Related
It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
bump. i also need this. btw have you tried using a script to do it?
danboard said:
It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
Click to expand...
Click to collapse
Did you read this thread?
http://forum.xda-developers.com/showthread.php?t=698059
and especially did you install this driver?
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
I do have read the thread and I have installed that driver. While in recovery mode using GOT's or OpenRecovery I notice that under device manager it says my phone is listed as "Android Phone" and if my phone is on and I connect it to my computer with USB debugging it lists it as "ADB interface". I can't get the phone to appear under adb devices while in recovery mode.
USB-Debugging active? (Settings-->Development)
It is when the phone is on, but what I am trying to do is push a file to the phone while its "off" in recovery mode so the usb debugging is irrelevant or so i believe.
Yes, sorry, you are right.
As I can remember, I have had a similar problem a year ago...
Try to copy adb into another directory and use it from there. Sounds stupid, but helped me in the past.
Sent from my Milestone using XDA App
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
danboard said:
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
Click to expand...
Click to collapse
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
micdim said:
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
Click to expand...
Click to collapse
Seems OK now. I just reinstalled official SDK.
dl.google.com/android/installer_r08-windows.exe
I'm very new to Android development (my first app), so please bear with me.
I'm using Eclipse with the android SDK. Using the Android SDK and AVD Manager, I've installed the Usb Driver package, rev 3.
To this point, I've been using the emulators to debug and develop. Now I need to debug on my device (bought a ViewSonic GTablet). Somewhere in my searching for solutions to how to get this going, I found that I need to get the drivers correctly installed. Those instructions directed me to:
- Modify the android_winusb.inf file in the usb_driver folder
- Install USBDeview program
- Removed all drivers associated with Andriod and NVIDIA Tegra 2 (I think there were 3 or 4)
- Connect the GTablet with USB and follow new found hardware wizard. Direct it to modified .inf file
The problem is, the "Found New Hardware Wizard" does its thing automatically without user intervention. I end up with 1 NVIDIA Tegra 2 USB Device driver. I think I'm supposed to have another driver called something like "Android Composite ADB Interface".
I tried using the Add Hardware wizard to install this, but it always results in saying "This device cannot start. (Code 10)".
Sorry for this lengthy explanation...can anyone please help?
Hi,
I struggled getting adb working until today. There's info for getting adb working with Gtab here:
http://forum.xda-developers.com/showthread.php?t=827209
The key for me was adding the 3 lines to the .inf. Make sure you have USB debugging enabled on the tab.
Then, in Win Device Manager uninstall the devices under Android.
Then unplug the USB, then reboot Windows.
After Windows starts, plug in USB, then when wizard pops up, browse to the USB driver dir.
Jim
Thank you jimcpl for the reply.
It's still a no-go.
I have done all the steps lined out in the link you provided--and thought your reboot step may be the key to making it work, but that didn't do it.
When I plug the GTab back in, I do get a "found new hardware" popup message, but no wizard is appearing. The result is, the system is installing:
(With the help of USBDeview window)
Device Name: NVIDIA Harmony
Description: NVIDIA Tegra 2 USB Device
Device Type: Mass Storage --> This one I can use to transfer files
...
I see no other devices associated with the GTab
What device type should the "Android Composite ADB Interface" be?
Also...Maybe this is a silly question, but isn't it the miniUSB connection I should be plugging in to?
More info on the problem
I found that when attempting to install the adb driver, the system is not using the .inf file I'm pointing it to. It is using one titled "oem24.inf". I found this by looking in Start->All programs->Accessories->System Tools->System Information. Then under Software Environment/Signed Drivers there is the "Android ADB Interface" listed.
I can see the referenced oem24.inf file (and associated .pnf files) under C:\Window\inf folder
BTW. I'm on Windows XP Pro SP3
In here I see at least 3 .ini files that have the three lines that we're using to modify the android_windusb.inf file with.
So the question now becomes...
