Related
Well again.... Im about to lose my minda because of this damn thing! Now I'm getting a fc every 5 sec... Process acore? My tab is essentially dead? Can't do anything author a fc, can't go into settings our anything... I want to smash this thing! I just got it working well and now this? Anyone know what that process is? I cam do anything with it now, cant load a new rom because I can't get into settings. Its just in an intimate loop of fc. The real disaster is im in idaho, where I got it as a gift, and I'm flying back to nc in the morning.. Can't take out back before I leave..
Anyone know anything about the fc?
Sent from my SAMSUNG-SGH-I897 using XDA App
Setting---appliction----Clear the contacts and ContactsProvider data .
I can't get into settings... It fc's every time I try to go into settings. Any other way to do it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I think I need to do a reset, but if I can't open settings I'm lost? Not sure how it happened, it just started doing it.
Sent from my SAMSUNG-SGH-I897 using XDA App
pqrs said:
I think I need to do a reset, but if I can't open settings I'm lost? Not sure how it happened, it just started doing it.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If you can get ClockWork to run on boot .You might need to wipe data and reinstall the rom..Not much you can do when it is constantly Fc'ing
Well I don't have cw on the tab, its still stock.. I'm hoping I can plug into a pc, download it and get root that way? Then possibly load a new rom... Otherwise I'm screwed.
Think that will work?
Sent from my SAMSUNG-SGH-I897 using XDA App
Maybe you should restore it back to factory settings...
http://forum.xda-developers.com/showthread.php?t=861950
That will bring it back to how it was out of the box, then start over.
If there are still issues then possible hardware problems?
Had this issue, even after NV flash. I was able to get CW (even with the fc) on and wipe, and partition the sd to 2gb. That seems to have cleaned it up.
This forum is the greatest on the entire internet!
Glad to hear you got it working. Imo, your issue is probably the worst thing about running stock - if you get these FC's, there's really no fix unless you take the risk of using a mod.
I believe it's the same reason why Staples pulled the devices - too many returns due to FC's OOTB.
Yes, it's too bad they did not include the "easy" button to reset to stock. Even with the upgrade, it may be enough to ultimately kill off the device. With all of the recovery images on my laptop now, I can put humpty dumpty back with ease. It's good for me, I plan to watch for returns. I could use a couple more of these.
I got cw installed and vegan, the table works like I'd expect now! This thing is awesome! Thanks for the help.
A resolution
I had this same issue happen to me on a new ROM not factory. I couldn't get into settings either to do the contact wipe. But Titanium was installed on it and I was able to wipe the contact data through there. Just an FYI if anyone else runs across the same problem.
Thanks to you Snyper....I just picked up my tab after placing it down for 10 mins and saw this error. Just a quick search in the thread and there is the answer. Man this forum rocks!!!
Just happened to me running vegan 3
clearing contact info worked like a champ!
thanks guys
I have the same issue. But, I don't have CW installed, Titanium won't load up. How can I manually get the clockword APK file on there to attempt to install it?
Any other ideas?
Gravislord said:
I have the same issue. But, I don't have CW installed, Titanium won't load up. How can I manually get the clockword APK file on there to attempt to install it?
Any other ideas?
Click to expand...
Click to collapse
Clockwork is not an apk. Read this
Post 1
http://forum.xda-developers.com/showthread.php?t=865245
Post 1
http://forum.xda-developers.com/showthread.php?t=892090
roebeet said:
Glad to hear you got it working. Imo, your issue is probably the worst thing about running stock - if you get these FC's, there's really no fix unless you take the risk of using a mod.
I believe it's the same reason why Staples pulled the devices - too many returns due to FC's OOTB.
Click to expand...
Click to collapse
Hi,
Having had this acore FC problem last night, I have a couple of questions:
1) In your post above, you seem to have thought that this only happens with stock TNT. But, in this thread, it seems like others that are not running stock TNT also encounter this problem. So, it this a potential problem with all ROMs, or just with stock TNT?
2) From reading through and other threads, one fix when it happens is to clear the Contacts and ContactsProvider data, either using Settings, if you can get to it, or using Titanium, if you have it. I'm assuming that what both of those steps do is to clear out the tables in SQLlite for the Contacts and ContactsProvider apps. Is that right? If it is, do you, or does anyone know the command lines that would do the same thing?
