Related
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
How do I get to the debug screen? *#*#4636#*#* gives me WCMDA/GSM under phone info
Sent from my SGH-T959V using XDA App
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
Curious about this as well. Currently using a vibrant on at&t...
Sent from my SGH-T959 using Tapatalk
stealthj said:
I know the original vibrant was a pentaband phone, supporting AT&T's 850/1900 networks as well as t-mobiles 3g networks....
Can anyone confirm the 3g bands on the new Vibrant 4g?
Will there be fast 3g 21mbps for 850/1900 on the modem chip also? ( or 4g whatever you want to call it, in my book its just faster 3g..)
someone enter the debug screen and check which bands are available...
cheers!
Click to expand...
Click to collapse
HSPA+ 21 only works with T-mobile, AT&T doesn't use an AWS band, in this case is 1700/2100Mhz.
Someone may have been able to 'trick' the vibrant into using a basic UMTS band on AT&T, but I never heard of it, let alone heard that the Vibrant supported AT&T 3G. The Vibrant has GSM.support for them (2G), I haven't seen anything else.
Where's the supporting documents that people have been getting At&t 3G with a T-Mobile Vibrant?
Sent from my HTC Vision using XDA App
TheMan42 said:
HSPA+ 21 only works with T-mobile, AT&T doesn't use an AWS band, in this case is 1700/2100Mhz.
Someone may have been able to 'trick' the vibrant into using a basic UMTS band on AT&T, but I never heard of it, let alone heard that the Vibrant supported AT&T 3G. The Vibrant has GSM.support for them (2G), I haven't seen anything else.
Where's the supporting documents that people have been getting At&t 3G with a T-Mobile Vibrant?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Trust me.... I'm using a vibrant on at&t with 3g. It does support the wcdma 1900 band. There is alot of evidence of this...heck engadget made a post about this... google it!
Edit: What I was trying to ask is if the galaxy s 4g supports the 1900 wcdma that the original vibrant supported....
Sent from my SGH-T959 using Tapatalk
Not sure how I could check unless i unlocked it..
Sent from my SGH-T959V using Tapatalk
princedwi said:
Not sure how I could check unless i unlocked it..
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
That would work....hopefully the galaxy s 4g can be unlocked the same way the previous galaxy s phones could.
In my research I have found that 4G is not backwards compatable with 3G. Someware I read that companys are putting 3G and 4G chips on the new 4G phones to bridge the gap between the 3G chip ability to handle voice and the 4G chip being able to handle data. I can't say for sure if SGS4G has both chips. It's a know issue that the 3G SGS misses calls when connected to a laptop because It does not handle data well in combination with voice. That's why I upgraded to the 4G. I don't think Its going to make a lot of difference until TM gets their HW in place with a backbone that can support it.
Samsung Galaxy S 4G 1900 MHz WCDMA
I bought my Samsung Galaxy S 4G at a T-Mobile store in San Francisco. I subsequently upgraded it to the latest firmware provided by T-Mobile using Samsung Kies.
I usually use WCDMA only mode because GSM causes awful buzzing sound when I use it in my car (I have a FM transmitter connected to my phone).
Anyways, I was curious to see if I'd see AT&T, so I searched for network (still under WCDMA Only mode), and it found both AT&T and T-Mobile.
I pressed *#197328640# in the dialer, and then went to the debug screen/band selection to look at available bands, and it actually does have 1900 WCDMA.
It shows
GSM 850, 900, 1800, 1900, WCDMA 2100 (FDD I), WCDMA 1700 (FDD IV), WCDMA 1900(FDD II).
I don't know if AT&T SIM would work since my phone is locked but I can report back once I get it unlocked.
EDIT: Reading an old post of mine, I realized that my memory played a bad trick on me. My tests DID work on 1900 WCDMA and DID NOT work on 850 WCDMA, just opposite to what I wrote earlier in this post. --sorry
fm219 said:
...Anyways, I was curious to see if I'd see AT&T, so I searched for network (still under WCDMA Only mode), and it found both AT&T and T-Mobile.
I pressed *#197328640# in the dialer, and then went to the debug screen/band selection to look at available bands, and it actually does have 1900 WCDMA.
It shows
GSM 850, 900, 1800, 1900, WCDMA 2100 (FDD I), WCDMA 1700 (FDD IV), WCDMA 1900(FDD II).
