I thought Splashstop came pre-installed on the TF? Got mine yesterday - so far so good. But when I try to find Splashtop it is nowhere to be seen in the apps?
Am I missing something?
Also I understand I need to install it on my PC I want to remotely control - where do I find the install - I assumed ASUS site but couldn't find it?
You have to access it from inside the "MyCloud" app and go through a bunch of menus. I have found no way to make a direct shortcut to it. It is quite annoying actually.
It's in MyNet. Called MyDesktop.
*Daedalus said:
It's in MyNet. Called MyDesktop.
Click to expand...
Click to collapse
No, it definitely in the MyCloud app
*Daedalus said:
It's in MyNet. Called MyDesktop.
Click to expand...
Click to collapse
I don't have either MyCloud or MyDesktop. MyNet I do have but it only shows media to be played and asks for DLNA connection.... My Net does not have MyDesktop or MyCloud in it.
RedMist said:
No, it definitely in the MyCloud app
Click to expand...
Click to collapse
Yeah, my bad. Didn't see your post when I posted. Don't have the TF yet, so I'm going off memory.
auspony said:
I don't have either MyCloud or MyDesktop. MyNet I do have but it only shows media to be played and asks for DLNA connection.... My Net does not have MyDesktop or MyCloud in it.
Click to expand...
Click to collapse
Presumably you still have the original firmware. There was an OTA which included MyCloud etc.
Regards,
Dave
That would make sense and leads me to my related question on my lack of OTA upgrade :-
http://forum.xda-developers.com/showthread.php?p=13909864#post13909864
auspony said:
That would make sense and leads me to my related question on my lack of OTA upgrade :-
http://forum.xda-developers.com/showthread.php?p=13909864#post13909864
Click to expand...
Click to collapse
you can always download the firmware upgrade from Asus website..
and yes..you'd better download it from your PC because you'll need to unzip it before put it onto your sd card
Thanks..... the Asus site says to download it and install it as per the intructions in the manual - checked the manual - no instructions there.
So Unzip the download and then put the files onto the SD card and from there on the TF do what?
The instructions on how to use the firmware file are in the SOP Manual which is the 3rd download on that page.
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/Update_Launcher_SOP_WW.pdf
Ok firmware updated and now I have MyCloud.
Where do I download the PC app from?
found it http://www.splashtop.com/remote/download?from=product
Nice of Asus to make it easy (NOT)
Related
Updated to v2.1 build 3323
Just got UVERSE last week and this works fine on my EVO..
whoo hoooo! my wife has it on her iphone and i have been so jealous! giving this a try now. thanks!
Thank you! Been waiting for this since ditching my iphone.
Thanks. Wish we could watch shows that we have recorded on our phones. Maybe i just havent figured out how to yet.
[?]
How doo you sign jn when it ask 4 your att member name?
Dozenboy0012 said:
How doo you sign jn when it ask 4 your att member name?
Click to expand...
Click to collapse
It should be your @att.net or @sbcglobal.net or whatever email address and password. I had to go and reset my password because I had no idea what it was.
MrDSL said:
Just got UVERSE last week and this works fine on my EVO..
Click to expand...
Click to collapse
Thanks. Got uverse coming in a couple of weeks. had to ditch TW. Anybody had problems with BT lately on TW?
so you need to have an account with ATT to use this? how are you guys using this on the EVO, I'm assuming you guys have ATT account/log in info?
please take it easy on me on my first post but how do I load this on my evo? I tried to hit the link from my phone and get the message saying the content is not supported. I have a stock evo with the current update
jblazea50 said:
so you need to have an account with ATT to use this? how are you guys using this on the EVO, I'm assuming you guys have ATT account/log in info?
Click to expand...
Click to collapse
Yeah you need to have AT&T UVERSE TV service. Then you would have a login.
nickpoz741 said:
please take it easy on me on my first post but how do I load this on my evo? I tried to hit the link from my phone and get the message saying the content is not supported. I have a stock evo with the current update
Click to expand...
Click to collapse
Download the file to your sdcard and use something like EStrongs file explorer to open the file.
