Related
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
did you let it finish? the ic microchip and arrow pointing thing? or did you yank out the battery?
i panicked and yanked out the battery...i killed it, didnt i?
I think he didn't let the phone finish and restarted the phone cause it wasa taking too long if that's the case 99.0% the phone is bricked. It happend to somebody else here already. Jy
He just call tmobile and told them the wasn't turning on and they send him a replacement.
I think this is something that needs to be added to the flashing roominstructions.
slyfury said:
i panicked and yanked out the battery...i killed it, didnt i?
Click to expand...
Click to collapse
Im sorry man, you did the one thing you shouldnt have while flashing
Perrosky said:
I think he didn't let the phone finish and restarted the phone cause it wasa taking too long if that's the case 99.0% the phone is bricked. It happend to somebody else here already. Jy
He just call tmobile and told them the wasn't turning on and they send him a replacement.
I think this is something that needs to be added to the flashing roominstructions.
Click to expand...
Click to collapse
i agree 100% please add that to the instruction for noobs like me
oh well, i just hope i get a replacement quickly
that happened to me so i called t-mo and told them that my g1 wont turned on at all and tried the other battery so they send me a replacement. of course i was a noob back then. i learned my lesson in a hard way so i suffer a week without my precious g1 lol.
slyfury said:
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
Click to expand...
Click to collapse
also once you called t-mo do not let them know that youre modifying your phone otherwise they will not send you another handset.
slyfury said:
i followed the instructions to the letter and after it was done
i was presented with a picture of an IC microchip and an arrow pointing down.
i restarted the phone and now it wont start.
i cant get into bootloader mode or recovery mode...
Please help me get my phone back!!!!
Click to expand...
Click to collapse
how about take out the sdcard and connect it to the computer, put the jfr33 in it, and flash your phone again. It works
also he could try getting into recovery mode using adb or sumthin...i am not too sure about it...but i think it can be done..!!!
tannyfiles said:
also he could try getting into recovery mode using adb or sumthin...i am not too sure about it...but i think it can be done..!!!
Click to expand...
Click to collapse
If the phone can't reach the bootloader or recovery console I don't think ADB is going to work but I could be wrong.
patience is a virtue
your topic title is misleading and could lead users who haven't tried yet to be too wary about flashing over to Haykuro's builds...
Ultimately...your phone didn't mess up after flashing 4.X..YOU messed up.
if you cant turn on youre g1 then it is dead, even if you connect it to pc or what if it cant be turned be on, it is dead cuz thats what happened to me so just call t-mo and tell them youre phone wont turn on and you tried another battery still wont turn and DO NOT tell them you modify or even saying you attemped to modify your g1's rom.
the best thing for him to do would be flash rc29 nbh and start from scratch...the phone is more than likely not bricked.
korndub said:
the best thing for him to do would be flash rc29 nbh and start from scratch...the phone is more than likely not bricked.
Click to expand...
Click to collapse
To my opinion, i do not think the phone is bricked since there is no hardware issue is involving, it's the software itself, if he can access to the root of the sd card, problem is solved.
but oh well, i would call Tmobile and request a new shinny phone . wait... they will send a refurbished one won't they? oh noo...
I have a similar problem, i was attempting to move apps to the sd card, partitioned it, installed the lucidrem rom and then started using his code and the flashing android loop started, turned it off and back on and still the flashing android, i used the fastboot method to restore my nandroid backup, and the phone is back to working, my problem is that i cant access recovery mode.
everything else is fine, just when i try to load the recovery mode it just stays on the boot screen, can anybody help a newbie out?
the bootloader works, and the phone can load normally, but the recovery mode wont start.
cueballv2 said:
I have a similar problem, i was attempting to move apps to the sd card, partitioned it, installed the lucidrem rom and then started using his code and the flashing android loop started, turned it off and back on and still the flashing android, i used the fastboot method to restore my nandroid backup, and the phone is back to working, my problem is that i cant access recovery mode.
everything else is fine, just when i try to load the recovery mode it just stays on the boot screen, can anybody help a newbie out?
the bootloader works, and the phone can load normally, but the recovery mode wont start.
Click to expand...
Click to collapse
That happened to me also. When I installed lucidrem's rom the recovery would work. What it actually was that when you first rooted your g1 do you rmr installing the recovery img? Well its pretty much the same thing lucidrems rom didn't have a recovery img command line attatched to it. I just installed recovery again from the terminal emulator just like it said in the root your g1 thread.