How do I get the installation (or driver update) to use the .inf file I point it to?
Another recent thread suggested that window's supplied drivers will have to be removed. Are these what he may be referring to? If so how do I do that?
PLEASE -- I need a response from someone that knows something about this!
Memory doesn’t serve me too well in windows xp but go to device manager, click on action, add legacy hardware, Install the hardware that I manually select or something close to that then, have disk and point to the directory where the inf is located and install it. Make sure you modded the inf from the post above and you should be good to go.
Thanks...but, not the solution
I really appreciate the suggestion littleoldme!
In XP, Device Manager/Action menu only has the "Help" link which lauches the Microsoft Management Console. Doing a search for "Legacy" in the console results in no hits.
So I'm still stuck
JRDev said:
I really appreciate the suggestion littleoldme!
In XP, Device Manager/Action menu only has the "Help" link which lauches the Microsoft Management Console. Doing a search for "Legacy" in the console results in no hits.
So I'm still stuck
Click to expand...
Click to collapse
I found your answer.. see URL below
tegradeveloper.nvidia.com/tegra/forum/after-installing-froyo-adb-cant-see-device
I want to thank all who responded with suggestions to this problem.
I've followed all advice given and carefully followed all directions given in suggested links.
Unfortunately, there seems to be some underlying condition on my pc that is preventing the successful installation of the necessary adb driver. No matter what I have done so far, Windows is choosing NOT to use the driver I point it to, and use what it wants instead. I don't even get the "New Hardware" wizard when following the directions. It installs automatically and I have to launch a separate "Install new Hardware" dialog.
Anyway...through persistence, I've been able so far to develop this first app without the debug connection to the device using the development emulators, then installing the signed .apk on the device for further testing (via the one USB mass storage connection I do get).
So, maybe one day I'll find the reason, but for now I'll be purging on to get the app ready to go.
Thanks again for all help received.
I just come across this thread. After insert the usb device, then you might might find the unknown device in device manager. unstall that unknown device. And then do a hardware scan again in device manager. After it find your device again, point back to your USB inf file. It might work this way.
One thing I forgot. Do not unplug your device between uninstall and hardware scanning.
AAAHHH! GTAB Eclipse ADB frustration!
Thanks for all the tips, everyone, but I've been trying for days to be able to connect my gtab to use as a device for installing/debugging my apps. I too am running Eclipse using the emulators to date.
I've tried the steps outlined in the link provided by jimcpl, as well as others that are slightly varied, but to no avail.
I am running Vista SP2. My Gtab has been rooted, running ClockworkMod, and TnTLite 2.2. I also updated the Google USB package, rev 4 via the SDK/AVD Manager after attempting to use the rev 3 usb package.
Should any of these be reason why I cannot connect my gtab to Eclipse via ADB?
I'm totally frustrated...If anyone has any other suggestions, please forward them on!
Thanks in advance.
rlapela said:
Thanks for all the tips, everyone, but I've been trying for days to be able to connect my gtab to use as a device for installing/debugging my apps. I too am running Eclipse using the emulators to date.
I've tried the steps outlined in the link provided by jimcpl, as well as others that are slightly varied, but to no avail.
I am running Vista SP2. My Gtab has been rooted, running ClockworkMod, and TnTLite 2.2. I also updated the Google USB package, rev 4 via the SDK/AVD Manager after attempting to use the rev 3 usb package.
Should any of these be reason why I cannot connect my gtab to Eclipse via ADB?
I'm totally frustrated...If anyone has any other suggestions, please forward them on!
Thanks in advance.
Click to expand...
Click to collapse
On the Gtab, is USB debugging enabled?
On the Windows machine, did you add the 3 lines for tetra?
Jim
jimcpl said:
On the Gtab, is USB debugging enabled?
On the Windows machine, did you add the 3 lines for tetra?
Jim
Click to expand...