Make sure you have Unknown sources checked in Settings/Applications/ section
You have to pay for it don't you
Sent from my PC36100 using XDA App
when I clicked on the file it says parse error, problem parsing the package
pitmanr2003 said:
You have to pay for it don't you
Click to expand...
Click to collapse
Pay for what? I mean yeah you pay for UVERSE TV service just like you would Dishnetwork or whatever. This app allows you to control your UVERSE DVR from your phone. Check out the channel guide and even download some shows to the phone. I think you need u300 or higher channel lineup though I dunno.
I just love being able to control my DVR from anywhere. I forget to record stuff all the time and miss out! This is awesome for me!
nickpoz741 said:
when I clicked on the file it says parse error, problem parsing the package
Click to expand...
Click to collapse
save the file to your sdcard then open it with estrong file explorer. dont just try and open it from here.
Anybody get the streaming to work. Fails for me with a network error.
I think I did download it to the card but it doesnt give me a chance on where to save it. I click on the program and it says on the top left sdcard.download and the att.uverse.apk is there and when I click on that is when I get the error message
nickpoz741 said:
I think I did download it to the card but it doesnt give me a chance on where to save it. I click on the program and it says on the top left sdcard.download and the att.uverse.apk is there and when I click on that is when I get the error message
Click to expand...
Click to collapse
launch the market and search for estrongs file explorer. download and install it..now launch estrong file explorer and find the .apk and click from there.
MrDSL said:
launch the market and search for estrongs file explorer. download and install it..now launch estrong file explorer and find the .apk and click from there.
Click to expand...
Click to collapse
I did that and im getting the error message inside the estrong app when clicking on the att apk
nickpoz741 said:
I did that and im getting the error message inside the estrong app when clicking on the att apk
Click to expand...
Click to collapse
if its giving you an error opening the file then download it from your home PC and then USB transfer it to your sdcard.
Hi guys,
I've been looking but couldn't find an easy answer. Is there a way to screen capture on the Sensation?
Thanks in advance!!!
I got this from the Incredible S forums:
1.Download Android SDK (zip one)
2.Download and Install Java JDK 6
3.Connect phone to PC in debugging mode
4.Where you have extracted Android SDK, go to the tools folder and open ddms.bat
5.Click on the device tab and click screen capture.
6.Capture and save
Any way to do it WITHOUT using a PC?
Toeeknee said:
Any way to do it WITHOUT using a PC?
Click to expand...
Click to collapse
Yes this is what I wanted to know. Isn't there a way to just do a capture and have it saved to your phone without a computer?
Here you go
https://market.android.com/details?....screenshotitfullnoroot&feature=search_result
nothing come for free!!
not without root if you don't want to be tethered to a pc
prateekgujral said:
Here you go
https://market.android.com/details?....screenshotitfullnoroot&feature=search_result
nothing come for free!!
Click to expand...
Click to collapse
i tried the free version of this app , which also stated NO ROOT and it didnt work !!
Dandandroid said:
i tried the free version of this app , which also stated NO ROOT and it didnt work !!
Click to expand...
Click to collapse
u could try this paid one.. maybe it works.. and if it doesnt.. u can always uninstall and claim refund (i think within a certian time frame)
So I go to the HTC Sensation support page and I see that under mechanical I see this issue (sorry I tried to post a link but I guess I'm too new for the forum to let me...something about avoiding spam...).
The second question is my question, is it not? But I can't seem to make is work. Anybody else try this?
*EDIT*
I went to the HTC website's forums and they said that this was some sort of misinformation. This feature currently does not exist even though it came from HTC themselves! Someone did state, though, that there is supposed to be an update soon that MIGHT have this feature...not sure if that also includes unlocking the boot loader!
Hello, I am a nubee to this forum and the Asus TF700T that I own. I selected the wrong firmware update(WW_epad-10.X.X.X_2012xxxx now pending an install on my system tray) needed US_epad-10.X.X.X_2012xxxx. Can anyone tell me how to eliminate the pending update. Thanks ... Tony
What do mean you selected the wrong firmware? Is this something you did for an ota update?
Sorry can you give more details please.