I don't know if AT&T SIM would work since my phone is locked but I can report back once I get it unlocked.
Click to expand...
Click to collapse
I don't think it would work. For reference, here is a side by side band comparison between my Vibrant (tested 3G on AT&T) and my coworker's SGS 4G (locked, untested).
The essential band here is the 850 1900 WCDMA, but the "overflow" 850 WCDMA is missing and I couldn't make it work anyways (I'm in Houston, maybe it is not switched on here).
My understanding is that AT&T usually uses 1900MHz for 3G, and in certain cities where they don't have enough bandwidth in 1900 MHz like NYC and SF, they use 850MHz.. so you could still get by with only 1900 MHz, no?
EDIT: Reading my old post, my memory played a bad trick on me. My test DID work on 1900 and DID NOT work on 850, just opposite to what I wrote earlier on this post.
fm219 said:
My understanding is that AT&T usually uses 1900MHz for 3G, and in certain cities where they don't have enough bandwidth in 1900 MHz like NYC and SF, they use 850MHz.. so you could still get by with only 1900 MHz, no?
Click to expand...
Click to collapse
Yep, thats what I have heard as well. Now one thing of note. When I tested my Vibe, it only worked on the 850 1900 WCDMA band. Could not make it work on the 850 no matter how hard I tried. I'm in Houston for that matter and maybe this 850 WCDMA is not enabled here.
This was my test: http://forum.xda-developers.com/showpost.php?p=9958501&postcount=14
fosormic said:
EDIT: Reading an old post of mine, I realized that my memory played a bad trick on me. My tests DID work on 1900 WCDMA and DID NOT work on 850 WCDMA, just opposite to what I wrote earlier in this post. --sorry
I don't think it would work. For reference, here is a side by side band comparison between my Vibrant (tested 3G on AT&T) and my coworker's SGS 4G (locked, untested).
The essential band here is the 850 1900 WCDMA, but the "overflow" 850 WCDMA is missing and I couldn't make it work anyways (I'm in Houston, maybe it is not switched on here).
Click to expand...
Click to collapse
I'm currently unlocked on AT&T and i'm on 3G. I ALWAYS have an issue with upload speeds, but otherwise download speeds are just fine.
I attached four photos, of the available bands with my CURRENT galaxy S 4G unlocked on AT&T.
Also, a speed test I ran. That download speed is WAY higher than average because it was taken when the network was under the lightest usage possible, late at night.
Oh wow, over 5Mbps download on AT&T?
Are you on AT&T's 4G (HSPA+) or 3G?
I'm supposedly on T-Mobile 4G (my phone shows 4G when I download/upload), but I don't ever get 5Mbps. I get usually something around 2~3Mbps down and 1Mbps upload. I'm in the Bay Area.
I went into phone debug page, and one of the screens says HSDPA[0], HSUPA[0]. It also says network status: HSDPA (sorry I don't have the exact info on me right now).
Am I really just on HSDPA, not HSPA+? Is there a definite way to find out what my phone is using? Thank you.
fm219 said:
Oh wow, over 5Mbps download on AT&T?
Are you on AT&T's 4G (HSPA+) or 3G?
I'm supposedly on T-Mobile 4G (my phone shows 4G when I download/upload), but I don't ever get 5Mbps. I get usually something around 2~3Mbps down and 1Mbps upload. I'm in the Bay Area.
I went into phone debug page, and one of the screens says HSDPA[0], HSUPA[0]. It also says network status: HSDPA (sorry I don't have the exact info on me right now).
Am I really just on HSDPA, not HSPA+? Is there a definite way to find out what my phone is using? Thank you.
Click to expand...
Click to collapse
Technically I'm on HSPA+, though this phone doesn't even cover all of the "necessary" bands.
Look, to edit what bands you're on go into the market and download SGS Tools.
Then, go into the first line (Secret Codes) and hit Band Selection.
I'm on AT&T so I'm not sure what bands you need, but you can manually select them in there.
To check the band you're on, go to GSM Status in the "Secret Codes" page again.
Sent from my SGH-T959V using XDA Premium App
Oh I know I'm on 1700/2100 MHz because that's the only frequency (AWS) that T-Mobile uses for WCDMA/UMTS/4G/3G.
