Well, the more posts I see around, the less optimistic I am about seeing Asus fix the light bleed issues with the TF. For some reason, this is the only issue that is bothering me enough to consider returning it. If it wasn't for that, I would be a 95% satisfied customer.
Anyways, instead of waiting for answers, I figured I'd look for alternative methods of fixing the light bleed. I came across this post:
http://www.avsforum.com/avs-vb/showthread.php?t=1125227
Do you think it's possible. First we need to know what exactly causes this light bleed to be able to address it. It could be simpler than we thought.
Have you guys tried this? Any other recommendations?
Well bang away and let us know what happens.....
P.S. Go JETS.
Not sure if you could do this due to gorilla glass overlay
Sent from my captivate BLAZING on firefly 3.0
From everything I've seen on the internet, I just think light bleed is problem of the technology, its what happens when you have a screen that is using a side lit LED screen vs a back lit LED screen. (Ipad2, Transformer, and multitude of LED Tv's). Its the drawback of having the thinnest screen that everyone is wanting.
I'm not so sure, mine didn't have bleed at all until after I'd had it a couple of days, it just appeared. I'd handled it with kids gloves. I'm wondered if the light bleed may be caused by the case distorting a bit due to internal heat and or the fact that the housing isn't particularly strong?
UKseagull said:
I'm not so sure, mine didn't have bleed at all until after I'd had it a couple of days, it just appeared. I'd handled it with kids gloves. I'm wondered if the light bleed may be caused by the case distorting a bit due to internal heat and or the fact that the housing isn't particularly strong?
Click to expand...
Click to collapse
If you carefully put pressure on the bezel you will notice that the light bleed is changing. It seems to be a dynamic process so your observation doesn't mean you "abused" the tablet. It's just the problem with having a flexible material (plastic) as case.
That means that it must be related to some pressure on those spots where the light bleed is originating from. Perhaps there is a way to relieve it some?!
akarol said:
That means that it must be related to some pressure on those spots where the light bleed is originating from. Perhaps there is a way to relieve it some?!
Click to expand...
Click to collapse
I have no idea if the following is true but I think I remember the light bleed is caused by insufficient sealing. So if you morph the case it might lift the seal more. To find the right spots to fix this is very difficult IMHO (acupressure ).
Flex your TF or press on areas of the bezel and you will affect the light bleed.
There is no way to fix without disassembling it and having right tech to reassemble in a way that is perfectly even.
What causes light bleed?
Kinda a dumb question.
You see, an LCD panel needs this thing called a 'backlight', that shines through the liquid crystal layer. It's filtered by the liquid crystals to produce different colors.
Well, sometimes this backlight can 'bleed' around the edges of the LCD because it's not sealed up properly.
The 'fix' for this on a device like a Transformer would require disassembly and reassembly to better seal the edges of the screen.
The best solution any of us will be able to get will be to RMA our units and hope the replacements are a little better built. Personally, the bleed doesn't bother me much at all, so I'm not going to bother.
Could ASUS not ad a this metal support border to the screen, to counteract some of the flexibility in the chassis? EK follows the same principal with their waterblocks (allbeit for different reasons)
Maybe ASUS could fix it by adding some felt around the glass before assembling it, let it act as a washer.
how about some ducktape ... that fixes everything.
the light bleed is def due to to much pressure on the screen
FrayAdjacent said:
What causes light bleed?
Kinda a dumb question.
You see, an LCD panel needs this thing called a 'backlight', that shines through the liquid crystal layer. It's filtered by the liquid crystals to produce different colors.
Well, sometimes this backlight can 'bleed' around the edges of the LCD because it's not sealed up properly.
The 'fix' for this on a device like a Transformer would require disassembly and reassembly to better seal the edges of the screen.
The best solution any of us will be able to get will be to RMA our units and hope the replacements are a little better built. Personally, the bleed doesn't bother me much at all, so I'm not going to bother.
Click to expand...
Click to collapse
Really? Are you that obnoxious? You gave a pretty complex and technical answer to just a dumb question.
Related
I don't have a G2X yet, but I wonder if an owner who has some LCD bleed might want to try this out and report any results.
Screen bleed is a pretty common problem across LCD's. I don't think it's so much of a manufacturing defect as it is due to shifting during transport etc. All that has to happen is a corner of the screen gets too far or too close to the back light behind it. The screens tend to shift around a bit in their casing.
A common fix on regular LCD monitors is to massage the area of the bleed with medium or firm pressure. This can move the screen enough to reduce bleed.