The reason for the latter question is that when I had the problem, I could still do adb shell. If there was an sqllite command I could have used to clear the problem, I definitely would have done that, instead of having to install CWM, re-partition, and re-flash stock 3452!
Thanks,
Jim
Okay so.. I have an answer to my problem.. this is a problem that i had encountered many times in forums while i was looking for my answer.. big thanks to diablo2224 for his help and a thanks goes out to Cranvis for actually replying at all..
Okay so the home button wasn't working at all and it would flash and basically do zero (im sure this fix would help any buttons if this was the case). In the end i didnt have much to lose the home button not working was giving me the 'sheets' so i just tried to flash most things for wifi xoom as i was hoping it would crack a difference but it didnt... i ended up seeing a post from stachre for an update and in it was there he had pointed to stock motorola files.. i grabbed these and preformed all wipes (user data, cache, delvik - i doubt it would do much but i did it anyway).. using fastboot i then flashed the boot.img, the system.img, the userdata.img and finally the recovery.img (can always flash over the CWM anway so not a big deal) and booted it back up... suprise suprise the home button was perfectly functional again (every other update/flash of software would seeming 'update' and not actually flash to that portion of the device thereby leaving my problem and the stock images must have actually hit these sectors) i know my answer is long but just trying to be helpful to anyone else with this type of problem (stock Xoom WiFi MZ604 HWI69 images from Motorola)
as a side note : this was followed by flashing the CWM again and booting into CWM and flashing the 2.1 hammer and then wiping user data and booting into the freshly updated rom stoked!
okay it seems the home button is not working at present. i have wiped all data and cache and dalvik cache a thousand times and tried reflashing, etc still to no avail. does anyone have any more ideas? its painful to push the back button a million times to get anywhere lol
joshndroid said:
okay it seems the home button is not working at present. i have wiped all data and cache and dalvik cache a thousand times and tried reflashing, etc still to no avail. does anyone have any more ideas? its painful to push the back button a million times to get anywhere lol
Click to expand...
Click to collapse
ok, so a few questions.
I am guessing it is rooted so my questions are:
What ROM are you using?
Have you tried other ROMs?
Have you been experiencing this problem since you installed the rom?
have you downloaded anything (APP, Live Wall Paper, a random APK File) before this happened?
Are you using a screen protector on the Xoom?
~If yes to the last question, is there any air bubbles or dirt in that area of the button?
~If no to last question, are you aware of any dirt or scratches in that area?
Have you tried the Home tab in Landscape as well as Portrait mode?
Have you just recently updated to a OTA that was pushed out by either Motorola/Verizon/etc?
There could be many possible reasons as to why this is happening... and I would like to help you (and who ever posts afterwords) to fix this situation. I or someone else on this board will respond as soon as possible to your problem and I hope this post helps to solve the problem
Cranvis said:
ok, so a few questions.
I am guessing it is rooted so my questions are:
What ROM are you using?
Have you tried other ROMs?
Have you been experiencing this problem since you installed the rom?
have you downloaded anything (APP, Live Wall Paper, a random APK File) before this happened?
Are you using a screen protector on the Xoom?
~If yes to the last question, is there any air bubbles or dirt in that area of the button?
~If no to last question, are you aware of any dirt or scratches in that area?
Have you tried the Home tab in Landscape as well as Portrait mode?
Have you just recently updated to a OTA that was pushed out by either Motorola/Verizon/etc?
There could be many possible reasons as to why this is happening... and I would like to help you (and who ever posts afterwords) to fix this situation. I or someone else on this board will respond as soon as possible to your problem and I hope this post helps to solve the problem
Click to expand...
Click to collapse
Okay mate ill answer each question firstly i was on the manta ray with update rom.. Everything was fine i was able to use it perfect as normal no updated apks no new apks.. I was fine i cam home from work seen the update so downloaded check the md5 and did all wipes as instructed in the tiamat 2.1 rom.. I had previously installed the kernal for that the day prior and was running great.. I tried reinstalling the previous rom again after a few reflashes of the 2.1 hammer and wiped that see if the button would come back to no avail..