Click to collapse
Thanks Jim...Yes, and yes. I finally got connected. Old drivers were conflicting, and even though I'd repeatedly uninstall them in Device Manager, the ADB USB drivers would load, but not start the device. I finally got USBDeview to uninstall them successfully after many attempts and reboots, plugged in my GTab, and finally installed correctly, and it works like a champ!
rlapela said:
Thanks Jim...Yes, and yes. I finally got connected. Old drivers were conflicting, and even though I'd repeatedly uninstall them in Device Manager, the ADB USB drivers would load, but not start the device. I finally got USBDeview to uninstall them successfully after many attempts and reboots, plugged in my GTab, and finally installed correctly, and it works like a champ!
Click to expand...
Click to collapse
Hi,
Ok, thanks. I'm glad it's working for you now.
FYI, I think that when you "uninstall" a device from Device Manager in Windows, it doesn't physically delete driver files, etc. from your hard drive. It just removes the references to the removed device drivers from the Windows configuration.
That's why if you reboot, or do a scan for devices again, and if Windows thinks that it detects the physical device, it'll try to use the same driver files, .inf, etc. In that case, you have to force the installation of the new/correct driver, by not letting Windows automatically find the drivers (because otherwise, Windows will find the same ones from before, the non-working ones).
It's kind of a pain sometimes ... I ran into the same thing when I tried to install the ADB USB drivers. I downloaded the USB driver files from Android dev website, but those are generic. They have stuff in the .inf for some phones/devices that Google has relationships with, but not the "proprietary" ones like for the Gtab. That's why you have to add the 3 lines, which match (I guess) the Gtab.
Jim
Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.
Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928
webplus said:
Hey man what you need to do is this.....I had the same problem with drivers. Once I figured that out things ran smooth.
PDAnet drivers
http://forum.xda-developers.com/showthread.php?p=9861928#post9861928
Click to expand...
Click to collapse
You're a scholar and a gentleman--and absolutely right.
Looks like the default drivers from Google are borked. Downloaded the ones from PdaNet and things went smooth like butter. Thanks for making my day!!
haha no problem took me 6 hours of trying everything to figure out what I was doing wrong. Glad everything worked. If not for these forums and some great minds on these boards many of us would still be sporting a locked phone......so KUDOS to them!
bluetrevian said:
Team XDA Developers,
It's been a long frustrating evening and I write to you in a desperate plea for help. First off--YOU ARE ALL GENIUSES. That being said let my scrubby noobermcnooberstein train of thought commence.
Found a lot of help from 'drexman8244' on the Nexus S 'fastboot help?' thread and although I've made it decently far... I've hit a wall that I cannot overcome.
First--the specs. Running Windows XP SP3 32-bit. The phone is a Samsung GT-i9020 (aka Nexus S).
Second--I've successfully installed the Java SDK, the Android SDK, downloaded USB drivers from Google, downloaded/installed a copy of ADB into the '/SDK/tools' directory, configured the PATH value in the Windows System Environment variables in Control Panel 'System', and basically set things up to rock and roll.
Third--I turn on my Nexus S, enable USB debugging, and attach the device to the workstation. The system detects the device and produces the following output (which appears to install the Android ADB driver and successfully establish a connection to Nexus S). Verified this step by entering 'adb devices' in a command prompt. Working great!
Fourth--In the command prompt I enter 'adb reboot bootloader'. The device reboots... but here's where things get strange. The device enters Fastboot (bootloader) mode and the Windows workstation request an additional 'Android 1.0' hardware device driver to continue. (I've searched far and wide and can't seem to find something that resembles this driver)
Fifth--Regardless of my efforts to direct the Hardware Installation Wizard to the 'C:\Program Files\Android\android-sdk-windows\google-usb_driver' location on my workstation... it just doesn't seem to accept that as a valid driver for the device in Fastboot (bootloader) mode. Blows my mind.