Atleast that is my side of the story. I don't anything about coding. So I could be wrong but that was just my experience.
bigballa said:
That happened to me also. When I installed lucidrem's rom the recovery would work. What it actually was that when you first rooted your g1 do you rmr installing the recovery img? Well its pretty much the same thing lucidrems rom didn't have a recovery img command line attatched to it. I just installed recovery again from the terminal emulator just like it said in the root your g1 thread.
Atleast that is my side of the story. I don't anything about coding. So I could be wrong but that was just my experience.
Click to expand...
Click to collapse
wow, thanks alot for your help, reflashed the recovery.img and it worked a treat, thought id bricked it good and proper, but your advice worked, thanks again.
Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development
rozzko said:
Getting Rainbow screen on every boot and when trying to get to recovery mode
For some reason I cannot get my computer to detect my device thus I can not even get into download mode. when I launch Odin and and not able to access my SD. I am at a lost here since now I cannot flash nor can I odin to get back to stock can anyone help here? I think I have tried everything I can find.
I just recently flashed octane 2.x per the instructions under development
Click to expand...
Click to collapse
If you came from Froyo, follow this guide: http://forum.xda-developers.com/showthread.php?p=16762954
Hope this helps.
sent from my CommandCenter using xda premium
sounds like the bootloader.
flash a froyo rom, then try to odin. AFTER you have tried installing the drivers linked in the previous post. That guide should work.
Did you get this fixed?
Sent from my SGH-T959V using xda premium
I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance
I bought a Jig an can get into download mode but still cant get into recover (because of the rainbow screen) and i cannot get my computer to recognize my my phone either via sd or via odin or i think i could solve this.
thanks in advance
Click to expand...
Click to collapse
Go into the control panel & uninstall the USB drivers & kies mini if installed. Then reinstall Kies Mini & use the menu option to reinstall the drivers. See if that helps.
Sent from my SGH-T959V using XDA App
I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!
rozzko said:
I re installed drivers several times and used a different machine. I feel like I am stuck and there might now be a solution to this except toss the phone in the ocean!
Click to expand...
Click to collapse
Could it be the cable you're using? I've seen quite a few posts here about people using cables that were bad and/or too long and it prevented the phone from being recognized via USB. People could charge the phone but not use ODIN or anything.
Do you have a different cable to try?
ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB
rozzko said:
ive tried two different cables, i could try another one thats a good idea. somehow i think maybe i messed up the mounting, i thought i followed the instructions to a t. UMMU .. i will try a few different cables when i get home tonight... actually just tried at work no dice, my system storage is also only showing 126 MB
Click to expand...
Click to collapse
I thought the phone did not boot up. How are you seeing how much storage you have left?
I'm curious to know what state it really is in. There has to be a way to get it going for you.
the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery
rozzko said:
the phone boots fine during the boot after the initial boot screen where it says galaxy s 4g it goes into rainbow patterns. so every time i try to get into recovery when I am in the recovery menu (or into where the recovery menu should be) i cannot see anything because of the rainbow screen. I was told maybe i have the wrong boot loaders installed.
because i cant see recovery and I cannot get my computer to see my phone I have no idea what to do get my phone back to stock to start over.
This is why I am stuck.
If i could get my computer to see the phone I think i could odin back to stock, using the dongle is half the battle as i can get in recovery
Click to expand...
Click to collapse
Pardon me if I'm not getting it....but yo said it boots fine but then you get the rainbow screen when the Galaxy S 4G logo should appear? The rainbow screen is definitely a boot loader issue. I'm just trying to figure out a way to either get you into a download mode where the phone is recognized or into recovery so you can get it going again.
How are you getting it into recovery mode?
I'm wondering if Heimdall would be your best bet? You could try to download it from here, extract it somewhere, then go into the Drivers folder and double-click zadig.exe. Select Options from the menu bar, select List All Devics then select Samsung Android Composite (something along those lines), then click Install Driver. This is a different driver than the one that comes from Samsung.
After that, maybe try Bhundven's [Heimdall][One-Click][UVKJ6] The KJ6 Heimdall One-Click Collection [12/11/2011]. Select whichever one-click file you want to go for and follow his instructions. They all have the GB bootloaders in them, so you should be set.
Usually both volume buttons power button for a few secs or through rom mgr
rozzko said:
Usually both volume buttons power button for a few secs or through rom mgr
Click to expand...