T-Con
sbdags said:
What do mean you selected the wrong firmware? Is this something you did for an ota update?
Sorry can you give more details please.
Click to expand...
Click to collapse
Yes, I went to the Asus site using my TF700. After I entered Android for the OS prompt, I selected download firmware. There were 10 files. Next - the screen wouldn't display the full list of available selection on my Tablets screen. I tried to move away with a swipe and the first selection(WW_epad-10.X.X.X_2012xxxx), the only selection displayed, began to download. Other than shutting off the WiFi I couldn't stop the download and it now sits in the system tray of my tablet waiting for me to installed it. From what I can tell the firmware update I should have selected was US_epad-10.X.X.X_2012xxxx. So, it is my thought that if I allow WW_epad-10.X.X.X_2012xxxx to install I may render the Tablet unusable. If screen shots help I am sure I can get them to you provided that I have effectively explained the situation. Since I am a newb I can't enter the Asus URL for your convenience. But, Thanks for the reply. I can use the help. Regards Tony (T-Con)
T-Con said:
Yes, I went to the Asus site using my TF700. After I entered Android for the OS prompt, I selected download firmware. There were 10 files. Next - the screen wouldn't display the full list of available selection on my Tablets screen. I tried to move away with a swipe and the first selection(WW_epad-10.X.X.X_2012xxxx), the only selection displayed, began to download. Other than shutting off the WiFi I couldn't stop the download and it now sits in the system tray of my tablet waiting for me to installed it. From what I can tell the firmware update I should have selected was US_epad-10.X.X.X_2012xxxx. So, it is my thought that if I allow WW_epad-10.X.X.X_2012xxxx to install I may render the Tablet unusable. If screen shots help I am sure I can get them to you provided that I have effectively explained the situation. Since I am a newb I can't enter the Asus URL for your convenience. But, Thanks for the reply. I can use the help. Regards Tony (T-Con)
Click to expand...
Click to collapse
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.
T-Con
sbdags said:
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.
Click to expand...
Click to collapse
Sorry ... no such file exists. The only things visible are folders
1. Bloomberg,
2. FQA,
3. Manual,
4 VibeDownload
Thanks again. Tony(T-Con)
T-Con said:
Sorry ... no such file exists. The only things visible are folders
1. Bloomberg,
2. FQA,
3. Manual,
4 VibeDownload
Thanks again. Tony(T-Con)
Click to expand...
Click to collapse
What file is on the root folder of your internal memory?
T-Con
sbdags said:
Go to the file manager or the downloads app and delete the downloaded file from sdcard/download. Then redownload the correct one. The notification is not a prompt to install but notification of a downloaded file.
Click to expand...
Click to collapse
One other thing to say. The exact info. on the screen says in bold "Asus System Firmware Update Service" then in smaller words "New system firmware available, press upgrade."
Thanks for the response. Tony(T-Con)
T-Con
sbdags said:
What file is on the root folder of your internal memory?
Click to expand...
Click to collapse
So, I select file manager. It takes me to > Internal Storage and shows a small folder icon with back arrow / sdcard /
I tap the back arrow folder and slide/scroll down to root folder.
Tap root folder and there is nothing there.
Thanks again. Tony(T-Con)
T-Con said:
One other thing to say. The exact info. on the screen says in bold "Asus System Firmware Update Service" then in smaller words "New system firmware available, press upgrade."
Thanks for the response. Tony(T-Con)
Click to expand...
Click to collapse
Ah it looks like you have downloaded the ota file manually. Not sure how to progress now. It's stored in the cache somewhere. Do a search on here about applying incremental ota updates manually and you will see some posts that instruct you how to reset the download.
T-Con
sbdags said:
Ah it looks like you have downloaded the ota file manually. Not sure how to progress now. It's stored in the cache somewhere. Do a search on here about applying incremental ota updates manually and you will see some posts that instruct you how to reset the download.
Click to expand...
Click to collapse
K thanks! I have also put in a req. to Asus for help. If I don't find an exact instructional resolution on this issue I will call Asus for help. Thanks again and best regards. Tony (nubee T-Con)
first. you should have postet it to the Q&A.
