hello i have a problem with the change of carrier x.x
i use QPST because i cant use CDMA WORKSHOP because i dont buy it $99 0.o
qpst detect xoom but with the wrong ESN: 7FFFFFFF
when i select in qpst "service programming" i select xoom and then i "read from phone" now i have charged the info and i change the info that i need change
now i "write to phone" and then the ESN change for the real ESN ( i know that is the real because i use CDMA WORKSHOP to watch my ESN)
however the "write to phone" didnt cancel and still charging when the charging finish the xoom disconnect and connect and the ESN still 7FFFFFF and the phone number dont change and when i "read from phone" this charge the old info the verizon info... im trying but i have the same result...
someone please helpme
hello? someone help me x.x
Hi! Are you from Mexico ? What QPST version are you using ?
helloo yeah im from mexico the qpst version is 2.7 build 362
Related
I have Samsung Mesmerize I500.04
Build SCH-I500.EI20
Firmware Version 2.3.5
I'm using CDMA Workshop 3.8
Debug mode is activated.
I Installed Samsung Kies (Will not recognize phone)
At first the phone was recognized in CDMA Workshop and my only problem was being unable to get the SPC....
Now, CDMA workshop says 'phone failed to respond' and wont read anything!
Ive tried factory reset..
Ive tried re-installing drivers
resetting phone, and computer...
idk what else to do!!
I need to know how to make CDMA recognize the phone and then i need to retrieve the SPC as well so that I can make changes to the phone.
Any help would be greatly appreciated.
kevinjmckenzie said:
I have Samsung Mesmerize I500.04
Build SCH-I500.EI20
Firmware Version 2.3.5
I'm using CDMA Workshop 3.8
Debug mode is activated.
I Installed Samsung Kies (Will not recognize phone)
At first the phone was recognized in CDMA Workshop and my only problem was being unable to get the SPC....
Now, CDMA workshop says 'phone failed to respond' and wont read anything!
Ive tried factory reset..
Ive tried re-installing drivers
resetting phone, and computer...
idk what else to do!!
I need to know how to make CDMA recognize the phone and then i need to retrieve the SPC as well so that I can make changes to the phone.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
What exactly are you trying to do? if your just trying to reprogram the phone and it is attached to your line just USCC made it so all you have to do is *228 and it will automatically provision itself. I cant think of another reason why you would possibly want the spc code. I dont visit this forum often anymore so if you want a quicker reply go through my profile i guess to send message.
Still need help!
I PM'd you. Anyone else who has any ideas?
UPDATE: I just need to know how to make the phone respond to CDMA Workshop.
pmd you back... are you sure you have appropriate drivers installed?
is your phone in modem mode and dial up?
bought cdma workshop nov. 2011, free upgrade until nov. 2012. interested in transfering the license to you please leave a private message
HI GUYS...
I UNLOCKED MY SAMSUNG GALAXY INFUSE AS USUAL, AND ITS OK "UNLOCKED"...
BUT WHEN I INSERT MY SIM CARD IT WORKED FOR FEW MINUTES, AFTER THAT IT SAYS NO SERVICE AND THERE IS NO SIGNAL AT ALL... BUT SOMETIME I GOT SIGNALS BUT WITHOUT REGISTERED NETWORK.
NOTE:
MABY THE PROBLEM FROM THE IMEI NUMBER, BECAUSE I GOT IT WRONG , IT IS LIKE IN THE ATTACHMENT.
PLEASE GUYS HELP ME ....
Yep, a borked imei number will not allow you to connect to your cellular network...
I'm guessing that your efs folder wasn't backed up... you can try this...http://forum.xda-developers.com/showthread.php?t=881162
I haven't tried this but good luck.
thank you brassguy...
but does this work for infuse 4G ?
In addition, I read that we can change the IMEI number using the ADB, or is there another way to do this?
Also, what about the GSII_repair app, can I use it for my phone (infuse 4G)?
i had this problem last night where i flashed a rom. i return it to stock and imei showed up.
was having a imei" unknown error" and i backed up now on my computer.
ps ebay sales unlock service for 0.99$ if you didn't buy the code and just hacked it with hex or whatever
mine is already unlocked and it's permanent
i do travel over seas alot
But i returned mine to stock many times but the imei number still like this.
I did no get you in the third line???
BrassGuy said:
Yep, a borked imei number will not allow you to connect to your cellular network...
I'm guessing that your efs folder wasn't backed up... you can try this...http://forum.xda-developers.com/showthread.php?t=881162
I haven't tried this but good luck.
Click to expand...
Click to collapse
It does not work for me....
Because I did not find the those numbers in hexeditor
THERE ARE 3 Total Lines you will need to edit:
00188008
00188010
00188020
or maby I did something wrong
Please guys someone help me to solve this problem ,because I can not use the phone....
No one have ever faced or seen this problem with someone and solved??
ood evening friends, I ask for your support, I need to load prl to a kyocera c5170 achieved and enable mobile boss, set sid, nid, number, min etc, and I have the spc too, here my problem is that I want to load prl using QPST or workshop but neither reconose the device in my file manager detects KC02US KYOCERA USB serial port, but I never detected any program to work the equipment and charge prl, could explain the correct procedure please, for your attention to my fellow post thank you very much.
I flashed a SCH-i535 Galaxy S3 Verizon but cricket needs a ESN. I can't find it on the box or phone settings and the dialpad code doesn't work. I think its because I'm on Android 4.3. Programs such as CDMA workshop doesn't show the ESN in the proper format its like in hex. How does one go about this situation? I need help ASAP thanks!
elitehacker said:
I flashed a SCH-i535 Galaxy S3 Verizon but cricket needs a ESN. I can't find it on the box or phone settings and the dialpad code doesn't work. I think its because I'm on Android 4.3. Programs such as CDMA workshop doesn't show the ESN in the proper format its like in hex. How does one go about this situation? I need help ASAP thanks!
Click to expand...
Click to collapse
Take the battery off the back of the phone, I'm almost sure its there
Hi,
I am sorry that I post this message in the wrong place, I believe it belongs to this thread
I have just return from US and I got a LG Leon from MetroPCS to sty connected while there. Now that I am back I unlocked the phone via unlock app. My surprise came when I put me Spanish SIM card (Jazztel) and the phone only gets 2g connection. I have been searching the net and I found some threads on the topic but I can not make any of them work on my phone. First I tried changing the radio to Europe mode through *#*#4636#*#*, and I enter the test page but when I click the phone info button I get a message that states that I can not run that application on this device. I thought it was because I wasn't root so I rooted it. But before I could root I had to downgrade by flashing an older firmware. No way, I get the same message. I tried the hidden menu to see if I could find an entry to change the radio mode, or any type of LTE configuration. Hidden menu on my phone though 277634#*#. I also tried the anycut option, but I do not get any facility called LTE configuration or similar.
I am desperate and I do not know how to proceed. Any help is welcome
Thanks in advance