Sixth--??? What steps do you fellas think I should take next?! I've obviously tried uninstalling the device from the workstation, rebooting the Nexus S and the workstation, attempting to install the ADB driver before attaching the device and rebooting into Fastboot. Nothing I've tried seems to work.
Any input is especially appreciated and I hope that there's nothing left out. Warm regards--
The Kid
Edit: Posted an album on the Imgur account in case anyone wants to look at screenshots of the steps provided.
Click to expand...
Click to collapse
as far as the USB driver and such, dont point it directly at the USB-driver folder point it at the SDK folder and then click the box that searches the sub folders
The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.
jimmypopulous said:
The drivers from Google aren't borked. You install one driver - the "normal" Android USB interface - for when the phone is plugged in and fully booted, and another - the "Fastboot" interface - for when the phone is plugged in but in recovery. For the latter, you have to pick the driver manually and do a force install, as Windows won't recognize the device.
Both drivers are available in the usb-drivers directory in the Android SDK directory, provided you loaded the SDK manager and downloaded the USB drivers.
Click to expand...
Click to collapse
This is correct. Oddly, I had no problems searching with the driver with the wizard on my win7 x64 pc, but had to manually point it for the fastboot relevant driver on my laptop, running the same OS.
Basically, as jimmypopulous says, you need to manually select the usb driver when you're in fastboot, according to my experience.
I hear what folks are saying about the Google USB drivers working fine for most installs.
That being said... No matter how many times I manually provided the path to the Google Fastboot driver location the OS refused to accept them as valid. (Seems like there are others that experienced this problem from a quick glance at the forums.)
In either case it seems as though the alternative drivers resolved the problem and I appreciate all the feedback that was given!
The Kid
I had the same issue - my Nexus One always worked fine on my laptop but even after updating the SDK & drivers I couldn't get fastboot to work with my Nexus S.
ADB worked fine but my laptop didn't recognise my phone properly via fastboot.
After installing PDANet, fastboot works as well now - thanks very much for your help, my NS is now rooted!
Hi,
This is my first post so bear with me and let me know if I'm outta line in any way.
I'm trying to root my nexus s and I am running XP. I can get ADB devices to work but when it comes to fastboot my device is not recognised. I have been trying for a couple of days and still cannot get it to work! I have installed PDAnet and and tried force installing the drivers but I can' get them to install. When I click install driver from a list and browse to the drivers it says that the specified location does not have information about your hardware. Is there something I am doing wrong here? Is there another way I can force install the driver?
Also I am a MASSIVE NOOB so please try and be specific when giving me directions.
Thank you XDA Overlords!
Uninstall all references to the drivers. your phone should show up with a bang once done properly.
Then follow the excellent guides here to root your phone properly
Sent from my Nexus S
Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
;Nexus S
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_4E20&REV_0100
Click to expand...
Click to collapse
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
When you say uninstall all references what do you mean? Again, I am a massive noob. Do you mean uninstall the device with USBDeview from all the previous times I have tried installing it? I've tried that multiple times and still can't get it to work
matt2053 said:
Also make sure you have the phone connected and in fastboot mode when you install PDAnet.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?
lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
In fastboot the ns just comes up as unknown device with hardware id of USB\UNKNOWN.
I tried just entering that id into the .inf file but that didn't help.
Anyone got any other ideas?
Thank you for these ideas I'm not gonna give up yet!
thejug02 said:
When I try install PDAnet with the ns in fast boot mode the installer says please connect your phone to complete the installation. Is there another way to install it where this won't happen?
Click to expand...
Click to collapse
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App
matt2053 said:
Maybe the installer has changed since I did it.
Try running PDA install, put phone in fastboot, then plug in when prompted.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yea maybe it did change. When I run the installer it stops and requests that you connect the device and put it in debugging mode. When you connect the ns in fastboot it doesn't read it as the ns so just continues to ask you to connect the ns.
Thanks for the idea though! Keepem coming people!
I just uninstalled the drivers from my laptop and installed again using PDAnet method. It worked without a problem.
