Now,ring plays after vibrate . vibrate again until the ringtone is over.how can I make ring & vibrating as the same time ?
I've noticed this too. It's quite irritating.
I own a HTC Mozart.
I have this same problem
There was another thread about this but the answer was to edit the HKCU\ControlPanel\SoundCategories\Ring\RingerOnVib\rateOn\Script key to "v0p"
Unfortunately, on my phone this has a DWORD value of 13897104, nothing that resembles a String. Even if you change the key to a String with that value it won't work. So, anyone knows if it's possible to fix this? For those with the same problem my "fix" is to use a very short, 4 second or less, custom ringtone. That way the phone will vibrate every 4 seconds, better than nothing.
BTW, using a LG Optimus 7 with the Mango update.
Related
Anyone have Slow Ringer Response problems? It takes 2-3s before a call registers and the phone rings.
Vibrate before ring?
I was missing a lot of calls with like you say a 2-3 second delay before I heard any ringer, then i realized I had phone set to "vibrate BEFORE ring" rather than "vibrate AND ring"
Could it be that?
Good luck.
speakerphone said:
Anyone have Slow Ringer Response problems? It takes 2-3s before a call registers and the phone rings.
Click to expand...
Click to collapse
Well, maybe a second or two at max, but yes there is a delay.
What you can do, depending on your provider, is go into the phone settings, and call forwarding, and adjust the delay before it forwards unanswered calls to voicemail to 30 seconds.
I've made this change on my wife's phone as she always takes 29.9 seconds to find the phone in her handbag!
BadTasteUK beat me to it. This will not solve you delay issue, but should allow you sufficient time to answer the call.
same here. main prob that most people i know only allow 3-4 rings before hanging up.
same here.
i have a regular Phone anf it Allway rings a few seconds B4 the Polaris.
i remember having the same problem with previous htcs. maybe someone has found a way to resolve this. i ll search in the fora for previous models. hopefully we ll find somthing.
the same for mine with China mobile Chinese Version
I have dozens of 'missed calls' that don't ring, due to delay
I think it is connected in two ways:
1) Getting from standby mode is slow, takes a while to start again some services
2) Loading mp3s or wav files(ringtone) takes a small amount of time
Solution:
Find a way to cache sounds and/or have certain call services running all the time(which would drain battery faster)
This is an inherent windows mobile problem, and has been around for ages...
With little effort it could be done.
are all WM affected, or some brands worse than others?
I have found that I always get a delay of one ring before my HTC starts to ring. but it is worse if I use an mp3 rather than a mid or even wma. I also found that if I cut down the mp3's size to around 30 secs then it loads quicker
Try this solution :
Go to "HKCU\ControlPanel\Sounds\RingTone0\Script" in registry
normaly, you have this : apw3r
Replace by : apr
Explication :
A = Activation (??? i'm dont know)
W3 = Wait 3s
R = Ring
You can add "v3" if you want vibrate 3s !
No, it doesn´t work... only wait n seconds to repeat playing ringtone
24. Change ringtone/vibrate/LED flash characteristics
If you would like more control over how your device rings/vibrates/flashes its LEDs on events, you can can change the Script values of these events. For example, for an incoming call performing 'activate device, play ringtone, wait 3 seconds, repeat':
HKCU\ControlPanel\Sounds\RingTone0\Script = "apw3r" (REG_SZ string, no quotes)
For performing 'active device, set volume to 33%, play ringtone, set volume to 67%, play ringtone, set volume to 100%, play ringtone (no repeat)':
HKCU\ControlPanel\Sounds\RingTone0\Script = "ac33pc67pc100p" (REG_SZ string, no quotes)
The following are the full codes available to you. Please note that all the codes are executed simultaneously except after a ringtone play / wait code. E.g. 'v1p' will vibrate and play at the same time, while vibrating for 1 second. But 'pv1' will play the ringtone through all the way first, then start vibrating for 1 second.
a = activate device
cN = set volume to N in percentage max volume
fN = flash notification LED for N seconds
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
erf, sorry
3 second delay
There is a software program called "tweaks 2k2.net". Under the heading of Phone tweaks there is an option to disable the 3 second ringtone delay (it works fine for me). So I think the delay has been put there for a purpose. The only downside is that you have to purchase the software. Hope this helps.
3 second ringtone delay is set and unset in the control panel already
my machine uses sktools, and under "option to disable the 3 second ringtone delay" it was already disabled but still slow.
Hey I have a small problem with my Fuze. Why is it that the phone will flash the light around the D-Pad before it starts to play my ringtone? Is anyone else having this problem? I want my phone to immediately start ringing when receiving a phone call instead of getting the flashes first. I miss many calls because by the time my phone actually plays my ringtone, it'll have gone by about 3 or 4 rings from the caller. Any help is appreciated.
change dialpad to win 6.1 default
change ringtone to a .wav file
That will speed it it up by 3-4 sec. You will never get rid of all the lag though. sorry
I think theres a setting without DiamondTweak that enables you to disable the delay between the call be recieved and the ring or vibrrate initiating. Check it out here:
http://forum.xda-developers.com/showthread.php?t=409540
djcaston said:
I think theres a setting without DiamondTweak that enables you to disable the delay between the call be recieved and the ring or vibrrate initiating. Check it out here:
http://forum.xda-developers.com/showthread.php?t=409540
Click to expand...
Click to collapse
Unfortunately that only changes the delay between the first ring and consecutive rings, not the initial delay before the first ring.
Thanks, it made a enough of a difference that it is no longer a nuisance.