I have a screen protector but it is fine i was using it for days prior wirh not 1 hiccup so that is definately elimated.. No pushed updates.. I went through all otas already before i flashed the manta ray stuff and as i said that was fine all the other buttond beside it work like tje back menu and switcher just the home does nothing
Cheers
Josh
Sent from my HTC Sensation Z710e using XDA Premium App
joshndroid said:
Okay mate ill answer each question firstly i was on the manta ray with update rom.. Everything was fine i was able to use it perfect as normal no updated apks no new apks.. I was fine i cam home from work seen the update so downloaded check the md5 and did all wipes as instructed in the tiamat 2.1 rom.. I had previously installed the kernal for that the day prior and was running great.. I tried reinstalling the previous rom again after a few reflashes of the 2.1 hammer and wiped that see if the button would come back to no avail..
I have a screen protector but it is fine i was using it for days prior wirh not 1 hiccup so that is definately elimated.. No pushed updates.. I went through all otas already before i flashed the manta ray stuff and as i said that was fine all the other buttond beside it work like tje back menu and switcher just the home does nothing
Cheers
Josh
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
Thank you for the speedy reply to my questions. And I am sorry to say, this is one that is over my head. I would suggest that you go to Tiamat's (Or current ROM's) maker and inquire for their help. I am new to some of this but I thought I should at least ask you the basics and make sure on everything. (Woo A+ Tech Training haha!) But unfortunately, I cannot help you with this problem because I do not know what could be doing this other then maybe a line of code didn't get placed into memory when the device was flashed, or maybe there is a small error in the code itself and only certain devices have this problem (different model number = slightly different change to the chip-sets and code of the device.) There are many things that could be the trouble, and like i said, unfortunately, they are out of my understanding of the device.
I do hope that you are able to get an answer soon to your question and I hope it is a simple answer.
Sorry I could not help any more but I hope others can!
Good Luck
joshndroid said:
okay it seems the home button is not working at present. i have wiped all data and cache and dalvik cache a thousand times and tried reflashing, etc still to no avail. does anyone have any more ideas? its painful to push the back button a million times to get anywhere lol
Click to expand...
Click to collapse
I reported this issue once before when I was using Xoom Zone a month or so ago. I hadn't wiped data, and it was like the home button was there just to look pretty. You could click it, it would highlight, but it was broken. If anything, I can be of service as I have had this issue once before.
I will need more info though. Do you restore data and try to hit the home button, or do you try the home button after a fresh data wipe without restoring data? It's hard for me to explain what I want you to explain, but...
diablo2224 said:
I reported this issue once before when I was using Xoom Zone a month or so ago. I hadn't wiped data, and it was like the home button was there just to look pretty. You could click it, it would highlight, but it was broken. If anything, I can be of service as I have had this issue once before.
I will need more info though. Do you restore data and try to hit the home button, or do you try the home button after a fresh data wipe without restoring data? It's hard for me to explain what I want you to explain, but...
Click to expand...
Click to collapse
A fresh data wipe mate exactly as the hammer rom thread instructed to do. No restore of data as i wanted to start fresh as i find less problems arise when u try to recover too much data and as the thread specifically called for a wipe i was more than obliging lol
Sent from my HTC Sensation Z710e using XDA Premium App
joshndroid said:
A fresh data wipe mate exactly as the hammer rom thread instructed to do. No restore of data as i wanted to start fresh as i find less problems arise when u try to recover too much data and as the thread specifically called for a wipe i was more than obliging lol
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
I see. I've never heard of this version of the problem. My problem occurred when updating from the 3.1 Rom to the 3.2 Rom. I only had this problem because I didn't wipe data the first time because after it booted up I thought all was well... until I discovered the home button was broken... lol.
Anyways, even I'm at a loss here for how we can solve your problem. A simple data wipe resolved mine in a heartbeat... but it seems your problem is still persistent even after a clean data wipe install... interesting... can't say that I've ever seen a problem stay in the memory even after a complete data wipe...
The only thing I can suggest is to maybe drop back to a stock Rom, maybe 3.1, then installing Tiamat from that fresh stock Rom with another clean data wipe before and after. That's all I can think of since after a data wipe it's still there. Good luck!
I dropped back to manta still with the issue.. Would a nandroid recovery possibly help fix as it takes precedence over an update cuz thwn someone maybe be able to help
Sent from my HTC Sensation Z710e using XDA Premium App
joshndroid said:
I dropped back to manta still with the issue.. Would a nandroid recovery possibly help fix as it takes precedence over an update cuz thwn someone maybe be able to help
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
That might help. I can help as much as I can, but...
