Has anyone gotten their Transformer to connect to a wireless network using WEP security? I have a Netgear WNDR3700 and mine will only connect via WPA, but I have another device that needs WEP. Any suggestions appreciated.
I have a WNDR3700 and it connects to the G network with WEP no problem.
Maybe post a screenshot of your WNDR3700 wireless settings..
Sent from my Asus Decepticon using Tapatalk
WEP works fine on mine.
Here are the wireless settings. They are set to WPA now.
What firmware are you on? You're using the key not the passphrase, right? You may want totry a different channel too' like 11.
Sent from my Asus Decepticon using Tapatalk
Jocelyn said:
What firmware are you on? You're using the key not the passphrase, right? You may want totry a different channel too' like 11.
Sent from my Asus Decepticon using Tapatalk
Click to expand...
Click to collapse
Firmware is 1.07.98NA. When using WEP I was using a key. The screenshot is after I changed to WPA.
Well, I just reset my router and now I'm missing WEP too! I'm going to look into this, so either use WPA or WEP on a guest network until I figure this out.
Edit: You need to use 54 Mbps mode to use WEP.
Sent from my Asus Decepticon using Tapatalk
Related
Ok on my Captivate i can only get speeds of 4mbps. I have a wireless n router. (wrt160n). I do have a wep for security but and unsure if that should affect.
All this speed test is with n 10ft from router
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
chvybeatsford said:
Ok on my Captivate i can only get speeds of 4mbps. I have a wireless n router. (wrt160n). I do have a wep for security but and unsure if that should affect.
All this speed test is with n 10ft from router
Thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
mine is about 6 down, 4 up. 4 isnt all that bad imo.
Did more reading online and have solved it for now. Seems when my router is in mixed mode it wont connect on N. Put my router in N only and able to get 15 down and 1.8 up.
All my G devises still connect so just gonna leave router like i just set it up(N only)
Thanks.
chvybeatsford said:
Did more reading online and have solved it for now. Seems when my router is in mixed mode it wont connect on N. Put my router in N only and able to get 15 down and 1.8 up.
All my G devises still connect so just gonna leave router like i just set it up(N only)
Thanks.
Click to expand...
Click to collapse
my wireless g router (linksys WRT54G) shoots my phone at almost 10?
Don't use WEP, use WPA2 w/AES encryption
r34p3rex said:
Don't use WEP, use WPA2 w/AES encryption
Click to expand...
Click to collapse
I use the WEP as it allows me u use my own password witch makes it easier for me to tell my friends my code.
Is there a big speed diff or u just saying it to add more security?
These are my options.
Sent from my SAMSUNG-SGH-I897 using XDA App
Old Linksys WRT54GS -- WPA2, PSK, TKIP, CCMP
Seems as good as any of my laptops...
chvybeatsford said:
I use the WEP as it allows me u use my own password witch makes it easier for me to tell my friends my code.
Is there a big speed diff or u just saying it to add more security?
Click to expand...
Click to collapse
WPA2 Personal allows you to set your own password as well. WEP is VERY insecure. I'm not completely sure, but I think it only takes about a half hour, maybe less, to crack a WEP key by just monitoring the traffic in the air.
Yeah I can crack any wep key within about 2 minutes, whether there is any traffic on the network or not.
Sent from my PC36100 using Tapatalk
foil said:
Yeah I can crack any wep key within about 2 minutes, whether there is any traffic on the network or not.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Any tips? That's what my friend has and he's always a douche about letting people on, id love to hack into it on my phone.
Sent from my SAMSUNG-SGH-I897 using XDA App
aircrack-ng and a laptop (with supported wifi adapter) and you're good to go.
agentdr8 said:
aircrack-ng and a laptop (with supported wifi adapter) and you're good to go.
Click to expand...
Click to collapse
you just made my day. im gonna try it tonight when i go over there. thx
Hello,
I have a rooted Thunderbolt (stock rom), and I use the 4G on it to tether to both my Windows 7 PC and also my Roku player. I use the app "Android Tether" on my TB. I'd now like to use my PSP's WiFi capabilities to connect the two as well.