I downloaded Phono, and it says Network Type is HSDPA. Shouldn't it say HSPA+? I'm just wondering if there's an easy way to tell if I'm really on 4G (aka HSPA+) as opposed to 3G.
I actually messed around with debug settings last night so I'm worried that I screwed it up....
Thank you!
fm219 said:
Oh I know I'm on 1700/2100 MHz because that's the only frequency (AWS) that T-Mobile uses for WCDMA/UMTS/4G/3G.
I downloaded Phono, and it says Network Type is HSDPA. Shouldn't it say HSPA+? I'm just wondering if there's an easy way to tell if I'm really on 4G (aka HSPA+) as opposed to 3G.
I actually messed around with debug settings last night so I'm worried that I screwed it up....
Thank you!
Click to expand...
Click to collapse
Which debug settings did you change?
And as for Phono (which I've never even heard of/used until now), my phone says HSDPA as well, which, quite frankly, makes no sense. I guess you can technically get speeds of around 5MBPS on HSDPA but it's not typical.
You should easily be able to tell whether you're on HSDPA or HSPA+ with the 4G/3G connectivity icon. in your status bar.
Now, I'm no expert, but hopefully that answers your question.
I played around with GCF settings. When I go into debug mode, there was something about choosing Rel.6 or Rel.5 or cancel settings.. And then also, if you do *#3214789#, you can enable/disable GCF Mode.. which I have no idea what it is about....
Thanks!
fm219 said:
I played around with GCF settings. When I go into debug mode, there was something about choosing Rel.6 or Rel.5 or cancel settings.. And then also, if you do *#3214789#, you can enable/disable GCF Mode.. which I have no idea what it is about....
Thanks!
Click to expand...
Click to collapse
Hmm...that's awfully strange.....
I can't find anything about it anywhere....
Try restoring using ODIN yet?
I mean, if the phone is that messed up since you messed with that setting.
I put my friends att sim in my unlocked sgs4g to test and the 3g sign came up by the bars as well as the att operator logo didn't really test out speeds but im guessing that the 3g sign wouldn't have came up unless it was really picking up that frequency.
Is it possible to ever get T-Mobile 4g service on an unlocked Samsung Infuse 4g? I've tried every T-mobile APN setting. Anyone have suggestions ?
Nope, not possible. And wrong section.
I dont know how many times this question has been asked and with the same answer. Search before creating a new thread.
There's also a thread to ask questions. Just saying.
Sent from my SAMSUNG-SGH-I997 using XDA App
Sorry, and thnaks dudes appreciate it
AT&T UTMS/HSPA/HSPA+ bands: 850MHz, and 1900MHz, only one required to work.
T-Mobile UTMS/HSPA/HSPA+ bands: 1700MHz, and 2100MHz, both required to work.
Bands that Samsung Infuse 4G has: 850MHz, 1900MHz, 2100MHz.
Bands needed for Samsung Infuse 4G to work on T-Mobile 3G/4G: 1700MHz.
Is the Samsung Infuse 4G compatible with T-Mobile 3G/4G: No.
Longcat14 said:
AT&T UTMS/HSPA/HSPA+ bands: 850MHz, and 1900MHz, only one required to work.
T-Mobile UTMS/HSPA/HSPA+ bands: 1700MHz, and 2100MHz, both required to work.
Bands that Samsung Infuse 4G has: 850MHz, 1900MHz, 2100MHz.
Bands needed for Samsung Infuse 4G to work on T-Mobile 3G/4G: 1700MHz.
Is the Samsung Infuse 4G compatible with T-Mobile 3G/4G: No.
Click to expand...
Click to collapse
Only 2 small additions....
1. Know your network.
2. www.gsmarena.com or a similar site. Find the specs and compare.
Edit: and if possible, a mod lock or move, preferably both.
bedwa said:
Only 2 small additions....
1. Know your network.
2. www.gsmarena.com or a similar site. Find the specs and compare.
Edit: and if possible, a mod lock or move, preferably both.
Click to expand...
Click to collapse
I do know my network (or at least I think I do haha)
And yeah, you can always do that.
wow you're an idiot.. this phone doesnt support tmobile 3g/4g bands..
xavenged said:
wow you're an idiot.. this phone doesnt support tmobile 3g/4g bands..
Click to expand...
Click to collapse
There's no need to be rude, he was just asking, if he knew, he wouldn't ask.