The only other thing I can think of is to boot phone and make sure USB Debugging is checked and try again.
Sent from my Nexus S using XDA App
lambda30 said:
Adding these 2 lines in the android_winusb.inf file from the google "usb_driver" folder helped me.
Detailed:
If your PC displays "Android 1.0" in Device Manager (when you try to connect the phone through fastboot), then go to Android 1.0, Properties, Details tab. Select Hardware ids.
USB\VID_18D1&PID_4E20&REV_0100 This part should be exactly the same with the one you add in "android_winusb.inf"
Click to expand...
Click to collapse
It helped me too! It must be added under the [Google.NTx86] box
Hey guys, I followed the guide, added the lines to the inf, even downloaded the other inf and coppied over it. I can not get ADB to recognize my gTablet. I even removed the mass storage driver that was associated with the tablet
I know my adb works with my mytouch slide.
Has anyone else not been able to connect adb to the gTablet?
I followed the guide exactly.
There are no errors in my device manager.
USB debugging mode is on.
I cant think of anything else to try.
Update driver
This is the steps I took, FYI I'm running Windows 7 on my computer.
Completed the the steps in the Guide (as you did). Then had to Go to Control Panel>Device Manager; and had to manually update the drivers. In Device Manager select the G Tablet>Driver>Update Driver and navigate to your usb_driver folder in your SDK.
ShreddinPB said:
Hey guys, I followed the guide, added the lines to the inf, even downloaded the other inf and coppied over it. I can not get ADB to recognize my gTablet. I even removed the mass storage driver that was associated with the tablet
I know my adb works with my mytouch slide.
Has anyone else not been able to connect adb to the gTablet?
I followed the guide exactly.
There are no errors in my device manager.
USB debugging mode is on.
I cant think of anything else to try.
Click to expand...
Click to collapse
Not sure what you are using ADB for however I have had issues with my PC retaining the driver for it as well. I use an app called ADBWireless that allows me to connect wirelessly and use ADB commands for a few simple things. It's a good workaround if your just pushing and pulling a few apps and such.
Emul8or said:
This is the steps I took, FYI I'm running Windows 7 on my computer.
Completed the the steps in the Guide (as you did). Then had to Go to Control Panel>Device Manager; and had to manually update the drivers. In Device Manager select the G Tablet>Driver>Update Driver and navigate to your usb_driver folder in your SDK.
Click to expand...
Click to collapse
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?
it2steve said:
Not sure what you are using ADB for however I have had issues with my PC retaining the driver for it as well. I use an app called ADBWireless that allows me to connect wirelessly and use ADB commands for a few simple things. It's a good workaround if your just pushing and pulling a few apps and such.
Click to expand...
Click to collapse
There is a fix posted for the slowdown issue after resume from sleep, and you ADB to fix it
ShreddinPB said:
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?
Click to expand...
Click to collapse
Here's what dev mgr looks like on XP...
Jim
ShreddinPB said:
Thats what I figured I would do. I am also in Windows 7 but X64. I go to the device manager and I dont have a gTablet listed anywhere that I can find, but like I said there are no exclamation points in the device manager.. no devices that are not working.
I tried to update the "Portable Devices>f:" that shows up when I plug in the tablet but it wont let me.
So in your device manager.. there is a top level listing for "gTablet"?
Click to expand...
Click to collapse
Is there anything under USB drivers at the bottom for android bridge, or something along those lines? If not does it list NVIDIA Harmony drives anywhere? If neither try unplugging and plugging in your device a few times to see what dissapears when you plug it in. Reply back and we can go from there.
davinci07 said:
Is there anything under USB drivers at the bottom for android bridge, or something along those lines? If not does it list NVIDIA Harmony drives anywhere? If neither try unplugging and plugging in your device a few times to see what dissapears when you plug it in. Reply back and we can go from there.
Click to expand...
Click to collapse
Found it.. it was under "Universal Serial Bus Controllers" and called "USB storage device" i believe.