Not sure if this would work on a glass-surface device like the G2X but it's probably worth a shot. Also try massaging with pressure *behind* the phone, not just on the front glass.
Ipad 2 seems to be having some bleed issues as well, and some owners report that slight twisting of the entire device corner-to-corner can re-seat the screen in the proper position and reduce bleed. Be careful with this one, but again, might be worth a shot to apply some twisting pressure.
Not recommending that anyone does this who isn't comfortable and ok with the possible consequences! But... as I live in Canada and want a G2X, it would be a lot easier to know that this sort of thing might fix the bleed than it would be to attempt returning it to the USA or an ebay reseller.
Please keep the "ARE YOU CRAZY?!" replies to a minimum... if you don't want to do it then simply don't do it.
dasbin said:
I don't have a G2X yet, but I wonder if an owner who has some LCD bleed might want to try this out and report any results.
Screen bleed is a pretty common problem across LCD's. I don't think it's so much of a manufacturing defect as it is due to shifting during transport etc. All that has to happen is a corner of the screen gets too far or too close to the back light behind it. The screens tend to shift around a bit in their casing.
A common fix on regular LCD monitors is to massage the area of the bleed with medium or firm pressure. This can move the screen enough to reduce bleed.
Not sure if this would work on a glass-surface device like the G2X but it's probably worth a shot. Also try massaging with pressure *behind* the phone, not just on the front glass.
Ipad 2 seems to be having some bleed issues as well, and some owners report that slight twisting of the entire device corner-to-corner can re-seat the screen in the proper position and reduce bleed. Be careful with this one, but again, might be worth a shot to apply some twisting pressure.
Not recommending that anyone does this who isn't comfortable and ok with the possible consequences! But... as I live in Canada and want a G2X, it would be a lot easier to know that this sort of thing might fix the bleed than it would be to attempt returning it to the USA or an ebay reseller.
Please keep the "ARE YOU CRAZY?!" replies to a minimum... if you don't want to do it then simply don't do it.
Click to expand...
Click to collapse
I just tried and I will say that the places that I had it originally did not get fixed or seem to be any dimmer than before which would have been nice... My bleeding is not that bad anyway...
However, the first time i twisted the phone a bit i noticed some more bleeding in the upper left of my phone (portrait directional) before i twisted it back to normal...
Good idea, but i would not recommend anything until we have some concrete evidence of it really working to fix ORIGINAL problems
lol this is not a fix and NEVER was a fix... you cant "massage" a LCD tv.... and a phone is no different gorilla glass or not it will NOT reset the screen.... good attempt at trying to find a solution but the bleeding isnt from the screen being out of place... its from poor manufacturing...
some bleeding is expected with LCD technology ... but not as bad as ive seen on some peoples ..... let alone on a 4" screen... but w/e if you have full brightness and are in a dark room then you must be blind.....
I wouldn't do it because you have to disassemble and it may void the warranty; in addition, you may break the LCD if you apply too much force.
If the bleeding/backlight leak is bad, just send it back and exchange.
nate420 said:
lol this is not a fix and NEVER was a fix... you cant "massage" a LCD tv....
Click to expand...
Click to collapse
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
dasbin said:
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
Click to expand...
Click to collapse
I've done the same, actually.
It made it a lot worse on mine. Good, though, as I plan to exchange it.
Profondo_Rosso said:
I've done the same, actually.
Click to expand...
Click to collapse
well i never herd of "massaging" a tv to fix it but i wouldnt do it to my 52" samsung cuz the manual states DO NOT PUSH FIRMLY ON SCREEN WHEN CLEANING so i dunno how it would work without taking it apart and "pushing the screen" back to the right spot...
let alone i got a 3 year warranty from best buy on it.. and if i crack it open AT ALL it voids so no thanks if anyone does this and it works on a phone i will be awed....
AND you shouldnt have to push the screen on ANYTHING to fix it... it should come correctly assembled in the first place....
just my .02 tho
I actually did fix my girlfriends bleeding with some massaging....Worked for me..
alnova1 said:
I actually did fix my girlfriends bleeding with some massaging....Worked for me..
Click to expand...
Click to collapse
what you did there. . .
I tried the massage but it doesn't work. I have very bad light bleeding from the top corners, and if I squeeze hard enough on top and bottom of the phone, it's a little better, but as I release my hands, everything goes back to normal, very bad looking darks colors. I'm exchanging it.