What about telmex 5G network?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
ameza001 said:
What about telmex 5G network?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
You should probably "tell" the "mex"ican that there is no "5g".
i also picked up an at&t samsung infuse 4g...and i am searching for the best possible updates for this phone...will post here if i find something nice
its not that crazy of a question nowadays with carrier branded phones being so close to one another. you can actually flash a tmobile radio onto a skyrocket and have 4g hspa-dc through tmobile. but even if the infuse hardware was capable of tmobile bands (which it probably isnt), theres no tmobile version of the infuse inwhich to pull a radio. so the answer atleast for now is no.
I went seeing gtg post, but then I saw the timestamp and now I'm
Sent from my Samsung Infuse
Unlocked AT&T Samsung infuse does in fact support 3g network
Sent from my SAMSUNG-SGH-I997 using XDA
busybeebusy said:
i also picked up an at&t samsung infuse 4g...and i am searching for the best possible updates for this phone...will post here if i find something nice
Click to expand...
Click to collapse
Are you joking? Necrobumping a thread with an off-topic post?
Have you ever used the internet before?
Sent from my SGH-I997 using xda premium
BU113T said:
Unlocked AT&T Samsung infuse does in fact support 3g network
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
But not 4G - different bands. (I think.)
Sent from my SGH-I997 using xda premium
it supports 2g not 3g. and since its only 4g hspa+, its the same bands as 3g.
I understand how to flash radios and roms, not so much of a noob. but maybe this is a noob question. I have brought a att locked phone, I unlocked it. I live in the dominican republic and i have a plan(contract) with the orange phone company here. I only get 2g speeds(edge) not even 3g because skyrocket uses the 850 mhz band and my phone company uses 900. I wanted to flash the i9100 radio/modem hopefully to be able to get 3g here. if someone have insight on my situation please let me know
I'm not really sure, but I am 100% positive you cannot flash any other radio except the skyrocket, t989, and note(be careful) radios, the skyrocket has different internals
Sent from my SAMSUNG-SGH-I727 using XDA
And the blaze 4g I believe.
Sent from my SAMSUNG-SGH-I727 using xda premium
thats why i asked, able to flash galaxys note radio wondering if the s2 i9100 could be flashed too. really need to get 3g speeds here and i love my skyrocket phone to much dont really want to sell it to buy another one
someone please help!
different internals, so no it just wouldnt work. the note they meant was the att note which also has an s3 not the international note which has an exynos like the i9100
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
im just wondering, why did u get a skyrocket to unlock instead of just getting the international unlocked sgs2 i9100?
Definitely do not flash an i9100 radio on the skyrocket.
You might want to try flashing a Rogers based rom and/or flashing the Rogers radio found here: http://forum.xda-developers.com/showthread.php?t=1384865
Most of the Skyrocket radios are RAT locked, meaning you can't change it by dialing *#2263#. The Rogers one should work for you I think (but someone please correct me if I'm wrong... )
I brought the phone on craigslist and i read about the power and beauty of the phone and i fell in love with it, didnt forsee this problem. thought the minute i unlocked it i would get the data speeds minus the lte. i was wrong
flash the blaze 4G radio, i swear that uses the 900 frequency, or any other t989 radio for that matter. Most of those are RAT unlocked as well. Don't stress too much, the skyrocket has a penta-band radio that would do any world/touring phone proud
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1700 / 1900 / 2100
Those are the frequencies that are used for the sblaze and the t989. seems like i have no luck because i need it 900 for 3g. guess 2g is going to eventually kill me one day. thanks everyone who contributed to my search for answers. I appreciate it'
20 dollars paypall to anyone who can help me find a working solution
30 dollars?
Change your service!
come ooon! Orange LIE about supously 3g service and the maximum speed in orange is less 1 mega :-O I did test in all Dominican Republic and I think you are waste your time with that! I have a Skyrocket in Claro and I have a Blackberry pre paid service and I have 4 to 5 megas of speed! that rreally good! my modem RUXUMA 7 and my rom is Embryo 6.4
Skyrocket radio
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1900 / 2100
4G Network LTE 700 MHz Class 17 / 1700 / 2100
Click to expand...