But I'm having some trouble. When I go into "Network Settings" on the PSP, I scan for access points. It DOES find the Android Tether network, but it's grayed out, and under the "Security" column is says "not supported." I have tried switching to both ad hoc mode AND infrastructure mode, but it doesn't seem to make a difference. Is there any way around this?
You may have to do it without the security settings in place on the tether side.
Sent from my ADR6400L using Tapatalk 2
Try wireless tether beta it works good
Sent from my ADR6400L using xda app-developers app
The PSP doesn't support a certain type of WPA encryption. WEP should work fine. The PSP just didn't have the hardware for newer WPA connections.
Raikalo said:
The PSP doesn't support a certain type of WPA encryption. WEP should work fine. The PSP just didn't have the hardware for newer WPA connections.
Click to expand...
Click to collapse
That's what I was thinking and that's why I suggested disabling it just to see if it works.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
That's what I was thinking and that's why I suggested disabling it just to see if it works.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
It does, it's just kinda touch-and-go. I think WPA-TKIP connections works, but not WPA-AES or something like that. WEP is much simpler. I finally just gave up on tethering to it at all.
I have a fiber optic internet connection at home and on my desktop PC I get download speeds of 80mbps+ however when I do a speed test on my note 10.1 I am lucky to get a downspeed on 3mbps. Does anyone have any ideas why this is and how to improve it?
I am in the UK and have the N8010 model.
Many thanks.
Its likely something with your router. Check the signal strength and channel.maybe a firmware upgrade on the router .are you connection to a/b/g/n all of the above will effect speeds and reliability.
Also is your PC hard wired.? If so you know it will be much faster there is far less overhead data tagging along.I do not think its the device
Good luck
erica_renee said:
Its likely something with your router. Check the signal strength and channel.maybe a firmware upgrade on the router .are you connection to a/b/g/n all of the above will effect speeds and reliability.
Also is your PC hard wired.? If so you know it will be much faster there is far less overhead data tagging along.I do not think its the device
Good luck
Click to expand...
Click to collapse
Thanks for the response. My router in running on Wireless N. Yes my PC is hard wired however im still getting at least a 50mbps downspeed on my Windows laptop via the wireless. I just figure it's something to do with the network card inside the Note?
I do have some problems connecting to certain networks with my tablet as well. Maybe there's some problem with wifi drivers in the galaxy note I'm guessing. Hopefully it'll be fixed in JB.
Sent from my SPH-D710 using xda app-developers app
Hi I and my wife we have the same problem we have NOTE 10.1 4.1.2 and after turn off and on again wifi we have good connection but after some times speed is downgrade to 2mb/s. Does someone know how to fix it ?
Sent from my GT-N8000 using XDA Premium HD app
Georgi65 said:
Hi I and my wife we have the same problem we have NOTE 10.1 4.1.2 and after turn off and on again wifi we have good connection but after some times speed is downgrade to 2mb/s. Does someone know how to fix it ?
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
One thing you can try is changing the encryption and/or privacy standard (WEP and so on) since some of them isn't supported by "dumb" devices and I suspect some of them are supported but are so advanced it affects the performance.
Sent from my GT-N8010 using xda app-developers app
Georgi65 said:
Hi I and my wife we have the same problem we have NOTE 10.1 4.1.2 and after turn off and on again wifi we have good connection but after some times speed is downgrade to 2mb/s. Does someone know how to fix it ?
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
Hi,
I had the same issue.
I solved setting the ip address to static (not dhcp) in wifi settings.
Now i get 20 mbits+ (consistent with my G router capabilities)
dREI
Sent from my GT-N8000 using Tapatalk HD
how to set it in note?mine worse... go up till 50kbps only....
tunchin said:
how to set it in note?mine worse... go up till 50kbps only....
Click to expand...
Click to collapse
Go to settings.
Select wifi
Long press on your connection.
Press modify connection
Now select ip settings and change to static
Now change your IP to an address outside of dhcp range and your done.
If dhcp is 192.168.1.2 through 192.168.1.100 set your tab to 192.168.1.101
You can also change your routers dhcp range to 192.168.1.2 through 192.168.1.15 and set your tab to ..16
Your numbers may be different, but same method.