I tried updating the driver with the andoid one, but it errored out and wouldnt load it. After that however, 2 new devices popped up.. both the Nvidia harmony drive, and another nvidia tegra one. The harmony drivers failed to load.. so I pointed at the directory in the SDK and bam it works!!
Thanks guys!
But also btw.. before I got this working, I did use ADBWireless to run the adb shell and run that camand mentioned in the main thread that is supposed to stop the slow downs.. and I think its working.
enjoy, can you point me to the post that you needed this for? Also, now that ADB works you can start making your own apps. With either Eclipse and Android SDK (more advance route, but there is alot of good books that could help you alot) or with app invnetor that just got released to the public.
This incorporates the ideas of http://forum.xda-developers.com/showthread.php?t=2144709, so if you want to see how this was resolved for the Nexus 4, check out that thread.
Okay. So you've flashed a spanking new 4.2.2 ROM and ADB no longer talks to your Sensation. What happened?
Well, the fact is that 4.2.2 is significantly more secure, in the good sense. It enforces RSA authentication via ADB. However, RSA authentication is supported only in recent versions of ADB.
What to do?
First, make sure you have the latest version of ADB on your PC.
On Windows you can quickly find out if you your version of ADB is up to date. Check your ".android" folder and see if it holds a file called "adbkey".
On any platform type "adb version" to verify that you have the latest version of ADB. Versions 1.0.31+ support RSA authentication.
-- So now, if you have ADB 1.0.31 or higher. You can skip directly to step 2, then.
-- If you do not have ADB 1.0.31 or higher, and you have the full Android SDK installed, open the SDK manager and update it. If you only have ADB and fastboot installed in a folder on your PC, overwrite files in the folder with those in the corresponding zip file attached (windows or linux -- sorry! I don't have Mac versions at this time). These come from version 16.01 of the android platform-tools package, if you are curious.
-- if you have never installed the SDK or ADB or fastboot, now is the time to do that. I recommend going to http://developer.android.com/sdk/index.html to get started.
[*]Enable USB debugging on your phone
USB debugging is now enabled by selecting Android Debugging in System Settings > Developer Options.
"I don't have the Developer Options items in System Settings!!"
In Android 4.2.x, you need to go to System Settings > About Phone and tap the Build Number item about 6 or 8 times, and Developer Options will reappear.
[*]Plug in the USB cable. Securely.
Dismiss the USB mass storage window.
"I connected the cable, but nothing happened!!"
Okay, chill. You won't get a response until ADB tries to connect to your Sensation. So go ahead and start ADB on your PC. Suggested command:
Code:
adb devices
"Now ADB started, but nothing's happening on my computer!!!"
Uh, didn't I just advise you to chill ? Take a look at your phone...
"What's this pop-up that just popped up??"
(See image below)
Congratulations, that is Android asking your permission to store an RSA key on your Sensation for ADB interaction with your PC.
Fearlessly accept it.
Hint: check the "Always allow from this computer" box to save time later on.
The RSA authentication key you just accepted will be stored on your phone in the file /data/misc/adb/adb_keys.
You are now good to go. Just 3 easy steps with a minimum of panic.
Questions? Problems? Ask away!
Many thanks to XDA member skipjacks for the idea for this post
Hi,
Nice! :good:
People should also not use USB 3.0 slots or USB hubs.
Try several slots if the front ones do not work.
Windows 7 & 8 drivers are HERE in case anyone needs them...
malybru said:
People should also not use USB 3.0 slots or USB hubs.
Click to expand...
Click to collapse
I understand about the hubs, but why not USB 3.0?
Skipjacks said:
I understand about the hubs, but why not USB 3.0?
Click to expand...
Click to collapse
Hi,
I have read a lot of instances of "Device not recognized" when using 3.0 slots.
I am not saying it will never work.
But ,if you use one,and it does not work,then,try it on a 2.0 slot.