Click to collapse
http://www.gsmarena.com/samsung_galaxy_s_ii_skyrocket_i727-4303.php
hatelamez561 said:
I understand how to flash radios and roms, not so much of a noob. but maybe this is a noob question. I have brought a att locked phone, I unlocked it. I live in the dominican republic and i have a plan(contract) with the orange phone company here. I only get 2g speeds(edge) not even 3g because skyrocket uses the 850 mhz band and my phone company uses 900. I wanted to flash the i9100 radio/modem hopefully to be able to get 3g here. if someone have insight on my situation please let me know
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1507825
Try this tutorial and see how that works for u
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Ok well i know that it is possible to get T-Mo's "4g" HSPA+ on this device. However, i have not found a clear answer as to when t mobiles 46 lte launches, will an unlocked at&t i727 be able to work on this t-mobile 4g lte. I am stuck between whether i should buy the t989 or an unlocked i727 and use either one on t mobile and this may affect my decison.
Thanks.
I never heard before about "T Mobile LTE !!!" ... T mobile is using HSPA 42 in its best markets ... If you're in a good coverage area from T mobile or you only want to use it , I would say just buy the T mobile S2 and be done with it ... At&t SR even if unlocked and T mobile radio installed in it would not have the full speed for T mobile or aka 4G (may get 3 or 4 mbps DL max) ........
This thread is relevant to my interests. T-mobile LTE will be Band 4, so does that mean the i727 won't work? Or does it have that band and they just aren't advertised? ATT does have some Band 4 holdings, so it's reasonable that they would want the i727 to work on LTE in those areas too.
If you get into Service Mode (*#2263#) and look at LTE bands, it's shown there. Don't know if it means that the phone is able to work with it, but might be.
mahanddeem said:
I never heard before about "T Mobile LTE !!!" ... T mobile is using HSPA 42 in its best markets ... If you're in a good coverage area from T mobile or you only want to use it , I would say just buy the T mobile S2 and be done with it ... At&t SR even if unlocked and T mobile radio installed in it would not have the full speed for T mobile or aka 4G (may get 3 or 4 mbps DL max) ........
Click to expand...
Click to collapse
I know these arent lte speeds but after I switched from my junk Mytouch Q to this and flashed Tmobile radios, for my area this isnt bad
Jack_R1 said:
If you get into Service Mode (*#2263#) and look at LTE bands, it's shown there. Don't know if it means that the phone is able to work with it, but might be.
Click to expand...
Click to collapse
FYI - This only works on Touchwiz ROMs.
if and when tmobile launches lte a t989 won't be able to use it anyway, no lte radio, the fastest that phone will ever achieve is h+ (fake 4g) speeds.
an unlocked skyrocket will allow lte usage, on bands 700 and 1700, so with the correct radio (i757m modem from bell) u SHOULD be able to access it
(edited to reflect correct info)
jssingh said:
FYI - This only works on Touchwiz ROMs.
Click to expand...
Click to collapse
It doesn't matter in this thread, since it's for reference only. If he won't be able to try it himself because he's not using TouchWiz - no biggie. But thanks for reminding me.
icenight89 said:
if and when tmobile launches lte a t989 won't be able to use it anyway, no lte radio, the fastest that phone will ever achieve is h+ (fake 4g) speeds.
an unlocked skyrocket MAY allow lte usage, depending on the lte band they use. It'll probably be 1700 AWS though, which is an lte band I don't believe the skyrocket supports, only 700.
So basically, neither. But if ur a gambling man, at least with the skyrocket u stand a chance
Click to expand...
Click to collapse
I thought the reason AT&T included the 1700 AWS band was b/c they were planning on turning that spectrum into LTE if the acquisition was successful. If so, wouldn't that mean that the 1700 band on the Skyrocket would support LTE Band 4?
icenight89 said:
if and when tmobile launches lte a t989 won't be able to use it anyway, no lte radio, the fastest that phone will ever achieve is h+ (fake 4g) speeds.
an unlocked skyrocket MAY allow lte usage, depending on the lte band they use. It'll probably be 1700 AWS though, which is an lte band I don't believe the skyrocket supports, only 700.
So basically, neither. But if ur a gambling man, at least with the skyrocket u stand a chance
Click to expand...
Click to collapse
according to this http://en.wikipedia.org/wiki/List_of_AWS_devices and this http://www.phonescoop.com/phones/phone.php?p=3364 skyrocket supports 1700
vincom said:
according to this http://en.wikipedia.org/wiki/List_of_AWS_devices and this http://www.phonescoop.com/phones/phone.php?p=3364 skyrocket supports 1700
Click to expand...
