Anyone else yave this problem? On some stored numbers in my contacts when i click on the person it dials an m0111 befoe the regular number. But when i look at the contact before i press call the correct regular number is there. Its only when i hit call it tacks that on. The contacts are verizon numbers also. Ok the M is normal as it means mobile number that is being called. The last 1 in the 0111 is the start of the area code. Ex 1-201-52*-****. I called the verizon and they said it is trying to dial international for some reason....they want me to hard reset i said no im not doing that yet.
Related
Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
I ported my old Orange number onto my TMobile contract. All seems to have worked correctly, apart from the fact that my TP still displays the temporary TMobile number in Start/Settings/Phone. Is there any way I can change that?
I've spoken to TMobile CS, and they reckon it can't be changed, and all phones do that. I'm sure in the past when I've ported a number it's been displayed correctly (been a long time so I'm not 100%).
There is no such number on mine at Start/Settings/Phone. I use Vodafone. Where is this number?
It's the very first thing on the 'Phone' tab, right at the top. It says 'Phone - ' then my number in international format. It's not an editable field, just a label.
There is no way to change it as that number is hardcoded into the SIM, To be honest that is actually still your number, when people call your ported in number it is in a way call diverted to your true number, it is transparent process from the point of view of end users, but in the background that is what it is doing.
ice_coffee said:
There is no way to change it as that number is hardcoded into the SIM, To be honest that is actually still your number, when people call your ported in number it is in a way call diverted to your true number, it is transparent process from the point of view of end users, but in the background that is what it is doing.
Click to expand...
Click to collapse
I too thought that this was the case, but it IS possible to change the phone number displayed and here's how.
People->All People
Menu->SIM Manager
Menu->Tools->List of Own Numbers
Then Edit the top one which is your phone number.
AMoosa said:
I too thought that this was the case, but it IS possible to change the phone number displayed and here's how.
People->All People
Menu->SIM Manager
Menu->Tools->List of Own Numbers
Then Edit the top one which is your phone number.
Click to expand...
Click to collapse
Cool, I never realised
Cool but mine cannot be saved. When I close sim manager, it 's gone.
Hmm, I'll probably end up with the same situation from october 6, when I port my orange to Tmobile. The sim already provided, has a different number
I'll be *****ing about that in the Tmobile shop if I can't resolve that for sure....
AMoosa said:
I too thought that this was the case, but it IS possible to change the phone number displayed and here's how.
People->All People
Menu->SIM Manager
Menu->Tools->List of Own Numbers
Then Edit the top one which is your phone number.
Click to expand...
Click to collapse
Excellent. I needed to switch off/on, but it worked a treat.
I have a contract with my cellphone company that provides me besides normal cellphone service, unlimited calls to a group of people in my country, all people in that group are identified with an aditional short phone number, so we have two phone numbers in our SIM, the normal one and the short one.
Happens that we use the short number to call ourserlves in the group (we could also use the normal number, but that'd be charged in my invoice as a normal call), but the normal phone number is always shown in our phones as incoming number when receiving a call from the group or outside, and that's how it is saved in call log.
So, in my contacts list, each contact has the two numbers added (I've set the normal phone number as cell phone number, and the short number as work phone).
Now the problem, the way smartdialer in WinMo5 and later work is to show the last call (made/missed/received) of every contact, then contacts list (if contact not already shown before), and after receiving a call from the group in my case the normal number is shown, and there's no way to use the short number to reply, unless I take the long path and go to contacts list and choose the contact and number manually; usually I'm in a hurry and just forget and call the contact using smartdialing and happens that the normal number is dialed.
I had no problem using smardialing with WinMo2003 as there was an option to choose a default number when there were multiples numbers on a contact, so, no matter what number a contact used to call me, when using smartdialing the default number was always chosen, I see no equivalent in WinMo5 or later.
Now, is there a way to replicate that behavior from WinMo2003? (registry/patch/etc.), thanks for taking the time to read.
P.D. the same can be said when we have multiples numbers in a contact (work/home/etc.) and receive calls from some of them but just want to reply to just one of them.
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
So ive had my phone for 2 days
Everything works fine except that when a call comes in, it will only show the number. Once I answer it, THEN it will show me the name connected to that number.
To clarify, if i have 20 people in my contacts listed by name, if one of those people call me, say Bob, it will just show their number when they call. Only after I accept the call, will it show Bob along with the number. Obviously this is bad because I dont know my friends numbers, a just their name. Ive searched all thru-out the phone and cant find the option to turn this on. I just simply want that if somebody calls me, and their number is in my contacts, to simply display their NAME along with the number, BEFORE i choose to answer the call or not of course
Anybody have this issue?
Please dont say reset the phone, spent to days getting it to the way I want it to be....
sprint G flex 2 zv7 rooted