Try to go full stock first before anything. Do not use Tiamat for right now. Install a completely stock, but rooted 3.1 Rom is what I suggest for you to do so that you can see if it's still giving you troubles on a stock Rom.
I tried that from the other thread and gained a bootloop.. Maybe stock 3.1 recovery and not just an update more to the point where would i find such? I only used otas as i was just speeding process to get to 3.2 to start flashing customs
Sent from my HTC Sensation Z710e using XDA Premium App
joshndroid said:
I tried that from the other thread and gained a bootloop.. Maybe stock 3.1 recovery and not just an update more to the point where would i find such? I only used otas as i was just speeding process to get to 3.2 to start flashing customs
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
I dunno man, I'm usually one who has great helpful answers, but... uh, this one stumps me. Like I said, I've never seen a problem that still persisted after a data wipe. It's almost as if it is much deeper than a data wipe, but more like something has locked itself into your Xoom's memory and won't leave without forcing it out manually... something must be messing with your system files or something like that. Possibly something left over from the OTA updates of some sort maybe. Very strange...
I would pass this by Team Tiamat. Sorry I can't help this time. Good luck!
I need a nandroid i think from someone
Sent from my HTC Sensation Z710e using XDA Premium App
joshndroid said:
I need a nandroid i think from someone
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
So you want someone to have a completely data wiped nandroid backup of the latest Tiamat Rom so that you can use that? That should work, especially if the backup has everything working perfectly. By having the ability to use nandroid backups you have nothing to lose since it can be restored very easily.
im not picky i would like a nandroid of any rom really mate... as long as the home button was working... so basically from a wifi US xoom (if compatibility was an issue) and the rest was okay yeh that would be great... i dont know anyone else with one here in AUS so someone here would have to help me out
p.s i have already tried the one from the dev thread of the stock 3.2 but that is bogus and doesnt really work for anyone and it didnt for me
joshndroid said:
im not picky i would like a nandroid of any rom really mate... as long as the home button was working... so basically from a wifi US xoom (if compatibility was an issue) and the rest was okay yeh that would be great... i dont know anyone else with one here in AUS so someone here would have to help me out
p.s i have already tried the one from the dev thread of the stock 3.2 but that is bogus and doesnt really work for anyone and it didnt for me
Click to expand...
Click to collapse
I have a 3G Xoom, but I can make a data wiped clean nandroid backup for the latest Tiamat Rom, which I am running since Tiamat supports 3G and Wifi models alike. I can do that after work tomorrow if you would like me to...
Or you could find someone who has the Wifi model and do that.
diablo2224 said:
I have a 3G Xoom, but I can make a data wiped clean nandroid backup for the latest Tiamat Rom, which I am running since Tiamat supports 3G and Wifi models alike. I can do that after work tomorrow if you would like me to...
Or you could find someone who has the Wifi model and do that.
Click to expand...
Click to collapse
thanks for ya help... i solved my problem and edited my first post
joshndroid said:
thanks for ya help... i solved my problem and edited my first post
Click to expand...
Click to collapse
Cool! I knew it was something with the system files. Case closed.
I do not want to restore if possible. I did OTA update to my wife's stock rooted phone last night and now the home key does not work. Back key is only way to home screen. It vibrates when pressed but no action. She is already pissed about her tethering being disabled again. Any suggestions appreciated. I really don't want to have to tell her I have to restore. She didn't want the update in the first place.
Sounds to me like a fxz flash is the best option.
Flash back to 2.3.5 and root.
Flash one of our handy ROM'S that are currently available.
Get your teathering via sqlite.
Then your set!
Sent from my MB865 using xda premium
Thanks. I already had her talked into it. Think I figured out possible problem. I remember she uninstalled ONE of the original at&t apps. Update said completed but I think may have corrupted something. She had a lot of FC today, definitely major issue. Back to stock we go!
Hmm. I don't think it should have ever updated over the air with some of the att bloatware missing.
Atleast it didn't for me.
Well, it sounds like your on your way!
Sent from my MB865 using xda premium
If you haven't flashed yet, you can boot into Recovery from the Atrix 2 Bootstrap and make a Nandroid backup, then after you flash to stock and update to 2.3.6 and root you can "Advanced Restore" the "data" part of the backup to keep your apps and settings.
"Search" opens without prompting on SGS4G phone. Annoying.
Is there a work around, freezing with TB is not doing anything.