Second: if you've downloaded the file from the asus site, it should be a zip file. which you would find by opening the app drawer, open "downloads" there the file will be, you can delete it.
then the message won't show up again.
then make sure every app is installed, that was installed when you buoght the pad.
tehn go to "about phone" update and check for updates, maybe try several times. then an update should appear, install it. repeat until you've the latest version
if that doesnt work, check out the summary in android general in this forum, and look for update ota without losing root, there you should find the ota packages and how to manually apply them
geri
Download the program from: WindowsAndroid
Run as administrator and install the program.
Install Gapps:
1. Download gapps for ICS HERE.
2. Unzip the gapps.
3. Find the system folder that was unzipped, then go into the apps folder. Copy all of the apks
4. Go to C:\SocketeQ\windowsandroid_root\system\apps
5. Paste all of the apks in that directory.
6. Restart Windowsandroid
7. Enjoy gapps.
Note: You will now be able to add a Google account and get into Google Play but there is not really anything in the Play Store at this time.
Note #2: There have been reports that, this may not work on AMD processors. Intel seem to work just fine.
Very cool. Like you say, little you can do with it so far and very regular crashes even just using Play Store and built-in apps, but definitely one to keep an eye on.
The emulator won't even start.
I get an error in the cmd window that app_process(4776) terminated abnormally.
I got some screenshots if it helps.
ratatattata said:
The emulator won't even start.
I get an error in the cmd window that app_process(4776) terminated abnormally.
I got some screenshots if it helps.
Click to expand...
Click to collapse
Lets see the screenshots.
grilledbacon32 said:
Lets see the screenshots.
Click to expand...
Click to collapse
How to switch to tablet mode?
screenshot
I run windowsandroid that in WIN7,force stop.Below is a screenshot.Please help solve.ths
I have same issue force stop on win 7. Any advice how to fix?
mymolosser said:
I run windowsandroid that in WIN7,force stop.Below is a screenshot.Please help solve.ths
Click to expand...
Click to collapse
Are you running it as an administrator? If so try removing the program from Add or Remove programs. Then going to your C: drive and delete the file SocketeQ. Re install the program, once it is installed open WindowsAndroid first. Then close it and install the Gapps after running it one time. See if that helps anything.
grilledbacon32 said:
Lets see the screenshots.
Click to expand...
Click to collapse
Sorry for late reply, lots of school lately.
I get to bootanimation/loading screen, then the error comes.
Has anyone found out how to switch to Full-Screen or change resolution yet?
ratatattata said:
Sorry for late reply, lots of school lately.
I get to bootanimation/loading screen, then the error comes.
Click to expand...
Click to collapse
Did you try what I suggested on my previous post.
neodoughnut said:
Has anyone found out how to switch to Full-Screen or change resolution yet?
Click to expand...
Click to collapse
I don't believe so.
grilledbacon32 said:
Did you try what I suggested on my previous post.
Click to expand...
Click to collapse
I tried on the school laptop (intel processor) and it worked great. Still not working on desktop (AMD) though.
ratatattata said:
I tried on the school laptop (intel processor) and it worked great. Still not working on desktop (AMD) though.
Click to expand...
Click to collapse
Oh thank you for the information!
Issues encountered
Issues with WindowsAndroid encountered so far - post will be updated.
Play store - All apps incompatible, shows few apps
Voice search doesn't work
Developer options makes crash
Impossible to change layout and screen size
No Security settings
No unlock to camera (at least not with no webcam)
so what apps do run on this? or is a way to force an app to run, maybe changing the device id?
eortizr said:
so what apps do run on this? or is a way to force an app to run, maybe changing the device id?
Click to expand...
Click to collapse
As of right now you just have to try and see what you can get to work. This is a very early release and so there are a lot of things that need fixed. I just want to let people know that this is out there and that its something to look out for.
eortizr said:
so what apps do run on this? or is a way to force an app to run, maybe changing the device id?
Click to expand...
Click to collapse
Installed through the Play store, nothing. Even if you can find an app listed as compatible, they won't download. Manually installed, try it and see.