Thanks for the post
few problems:
- I tried updating ADB with SDK manager. It kept saying something was accesing the installation folder. even after I closed explorer, virusscanner etc. I replaced the files with the zip attachement, but still a weird issue.
- another thing. Before I updated adb reported error: device offline. After update the issue persists. not using any hubs or USB 3.0. I think it's because I'm not using the stock cable that came with the phone.
onemanshow85 said:
Thanks for the post
few problems:
- I tried updating ADB with SDK manager. It kept saying something was accesing the installation folder. even after I closed explorer, virusscanner etc. I replaced the files with the zip attachement, but still a weird issue.
- another thing. Before I updated adb reported error: device offline. After update the issue persists. not using any hubs or USB 3.0. I think it's because I'm not using the stock cable that came with the phone.
Click to expand...
Click to collapse
Hi,
I think there is one solution that will address both issues. Before I mention it, let me ask: are you sure you enabled USB debugging on your Sensation? This is confirmed if, when you plug in the cable to your PC, you immediately get a USB debugging icon in the Notification Bar.
Glad we got that out of the way!
Unplug your device from the PC.
Anyhow, since you already have the SDK installed, the recommended way to update is to use the SDK Manager.
--in Windows, I think this is an executable in the tools sub-folder of your main android SDK folder. Double clock on it.
--in Linux, start up a terminal and type
Code:
android
if that doesn't do it, CD to the /tools directory in android-sdk-linux, or wherever you put the SDK, first. Then type "android".
The window that opens when you start SDK Manager should show that you need an update to (at least) platform-tools. Go ahead and do the update. You will have to accept some license(s) - accept it or them.
Once the install is complete, close SDK Manager.
Now plug your USB cable back in, and try out the "adb devices" command. It should work.
Suppose you still get "device not found", though. Try the following: again unplug.
Type the command:
Code:
adb kill-server
Now plug the phone back in, verify that you have USB debugging, and try "adb devices".
If no go, let me know what platform you are running, etc. I've heard it could be the cable, but I think that you just need to make sure it is plugged in securely.
BTW, the reason you probably won't have to do the adb kill-server step is that the SDK Manager kills running adb processes during the install.
Let me know how it goes!
Yrs,
dkephart
Sent from my HTC Sensation using xda premium
tnx. I was somewhat ehead of the steps you mentioned. problem was that SDK manager can't install anything cause it can't seem to kill any other adb proces. But I used a workaround for that so no problem there.
ADB does find my device, only it is stated as offline. I will have to try it again with the stock cable that came with the phone. Then I'll know if this is a software issue. Currently I'm using a complete random micro-USB cable wich I found on work laying around.
I'll let you know if stock cable is any difference. If so, it might be usefull info for ppl to know to always use stock cable while using ADB/Fastboot
onemanshow85 said:
tnx. I was somewhat ehead of the steps you mentioned. problem was that SDK manager can't install anything cause it can't seem to kill any other adb proces. But I used a workaround for that so no problem there.
ADB does find my device, only it is stated as offline. I will have to try it again with the stock cable that came with the phone. Then I'll know if this is a software issue. Currently I'm using a complete random micro-USB cable wich I found on work laying around.
I'll let you know if stock cable is any difference. If so, it might be usefull info for ppl to know to always use stock cable while using ADB/Fastboot
Click to expand...
Click to collapse
Yeah... my random selection doesn't have this problem. But I once seemed to have it with the official cable. You might want to try rebooting both the phone and the PC.
Sent from my HTC Sensation using xda premium
The stock cable did the trick. everything works fine with the stock cable.
So if ppl find any trouble using ADB with a cable other then stock, this might cause the problem.
onemanshow85 said:
The stock cable did the trick. everything works fine with the stock cable.
So if ppl find any trouble using ADB with a cable other then stock, this might cause the problem.
Click to expand...
Click to collapse
Great find...and extra points to anyone who determines why this might be the case...