When my LCD screen started bleeding, I just put a bandaid on it
Asus bleeding
dasbin said:
Yes, you can. I fixed all bleed from my Acer 26" lcd by doing exactly this. I could see and feel the panel noticeably creaking back as I did it.
Click to expand...
Click to collapse
I have heard of this a lot. Massaging the LCD. I too am looking to fix a laptop screen. I heard before to massage the back of it, what side did you do? No one here who was successful mentioned if they did it to the front or back so I figured I'll do as you did? Thanks any help much appreciated!
My iPhone 5 is bleeding, pushed on it gently and it only made the black blotch spread. I don't recommend this
So, I was lucky enough to get my transformer today. Though I do love it, is anyone else having these problems?
-Light bleed
-Creaking/flex on the right side of the tablet, but not on the left
-Some dead pixels(not very noticeable, but I was able to catch around 3-4)
TheRealBoat said:
So, I was lucky enough to get my transformer today. Though I do love it, is anyone else having these problems?
-Light bleed
-Creaking/flex on the right side of the tablet, but not on the left
-Some dead pixels(not very noticeable, but I was able to catch around 3-4)
Click to expand...
Click to collapse
I have minor light bleeding but no creaking or flex.. How are you checking for dead pixel?
There are a few other threads about the flexing and the light bleed. I haven't experienced any dead pixels, but there is a specific paragraph on it in the warranty i.e how many and how close together in order to qualify for a warranty repair.
My Transformer is flexing at the top rim near the camera. I don't really think its a huge problem though. Just feels weird if you grip there.
TheRealBoat said:
So, I was lucky enough to get my transformer today. Though I do love it, is anyone else having these problems?
-Light bleed
-Creaking/flex on the right side of the tablet, but not on the left
-Some dead pixels(not very noticeable, but I was able to catch around 3-4)
Click to expand...
Click to collapse
Light bleed:yes,but not noticeable most time,and this issue seems to be common.
Creaking:sometimes,especially when holding TF by one hand,acceptable though.
No dead pixels,i've tested that using some pure color pictures.
On the 3rd day,i found a dust under the lens cover of rear camera...
iAndroidFan said:
Light bleed:yes,but not noticeable most time,and this issue seems to be common.
Creaking:sometimes,especially when holding TF by one hand,acceptable though.
No dead pixels,i've tested that using some pure color pictures.
On the 3rd day,i found a dust under the lens cover of rear camera...
Click to expand...
Click to collapse
Light bleed yes
No Creaking
No Dead pixels
I do have audio sync issues when recording video
Light bleed yes
No creaking
one stuck lit pixel
No dust
Light bleed and creaking on the top and bottom near the corners on both sides. No dust under screen or dead pixels
TheRealBoat said:
So, I was lucky enough to get my transformer today. Though I do love it, is anyone else having these problems?
-Light bleed
-Creaking/flex on the right side of the tablet, but not on the left
-Some dead pixels(not very noticeable, but I was able to catch around 3-4)
Click to expand...
Click to collapse
Sent from my Transformer TF101 using Tapatalk
some creaking, protip: plastic creaks.
Some flex on the back, nowhere else though.
No dead pixels, extremely minimal bleed.
light bleed
1 stuck pixel
Light bleed: yes
Creak: it flexes a little but not too bad
Dead pixels: yes. At least 2.
Screen skewed: yes. Off center skewed display.
Returned for a replacement. Waiting for stock again.
Sent from my Nexus S using XDA Premium App
my main concern is that on day one i had no bleed nor creaking. but 6 days later now i have both. what happens a month from now? the paint flakes?
i don't plan on keeping it after kal-el tablets come out, but dammit i'd like for it to last that long.
i just picked up the pre-order from best buy that i was going to cancel b/c i wanted to see if it had less issues. the new one actually has more bleed than my current but no creaking. i'm pretty sure it'll start creaking if i put more handling on it.
Makes me wanna believe they glued the rim on thats why its creaking when the glue fails to stick ;o
light bleed.
No, the pixels and light bleed arnt anything super major, but I dont know if I am ocd, but the the creaking seems to be enough to bother me. The ride side of the tablet is perfectly fine and very sturdy feeling, but I feel like the left is just not the same. Would this be okay to be sent in for warranty or exchanged? Should I just return it and wait?
Man... lots and lots of issues. I know the majority of people without issues, don't report. But the number of new cases keep expanding every day that goes by. I'm still waiting for my TF101, but I'm more and more skeptical.
frosty5689 said:
Makes me wanna believe they glued the rim on thats why its creaking when the glue fails to stick ;o
Click to expand...