Click to collapse
From what I've read ROM Manager is a no-no on this model phone. I dunno why, but I've read that on a few threads.
Let me know if you're able to install Heimdall and the open source drivers that come with it. If you can, you can get into download mode, and it sees the phone, then you can try the One Clicks or even just flash the boot loaders from a ROM that contains them.
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Ugh...well let's hope for the best. I would uninstall any drivers and programs like Kies you have installed first, then install the Heimdall drivers. Let me know how it goes.
so i uninstalled drivers executed Heimdall and put phone in download mode with dongle. the computer still did not detect phone, however i got my replacement SGS4 today put it in download mode and it was detected immediately.
I dont know what else I can do do get the phone detected or fix the boot loader to get into recovery
rozzko said:
I will try when i go home tonight.
just an fyi every time i plug in my phone, it does not show up on my computer. i have tried using debugging mode and mass storage and neither work.
Click to expand...
Click to collapse
Maybe I'm missing something. How are you switching between debugging mode and mass media if you can't boot the phone?
The way I understood the problem, you would get to the SgS logo screen during boot, then the whole screen would be covered by the rainbow effect, which renders the screen unreadable, nd thus the phone unusable. Is that correct, or is the problem different?
the rainbow screen happens right after the SGS Logo then fades out once the lock screen comes on.
it also shows up once I try to get into recovery but from that point I cannot see anything and have to reboot.
Phone works after fully booted
both debugging and mass storage have been tried
You need to flash the "GINGERBREAD" bootloaders. This issue is 100% caused by froyo bootloaders. Once you obtain the GINGERBREAD bootloader, there is a 100% chance that the issue will go away. Flash THISTHIS/download. in heimdall. Get into recovery, then flash a rom of your choice.
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Drdandy said:
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Click to expand...
Click to collapse
You only flash pd98 files from fast boot not from CWM recovery. Boot in bootloader and it will find it
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Drdandy said:
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Click to expand...
Click to collapse
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
zelendel said:
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
Click to expand...
Click to collapse
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Since you can boot into recovery, adb should still work. Enter recovery then plug in your phone to PC and run adb reboot bootloader
Have you tried reflashing a rom in recovery aswell?
Drdandy said:
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Click to expand...
Click to collapse
If you are booting into CWM your not back to factory. As stated above you can use adb to boot into bootloader
Just making sure I'm doing this right as its the first time I've ever use adb commands to me phone. Do I need to downloand Android SDK to write commands to the phone?
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Drdandy said:
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Click to expand...
Click to collapse
OK looks like your bootloader is messed up. Go to the ace hack kit thread. There you will find a link foe the IRC chat room. Go there and tell them what you did. They maybe able to help you.
I haven't found this issue so here is my story...
For some reason my lock PW keyboard changed to numeric on me today and for the life of me I couldn't get it to go back so after an hour of rebooting, flash back-ups in CWMR and removing the batery, nothing would get me back to a regular keyboard. I got flustered and just punched in stuff seeing that warning that if I fail again it will erase all data. I thought that will be a pain but I can restore everything in an hour or so because I back everything up, right? WRONG. All data was ALL F$%^&ng data! external SD, cleaned off too.
BUT hold on, I have it also backed up on my PC because I'm smart still right? No dice...get error E:Can't open /sdcard (bad)
So this is what I have to work with...
I can get into CWMR Touch v5.5.0.4 ( I can see what is on my external SD card but cant run anything)
I can get into DOWNLOAD mode BUT Oden wont recognize...it reads device connected for about 2 seconds and then device disconnected)
If im CWMR mode Oden will see my device...not sure if that is good or bad
if I just power on the phone it just goes to the samsung logo and starts booting but never quite gets there....( I left it spinning for 20 min and nothing...)
Any thoughts?
I feel if I could get ODEN to see my phone I would be in good shape.
Also I have another phone and SII and all is read fine so I know it isn't my cord, USB, PC, ODEN...
Thanks in advance
Oh...I think my phone isn't in debugging mode...and that could be it but how could I get in to check if I cant boot the phone?
First you have to make sure your phone drivers are installed correctly, so either download and install kies if you don't have it. Or if you have it got to connection troubleshoot, make sure your phone is not plugged, let it run and when its done put your phone into download mode and connect it. Let the computer install the drivers, don't unplug the phone until it's done or it may screw up. When its done close kies completely and run odin.