Hi, I hope somebody can help me out. I have been unable to connect online for about a month now to my wifi. When I select the connection, it shows me full bars on the settings page but nothing afterwards.
I have no trouble connecting other devices to my wifi & right now it's just an expensive paperweight. I have no problems tethering with my phone & when I'm at the library with my pad, there are no problems connecting.
Nothing is customized & I'm on 4.2
Sent from my Nexus 4 using xda premium
I would try to disable password on your router and see if your tablet will connect then. If it does you might need to change the encryption on your router. Check what it is. If its WEP then change it to WPA2. Wifi doesn't have the best standards that are always followed by manufacturers and as a result sometimes things just won't connect.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
I have to reboot my router after changing ROMS sometimes . Have you tried rebooting the router or maybe even resting it?
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
That most definitely has to do with your router. Check if you can connect to another device that has uses wifi (Xbox, iPod touch, TV, laptop) & if the wifi is working fine there. It could also be that you put in the wrong password for the wifi on your tablet, & it is reading the connection, but not actually connected.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Hi, thank you for the suggestion. I changed the security from WEP to WPA2 & I was able to reconnect my tablet with no problems.
Sent from my Nexus 4 using xda premium
Hey all,
i am having some issues with my 5Ghz wifi and my skyrocket. First I will list all the information I have.
Skyrocket i727.
Roms I have tried to connect with - Embryo 7 Cymbaline and stock kernel ; Beanstalk 1.30 v.1. with mortez and marla. No luck.
Router - Linksys WRT320N - not a dual band. either 2.4ghz or 5ghz.
Open dd-wrt firmware on the router.
Wireless settings - N only (5Ghz) - 40mhz wide channel - lower - channel 52 + 54.
Security - WPA2 personal with AES encryption.
i have tired many things to get this wifi to connect on my skyrocket. I have tried switching to wirelss A and N. No luck. I have tried using on 20 Mhz wide channel. No luck. I have also tried taking Security off completely with Wireless N 5Ghz and no luck there either. Only way I can get it to connect is using 2.4 ghz. I know the skyrocket supports 5Ghz because there is an option for 5Ghz only within advanced wireless settings.
Any help or advice will be greatly appreciated. Thanks.
Have you tried it with stock? Also try scanning the channels with WiFi analyzer. They have an app that might help you connect.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
No I haven't tried it with stock. I do have WiFi analyzer installed and everything seems to work fine on the router end. I'm getting fantastic speeds on my laptop and my friends s4 connect instantly and gets great speeds as well. So I know its not the router settings. I have considered stock Though.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
But when you use Wi-Fi analyzer on the skyrocket, does the phone "see" the router. Have you tried restarting the router with nothing connected to it, and connecting the skyrocket first?
Edit: Try using different channels as well. Not sure exactly what channels the skyrocket can see in 5 GHz mode.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yeah it sees the channel on WiFi analyzer. I've tried channels 40,42 ,149 and many others. It seems to have a problem authenticating the WPA2 key. But, going by that logic, leaving the network open would solve the problem. But it doesn't. Still can't connect on 5ghz when there is no security. So, I'm thinking Its a custom kernel problem or the hardware is failing. Not sure which.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yeah I would say try another router someone else you know has that has 5ghz and using stock router firmware. Are you on the latest dd wrt?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yeah the latest as of like march 2013 I believe.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I am using a linksys e4200 dd-wrt build 22000
Here are some of the settings I use:
Basic settings:
wireless channel : 153 - 5.7654 GHz
Channel Width: 20MHz
Wireless Security:
Security Mode: WPA2 Personal
WPA Algorithms: AES
Advanced Wireless Settings: shown if different than default
CTS Protection Mode: Disable
Preamble: short
TX Power: 66 (lower than default)
Afterburner: enabled
You might try playing with the TX power setting since the default (for my router) is the same as the 2.4 GHz default and is to high for the 5 GHz band.
Well. I tried those settings but still a no go. I think its a problem with the 5ghz on my phone. Maybe I need to go back to stock JB. Not likely though. I resolved the issue by using two routers anyway. One for 2.4 and one for 5. Works perfect so far. Thanks for everyone's help and Input.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app