Click to collapse
it has to be. it would be terrible if it's screws getting loose already. I can actually squeeze the front and back together on my left corner. the back is no longer flush with the bezel like the right side is. the right is only giving slight squeaks. hoping it doesn't get worse.
I hate to say this but this is typed out on my iPad. I really hate posting in this forum on my android tablets bc of the lag.
madsquabbles said:
it has to be. it would be terrible if it's screws getting loose already. I can actually squeeze the front and back together on my left corner. the back is no longer flush with the bezel like the right side is. the right is only giving slight squeaks. hoping it doesn't get worse.
I hate to say this but this is typed out on my iPad. I really hate posting in this forum on my android tablets bc of the lag.
Click to expand...
Click to collapse
The issues you are describing are serious build quality problems, the unit is defective and should be replaced.
TheRealBoat said:
So, I was lucky enough to get my transformer today. Though I do love it, is anyone else having these problems?
-Light bleed
-Creaking/flex on the right side of the tablet, but not on the left
-Some dead pixels(not very noticeable, but I was able to catch around 3-4)
Click to expand...
Click to collapse
Maybe you go to RC to solve these problem.
I think there's too much pressure being applied somewhere but I can't seem to find the spot. It's very light and doesn't really show in pictures, but to help give you guys an idea as to where it is, it's about mid to a quarter of the way up from the bottom of the phone. Any tips on how to alleviate this stress area?
Edit: I forgot to mention that touching around the area somewhat distorts the screen (ripple-like effect when you press down hard on an LCD/LED monitor). Even the lightest tap causes this.
Have you tried disassembling and re-assembling the phone? The distortion happens when you touch the front or rear? Does the glass/LCD look perfectly uniform in colour when the screen is off?
Distortion happens when touching the front and I have disassembled it. I'm starting to think it's a manufacturing imperfection. Seller on eBay claims it's OEM but I highly doubt it, considering the tight fit for the sim and back casing. Ah well. I think I'll just chalk this up to buyers remorse and move on.
Sent from my Nexus 5 using XDA-Developers mobile app
I never even noticed this before but I read a thread about it and than I looked at my phone and there is a barely visible light bleed above the light sensor like if it's just light barely peeking thru the glass it's not on the display. It's where the top bezel above the front camera meets the frame. Is this something I should b concerned about. It's only noticeable in the dark. Is it it defected or is it normal.
darksoul78644 said:
I never even noticed this before but I read a thread about it and than I looked at my phone and there is a barely visible light bleed above the light sensor like if it's just light barely peeking thru the glass it's not on the display. It's where the top bezel above the front camera meets the frame. Is this something I should b concerned about. It's only noticeable in the dark. Is it it defected or is it normal.
Click to expand...
Click to collapse
I have it too with my s8+, there is a little dot on the left side of the device where the plastic connects with the screen.
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Rob F1UK said:
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Click to expand...
Click to collapse
But will this affect water resistance or is this jus light peeking thru glass
darksoul78644 said:
But will this affect water resistance or is this jus light peeking thru glass
Click to expand...
Click to collapse
That is a very good question
darksoul78644 said:
But will this affect water resistance or is this jus light peeking thru glass
Click to expand...
Click to collapse
Depends on if its just light from mossing paint or an air gap.
The front glass is glass so its see through, and then there is a black flim/coating put on it. Then it is glue to the frame of the phone.
So if a piece of the black coating got messed up then your get light showing.
Now if its not glue down all the way and there is a gap then the water proof is gone.
There was a guy on xda that got his coarl blue s7e and one corner was missing some of the blue coating.
I have this light bleed over the iris scanner and the front camera. Then I searched where it comes from. I saw if I had a white screen (for example settings) and a high brightness a big light bleed in the front camera if you look from the top of the phone to the bottom of the camera. There I see light from the screen. It's not a problem for me, but have you guys this too? The question about water resistant is interesting in this case.
hope it's jus paint that is missing. That's fine with me. If it's not glued down right I'm gonna have to go exchange it. I'm gonna have to check it out more and see what it is.
I'm seeing something similar with my unit...but I think this is more of a light reflection off the interior of the case because of the space/void created by the two sensors in that area. I say that because the reflection occurs directly about the sensors and it moves around a bit as you change viewing angle. Am I crazy?
It is a reflection that gets passed on to the IR LED. Not a sensor.
Harmless, and seems to be on all units I looked at.