Sent from my HTC One X using Tapatalk 2
I'm having trouble loading the program... can anyone help me, please?
ttp://i.imgur.com/W42hrDK.png
ttp://i.imgur.com/r05LMyx.jpg
ttp://i.imgur.com/EtT5FyK.jpg
anyone tried to tinker with the build.prop to make it compatible with playstore?
I've never used USB Image Tool before, but it supposedly creates a full copy of a USB flash drive:
http://www.alexpage.de/usb-image-tool/
Here's a copy of my USB Recovery:
SurfaceRT8_0RecoveryEN-US.img (3.69 GB)
https://mega.co.nz/#!lgJAnKCR!c_1PuzGz7-2fiy3QGkjgZj4Y8IwbvP0ap8UN6CEZtrI
Have added this to my FTP for Surface RT recovery's..
Thank you for this. Finally got my surface rt back to being usable. :good:
Thank. Now I can clean up my RT recovery space without delicate flash drive to recovery drive.
The link is broken
alyssonmelo said:
The link is broken
Click to expand...
Click to collapse
Kind of vague there as to what link you're referring to. But I did check both links in my original post and both are still valid for me.
I can see it fine on my ftp...
Hello guys. I search a French recovery for my surface.
I have moved from my usb and she his formated.
Can you help me.
Nice Day .
Work Great on my surface !
Thank you so much !
Envoyé depuis mon Nexus 4 avec Tapatalk
Do you know if this image will work on a Canadian surface ? Us and Canada this is the same firmware, recovery ?
4square999 said:
Do you know if this image will work on a Canadian surface ? Us and Canada this is the same firmware, recovery ?
Click to expand...
Click to collapse
Its been confirmed that images seem to work on all devices. Only thing to watch out for is what language is the image in, in this case US-English. Your device will install any language fine, its just a case of you do want russian instead for instance, or the big one earlier on is that there was only a british english image at first which if you were an american user would have a few things spelt incorrectly.
Have a poke around in trig0rs thread and towards the end there are a few languages, I assume you will just want this image anyway.
Got en-GB and en-US recovery images on my FTP...
Thanks for the Surface image OP.
Question: Will this allow me to install the OS from a flash drive?
Thanks again.
JustinOkay said:
Thanks for the Surface image OP.
Question: Will this allow me to install the OS from a flash drive?
Thanks again.
Click to expand...
Click to collapse
If I understand the question, yes, you can use it to install regardless of what is on the drive. It could be blank and it should still work.
Sent from my HTC One using xda premium
is there a detailed step-to-step tutorial on how to restore back to 8.0 with a usb recovery (e.g. this one) ?
chp said:
I've never used USB Image Tool before, but it supposedly creates a full copy of a USB flash drive:
http://www.alexpage.de/usb-image-tool/
Here's a copy of my USB Recovery:
SurfaceRT8_0RecoveryEN-US.img (3.69 GB)
https://mega.co.nz/#!lgJAnKCR!c_1PuzGz7-2fiy3QGkjgZj4Y8IwbvP0ap8UN6CEZtrI
Click to expand...
Click to collapse
The mega.co.nz link doesn't seem to be working, it just hangs. Do you have this uploaded anywhere else by any chance?
Schuby said:
The mega.co.nz link doesn't seem to be working, it just hangs. Do you have this uploaded anywhere else by any chance?
Click to expand...
Click to collapse
Just checked the link myself and it appears to still be working.
Trig0r says he has a copy of it on a ftp site, but I don't have the ftp site information.
unbenannt said:
is there a detailed step-to-step tutorial on how to restore back to 8.0 with a usb recovery (e.g. this one) ?
Click to expand...
Click to collapse
I think there are a number of tutorials online.
After you have booted from the USB Recovery Drive and when you get to the screen asking what to recover, don't be fooled by the "Windows 8.1" that it shows. That is the drive you want to overwrite.
chp said:
Just checked the link myself and it appears to still be working.
Trig0r says he has a copy of it on a ftp site, but I don't have the ftp site information.
Click to expand...
Click to collapse
Weird, I'm not sure why it doesn't work.
What browser are you using? Mega doesn't work with some browsers due to the encryption.
Sent from my HTC One using xda premium