Did you try simply flashing a rom from CWM?
And I'm pretty sure you could get a restoration program and recover the data from your external SD card, usually deleting only means its being marked as free space but all the previous data should still be there until something new is written.
When you in download mode are you pressing the up volume to confirm you want download mode?
You can go into download mode but still need to hit up or down to confirm.
As for CWM not reading your external SD did you check to make sure that it's mounted?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
specter07 said:
When you in download mode are you pressing the up volume to confirm you want download mode?
You can go into download mode but still need to hit up or down to confirm.
As for CWM not reading your external SD did you check to make sure that it's mounted?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
CWM "read"s my SD card, ( I can see the rom and backup on it) but once I try to flash, that's when I get the error saying the the path is not valid :/
For DL mode, yes, I hit up and the little droid shows up saying Downloading. In the Upper left corner it reads
ODIN MODE
Product Name :SGH-I727
Custom Binary Download: NO
Current Binary: Samsung Official
kishke said:
First you have to make sure your phone drivers are installed correctly, so either download and install kies if you don't have it. Or if you have it got to connection troubleshoot, make sure your phone is not plugged, let it run and when its done put your phone into download mode and connect it. Let the computer install the drivers, don't unplug the phone until it's done or it may screw up. When its done close kies completely and run odin.
Did you try simply flashing a rom from CWM?
And I'm pretty sure you could get a restoration program and recover the data from your external SD card, usually deleting only means its being marked as free space but all the previous data should still be there until something new is written.
Click to expand...
Click to collapse
The only way I can get the phone to be read by my PC is in CWMR..Keis will not recognize it but I did reinstall the drivers.
Should I remount in CWMR? Would it still read what was on the card if it wasn't mounted correctly?
I got ODIN to read my device and was able to flash Stock ICS 4.0.4 on it!
Thanks for your feedback!
:good::good::good::good::good::good:
So it was driver issue after all.
Yup...not sure what the deal was with the driver though in the fist place. It wasn't like I reloaded it this morning. :/
Sent from my SGH-I777 using xda app-developers app
My phone has been all screwy for months. I recently given up on it and bought a new phone but it irritates me that I still cannot fix this old phone.
After attempting to flash a new rom onto my phone everything went wrong. When I attempted to reboot the phone the phone showed the SAMSUNG screen then goes to CWD for recovery. I cannot fix this at all. Eventually I decided to run GTG's Ultimiate Unbrick thinking that Odin3 would fix my situation. It continuted to give me FAIL with every attempt. Now, the phone won't even show the SAMSUNG screen or the recovery screen. It just stays black... What can I do? Junk it? Is it permanently broke.. This is so upsetting.
Are you still able to access download mode? If so then i would try Heimdall this time using THIS flash file. Flash it once, let it reboot, then shutdown and go to download mode again. Flash once more with the "flash bootloaders" box checked. Has always worked for me when i screw something up due to not paying attention.
If you cannot access download mode WHAT-SO-EVER, i'm afraid i am unable to help.
Good luck
DarK_DemoN said:
Are you still able to access download mode? If so then i would try Heimdall this time using THIS flash file. Flash it once, let it reboot, then shutdown and go to download mode again. Flash once more with the "flash bootloaders" box checked. Has always worked for me when i screw something up due to not paying attention.
If you cannot access download mode WHAT-SO-EVER, i'm afraid i am unable to help.
Good luck
Click to expand...
Click to collapse
Tried today to put it into download mode. The screen flashes on completely white and back off. I can hear it connecting and disconnecting from the computer repeatedly. Im guessing there is nothing at all I can do from here. This really sucks.
mramazingpanda said:
Tried today to put it into download mode. The screen flashes on completely white and back off. I can hear it connecting and disconnecting from the computer repeatedly.
Click to expand...
Click to collapse
Does it connect and disconnect by itself? If it does then sounds like a hardware issue. If you can get it to connect to your computer open the JAR flash file which will open Heimdall after a few seconds (10-20). Once it's open press the Vol-Up button on your phone and see if Heimdall can see it (should say "Connected" in green at the bottom right).
Give it to me lol I'll fix it
Sent from my dr0id running Liquid Smooth r0m
I had something similar happen to me a long time ago. I would try to put it in download mode and the screen would do something but then just shut off. I pulled up heimdall and it said it was connected. I might have just gotten lucky. Give it a try though.