Rob F1UK said:
It's a production variance - you could argue it shouldn't be like that, but you'll never get a perfect phone due to variances in the tolerances during manufacturing... Mine has it too along the side (as did my silver S7 Edge before it).
Click to expand...
Click to collapse
How bad is your bleed? I JUST noticed today that mine has bleeding on the right edge? But it seems to go all the way down the side? Mostly visible when there is something bright on the screen? There is also a little on the bottom left side of the screen..
So, can we say that the light bleed above the front camera is normal then? I have it too.
Does anyone have screen bleed issues? I'm having a tough time identifying if there are any. Can someone post pictures for reference?
kakatorres1999 said:
Does anyone have screen bleed issues? I'm having a tough time identifying if there are any. Can someone post pictures for reference?
Click to expand...
Click to collapse
No I don't have any screen bleeding issue.
But if you aren't sure use an all blck wallpaper and if you see whitish tone near the edges your screen is bleeding.
BlurryXFace said:
No I don't have any screen bleeding issue.
But if you aren't sure use an all blck wallpaper and if you see whitish tone near the edges your screen is bleeding.
Click to expand...
Click to collapse
Perhaps a white wallpaper would show any particular screen bleeding than black wallpaper.
I dont need to post pictures, there is rather noticeable bleeding all around the display when using dark wallpaper when brightness is set to more rhan 50% (indoor usage). Especially on top and bottom edge of the display.
1375965485501144093271341 said:
I dont need to post pictures, there is rather noticeable bleeding all around the display when using dark wallpaper when brightness is set to more rhan 50% (indoor usage). Especially on top and bottom edge of the display.
Click to expand...
Click to collapse
You don't need to, sir/ma'am, but it'll help a lot if you did.
Sorry sir/ma'am, but i have nothing to take pictures with
1375965485501144093271341 said:
Sorry sir/ma'am, but i have nothing to take pictures with
Click to expand...
Click to collapse
That's unfortunate sir/ma'am but I guess it can't be helped.
You are quite correct sir/ma'am, it is unfortunate. I am, however, sorry that i could not be of any help to you regarding this matter.
1375965485501144093271341 said:
You are quite correct sir/ma'am, it is unfortunate. I am, however, sorry that i could not be of any help to you regarding this matter.
Click to expand...
Click to collapse
You need not apologize sir/ma'am, it's not your fault to begin with.
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
modit5 said:
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
Click to expand...
Click to collapse
These are some pictures of this i don't know correct word "screen bleed,Screenburn"
And it's definitely not a scratch !!!!
modit5 said:
These are some pictures of this i don't know correct word "screen bleed,Screenburn"
And it's definitely not a scratch !!!!
Click to expand...
Click to collapse
That's new to me and is quite strange to see. Doesn't look like screen bleed or burn though. Do get it checked at the service centre, and, if possible, enquire from them as to what caused it and keep us updated. Also, playing pubg shouldn't have such drastic effects on a device.
kakatorres1999 said:
That's new to me and is quite strange to see. Doesn't look like screen bleed or burn though. Do get it checked at the service centre, and, if possible, enquire from them as to what caused it and keep us updated. Also, playing pubg shouldn't have such drastic effects on a device.
Click to expand...
Click to collapse
Yeah it's really strange!
I don't know if i will get replacement or what coz i bought this 20 days ago.
Let's see what happen.
I've had a similar issue on my old phone. Either you have been cleaning your screen too much (so much that you have "cleaned" away a part of the oleophobic coating) or you have been playing games too much (sliding your finger along the same part of the screen and your sweat dissolved the oleophobic coating little by little). Try placing a couple of water drops on that part of the screen and also on different part of the screen (where there is no "smudge" ). You'll see a difference in the water drop shape. As far as i know, there is no way to restore factory applied oleophobic coating to its original condition.
1375965485501144093271341 said:
I've had a similar issue on my old phone. Either you have been cleaning your screen too much (so much that you have "cleaned" away a part of the oleophobic coating) or you have been playing games too much (sliding your finger along the same part of the screen and your sweat dissolved the oleophobic coating little by little). Try placing a couple of water drops on that part of the screen and also on different part of the screen (where there is no "smudge" ). You'll see a difference in the water drop shape. As far as i know, there is no way to restore factory applied oleophobic coating to its original condition.
Click to expand...