Any help would be appreciated.
Check the screen & ensure it's clean & nothing is pressing the search capacitive button (looks like a magnifying glass) in the lower right-hand corner. It's also possible there's a problem with the button but I don't want to jump to that conclusion just yet.
or flash another rom
Flashing or a factory reset might help, too. I was shooting for the obvious and hopefully easy fix.
Any luck getting the issue fixed?
If I reflash? Is the progression factory reset, flash ROM, restore data via recovery?
Thanks,
Sent from my SGH-T959V using XDA
Use Gremlin Remover first. Then flash ROM of choice.
http://forum.xda-developers.com/showpost.php?p=22596598&postcount=1
And wait before you restore data to see if problem is fixed.
It seems to be working better thank you.
Sent from my SGH-T959V using Tapatalk 2 Beta-4
Was having some troubles with my phone so I decided to do a factory reset, wiped everything and flashed Synergy 1.3 and Imo Leankernel. I got everything restored with TB and seemed to be going fine. Then I figured out the home button wasn't working. I turned off the screen and tried turning it on using the home button and it works fine, but once I get onto my home screen or in an app it absolutely won't work. I tried long pressing it to see if it will bring up the recent apps--it doesn't. I have no idea where to go from here. I'm new to flashing and I don't know what I could have done to make this happen. Any help would be greatly appreciated. I have the unlocked icon so I don't think I will be able to get Verizon to replace it. Thanks in advance.
Zool4nd3r said:
Was having some troubles with my phone so I decided to do a factory reset, wiped everything and flashed Synergy 1.3 and Imo Leankernel. I got everything restored with TB and seemed to be going fine. Then I figured out the home button wasn't working. I turned off the screen and tried turning it on using the home button and it works fine, but once I get onto my home screen or in an app it absolutely won't work. I tried long pressing it to see if it will bring up the recent apps--it doesn't. I have no idea where to go from here. I'm new to flashing and I don't know what I could have done to make this happen. Any help would be greatly appreciated. I have the unlocked icon so I don't think I will be able to get Verizon to replace it. Thanks in advance.
Click to expand...
Click to collapse
first step would be to download the stock odin image from samsung-updates.com and flash that. See if the button works. If it doesn't work, somehow you borked your phone in the wierdest way but hey who knows.
Also flashing this will take away the locked icon.
Other option would be to flash a different rom, like beanstown, or mine, and see what happens. If it doesn't do it there, I would reflash synergy, but after verifying the md5.
Also are you using any sort of launcher (apex, nova, go, etc.), I noticed my home button was a little finicky with them?
nosympathy said:
first step would be to download the stock odin image from samsung-updates.com and flash that. See if the button works. If it doesn't work, somehow you borked your phone in the wierdest way but hey who knows.
Also flashing this will take away the locked icon.
Other option would be to flash a different rom, like beanstown, or mine, and see what happens. If it doesn't do it there, I would reflash synergy, but after verifying the md5.
Click to expand...
Click to collapse
kabro91 said:
Also are you using any sort of launcher (apex, nova, go, etc.), I noticed my home button was a little finicky with them?
Click to expand...
Click to collapse
I was using Apex at the time, but I also tried Nova and TW to no avail. It was the weirdest thing...so I ended up flashing ParanoidAndroid Hybrid Jellybean ROM and it is working out great for me so far. No issues with the home button, and even if it does happen again, I have the on-screen keys to save me
Alright so I was running ParanoidAndroid for a little bit, but I saw that the new Synergy 1.4 was released. I figured with a clean wipe and install everything would be back to normal. Installed fine, restored everything fine, rebooted just so everything would be working properly and then the problem is back again. Is there any way it would be something that I am restoring onto my phone? I still just have no idea...I downloaded a temp virtual home button so it still functions, but I'm at a loss here. Same issue as last time. My home key will turn on the screen, but then is useless after that.
nosympathy said:
first step would be to download the stock odin image from samsung-updates.com and flash that. See if the button works. If it doesn't work, somehow you borked your phone in the wierdest way but hey who knows.
Also flashing this will take away the locked icon.
Other option would be to flash a different rom, like beanstown, or mine, and see what happens. If it doesn't do it there, I would reflash synergy, but after verifying the md5.
Click to expand...
Click to collapse
Oh, also I don't have a PC to run Odin on, so is there any way I could flash the stock image from my phone?