM do i use if i need one how to setup the partitions etc.
what do they mean to wipe everything before inserting a new rom do they mean the phone the sd card.
I could use some help lol
thx in advance
brigas
Partition your sd card and create ext 2/3/4 partition using mini partition tool in computer.
Wiping everything means to format everything thing like cache partition, dalvik cache, system, boot, data partition SD ext ..... In recovery.
Don't format SD card.
Here you can select ROMs, scripts, kernels and tutorials for much more.
http://forum.xda-developers.com/showthread.php?t=1754876
Hit "THANKS". If this helped.
yeah i am currently checking that thread i used one of the links to root my phone. but now i kinda nervous on doing the next steps. i already did a backup of my sd card and my rom i think with the ClockworkMod recovery, So correct me if im wrong the next steps are:
Delete data from sd card and partition it into 4 partitions. with that partition mini tool
do a factory reset on the phone( i suppose is how u wipe everything)
and then use recovery to put the new Rom of my choosing.
is this right?
Follow this for creating ext partition.
Create only Only one ext partition.
http://www.noypigeeks.com/android/tutorial-a-guide-to-link2sd/
For flashing ROM, follow the instructions given on the thread of the ROM.
Basic method is
Reboot into recovery.
Format/wipe data
Wipe cache
Wipe dalvik cache in advance(menu)
Format SD ext, system, boot, in mounts and storage.
Now select install zip from SD card/chose zip from SD card/navigate to your ROM's directory/select it and yes to confirm.
Wait. After it says install from SD card completed. Reboot the phone.
You are done.
First boot of every ROM may take a little long. Wait and don't panic.
Some ROMs needs mounting ext, data,cache etc. Check the thread for that. I hope it'll help to get started.
Hit "THANKS". If this helped.
thx a lot man. Finally an explanation i can follow, thanks a lot guy i really appreciate it.
And if you dont mind me asking, what ROM are u using or had best experience with?
noobexplorer said:
thx a lot man. Finally an explanation i can follow, thanks a lot guy i really appreciate it.
And if you dont mind me asking, what ROM are u using or had best experience with?
Click to expand...
Click to collapse
hi
assuming u have unlocked ur bootloader and have rooted then u need to add CWM for u to try the roms see below link for details. and best rom well u need to try them almost all of them are good its just that u need to find out for ur self which is best for u
link for CWM : http://forum.xda-developers.com/showthread.php?t=1415223
use this CWM for the 1st time latter on u can try the twrp
and u can creat a EXT2 part from this cwm but remember to take a backup of ur sd before doing it as it will wipe ur SD clean
happy flahing:good::laugh:
noobexplorer said:
thx a lot man. Finally an explanation i can follow, thanks a lot guy i really appreciate it.
And if you dont mind me asking, what ROM are u using or had best experience with?
Click to expand...
Click to collapse
I Am using flyROM v3 here. But I suggest not to go with it as it lags and have random reboots.
I suggest use jaggy ROM by jaggy/danceoff.
If you've rooted your phone using jaggy's tutorial, you are already on "yannou's recovery". This recovery is perfect. No issues At all but you can change it to TWRP for touch support and some more features. But I suggest be on yannou's recovery.(because some are having problems with TWRP flashing sense 4 ROMs )
Hit "THANKS". If this helped.
---------- Post added at 05:25 AM ---------- Previous post was at 04:44 AM ----------
Have a look at this too.
You'll get some sense about working in recovery.
How to flash ROMs.
The method for flashing is almost the same for every ROM.
http://forum.xda-developers.com/showthread.php?t=2134836
Hit "THANKS". If this helped.
cool guys i did it. thx for all the help, i sucessfully Put jaggy ROM working. Now that i understand the process involved should i try and a better rom v4? what apps are cool for rooted phones?
Now after getting some sense about flashing. You can try other ROMs as well. Just wipe everything and flash.
Use titanium backup, root explorer, must have apps for rooted one.
Hit "THANKS". It encourages me.
Try
Cm 9,1 build11 man
or
cm9 Xperia fusion (Looks great)
This is best for u start with lag less Rome
please help me to flash the thunderzap kernel because i am doing this first time plz provide some simple steps to do the same...thnx..
It's already there:
http://forum.xda-developers.com/xperia-l/development/guide-installing-kernels-roms-xperia-l-t2548498
It's very simple guide and you can flash any kernel with it.
:good:
mvv1277 said:
It's already there:
http://forum.xda-developers.com/xperia-l/development/guide-installing-kernels-roms-xperia-l-t2548498
It's very simple guide and you can flash any kernel with it.
:good:
Click to expand...
Click to collapse
thanx buddy i done wid this now can u tell me how to flash custom roms
Flashing ROM is pretty much easy .
Take a backup of data first , as you'll lose data on internal memory.
If you have flashable zip then put zip file in SD card, reboot into TWRP or CWM, wipe cache and data.
flash zip file from SD card, and wipe dalvik cache. Done.
One thing don't say thanks on post, just press thanks button if i help you