Click to collapse
I quite agree with you 2nd point of playing game that is pubg as I already mentioned and as you said "sliding your fingers along same part of the screen" Yes, this could be the reason as the joystick is on the left and it's always sliding there and as the device gets heated I get sweat on my thumb. But I have been playing pubg on my recent Note 5 Pro, I never got any sort of smudge. By the way it's not a cheap phone as it has best specs. But I did not expect this issue and yes I have cleaned with water but it's now permanent. I am little worried about the phone as I will go to the service center today to get replacement or whatever they will say. I will let you all know what will be the result.
Unfortunately, no oleophobic coating is perfect as it will wear off every device/surface over time. It depends on how one uses his/hers phone. I can only speculate that since RN5P and RN7P have different screen materials, the oleophobic coating will perform differently on each device. There are also other factors at play. I hope the service centre will give you a replacement unit, but this case scenario falls under "normal wear and tear" category which is, to my knowledge, not considered as a device defect. Anyway, there are some products out there that claim to restore/reapply the oleophobic coating of a screen, but i really doubt their efficacy. I guess you have nothing to loose if you wish to try some out, but even if they work, their efficacy will not be near as good as a factory applied coating. Good luck.
1375965485501144093271341 said:
Unfortunately, no oleophobic coating is perfect as it will wear off every device/surface over time. It depends on how one uses his/hers phone. I can only speculate that since RN5P and RN7P have different screen materials, the oleophobic coating will perform differently on each device. There are also other factors at play. I hope the service centre will give you a replacement unit, but this case scenario falls under "normal wear and tear" category which is, to my knowledge, not considered as a device defect. Anyway, there are some products out there that claim to restore/reapply the oleophobic coating of a screen, but i really doubt their efficacy. I guess you have nothing to loose if you wish to try some out, but even if they work, their efficacy will not be near as good as a factory applied coating. Good luck.
Click to expand...
Click to collapse
Unfortunately, service center only said that this is the first time that this problem we have faced and said you can only get the new lcd panel inspite of replacing the device.
So now I have to replace the lcd panel and have to wait for 7-10 days with submitting my phone to the service center! Without submitting the device they will not replace the lcd which is sad.
modit5 said:
I am facing an issue that is I am getting a vertical line in the above center of the screen which is only seen when i turn off the screen. It isn't a scratch but it feels like the display is burned or something. I don't know why it is happening. I have cleaned the device but that is not getting rid of it. I am thinking to go to service centre to get a replacement or something. Btw i play pubg alot, maybe it is the reason. But this should not a good sign of every RN7Pro customer !
Click to expand...
Click to collapse
Playing PUBG a lot doesn't cause screen bleeding, lol. You might have physically damaged the phone consciously or not knowingly.
AbhiAbhiBisht said:
Playing PUBG a lot doesn't cause screen bleeding, lol. You might have physically damaged the phone consciously or not knowingly.
Click to expand...
Click to collapse
I respect you answer!
But do you know that I have been using this device since 25 days, thereafter, my device had not felt even once.
Secondly, I use this device with cover that is provided in the mi store worth 349 which is very safe and good cover.
Fortunately, the device was all good when I opened the box and there was no spot, but I have noticed that spot after 15 to 20 days.
I thought that is is nothing just a smudge which can be cleared with a cloth but it doesn't get rid of it.
If I damaged the Device physically then a scratch must be there on the screen where there is a spot, so there is not even a single scratch. By the way if I have damaged it myself then I have to mention that thing in the thread, as I mentioned playing PUBG, because I had a doubt that when I play PUBG daily 3-4 hours the device is heated a lot above the center portion and the place where the spot is as same as the joystick of pubg which is used continuously ! Lastly I had no screen guard on the screen !
modit5 said:
I respect you answer!
But do you know that I have been using this device since 25 days, thereafter, my device had not felt even once.
Secondly, I use this device with cover that is provided in the mi store worth 349 which is very safe and good cover.
Fortunately, the device was all good when I opened the box and there was no spot, but I have noticed that spot after 15 to 20 days.
I thought that is is nothing just a smudge which can be cleared with a cloth but it doesn't get rid of it.
If I damaged the Device physically then a scratch must be there on the screen where there is a spot, so there is not even a single scratch. By the way if I have damaged it myself then I have to mention that thing in the thread, as I mentioned playing PUBG, because I had a doubt that when I play PUBG daily 3-4 hours the device is heated a lot above the center portion and the place where the spot is as same as the joystick of pubg which is used continuously ! Lastly I had no screen guard on the screen !
Click to expand...
Click to collapse
Can you provide some photos so we can help you better