Click to collapse
was under the impression 1700 for skyrocket was only for hspa, read it somewhere, I stand corrected
Just saw this very recently:
http://forum.xda-developers.com/showthread.php?t=2119406
If I'm not mistaken, the Note has the exact same radio setup as the Skyrocket (AWS and 700Mhz LTE). So, it's looking promising for our phones to work on LTE, too.
Just wanted to bump this to see if anyone got the unlocked i727 to successfully lock onto the T-mobile LTE network. I believe I read somewhere that someone had done it successfully but wanted to confirm since T-mobile has refarmed most areas by this time.
ne0tekk1 said:
Just wanted to bump this to see if anyone got the unlocked i727 to successfully lock onto the T-mobile LTE network. I believe I read somewhere that someone had done it successfully but wanted to confirm since T-mobile has refarmed most areas by this time.
Click to expand...
Click to collapse
Did you search first? There is an active discussion going on right now in this same forum.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Here's my skyrocket on T-Mobile LTE
mahanddeem said:
Here's my skyrocket on T-Mobile LTE
Click to expand...
Click to collapse
Which Radio/Rom are you using?
Stock UCMC1 JB deodexed
I757m JB radio
mahanddeem said:
I never heard before about "T Mobile LTE !!!" ... T mobile is using HSPA 42 in its best markets ... If you're in a good coverage area from T mobile or you only want to use it , I would say just buy the T mobile S2 and be done with it ... At&t SR even if unlocked and T mobile radio installed in it would not have the full speed for T mobile or aka 4G (may get 3 or 4 mbps DL max) ........
Click to expand...
Click to collapse
Not true. I did it ... get 12 mpbs DL regularly on 4G. You'll need to try different radios but it's very possible.
Aimless Rambler said:
Not true. I did it ... get 12 mpbs DL regularly on 4G. You'll need to try different radios but it's very possible.
Click to expand...
Click to collapse
Yes..I'm sorry...I didn't know that at the time I replied..They have LTE and ironically we skyrocket owners can access it and the T-Mobile s2 owners are left being lol...
To my understanding tmobile 3g runs on aws 1700/2100 while one x's lte has both 1700/2100 bands so whats the reason behind all this that doesn't let tmobiles 3g run on its lte bands...and sorry i know that there's other threads saying it doesn't work but i just wanted to know why
it probably needs to be configured, have you added the correct data needed. Plus does tmobile even have LTE bands? News to me... i know 3g but lte?
The LTE radio hardware is completely different than the 3G (UMTS/HSPA) hardware. They have nothing to do with each other. Having frequency compatibility on a certain band on 3G doesn't get you the same compatibility on LTE. Same goes for EDGE/2G. For instance having a phone with 1900 MHz compatibility on 2G will not allow you to get 3G signal on the 1900 MHz band.
---------- Post added at 10:45 AM ---------- Previous post was at 10:43 AM ----------
joshuadjohnson22 said:
it probably needs to be configured, have you added the correct data needed.
Click to expand...
Click to collapse
Nope, no amount of software or setting tinkering will make the LTE radio work on T-Mob's HSPA+ network.
redpoint73 said:
The LTE radio hardware is completely different than the 3G (UMTS/HSPA) hardware. They have nothing to do with each other. Having frequency compatibility on a certain band on 3G doesn't get you the same compatibility on LTE. Same goes for EDGE/2G. For instance having a phone with 1900 MHz compatibility on 2G will not allow you to get 3G signal on the 1900 MHz band.
---------- Post added at 10:45 AM ---------- Previous post was at 10:43 AM ----------
Nope, no amount of software or setting tinkering will make the LTE radio work on T-Mob's HSPA+ network.
Click to expand...
Click to collapse
I have H2O an alternative to AT&T. I was wondering do I have LTE? I do turn on the LTE button and it seems to turn on?
Sent from my HTC One XL using xda app-developers app
chuko303 said:
I have H2O an alternative to AT&T. I was wondering do I have LTE? I do turn on the LTE button and it seems to turn on?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
No MVNO's (pre-paid companies) carry LTE. Only HSPA+
Sent from my HTC One XL using xda premium