Sent from my HTC Sensation using xda premium
dkephart said:
Great find...and extra points to anyone who determines why this might be the case...
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Some really cheap cables only have 2 wires in them and can only be used for charging. You need the other wires for data transfer.
But some companies only put the charging wires in to save money on the copper.
It must be a REALLY low quality cable though. I mean I get all my cables on Monoprice for like $1-$2 and they all work great for data.
Or, the cable does have all the internal wires and one is just broken inside.
Sent from my HTC Sensation using xda app-developers app
I've done everything in the thread, I can see my htc when I run the adb command but I don't get the pop-up on my phone. I tried the stock cable and different one but nothing. I'm on latest albinoman ROM. what should I do ?
P.S : I tried rebooting both the phone and pc but still the same problem.
nemovich said:
I've done everything in the thread, I can see my htc when I run the adb command but I don't get the pop-up on my phone. I tried the stock cable and different one but nothing. I'm on latest albinoman ROM. what should I do ?
P.S : I tried rebooting both the phone and pc but still the same problem.
Click to expand...
Click to collapse
You get your serial number and "device offline" from the adb devices command?
Sent from my HTC Sensation using xda premium
dkephart said:
You get your serial number and "device offline" from the adb devices command?
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
no just the serial number
nemovich said:
no just the serial number
Click to expand...
Click to collapse
I'm puzzled, then. What happens when you do "adb shell"?
And if that comes back with the shell prompt (a $), then what happens if you type "su"?
Sent from my HTC Sensation using xda premium
dkephart said:
I'm puzzled, then. What happens when you do "adb shell"?
And if that comes back with the shell prompt (a $), then what happens if you type "su"?
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
with adb shell I get $ and with su I get #.
nemovich said:
with adb shell I get $ and with su I get #.
Click to expand...
Click to collapse
Cool! Then you have adb working. To confirm, in the shell, "ls" should come back with a listing of the files on your device. If you do "cd sdcard" and "ls" you get the files on the SD card.
You're good to go.
Sent from my HTC Sensation using xda premium
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
---------- Post added at 05:07 PM ---------- Previous post was at 04:57 PM ----------
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
Sent from my HTC Sensation using xda premium
nemovich said:
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
Click to expand...
Click to collapse
There is still a possibility adb did not update, or that you have more than one copy of adb on your system. Here's another way. cd to the android-sdk- windows folder (you are running windows, right?) and type
Code:
android update sdk --no-ui
...now the SDK manager will run. It takes a while. When done, reboot your PC and plug in your Sensation. Go to the platform-tools subfolder of your SDK folder and run adb from there. You could type "./adb" to make sure. Check your device - the homescreen has to be unlocked - and you should see the pop-up.
I don't really know about Android Commander, so there is always a possibility that that app doesn't handler things right, but I think this will work.
Let me know how it goes...
Sent from my HTC Sensation using xda premium
dkephart said:
There is still a possibility adb did not update, or that you have more than one copy of adb on your system. Here's another way. cd to the android-sdk- windows folder (you are running windows, right?) and type
Code:
android update sdk --no-ui
...now the SDK manager will run. It takes a while. When done, reboot your PC and plug in your Sensation. Go to the platform-tools subfolder of your SDK folder and run adb from there. You could type "./adb" to make sure. Check your device - the homescreen has to be unlocked - and you should see the pop-up.
I don't really know about Android Commander, so there is always a possibility that that app doesn't handler things right, but I think this will work.
Let me know how it goes...
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
when I cd to the sdk folder ( C:\Users\Documents\adt-bundle-windows-x86-20130219), it gives me command not recognized. I can run sdk manager from the folder and everything is up to date.
I run adb from platform-tools and it gives me the same thing as before.
one thing though, I don't see the "adbkey" file in platform-tools but it is there in ".android" folder. so I run it from the later folder too but the still the same thing, no pop-up.
it's not just android commander, a lot of other apps give the same thing.