I'm Running NATF v4.7 on my fuze and everything works great nice and speedy. The only question I have and this really isn't ROM specific I don't think, is there a way to change the duration of the vibrate when you get a new sms? I keep my phone on vibrate most of the day on my desk and the way it is now it's about a 8 second vibrate and its more of a ringtone then a quick alert.
~Thanks
have you looked into the sms notification in sounds and notifications in settings
to see what you can do with the settings there?
I have , all you can do from there is turn vibration on and off but not change how long it will vibrate.
I was also wondering the same thing. I just got my fuze the other day and first thing i did was flash NATF's 4.7 so i thought it was the device.. Do other roms not vibrate as long for a sms?
Also there are registry keys to edit the script of rings and alarms etc.. if we can find the one for sms we can tell if its fixable or not.
theres actually an app for this....its called VA alert and you can find it on blownfuze.org
Thanks for recommending that site, got some interesting apps on it. BUT VAlert (i think thats what you were referring to) only edits the ringtone script.
blownfuze.org said:
For incoming calls you definitely want VAlert1.21 (updated) by this guy which will let you customize down to the millisecond the pulsing patterns of the vibrator so that it gets your attention better than it otherwise would. I don't know if there's a similar thing for text and email but get this and subscribe to the thread for updates.
Click to expand...
Click to collapse
I searched through the registry and could not find a script for text messages.
Anyone that has used NATF's 4.7 rom and another rom, is the text vibrate duration the same, or shorter on other roms?
fone_fanatic said:
Thanks for recommending that site, got some interesting apps on it. BUT VAlert (i think thats what you were referring to) only edits the ringtone script.
I searched through the registry and could not find a script for text messages.
Anyone that has used NATF's 4.7 rom and another rom, is the text vibrate duration the same, or shorter on other roms?
Click to expand...
Click to collapse
I've used about ∞ roms and so far with all of them they all have a long vibration for if you have the phone on any setting above just vibrate, and then have a three pulse vibration for if you have the phone set on just vibrate. I've also wanted to change this too a different setting, but unfortunately the closest thing thats ever came up is VAlert, and that doesnt deal with SMS . I've also looked in the registry, but I couldn't find anything
if you go to [HKCU\ControlPanel\Sounds\Ringtone0\] You have the String Value "Script" By default it is av0pw3r [a=activate, v=vibrate, 0, p=play, w=wait, 3 seconds, r=repeat]
So this tells the device when you get a call it should activate the device, vibrate 0 (continuoulsy, if it was 1, it would only vibrate for a second) play the ringtone, wait 3 seconds, then repeat.
I'm pretty sure VAlert is just so you don't have to edit the registry manually.
NOW to our situation, since "Ringtone0" is for incoming call ringtone, maybe we can manually add a new key that refers to the new message sound and manually add a script and see if that works? ANyone have any ideas what the device refers to for new messages?
fone_fanatic said:
if you go to [HKCU\ControlPanel\Sounds\Ringtone0\] You have the String Value "Script" By default it is av0pw3r [a=activate, v=vibrate, 0, p=play, w=wait, 3 seconds, r=repeat]
So this tells the device when you get a call it should activate the device, vibrate 0 (continuoulsy, if it was 1, it would only vibrate for a second) play the ringtone, wait 3 seconds, then repeat.
I'm pretty sure VAlert is just so you don't have to edit the registry manually.
NOW to our situation, since "Ringtone0" is for incoming call ringtone, maybe we can manually add a new key that refers to the new message sound and manually add a script and see if that works? ANyone have any ideas what the device refers to for new messages?
Click to expand...
Click to collapse
Ringtone1? Ringtone2? Maybe the numbers are used to designate different types of incoming data
Hi folks,
I got an Omnia 7, and i really love it, except that its ring&vibrate function.
So, at default, when i receive a call with ring&vibrate setting my phone first vibrates 3-4 times, and just after that starts ringing, but without more vibrates.
But I want it to vibrate&ring at the same time!
I found a solution in the HD2 topic, but this is just half-solved my problem: edited a value in registry, and then when my phone rings it vibrates continously.
There is the value:
HKCU\ControlPanel\SoundCategories\Ring\RingerOnVibrateOn\
This was my default value (3-4 vibrates then rings): av0.1w0.3v0.3w0.3v0.1w0.3v0.3wo.3pr
This is the new value (rings&vibrates continously): v0p
My question is: can some expert make me a value, that do the ring and at the same time "repeat: (3-4 time short vibrate, 1mp pause)"?
The continous vibrate is very annoying, and harder to feel it then short vibrate cycles.
(And if it could be done, than maybe we can think about more combinations, if someone else is interested in it )
Really thanks if someone can make it!
isn't it wierd to Ring and then Vibrate? Just a question
Anyone pls?
i found some descriptions about script
a = activate device
cN = set volume to N in percentage max volume
p = play ringtone. Note that this will play the ringtone all the way through before continuing with the next code.
r = repeat. Note that this should be the last code in your Script string, if used at all.
vN = vibrate for N seconds
wN = wait for N seconds. Note that the device will wait this long before continuing with the next code.
it's clearly
thx. for plapic
http://forum.xda-developers.com/archive/index.php/t-681227.html
Yeah... I miss lots of calls bcoz of this vib then ring system
After getting some call on my home phone from people trying to reach me, i realized that the ringtone on my LG Fathom is not working. After going into setting and trying to set the ringtone I also realized that i couldn't even test the ringtone. When i press the play button i hear nothing. even when i select the ringtone without testing it and press ok the screen just flicker a little and resets itself to the defualt ringtone. I saw some forums about similar issues but its not for this particular phone and some are not even resolved. can someone PLEASE HELP?